10.4.7 printer setup utility not working

I have an eMac with a USB connection to a HP officejet 5610xi AiO printer. Until about 2 weeks ago, (when I believe we updated to 10.4.7) all was well. After manually uninstalling the HP software, reinstalling from the downloads and the CD, I still can't add the printer. HP support thinks I may have a problem with printer setup utility. When I have downloaded their software, it gets stuck for over five minutes in the printer plug ins install before it finishes. When I try to run set up, it gets stuck on the fax set up page before it says it's finished. When I try to add the printer the printer browser finds the printer through the USB connection, but it won't let me add the printer.

I ran the repair hard drive. Seemed like it might have repaired things too fast. Only took a few seconds. Tried reinstalling a new 10.4.7 combo update just now and got an error message at about 80% complete. Earlier I ran the quick and extended hardware test and found no problems.
I can't find my backup drive, the computer lists my firewire connection as "unknown device."
Instead of having selection/dialog boxes highlighted in blue, sometimes there is a thick black box instead.
Last night, about five applications including safari and finder stopped responding. I couldn't force a quit either.
This morning applications like quicken, palm, iTunes, and appleworks won't open because of a "shared library" error message.
Should I just give up and take everything to the shop?
Thanks,
Terri

Similar Messages

  • Printer Setup Utility not working and autostopping jobs for an HP

    I have both an Epson Stylus R200 and an HP Photosmart 2570 series all-in-one. the epson prints fine, but the HP doesn't at all. it keeps stopping the jobs i send to the HP. The HP is also a scanner and i can do scans so i know its not a problem with the physical USB connection.
    To attempt to fix this problem, i try to open the Printer Setup Utility. I've tried to open the utility 3 seperate ways. 1) from the menu item "utility" in th e HP printer dock item
    2) from "Utilities/PRinter Setup Utility
    3) from System Preferences "Printing/Faxing>setup printers"
    still the utility appears to be running on my dock, and the menus on the top appear (Edit View Printers Windows Help) simply won't drop down and let me use the Utility.
    is my Printer Setup Utility COrrupted? if so, where can i find a replacement download without reinstalling Panther?
    i searched the apple downloads to no avail.
    restarting now.
    any help is appreciated. thanks
    G3 minitower 370 MHz   Mac OS X (10.3.9)   [email protected]

    thanks for your repsonse greg, however this is not resolved.
    ok, i know ive got the 10.3.9 update installed successfully. in fact, i decided to reinstall OS X completely and update from there. this took much time. i backed up all system files manually and erase and installed OS X. i am having multiple problems still as a result, such as dreamweaver m not booting, but that goes beyond the scope of this help thread.
    but, i can finally open the Printer Setup Utility. i did not find my old R200 drivers so I reinstalled the R200 driver. I also ran the HP all-in-one software. now, whats left to do is add these two printers in the utility.
    When i select from the add printer dialogue, "EPSON USB" it find the R200 driver, then i try to select "add" and it gives me this error: "An error occurred while trying to add the selected printers successful-ok-conflicting-attributes"
    when attempting to add the HP all in one to the utility, it won't even find the HP driver. Before i re-installed the HP all-in-one software, it had found it but gave me the exact same error as above. also in the add new printer dialogue the menu item that should say "USB" is just blank, and when i select what should say "usb" anyway, it.
    i deleted two files in the Library/Preferences/ folder that started with com.apple.print they appeared to be default configuration files. after rebooting the utility, the same problem persists.
    any other suggestions? now i can't print at ALL.
    G3 minitower 370 MHz Mac OS X (10.3.9)

  • Can Not Add a Printer/Printer Setup Utility Not Working

    Hi!
         When I go to my System Preferences, Printing, Set Up Printers..., nothing happens.  I thought this was how you added a printer, but no dialog box is opening.  Any ideas about what I am doing wrong or how to fix this problem?
         Thanks.

