10.4.7 mail/exchange problem (not proxy related like everyone else)

Hi, I have had a problem related to mail and my exchange server since upgrading to 10.4.7, and it is not the socks proxy problem others are having...
The setup:
I use Mail to access my .mac, one POP, and one Exchange server, and have a number of rules that take 100% of my messages from all three servers and distribute them to various mailboxes local to my mac.
What works:
Everything. I can send/receive mail, connect to all servers, etc. I have no problems in this regard.
What doesn't work:
If my "Inbox" mailbox in Mail is NOT the active mailbox (meaning my focus is on some other mailbox/folder), every few minutes my dock icon gets the red "1" new message icon, and the inbox shows the "1" in the circle next to it, but when I click on the Inbox both notifications disappear, and there is no new message. The icon does not bounce, either. When I have the Inbox opened, the new message is over the exchange folder of the inbox, so I know it is somehow related to exchange. This behavior started immediately following the 10.4.7 upgrade.
If my Inbox is the active mailbox, I never get this new mail notification.
Other things of note:
I have a blackberry that is connected to the same exchange server and is not experiencing any problems. The blackberry is not set to reconcile, so it just acts as a client and does't perform any server ops. No server changes were made, and my client configuration has remained the same for months.
Seems like a 10.4.7 bug to me, but I figured I would try this out first. Any help would be appreciated.
Thanks!
-Matt
17" MacBook Pro Mac OS X (10.4.7) 2GB RAM

Matthew. In my Exchange account on Mail.app I have the same occurrence with two folders. 1) In Publicfolders/CompanyName Contacts I always have a message showing - because Exchange recognizes the folder as a mail folder, but cannot parse the contents (The sole contact on the server) as an email. When I open the folder the notification disappears. Close the folder and it reappears. 2) In Inbox when the Exchange server registers a System Administrator - Undeliverable Message response. My Inbox tells me the email is there, but for some reason Mail.app cannot display these messages. Close the folder and it reappears. Sometimes!
I cannot fix the contacts notification and have learned to live with it, with the Inbox, I log onto the Exchange server through OWA and delete the message off the server. Problem disappears. Chances are there may be an email on your server that mail.app knows is there, but cannot - for whatever reason - display.
Does your Blackberry show a message that Mail.app doesn't?

Similar Messages

Mail - Exchange access via Proxy

Hello!
I'm using Mac OS X 10.6.1. with Mail Version 4.1 (1076).
Setting up the connection of an Exchange 2007 mail server in an intern network works great.
Now I want to have access from outside/external.
The Windows setup is via a proxy server.
In Mail I do not find such a setting. Only "external server", but this doesn't work.
With this setting I get the error (console):
Mail[141] -[SOAPParser:0x119d12360 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for HTML (HTML)
What's wrong here? What could I do so I can get access from extern via the proxy (ssl)?
Thanks a lot in advance & regards.

Oh sorry
Well, Exchange 2007 uses the Autodiscover record you can setup in your DNS. You just make a CNAME that points to the exchange server.
With that,you can just open up your Mac Mail client and set your Display name, email address and password. Then the mail client will go out and find the settings to connect to your Exchange server. once connected, no matter where you are, you just open up your mac mail client, and as long as you have an internet connection, you will be connected to your exchange server.
It is a lot better then opening up a port in your firewall.

