10.4.6 Upgrade and Quark 6.5 Problem on Intel iMac
Quark 6.5 refuses to start after the update. It bounces once and it dies.
I've repaired the preferences, cleaned the system, the kernel and user caches, but no go.
Anyone with a workaround?
Thanks Kurt. I removed those as well. Removed all extensions too.... Started in safe mode.... nothing worked.
Finally, I just deleted all Quark traces and then did a clean install of Quark, with all the upgrades. Now it works:-) Weird.
Similar Messages
-
Dual networks, express and extreme problem with Intel iMac accessing both
I have two airport networks setup to two different ISP's. One is setup using two Airport Expresses with a printer hung off one. The other is setup with an Airport Extreme with two USB disks.
I have a G4 iBook 14" laptop and a MacPro 17" Intel laptop that see and can bee switched between both networks utilizing Internet Connect. They are running OS X 10.4.11.
The other system is an Intel iMac 20" (late 2006) running OS X 10.5.1. The only wireless network it sees is the Airport Extreme. This is frustrating because I want to be able to switch to the Express network to print and cannot get the iMac to recognize the network. Before upgrading to 10.5.1, I could, on occasion, see the other network, now I can not.
Has anyone experienced this and is there a way to fix it? I believe it is operating in 802.11n, but have no way to verify this.I miss posted this in windows. I reposted this in the Airport Extreme.
-
6-15-2012 upgrade and browser flash video problems.
The 6-15-2012 upgrade for flash player v. 11.3.300.257 causes flash videos not to load in the firefox browser.
What can I do to remedy this situation besides rolling back to a previous version or disabling protected mode
permanently?
Flash content does not appear at all in my browser (firefox v. 5.0), and I do not have realplayer installed.
There is no crashing, error message, flash video content does not even appear. Changing browser settings and
preferences or disabling addons does nothing. This problem has never occured before the 6-15-2012 update.
The operating system is W7 64 bit.
Troubleshooting methods outlined on page http://forums.adobe.com/message/4468493#4468493 do not work.
Quote
"Finally, if these problems are blocking you from using Flash Player we recommend, as a last resort, you either
revert back to Flash Player 11.2 or temporarily disable Protected Mode. We strongly recommend that
Protected Mode is manually enabled once this issue is resolved." If I cannot resolve this issue then I
cannot manually re-enable protected mode. Again, is there any solution that does not involve rolling back to
an earlier version or disabling any sort of protection?RE: "We strongly recommend that
Protected Mode is manually enabled once this issue is resolved."
If I cannot resolve this issue then I cannot manually re-enable protected mode.
What they mean is when Adobe resolves this issue. So far, there's nothing the user can do if the protected mode is what is causing the problems.
If you look over the dozens and dozes of posts about this, you'll see that some progress has been made. The bug causing Firefox's "silent crashes" or crashes upon close-out has been duplicated, and according to some sources, has been "resolved," but so far, no patches or formal announcements have been made.
Since there seems to be a host of problems associated with Flash Player 11.3.300.257--conflicts with Real Player; constant crashes; excessive memory/CPU usage, etc.-- I'd imagine that Adobe will try to (hopefully) fix as many as possible in the next version.
In the meantime, we'll all have to wait it out using the earlier version or the new version that we--ourselves--have had to hack to disable "protected mode." Not knowing how vulnerable Flash Player is without the Protected Mode, I'm staying away from sites with Flash Content as much as possible. Unfortunately, since most of my browsing involves business related activities, and since many, many business related sites have some Flash content, this can be a challenge.
Ortho_Fan -
Tiger upgrade and/or Safari 1.1 export G4 iMac
I'm trying to upgrade my G4 iMac with SuperDrive to Tiger from 10.3.
When I get to the part about "verifying destination volume", it says there is an error and I should restart. Did that. Twice.
Then I tried doing a archive and install. Same result. My next move would be to do a clean install, but I would lose my Safari 1.1 bookmarks.
If someone knows how to export the bookmarks or how to get thru an archive & install, I'd appreciate the info.
thanks,
bobbieHello need411 and Welcome to Apple Discussions.
Boot from the Tiger DVD then, before you commence the install, go up to the menus (I forget the exact name of it but it's the most right hand menu from the left side of the screen if that makes sense). From there choose Disk Utility.