    Hi Everyone,
    Thanks for all the feedback on my printer problem.
    Here's what I know: Yes, the printer is plugged into the electrical outlet and the computer itself. The printer is an EPSON Stylus Photo R280 and EPSON claims it will operate on a Mac running 10.3.9 (which is what I have). Installation was going according to their instructions, including installing the drivers, and when I got to the part where it said to connect the USB cable, I did and apparently the computer recognized it as the installation then continued to the next step. The next step was a screen that said "Open the Printer List" and that's where I ran into trouble, as no printer list opened, no matter how many times I clicked on the button.
    Taking Ali B's advice, I checked HD>Applicaitons>Utilities to find my Printer Setup Utility, and lo and behold, it's not there! I have no idea what happened to it, but I'm guessing this may be the cause of my problem(?). So how do I get it back? Reinstall all my original OS software?
    Thanks again for all the help.

  • Printer setup utility not utilities folder OSX 10.7.5

    Printer setup utility not in utilities folder.  OSX  10.7.5  upgraded from 10.5.2. I do not have a 10.7.5 upgrade disc. How do I find or reinstall print setup Utility?   Can I recover printer set utility using Time Machine? Thank you.

    The Printer Setup Utility is part of the Print and Scan preference pane in System Preferences. When you open Print and Scan and select to add a printer by clicking the plus button, this opens the printer setup utility - although you don't see it named as such. The display just simply shows an Add Printer window with connection options of Default, Fax, IP and Windows.
    I would guess that you are referring to some old documentation that is telling you to open Printer Setup Utility to add the printer. So this document just needs to be updated for newer versions of OS X.

  • Printer setup utility not recognizing printer

    I have a G5 powermac with os 10.3.9. I have a HP 5000n printer with an ethernet connection over a LAN. The printer was working fine however It stopped working today. I tried reinstalling the HP drivers but the printer does not come up in the printer setup utility list. So I deleted all old references and tried again but still not showing. As I remenber this original setup was really easy but I can't get it to work now? Any help greatly appreciated

    Printer troubleshooting checklist:
    1. Check that the printer operates by doing a self-test print using the buttons on the printer itself.
    2. Check that the cable is fine. Perhaps swap the cable if another is available.
    3. Repair Permissions using Disk Utility, found in Application/Utilities.
    4. With Printer Setup Utility closed
    Locate the com.apple.print.PrintCenter.plist
    found in ~/Library/Preferences and trash it.
    5. Switch off, disconnect and unplug the cable of the printer.
    Locate the com.apple.print.HP5000n.plist or similar name
    found in ~/Library/Preferences and trash it.
    Reconnect the printer, switch on.
    Open Printer Setup Utility, select add printer.

  • Printer setup utility not allowing re-adding printer to list

    I've bought a Brother MFC (Model 210 C), and haven't been able to finish the installation because my operating system's Printer Setup Utility is not showing the new printer...in fact no dialog box shows up at all when I tell it I want to "add" a printer. I'm using a USB cable. A further discovery: when I try reconnecting my old printer, it shows that one listed, but if I then hit "delete" and ask it to find it again, it doesn't show anything or go anywhere. Is the problem possibly that I had the USB cable connected too early in the Brother installation? (I did, unfortunately). What do I do to get the multi-function center recognized?

    Cornelius,
    I've tried all that, reinstalled and re setup. Plus I ran a patch from Brother for this problem: when the Printer dialog doesn't run. I even went to the manufacturer, and the Brother tech said it had to be my operating system.
    Uh-oh. I just went back on a whim and discovered the patch was for OS 10.4! That can't be good… I'm on 10.3.9. That probably explains the problem. I didn't mention the patch to the Brother tech, as I recall.
    Guess I should go back to Brother. Thanks very much for your help!!

  • My print setup will not work and Fire fox only prints blank pages. Help?

    I tried to change the margins on my printer set up. Since I did this my printer will only print blank pages from Firefox. (If I open a PDF it prints fine) I have tried to go into print set up but it only comes up as a big black page. Any thoughts??

    Sorry, just to be clear:
    (1) Which did you use to make the change and which do not display correctly:
    orange Firefox button > Print > Page Setup<br>
    ''or''<br>
    classic File menu > Page Setup, or
    the Properties button in the Print dialog?
    (2) If you switch to a different printer, such as a PDF printer driver (many free ones you can install, such as [http://www.primopdf.com/ PrimoPDF] and [http://www.cutepdf.com/products/cutepdf/writer.asp CutePDF Writer]), can you regain access to Firefox's Page Setup dialog?