"Message ... could not be moved" Mail/Exchange problems

I know this has been discussed before, but I am not sure it applies for Snow Leopard Exchange mail. I have messages in my inbox in Mac Mail that I cannot move or delete. I get the error message above stating "An error occurred while moving messages to mailbox...". The console reports this when I make the attempt:
3/1/10 3:54:08 PM Mail[5466] * Assertion failure in -[EWSGateway resolvedIdStringForIdString:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSGateway.m:1548
Temporary ids should never be used while online. Got temp-015642e6-9ce5-4610-8ad5-963008b599ee.
0 Message 0x00007fff81608119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff8160807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff81553b68 -[EWSGateway resolvedIdStringForIdString:] + 186
3 Message 0x00007fff8154c8cc -[EWSCopyItemsRequestOperation prepareRequest] + 394
4 Message 0x00007fff81568f93 -[EWSRequestOperation executeOperation] + 60
5 Message 0x00007fff81616347 -[MonitoredOperation main] + 229
6 Foundation 0x00007fff81d0c06d -[__NSOperationInternal start] + 681
7 Foundation 0x00007fff81d0bd23 ___startOperations_block_invoke2 + 99
8 libSystem.B.dylib 0x00007fff85bf9ce8 dispatch_call_block_andrelease + 15
9 libSystem.B.dylib 0x00007fff85bd8279 dispatch_workerthread2 + 231
10 libSystem.B.dylib 0x00007fff85bd7bb8 pthreadwqthread + 353
11 libSystem.B.dylib 0x00007fff85bd7a55 start_wqthread + 13
3/1/10 3:54:08 PM Mail[5466] * Assertion failure in -[EWSCopyItemsResponseOperation handleResponseMessage:withObject:], /SourceCache/Message/Message-1077/MessageStores.subproj/EWSResponseOperation.m: 420
Mail did something wrong: Id is malformed. on EWS response <EWSCopyItemsResponseOperation: 0x111202ff0> (EXECUTING)
0 Message 0x00007fff81608119 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff8160807e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff81569eb2 -[EWSResponseOperation handleResponseMessage:withObject:] + 2295
3 Message 0x00007fff8154ce6b -[EWSCopyItemsResponseOperation executeOperation] + 363
4 Message 0x00007fff81616347 -[MonitoredOperation main] + 229
5 Foundation 0x00007fff81d0c06d -[__NSOperationInternal start] + 681
6 Foundation 0x00007fff81d0bd23 ___startOperations_block_invoke2 + 99
7 libSystem.B.dylib 0x00007fff85bf9ce8 dispatch_call_block_andrelease + 15
8 libSystem.B.dylib 0x00007fff85bd8279 dispatch_workerthread2 + 231
9 libSystem.B.dylib 0x00007fff85bd7bb8 pthreadwqthread + 353
10 libSystem.B.dylib 0x00007fff85bd7a55 start_wqthread + 13
I believe these were messages that were deleted on the Exchange server due to company SOX policies.
I have attempted to take Mail offline and delete the mail and go online after, but the messages just reappear! I am willing to start with a fresh inbox and rebuild, but I do not want to lose messages in Mail in other folders that have been cleared from the Exchange server for obvious reasons.
I tried removing Inbox.ewsmbox from my mail server folder under /Users/mlitwin/Library/Mail/<server-account-name> but that didn't do what I hoped it would. I also tried removing the Envelope Index but those messages remained in place. Is there some other way to clear them out? Do I just have to do both at the same time? Since it takes nearly a day for Mail to process all this I don't want to try this if this is the wrong approach.

In Mail.app, try using the "rebuild" item under the Mailbox pull down menu to rebuild the index.

