10.4.7 update breaks AirPort

After installing the 10.4.7 update, AirPort refuses to connect after restarting the computer. Network control panel says that "AirPort is connected and has a self-assigned IP." Going through the "Network Diagnostics" assistant (simply clicking through it) and reconnecting to my wireless network restores my network connection, but after restarting the computer, the problem comes back.
No settings on the wireless router were changed. This seems to be solely a result of the 10.4.7 update.
How can I solve this issue once and for all?

No problem with AirPort connections on my MBP following installation of 10.4.7.
Have you run Disk Utility and the permissions repair and disk verify routines? If a disk error shows up under disk verify, do a Safe boot (restart holding down the Shift key). The startup will take longer than a usual reboot, as the Mac is running self-diagnosis and repair routines similar to running disk verify from your Installation Disc 1. When you see the usual screens, restart normally. To be on the safe side, launch Disk Utility once more and run the disk verify routine, to check that the error has been corrected.

Similar Messages

What are the things 10.6.8 update break?

After the 10.6.8 update I am having so many issues,
first, the %100 cpu usage of dock, disabled parallels, and now it is ok,
then, a reboot and I am unable to login, I enter my password, it begins the login process, then logs me out,
if I persist, it logs me in after a couple of tries, but each time a few of my applications are missing at random, and the environment is very very unstable, sometimes I see no desktop background, sometimes I start firefox and I am logged out again.
I've seen some people suggesting removal of login items to resolve a similar but not the same issue, so I'm inclined to think overall, there is an issue with some applications which 10.6.8 update breaks.
For starters my login items are:
GrowlHelper
Geektool
EyeTv Helper
Canon IJ Network scanner
ituneshelper
Magicprefs
Sophosuiserver
Does anyone have any problems with any of these?
I only verified the parallels desktop 6 issue up to now.
Model Name: MacBook Pro
Model Identifier: MacBookPro6,2
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0C
SMC Version (system): 1.58f15

Actually it is not-so-permitted to remove sophos for this machine, but I did it anyhow. No problem so far, but lack of evidence is not evidence of being lack of something so I am not adding it to the list yet

Since latest update to airport extreme im getting 10 unknown base station and time capsule items showing in airport utility as a network. when able to "forget" them they initially drop off but soon return. how do i get them deleted and stay that way

since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my connection inside my home . any ideas. i have done a factory reset and set up a new network but they continue to show up.

I'm not convinced that the problem lies in Airport Utility. This same thing was happening to me, nearly exactly as you describe it. The thing is that with me, the problems clearly started when I updated the firmware in my Airport Express (n). That's when all the wacky stuff started happening. Sometimes it would show up in AU, sometimes it didn't and even if it didn't, I could still access the internet through it.
But as you said, the problems got really bad when another Express (b/g) was put on the network with it. Even when it did work, the (b/g) would make it impossibly slow.
You know more about this than me, and clearly have more patience if you've restarted the network fifty times. I gave up at about ten.
In any case, your solution is more of a work around and if you're still having that slow connection problem, I'm not sure you've got it. But thanks for your reporting of this. At least I know I'm not crazy.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

Please take a look at this Apple support document to see if it help solve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
Using iPhone

After the Airport update today, Airport Utility no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green?

After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Airport Utility prompted me to do so a few hours ago. After applying the updates is when Airport Utility stopped seeing my routers. But they are working? Thoughts?

Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

Why can I no longer use AirPlay with my Slingbox? New updates break complatibility?

You already seem to know what the issue is, it is the parallax feature that was added to iOS 7. From your rant, it appears that your attempt to work around this was not successful. According to the Apple documents I've seen, they recommend that you enlarge your image (not reduce it). Make your image have excess space on all sides, which is not displayed on the screen. This way, when you tilt your device one direction or another, it can shift the image to give the appearance of 3D.
As a photographer, I like to use the full frame of my images, but I also know that I need to leave room around the image as well. I have some photos I have taken that I can't use because I have them cropped too tightly too, but I have others that work just fine. Just remember that part of the image file is "off screen" so that if iOS has to shift the image up it has some image that can scroll onto the screen. It needs this space on all sdes, so just make youre images larger, and keep in mind that a portion on each side will be outside the normally visible screen... If you don't like this feature, you can always go into the settigns and turn it off.

Mac OSX 10.4.8 Update Breaks Raid Striping -- System will no longer boot

Hi,
I'm a newbie from the PC world with a Mac Pro. For the last 8 hours I've been trying to get a Raid-0 configuration to work with no success.
The Raid array constructs ok and the system boots. Once that's done the Software Update screen arrives and I would select install all... then the machine would not boot. I get a Grey Shade like affect and the message to power off and restart. Powering off does nothing.
So I started again for the Nth time and added each Software Update individually. All loaded and rebooted successfully until the 10.4.8 Update.
As soon as that loads, installs and restarts the machine will not boot.
I called Apple's Tech Support and they told me they do NOT support RAID on this machine. I said what are you talking about. They put me on hold talked to a supervisor and came back with the same story. I just don't get it...
So anyone have any insight and advice on why the update breaks my Raid-0? What can I do to get over the problem (I'd like to have the RAID...)?
Thanks for the assistance.
Mac Pro Mac OS X (10.4.8)

Yes, you needed an emergency boot drive anyway to repair your RAID boot drive. Just use the same one in addition to a working clone or backup of your regular system.
Apple made it easy to install or update security updates and system updates from an alternate drive (but you will have to use the stand-alone (combo preferably) updaters instead - which many use already as normal part of upgrades for years now (they seem more useful and reliable).
My preference is a dedicated boot drive with OS and apps and minimal home directory - no media files - and fast, like 10K Raptor. I use RAID for my home directory so it isn't on the boot drive for years to improve performance and keep the OS separate. Never a problem and nice mix.