  • Printer Setup Utility Add Button NOT working

    Whenever I press the ADD button in the printer setup utility, nothing happens. The butten darkens as I press it but, no dialog box appears to add a new printer. The system console shows the following:
    2006-06-20 15:32:47.850 Printer Setup Utility[531] * -[FireWireBrowser startBrowsing]: selector not recognized [self = 0x594b0d0]
    Any ideas?
    Thanks in advance.

    Try downloading Pacifist http://www.macupdate.com/info.php/id/6812 and put in your Tiger Install DVD. Then click "Open Apple Install Packages" (which will only work if you put in the install DVD). Then search the folders for Printer Setup Utility and click Install. I believe it is in one of the top folders. You may have to go a little deep, but it isn't too hard to find. Good luck!
    PowerBook G4   Mac OS X (10.4.7)   Latest version (Double-Layer)

  • Printer Setup Utility - Add Printer not working

    I am visiting my grandparents over the holidays and brought my computer along but no printers. G-pa tells me I can use his HP Photosmart 325 (which has never been used). However, I must download the driver/software online b/c he can't find the CD. So, I go to HP and download all the necessary files. Once all is installed, I connect the printer and go to the printer setup utility to add the printer, like I have done a million times before. There in the printer list I choose the ADD icon and it brings me to the printer browser menu. There it is listed, Photosmart 320 Series connection type USB, yeah I think.... BUT NO, I click on the printer and the ADD button is dimmed, and will not allow me to click it. Soooo I see on the bottom there is Name, Location, and Print Using section. I try Print Using, and select HP, but once selected there is NO HP model that remotely matches my printer!
    What in the world is going on?

    This is the exact same thing that is happening to me. I have an older Canon card printer (CP-200), and a recent Epson inkjet (Stylus Photo R280), both of which I cannot set up properly. In both cases, I get to the Add screen, and the default browser finds my printer, but I can only add after I choose a driver. Even after repeatedly installing/uninstalling the drivers from Canon and Epson, I cannot find my printer models in the drop down list of printer drivers. There are some Gimp-print drivers there, but not for my exact model, and since I have installed the vendor's own driver already, why can't I use it? This is so frustrating! Please help!

  • Printer Setup Utility will not allow new driver to be added

    I just bought a Canon Pixma MP960, installed the drivers and then downloaded the driver from their website. When I go to add a new driver in Printer Setup Utility--i highlight the MP960 connected thru USB, but the 'add' feature is not lit up. When i have it search for new drivers, it detects a new driver, but when I hit 'add'--Printer Setup Utility "unexpectedly quits" every time. The only drivers in there are beta thingies that do not work w/ my printer.
    The Canon tech guy says that there is a problem with my Printer Setup Utility--but i can't seem to find a solution online. I don't know much about macs, but can I update the Printer Utility program or something? help!

    Part of the problem might be if you actually have more than one version of the driver for the printer installed on the computer. Check the drivers at Mac OS X disk/Library/Printers/Canon/ and make sure there is only one plugin for the printer. If you have more than one, trash both and download and install only the driver from Canon that is compatible for Mac OS X 10.4.x. After you install the driver, run Repair Disk Permissions using Disk Utility. If you have only one correct printer driver plugin installed, it should work.

  • HP 1610 All-in-one drivers not seen by Printer Setup Utility

    Just got this new for christmas. I downloaded the latest software and installed it. It was "successful". Everything with the software and the printer seems to be OK. When I go to add the printer to Printer Setup Utility I see the printer icon with a ? overlayed on the list followed by the printer name, followed by "no drivers installed". The "add" button is grayed out so that the printer can't be added. I can scan with the software I installed, and everything else seems to work except printing. Looks like to me that the problem lies with the PSU. I spent about an hour and a half on the phone with a very helpful HP Tech., but no-go. I repaired permissions, but that didn't help. The unit is seen by the System Profiler. PSU is v.3.0. I am using "Panther" 10.3.5. Sure would like some suggestions... Thanks!