Mail & Exchange problem - cannot connect to exchange server

I am having a problem configuring MS exchange on Mail 5.2. I am not able to connect to exchnage server. The error message is consistent
MFEWSErrorDomain error 56
I can connect to the same server using Mail on iPhone 4 but from what I understand iOS and Lion use different protocols?
Thanks
Console log files
6/24/12 9:52:58.849 AM Mail: *** Assertion failure in -[EWSConnection sendMessage:forRequest:], /SourceCache/Message/Message-1278/MessageStores.subproj/EWSConnection.m:489
Didn't recieve a response for EWS request <EWSGetFolderRequestOperation: 0x7f8034b86540> (EXECUTING)
          0   Message                             0x00007fff8862eef8 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 116
          1   Message                             0x00007fff8862f08e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 185
          2   Message                             0x00007fff8855d7cc -[EWSConnection sendMessage:forRequest:] + 1721
          3   Message                             0x00007fff8856ddff -[EWSGateway sendMessage:forRequest:] + 75
          4   Message                             0x00007fff8857e54c -[EWSRequestOperation executeOperation] + 108
          5   Message                             0x00007fff8864f97f -[MonitoredOperation main] + 228
          6   Foundation                          0x00007fff8a5b06b4 -[__NSOperationInternal start] + 705
          7   Foundation                          0x00007fff8a5c3912 ____NSOQSchedule_block_invoke_2 + 124
          8   libdispatch.dylib                   0x00007fff8f4e5a86 _dispatch_call_block_and_release + 18
          9   libdispatch.dylib                   0x00007fff8f4e6965 _dispatch_worker_thread2 + 255
          10 libsystem_c.dylib                   0x00007fff8e0f33da _pthread_wqthread + 316
          11 libsystem_c.dylib                   0x00007fff8e0f4b85 start_wqthread + 13
6/24/12 9:52:58.851 AM Mail: *** Assertion failure in -[EWSGateway fetchDistinguishedFolderIdsWithConnection:], /SourceCache/Message/Message-1278/MessageStores.subproj/EWSGateway.m:333
Didn't get a response for all folder ids, expected 10, got 0
          0   Message                             0x00007fff8862eef8 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 116
          1   Message                             0x00007fff8862f08e -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 185
          2   Message                             0x00007fff8856dca2 -[EWSGateway fetchDistinguishedFolderIdsWithConnection:] + 1356
          3   Message                             0x00007fff88559bc7 -[EWSAccount authenticatedConnection] + 1042
          4   Message                             0x00007fff885587c8 -[EWSAccount _synchronizeMailboxListWithUserInput:] + 72
          5   Message                             0x00007fff885591b4 -[EWSAccount synchronizeAllMailboxes] + 78
          6   Message                             0x00007fff884e7430 -[RemoteStoreAccount _synchronizeAccountWithServerWithUserInput:] + 651
          7   CoreFoundation                      0x00007fff908cbefc __invoking___ + 140
          8   CoreFoundation                      0x00007fff908cbd94 -[NSInvocation invoke] + 132
          9   Message                             0x00007fff8847bf68 -[MonitoredInvocation invoke] + 196
          10 Message                             0x00007fff88458a79 -[ThrowingInvocationOperation main] + 33
          11 Message                             0x00007fff88458a1f -[_MFInvocationOperation main] + 449
          12 Foundation                          0x00007fff8a5b06b4 -[__NSOperationInternal start] + 705
          13 Foundation                          0x00007fff8a5c3912 ____NSOQSchedule_block_invoke_2 + 124
          14 libdispatch.dylib                   0x00007fff8f4e5a86 _dispatch_call_block_and_release + 18
          15 libdispatch.dylib                   0x00007fff8f4e6965 _dispatch_worker_thread2 + 255
          16 libsystem_c.dylib                   0x00007fff8e0f33da _pthread_wqthread + 316
          17 libsystem_c.dylib                   0x00007fff8e0f4b85 start_wqthread + 13

YAY MEEEE!!! After hours of looking for this i Have figured it out.
Log into the OWA actt. (Web Outlook) and hit the ? mark in the right hand corner > About.
Grab the data in the about page. Complete your wizard and when you get the auto discovery error message and it requests the server name copy the HOST ADDRESS - not the "Exchange Client Access server name"
Thank ou KK Pan, Csound1, and this guy here http://eightwone.com/2013/01/26/the-case-of-the-not-updating-outlook-for-mac/ for leading me down a path to discovering this.

Mail exchange problem with new iphone

My home button stopped working so I went to the store and got myself a new iphone under warranty (Thanks apple).
It is running version 4.3.4
Anyhow, when I got home and restore from backup, everything works beautifully. However, the only problem is that I can't sync my hotmail using exchange. My Gmail is set under exchange as well and it works fine.
I have tried the following but it didn't work
==============================
I deleted and re-entered the account info, though everything are 100% correct, I still getting the "Unable to verify account info.". If I save the profile and open "mail" the message "Cannot Get Mail" would pop up
Re-formating the phone doesn't work either
I installed EAS Default task timeout profile, which I found online and it didn't work either
Any help would be appreciated, thanks

Basic troubleshooting from the manual is:
Restart
Reset
Restore
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
You can make an appointment with the Genius Bar if you have tried these and they have not worked. If they determine your iphone to be defective, they will replace.
You can also call 800-my iphone for assistance.

Claws-mail 3.4.0 problem (not libetpan related).