After an update my airport is not working. It won't turn on. Do I need to redownload a driver, and how?

After an update my airport is not working. It won't turn on no matter how many times I press the turn on Wi Fi button. Do I need to redownload a driver, and how?

Hello
Try this
plug a WIERED mouse , start up your imac , hold on mouse buttons for 30-40 second at least by chance cd could be ejected
HTH
Pierre

I am updating my airport express. However, the message comes up with Invalid value - advertising a service globally using Bonjour requires a global hostname. WHat does this mean?

i am updating my airport express. However, the message comes up with Invalid value - advertising a service globally using Bonjour requires a global hostname. WHat does this mean?

thank you thank you for taking an interest. this is so frustrating.
i only have apple keyboard, mighty mouse, and 20 inch cinema display connected. this morning took out memory and tried to boot up with individual pairs in the first bank. first the (2)256, the (2) 1g, and then the other (2) 1g modules. everytime I get the weird fuzzy wheel under the logo after a while, black screen flashes, then grey apple logo fuzzy screen then black forever.
I ran tiger updates this morn. still will only boot to safe mode. then tried to run leopard disk to install it
will not boot from leopard disk.
tried safe boot, then doulble click install leopard, restart, then the saga repeats with the pixely red square around the wheel.
these are fresh drives with only what came on instll disk loaded.
thanks again for taking an interest.
i love this system(well at least i did). I want to install leopard on my powerbook too but am terrified to do so right now since it is working and I have work to do. Can't afford to have no computer to do my work on...self employment is great?!
This is making me crazy. I anxiously await your words of wisdom.

After a firmware update to airport express should I unplug the unit then plug it back in? (bascially reboot it)

After a firmware update to airport express should I unplug the unit wait a bit and plug it back in? (basically a reboot)

I updated the firmware on the 2nd of this month. Everything was fine. About a week later internet speed began to be slow. I rebooted the modem and the speed was okay for awhile, then slow again. I'm wondering if it's the airport express. It didn't tell me to reboot at the end of the installation.

The latest Java update breaks some vital applications

The latest Java update breaks some vital applications. I have reverted back to 7u45. But now, every time a java applet is used, the "later", "block", "update" window appears and stops the applet from loading. I must have this older release. Oracle does not throughly test their updates. Note: the apps the update breaks are actually Oracle apps.
I have checked the "do not ask again until next relesse" box every single time. Worthless.
Is there a way to stop Java version checks? I even have the box deselected for check for updates; ignored by OS X. I WANT CONTROL! Stop checking!
Ideas?

We are facing the same issue. We suggested all out customers not to install the updates Java 7u65 or 8u11 until there is a workaround or fix.
The wrong look & feel is causing the following problems:
- Either icons or text can be display on a button. Currently the majority of buttons are displaying an icon. Therefore the workaround is to set the text at least.
- Scroll-bars are displayed within all cells of a table column. The circumstances are not clear when these scroll-bars are displayed.

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?

Did OS X Mavericks v10.9.4 update break bluetooth audio for anyone else?
I have a 2.4GHz Intel Core 2 duo MacMini from 2010, and I just updated to the latest OSX (10.9.4 (13E28)) and now bluetooth audio is broken.
I can pair my device (LG Tone+) to the mac, but no audio will play though it. I've rebooted the machine, reconnected the device after the update, restarted the browser, all with no results.
Typically, when I connect to the system I will get audio acknowledgements through the headset, "Power On" "Battery High" "Connected"
I still get those audio queues through the device. However when I open up a video on YouTube, or attempt to stream music on Spotify...nothing happens.
I've plugged wired headphones into the system and that works just fine. When I connect my Bluetooth headset, the audio to the wired headphones disconnects, so it seems like everything is behaving normally, except that no audio plays through the bluetooth headset.
Any ideas on where to go from here would be greatly appreciated. So, what do we think?

Try resetting the SMC.
Barry

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport and TM, running Lion.

Time machine cannot find volume, error-1. Where can I fine solution for this error? Have latest updates for Airport Utility and TM, running Lion.

See #C17 in Time Machine - Troubleshooting.

Cannot install update for Airport?

When trying to install update for Airport I keep getting an error message that the installation did install because of an unexpected error. Tried several times to install with no success. All other updates install okay. Any ideas??

Maybe a firmware update you have missed. Reboot your airport, your Mac and redownload the update. Repair permissions the airport app may be corrupt.

10.4.7 update breaks AirPort

Similar Messages

Maybe you are looking for