     I  did as you suggested but it did not fix the problem. The software seems to be working but the HP device 4620 printer etc will still not connect to the router/network. I am still getting the message wrong password when the correct password is used
    Cheetah12 wrote:
    Thank you for this information.  Let's try some more steps:
    I would like you to restore the defaults on your printer:
    1) Press the Wrench on your printer
    2) Press the Tools menu
    3) Press Restore Defaults and click yes
    Once this is complete, I would like you to remove the Officejet 4620 software (If there is any on this computer). Please follow this HP document on Uninstalling the Printer Software. Remove the USB cable out of the computer, if it's already connected. Next, let's clean out your Temp folder on your computer:
    1) On the keyboard, hit the Windows key and "R" key together, then type %temp% and click enter.
    2) Press Ctrl and A together (This will highlight everything)
    3) Right click with your mouse and select delete
    Now, perform a clean boot on your computer by following this Microsoft document here. This helps eliminate software conflicts that occur when you install a program or an update or when you run a program. Try installing the software from the HP website here. Choose your correct operating system; Either 32 or 64 bit. Do not connect the USB cord into the computer until prompted.
    Please post your results again!

  • Lexmark x4650 Not Added to Printer Setup Utility

    I'm trying to set up a Lexmark x4650 as a shared printer on a wireless network. I got one computer set up and it works perfectly. I've tried setting up the second computer, a MBP, and after getting through the whole setup process it says that the printer was not added to the printer setup utility and to launch it and add it manually.
    I'm sick of trying to set it up manually. Does anyone know why the setup app might not be working?

    Wish I could help. The same model Lexmark is acting strange with me too. I have it wirelessly installed no problem on a windows PC and my wife's MacBook Pro but my plain ol' MacBook 13'' can't find the printer. I have to either plug it in USB or use it shared from the Pro.
    Furthermore I have trouble reading the instillation cd. It makes horrible lawn mower pull cord like noises in the drive and only works after ejecting many times. Every other cd seems fine though and neither of the other two computers had trouble with it.
    Like you no dice manually either.

  • AE found in admin utility but printer not in printer setup utility

    Have Linksys wrt54g with AE connected via ethernet cable (only way I've found to connect to the existing network). AE light is solid green and it is in the admin utility. I see the printer listed in the summary page in the admin utility. At this point I would think that I could find my printer listed in the printer setup utility. It was not there under bonjour or any other place. I down loaded a new driver. The printer is an HP photosmart 7760. I must be missing a step... oh and by the way I did not select connect to my existing network, that did not work. I guess my question is this. Is there some "trick" or step that I need to do so my printer shows up?
    Thank you, msw3636

    If the HP 2.7 driver is not available then...
    Use the process outlined here:
    HP Printers (and others) not on compatibility list and Airport Extreme Printing
    http://tech.ifelix.net/1300.html
    Using the HPIJS drivers.
    iFelix

  • AE in admin utility but printer not in printer setup utility

    Have Linksys wrt54g with AE connected via ethernet cable (only way I've found to connect to the existing network). AE light is solid green and it is in the admin utility. I see the printer listed in the summary page in the admin utility. At this point I would think that I could find my printer listed in the printer setup utility. It was not there under bonjour or any other place. I down loaded a new driver. The printer is an HP photosmart 7760. I must be missing a step... oh and by the way I did not select connect to my existing network, that did not work. I guess my question is this. Is there some "trick" or step that I need to do so my printer shows up?
    Thank you, msw3636

    go to applications/utility/airport setup utility and configure your express. If the program finds your Linksys then your good to go. Bonjour will take care of the rest.

  • Printer driver for lexmark x6570 does not appear in printer setup utility

    Hi
    I have just bought a lexmark x6570 wireless printer and have installed the driver on my powerbook, set up the printer (using a usb lead as instructed) but am unable to print anything as the printer driver does not appear in the printer setup utility. I have even tried to move the folder that was created on the desktop to the printer folder in the library folder but still no joy.
    Someone help me please!

    @YDNA1958 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

Maybe you are looking for