After the upgrade of claws-mail does not start anymore.
It shows a brief white flash and it stops. The process seems running and the --debug log quite normal.
I use a x86_64 archlinux.
Now I try to downgrade.
Any idea?
$ claws-mail --debug
claws.c:98:Starting Claws Mail version Claws Mail 3.4.0
main.c:833:GTK+ 2.12.9 / GLib 2.16.3
main.c:841:Compiled-in features:
main.c:846: compface
main.c:852: aspell
main.c:864: ipv6
main.c:870: iconv
main.c:882: ldap
main.c:888: libetpan 0.54
main.c:900: libsm
main.c:912: openssl
prefs_gtk.c:1034:new file '/home/ezzetabi/.claws-mail/clawsrc'
prefs_gtk.c:993:new section 'Common'
prefs_gtk.c:993:new section 'Plugins_Common'
prefs_gtk.c:993:new section 'Plugins_GTK2'
prefs_gtk.c:1034:new file '/home/ezzetabi/.claws-mail/folderitemrc'
prefs_gtk.c:972:cache: /home/ezzetabi/.claws-mail/folderitemrc: No such file or directory
prefs_gtk.c:1072:destroying cache
main.c:2325:/dev/mem_notify not available (No such file or directory)
current dir: /home/ezzetabi
prefs.c:283:Found [Plugins_Common]
current dir: /home/ezzetabi/.claws-mail
current dir: /home/ezzetabi
folder.c:121:registering folder class mh
folder.c:121:registering folder class imap
folder.c:121:registering folder class news
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Common]
prefs_gtk.c:147:Finished reading configuration.
prefs_themes.c:366:Creating preferences for themes...
stock_pixmap.c:549:dir /home/ezzetabi/.claws-mail/themes not found, skipping theme scanstock_pixmap.c:549:dir /usr/share/claws-mail/themes not found, skipping theme scanprefs_actions.c:390:Reading actions configurations...
prefs_display_header.c:432:Reading configuration for displaying headers...
addressbook.c:4068:Reading address index...
addressbook.c:4117:done.
mainwindow.c:1547:Creating main window...
toolbar.c:728:read Toolbar Configuration from toolbar_main.xml
folderview.c:644:Creating folder view...
folderview.c:479:creating tree...
hooks.c:70:registed new hook for 'folder_update' as id 1
hooks.c:70:registed new hook for 'folder_item_update' as id 1
summaryview.c:633:Creating summary view...
hooks.c:70:registed new hook for 'msginfo_update' as id 1
hooks.c:70:registed new hook for 'folder_item_update' as id 2
hooks.c:70:registed new hook for 'folder_update' as id 2
messageview.c:437:Creating message view...
headerview.c:89:Creating header view...
noticeview.c:77:Creating notice view...
mimeview.c:249:Creating MIME view...
noticeview.c:77:Creating notice view...
textview.c:269:Creating text view...
hooks.c:70:registed new hook for 'msginfo_update' as id 2
logwindow.c:94:Creating log window...
hooks.c:70:registed new hook for 'log_append_text' as id 1
logwindow.c:94:Creating log window...
hooks.c:70:registed new hook for 'debug_append_text' as id 1
mainwindow.c:1825:done.
mainwindow.c:3206:Setting widgets... mainwindow.c:3428:done.
hooks.c:70:registed new hook for 'sslcert_ask' as id 1
hooks.c:70:registed new hook for 'progressindicator_hooklist' as id 1
account.c:198:Reading all config for each account...
account.c:213:Found label: Account: 1
account.c:213:Found label: Account: 2
account.c:213:Found label: Account: 3
codeconv.c:1438:current locale: en_US.utf8
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 1]
prefs_gtk.c:147:Finished reading configuration.
prefs_customheader.c:325:Reading custom header configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 2]
prefs_gtk.c:147:Finished reading configuration.
prefs_customheader.c:325:Reading custom header configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:122:Found [Account: 3]
prefs_gtk.c:147:Finished reading configuration.
prefs_customheader.c:325:Reading custom header configuration...
folderview.c:392:setting titles...
folderview.c:807:Setting folder info...
summaryview.c:1237:empty folder ((nil) (null) (nil) 0)
summaryview.c:1257:TIMING summary_show : 0s001ms
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
prefs_gtk.c:85:Reading configuration...
folderview.c:807:Setting folder info...
folderview.c:807:Setting folder info...
prefs.c:283:Found [Plugins_GTK2]
prefs_gtk.c:1069:no cache
main.c:1510:TIMING main startup: 0s544ms
I pressed CTRL-C
main.c:2258:Quitting on signal 2
main.c:1551:shutting down
mainwindow.c:2573:main window position: 0, 0
prefs_gtk.c:286:Found [Common]
prefs_gtk.c:330:Configuration is saved.
addressbook.c:4280:Saving address books...
addressbook.c:4283:Exporting addressbook to file...
prefs_themes.c:411:Finished preferences for themes.