Click on Macintosh HD on the left hand side and then select Repair Disk. It's also worth Repairing Permissions.
Hopefully after that the 'destination volume' should be okay...
mrtotes
P.S. Safari Boomarks are in the file:
Macintosh HD > Users > <yourname> > Library > Safari > bookmarks.plist -
10.6.2 Upgrade and old Airport Card Problems
Not sure if related BUT after spending the day from heck recovering from my 10.6.2 upgrade, my G4 Cube which was in the wireless network with an old airport card I pirated from and old macbook will NOT join the network. Airport Ext is set to use WPA Personal or WPA2 as security.
Any ideas?no response at all
-
Any way I can convert Quark docs for viewing on Intel iMac?
Most of the important stuff is just letters so I wouldn't need to edit most.
When you go to Print, use the Copies and Pages pull down to select Print Settings. There's a button on the lower left marked PDF that will save it as a PDF in OS X format. That's under 10.4.4. On previous OS versions, I'm sure it was called Print to File or something similar. Apple have changed the names of some of the Print dialogs. Basically you are looking for the save to file options.
AFAIK, the PrinttoPDF XTension requires Adobe Acrobat to be installed (the full app not the Reader), if my memory serves me well. -
Nokia E71 firmware upgrade to 210.21.006 problems
I have just upgraded my firmware to the above version and now have the following problems; 1) the phone freezes 2) I cannot end an active call by pressing the red button but have to go to the menu and choose end active call. 3) the right soft key doesn't work in several apps. 4) the camera is now very slow to save image and yet again the right softkey (back) won't work and you have to press the home key and restart the camera between pictures.5) the phone has reset itself 7 times since the upgrade, during calls, internet or just on standby. Has anyone else upgraded and had the smae problems? the phone was fine before the upgrade and i only did the upgrade as it was supposed to have improved the camera and the audio quality. I have just re-installed the update to see if this amkes a difference. Here's hoping.
It’s now over 24 hours since I emailed Nokia and I haven't received a reply yet, not even an acknowledgement of the email. I think if I haven’t received a positive reply by Friday everyone that has problems should send a blanket email to Nokia (all sections of support) and see if they reply.
It would appear that Nokia are concerned with quantity of sales rather than quality of product and services
.I will post any response -
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
How can I remove this new Kitkat upgrade and go back to what I had. I cannot deal with the color on text screen and the keyboard is terrible. Can take back all the stupid pictures they added for texting. Just need it back to what it was.
Hasn't any business ever heard of the term.
IF IT AINT BROKE DON'T FIX IT. -
I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie
The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade. -
What is difference between Startup upgrade and startup migration.
what is difference between Startup upgrade and startup migration.
I am having the metalink note.
STARTUP MIGRATE was introduced in 9.2 as a mechanism to be sure that most everything that needs to be done to run an upgrade script or a patch script is done automatically. In the past, customers were expected to adjust certain initialization parameters prior to beginning an upgrade or applying a a patch,
but most of this is now done automatically by STARTUP MIGRATE.
When a customer starts a database in MIGRATE mode, the following ALTER SYSTEM
commands will be set automatically:
But i am not sure what exactly the meaning by startup upgrade.
and exactly the startup upgrade and startup migrate -
Could you remind me how to synch music back from my ipod to my computer - my ipod has my whole collection but my laptop has been upgraded and i lost my library
Follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
Someone please help me I have an iPhone 3GS version 4.2.1 8c148a and I downloaded slotmania this morning and it won't let me play it keeps asking if I want to upgrade and I can't upgrade because phone won't let me so I'm wanting to play my game I use to could play it and farmville but for some reason it won't let me play .... Can someone help me figure out something because I'm sure their is a way I can and husband won't upgrade me and I got free upgrade and can't even get because he's cheap it's sad Hugh
What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps. -
Upgraded to 5.5 last week and now having some problems...
Did a quick search for issues folks had when upgrading to 5.5, and didn't see mine in there anywhere. Unfortunately when 5.5 came out is when I was MIA on these boards, so I've missed a lot, and if these questions have already been addressed, I apologize...
Last week I upgraded from 5.0.3 to 5.5, ran all the updates (now at 5.5.2), and was told on launch that my graphics card (GTX-285) wasn't recognized, and that CUDA would be disabled (It had worked perfectly in 5.0.3). I did a quick driver update (version 8.17.12.7533 is what Windows update found) and all was well... CUDA was back in play.