Thanks for the answers so far. Thank You, leonieDF, your anwer helped me to see it clear what's about Aperture and Portrait Professional. I have to wait for an update for PP. And the same is to you, William
Actually I help myself by using PP as an external editor in Aperture. After using PP I have to import the edited Pic back to Aperture. I's not very funny but there is no other way at the moment.
But I don't understand why the synchro with Facebook does not work for me. Has anyone the same problems with Aperture and Facebook? Details: uploading to FB is working fine - but Aperture has got problems when I try to synchronize older FB gallerys of my Account.

Mail Exchange settings not working

I'm trying to setup Apple Mail to use an exchange server instead of imap. The settings I'm using aren't working. The same account works fine on the iPhone- any reason why this isn't working?
thanks for the help

@kasheets;
What server settings are you trying to use? Please don't post login information, but everything else you can give us will be helpful in trying to troubleshoot your issue.
Things to include:
1) incoming mail server (should be the same as the webpage you log in with, minus the /owa or /exchange - tell us which one)
2) Domain
3) User mask (sometimes different than email address, may need to check with IT to be sure)
Also, if your company uses a secure server and has a self-signed certificate, you would need to be sure to install all layers of the certificate to your device. Your IT department can help with this also.
Life moves fast. Don't miss a thing.
TreoAide

Urgent: Customized Routine Problem: Not updating related databse tables.

Hi Gurus,
We made some changes in customized routine of pricing condition type.
Requirement :
"A" condition type which is appearing in pricing of sales order which we want to be split into Billing document i.e.in Invoice. The amount should split as per the invoiced quantity,. Earlier it was redeterminig from condition master"
Logic in routine:
"we are checking respective sales order for Invoice. From Sales order value we are finding out document condition number in VBAK table. then in KONV table for respective value we are checking "A" condition type is available or not.
If it is available we are just copying the value and depending upon the Invoiced qty, We are passing to the same condition type.
Problem:
Value is appearing in Invoice document but it is not updating the related database tables e.g. KONV for(Invoice document condition No.)

Hi Gurus,
We made some changes in customized routine of pricing condition type.
Requirement :
"A" condition type which is appearing in pricing of sales order which we want to be split into Billing document i.e.in Invoice. The amount should split as per the invoiced quantity,. Earlier it was redeterminig from condition master"
Logic in routine:
"we are checking respective sales order for Invoice. From Sales order value we are finding out document condition number in VBAK table. then in KONV table for respective value we are checking "A" condition type is available or not.
If it is available we are just copying the value and depending upon the Invoiced qty, We are passing to the same condition type.
Problem:
Value is appearing in Invoice document but it is not updating the related database tables e.g. KONV for(Invoice document condition No.)

Boot problems, not software related (dual 1.25ghz MDD)

Ok, I have a dual 1.25 ghz MDD w/2GB of ram, airport- everything that could get thrown on it OEM.
I bought it about 3 months ago, used, and had problems with it not booting. I took it into a local apple shop twice, the 2nd time they did a fresh install of Tiger (10.4) and sent it home with me hoping that fixed the problem.
Now, I can use the computer for anywhere from 5 minutes after boot, to several hours after boot- and it will work ok. However, no matter what, after a while- the clock will stop working and the computer would freeze shortly after.
The shop tested the computer with: The Apple hardware test CD, norton, techtool, diskwarrior- all did not find any hardware problems. The OS has been reinstalled several times with 10.4 retail CDs.
In going around online, I found people with similar problems which ended up being a bad processor module. In fact every person I could find on varrious boards who had this happen, had it happen to their dual 1.25ghz model specifically (not the dual 1ghz or dual 867, etc).
Is this a design flaw or production flaw with the processors? I can't afford to put any more money into this machine, which is now a $1,500 (1,700 if i count the shop fees) paper wieght. I can not use something that randomly crashes this often. Does anyone know where I can get replacement processor modules?
The shop I bought it from has ignored me since the week I got the machine, and their 90 day warrety ran out about 2 weeks ago (go figure). so I am effectively in a hard spot right now. Does Apple have any policey reguarding how their retailers conduct themselves?

Ok, here are my responses to this thread:
1) Already tried the ram route, I have 5sticks of 512mb, all mac/apple ram, tried each stick in there by its self in case maybe more than one stick was bad. Again, no solution there, the shop that did the recent attempt at the computer did bench test the ram and found no problems- I think ram can be ruled out.
2) Tried taking out everything non-OEM/stock on the computer- airport card, etc- again, this made no difference.
3) The OS was put on the 2nd time after the Nortons et al were used, again- this is not a software problem. No kernel panics, etc. No processes are causing the crash, and it makes no difference if I am in OS9.2, OS 10.2, 10.3 or 10.4 (I own retail cds/disks of every major mac OS release sice sys2).
4) Powersupply is good and working perfectly
5) So far its looking like the processor module and/or logic board is in deed bad, since everything else has been ruled out.
The shop that I bought it from is still by and large ignoring me, what would be the procedure to report them? It sounds to me like they knew the unit was bad, hence why they blew me off until their 90 day warrenty expired.

HT5114 How can a responsible eleven year old use an i-pod? I do not want to begin with the idea that it is okay to change the year of your birthday like "everyone else does". What can be done in an honest way?

How can a responsible eleven year old use an ipod? I do not want to 'follow the flow' as I have been instructed to do by other parents in order to obtain an apple id for her by changing her birth year. I believe in truth. I believe that even a 'little white lie' simply adds a burden in our childrens hearts and allows them to think it is okay. As I was told, "It is okay, how is Apple going to find out?" I do not want to travel that path. Her friends have ipods, our 9 year old cousin has an ipod....Help, Honest Mom in need of a solution.

She can use an iPod. She just can't have her own account in the iTunes Store. The restriction is on using the iTunes Store, not on using apps or playing content purchased from it. You just need to set up an iTunes Store account and buy items for her rather than having her do it on her own.
Regards.

Ipod problem, just like everyone else!

If there is a fix to this frozen button issue, can someone please fill me in...?!?! My ipod is in mint condition, and yet one day I went to use it and the click wheel was frozen. The lock works but that's it! This is the second time this has happened, and it leaves me stranded for about 2 months before it starts working again. It seems to have happened when I left it charging to full capacity. I know this is a common issue, as every person I seem to come across has had freezing issues with their ipod.
Nothing works so far to correct this issue, the 5 steps, resetting, formatting, restoring, Nothing!
If somebody has the answer please post it for the entire world to see, perhaps on apple or itunes homepage.
(Oh, along with this I've NEVER downloaded illegal music and therefore I have over $200 worth of itunes music I can no longer use on my waste of an ipod.)
<Edited by Moderator>

If there is a fix to this frozen button issue, can someone please fill me in...?!?! My ipod is in mint condition, and yet one day I went to use it and the click wheel was frozen. The lock works but that's it! This is the second time this has happened, and it leaves me stranded for about 2 months before it starts working again. It seems to have happened when I left it charging to full capacity. I know this is a common issue, as every person I seem to come across has had freezing issues with their ipod.
Nothing works so far to correct this issue, the 5 steps, resetting, formatting, restoring, Nothing!
If somebody has the answer please post it for the entire world to see, perhaps on apple or itunes homepage.
(Oh, along with this I've NEVER downloaded illegal music and therefore I have over $200 worth of itunes music I can no longer use on my waste of an ipod.)
<Edited by Moderator>

HT4969 How come I do not have Reminders on my iCal? Why is it a seperate program and how can I merge the two, much like everyone else seems to be able to do?

The title says it all. I want Reminders "To Do" program on my iCal. The seems like a common sense method of organization. Is it just my Mac that is jacked up or is this an update that divided the two programs?

As of the latest ios version, Reminders are a separate entity, and you use the Reminders app to set reminders.

Mail / Exchange 2013 weird behaviour?