This morning I ran my first video project since the upgrade, and found everything worked as normal... until the export. I have just a basic 12 minute 720p30 timeline (choose an XDCAM-EX preset since that's what I most commonly work in) filled with still images (60frame duration, automated to the timeline, with 10frame cross-dissolves) and a music bed--it's a slideshow of our 2012 runs at the local fire department where I work part time. I choose the Vimeo HD export under H.264 since I've found that gives me the cleanest picture with a decently small file size (orginal images totalled 1.5GB). I ran the export twice--once in HD and once in SD, since some of the guys don't have computers that can handle the HD stream. Everything seemed to go fine. I tried playing back the HD file just to verify that it was okay since I would be showing it at our Christmas dinner tonight, and found that after the opening two title slides, the pictures were a complete mess. Most of the time it didn't show them at all, and when it did it didn't show them properly. So I checked the SD version, and it had exactly the same issue. Music on both tracks played along just fine, however. I tested both files in four media players (Nero, Quicktime, Windows, and Chrome) and all four (on two computers) showed the same issues.
I had worked the project with EVERYTHING (project file, stills, music, etc.) sitting on my desktop, which I know is a no-no. So I moved the stills and music to my data array, moved the project to my export disc (my project array is down right now, pending a new disk arriving tomorrow) and then tried again doing the Vimeo HD export. This time I got about 60 seconds into the export process and got thrown an error from the NVIDIA OpenGL driver saying "Your hardware configuration does not meet the minimum specifications needed to run the application. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code: 7." I hit "OK" and ultimately had to reboot the computer before I could get Premiere to open again.
I reopened the project, turned CUDA off, and redid the Vimeo HD export after rendering my timeline, and the finished product (which took 65 minutes to export instead of the original 14) looks perfect.
Just for kicks I tried it again just now with CUDA back on, and got the same error.
Anybody know what's going on?Hmm... Ok, so I took that project and tried importing it to a new project, still with no luck. Then I tried taking that project and creating a new timeline by dragging one of the stills to the new item icon so that I'd get whatever PrPro decided was the best timeline, and still no luck. Then I tried creating a new project and importing different footage and it worked. Tells me perhaps there's something wrong with the stills? I know not to use overly-large stills in a project, but they're all around 4k resolution or smaller... so surely that's not too big, right? 412 stills total 1.5GB which means an average of about 2.5 MB per file... certainly not too big. I even had a couple video clips in the timeline that were shot with a point-and-shoot still camera, and I tried taking those out just in case it was something in those, and still no success.
So, ultimately this project got exported without CUDA, and I'm okay... but I also am wondering what caused the problem? I do a fair amount with stills (not a lot, but enough) and I need it to work... do I just go on with life, assuming that it was some weird fluke? Or do I try a complete wipe and reinstall of OS and Programs?
Oh, one other tidbit... whenever PrPro crashed and closed, the application itself wouldn't close. I have to go into the program manager and force quit it...
Thoughts? Recommendations?
Maybe you are looking for
-
Session control via terminal services
I have an application running like a dream using JSP and server side session control. One paricular user has an environment where all PCs are linux based and running a terminal service from a Microsoft SBS server. These PCs are unable to maintain ses
-
I bought my macbookpro in may 2007, will it work with Mountain Lion? Model Name: MacBook Pro Model Identifier: MacBookPro2,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.33 GHz Number of Processors: 1 Total Num
-
Adding JTable on an image..............??help need.....edited
i am using JFame on JFrame i hav added JTabbedpane.... on one of the tab i hav added image on whole background.... on that tab i hav added JTable.... but when i add JTable on that tab .....instead of adding table on that image...it add image on backg
-
Subvi should get instantly value from main vi during execution of sub vi
Greetings Johannes Using LabVIEW 7.1 and 2009 recently Solved! Go to Solution.
-
Upgrade to PS-CS6 from CS3 - legit?
I found an upgrade package for photoshop CS3 to upgrade to CS6 on motionmedia.com that costs $200. Is this a legitimate upgrade, and will it work? The URL is http://www.motionmedia.com/Adobe-Photoshop-CS6-Upg-from-CS3-or-newer-p/65158686ad01a00.htm