I’m hoping someone here can help with weird behaviour from Mail which is driving me nuts. It doesn’t appear to be the same problem as the odd Exchange behaviour described in other threads. It appeared about a month back, and I had made no changes to my software or hardware at that time.
I have the latest version of OSX Mail in Mavericks, set up with an Exchange 2013 and iCloud mail accounts. There are no extensions or add-ons running. I have two Macs and two iOS devices on these accounts, all fully updated. The problems exist regardless of which devices are powered up at any one time. Mail is set to download messages automatically.
On both of the Macs I get the same following problems:
- When new messages arrive, the mailbox notifier indicates the new messages, but they are not shown in the message list. If I select the ‘Exchange’ inbox they are visible, and remain so when I switch back to the combined ‘Inbox’.
- When I select the ‘Exchange’ inbox, rather than the combined ‘Inbox,’ then after 30 seconds or so the ‘From’ field in the message list changes to ‘To’, so all the senders are shown as my email address.
- The entire send/receive function seizes up half a dozen times a day, necessitating a Force Quit to restart the app.
iOS devices work just fine.
Is this in fact the same as the reported Exchange problems, or have I got something else going wrong here? I’ve tried deleting and recreating the account, and also had my hosted Exchange provider take a look, to no avail.
Many thanks,
Tobes

Hi Ivan,
It is really an odd issue. Working for a while, then crash.
According to your description, I found that we suspect it is a certificate issue.
If this issue really related to the certifcate mismatch or something additional, it shouldn't connect to Exchange server, even just for a while (As we
encountered).
I suggest double check our ECP VD configuration and Authentication method. Steps as below:
1. Please try to re-build ECP Virtual Directory, commands as below:
a. To remove current ECP VD:
Remove-EcpVirtualDirectory -Identity "Server01\ecp (default Web site)"
b. To check whether the Remove operation completed successfully:
Get-EcpVirtualDirectory -Server Server01
c. To create a new ECP VD:
New-EcpVirtualDirectory -Server SERVER01 -ExternalURL https://mail.contoso.com/ecp -InternalURL
https://mail.contoso.com/ecp
2. Please verify that the Microsoft Forms Based Authentication service is running on all Exchange servers.
a. To check:
Get-EcpVirtualDirectory -Server <server name> | fl *auth*
b. To enable:
Set-EcpVirtualDirectory -Identity "Server01\ecp (default Web site)" -FormsAuthentication
$true
3. Please also make sure the remote apps are all installing the trusted certificate.
4. Please also collect detailed App logs or error message in event viewer for the further troubleshooting.
Maybe I have not enough experiences, I am not sure whether the logs above that we provided is useful. Maybe others have different opinions.
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

E-mail notification does not work. PX12-400r

E-mail notification does not work. Test message fails, like everyone else. Is that possible? Someone else had this problem?

Hello gusev67
Have you tried with/without custom email notification (SMTP) settings?
Have you checked if the defaut or custom SMTP port has been forwarded to your px12?
Have you checked if your ISP is blocking SMTP ports for your connection?
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
When I try to configure Outlook profile for the user, I manually enter exchange server name and user name.
Check User button underlines server name and user name and profile gets created successfully.
Once I try to open outlook for the user I get
Cannot open your default e-mail folder. Microsoft Exchange is not available. Either there are network problems or the Exchange computer is down for maintenance
If I search the content of the log files under
X:\Program Files\Microsoft\Exchange Server\V15\Logging\RPC Client Access
I can’t find any records indicating a connection attempt from the client’s IP or references to the version of the outlook used, however I can see a 3 way handshake followed by a 4 RCP packets and then 4 nspi bind requests and responses when outlook opens
up and then connection is torn down.

Windows Server 2012 R1 with Exchange 2013 SP1
Windows XP SP3 with Outlook 2010 (14.0.4760.1000) computer is on the same network, but not a part of the domain.
Hi,
That version of Outlook 2010 (14.0.4760.1000) is not supported with Exchange 2013 and will not be able to connect. It need to be on at least SP1 +
Outlook 2010 November 2012 update (14.0.6126.5000)
See: Exchange 2013 System Requirements -
Client Support
Martina Miskovic

10.4.7 mail/exchange problem (not proxy related like everyone else)

Similar Messages

Maybe you are looking for