10.4.8 AFP a reliable solution?

Hi,
I followed the discussions of the various AFP problems of Tiger Server while keeping my decision to use it for file service on hold.
Is someone using 10.4.8 and can confirm that the problems were solved by that update (as the release notes promise)?
I need a stable AFP solution and have soon to decide which version to use, Tiger or Panther.
Thanks in advance.

We upgraded last week from 10.4.6 to 10.4.8 and have noticed a MARKED improvement. Under 10.4.6 we had users getting the beach ball all day, every day. In fact, it's like having a new file server. It is now as fast as our 10.3.9 server.
Since we went right from .6 to .8 it could have been the .7 update that did it, but not sure.
John

Similar Messages

  • Getting redirected by urlseek90 search, how do I get rid of it ? After googling the issue I tried to remove manually and with the number of scans, but no luck so far. Will appreciate reliable solution!

    Did full Firefox reinstall with deleting user preferences, then disabled all plug-ins, scanned with Avast, Panda, Spybot, Malwarebytes, Winpatrol. No luck so far :(

    I appreciate the reply jorgvloet! Worked for me too!

  • Unable to Connect to WiFi after iPhone power off; WiFi & internet are working with MBP; common problem, no solutions?

    Here's my setup: Internet <> Comcast/xFinity supplied cable modem <> new Apple Time Capsule <> iPhone 4 & MacBook Pro (see below for hardware details)
    Internet on my iPhone 4 has been acting slow since yesterday evening. My MacBook Pro was running fine, but just to be sure I checked the Comcast website to see that I have only used 50GB of my allotted 250 GB of data for the month, so it's not that.
    I decided it must be a problem with just my iPhone, so I opened up the multitasking bar and quit everything in there manually, and then I held the on/off button, and slid the slider to power off. When I started back up, I could not connect to the same WiFi I had just been using. I tried to reconnect and nothing. I tried to forget the network and try again, nothing. I tried to reset all network settings, nothing.
    I have tried all the steps listed here: http://support.apple.com/kb/TS1398 "iOS: Troubleshooting Wi-Fi networks and connections"
    Toggled WiFi off and back on
    Made sure I am in range of the router (it's about 8 feet away and my iPhone reports full signal from the network)
    Made sure all the hardware is connected and on
    Checked other devices (I'm successfully connected with my MacBook Pro right now)
    Checked for router firmware upgrades (I have a new Time Capsule from Apple with the current 7.5.2 firmware which I've been using for a month)
    Restarted my device (again)
    Checked that the network is available (it does show on my iPhone)
    Restarted my Time Capsule
    Checked my router configuration as described here: http://support.apple.com/kb/TS3727 "Wi-Fi: Unable to connect to an 802.11n Wi-Fi network" which involves simply checking to see that WMM is turned on, also stating that WMM cannot be enabled or disabled for Apple's AirPort products.
    Reset my network settings (again)
    I have searched and searched for fixes to this problem, and I have additionally tried:
    Enabling/disabling Airplane Mode
    Disabling any network password protection/encryption (no luck), re-enabling it (no luck)
    Changing the network password
    Checking for hardware addresses present in iOS Settings > General > About (they are present and not zero'ed out)
    Switching Bluetooth off (nothing) and back on (nothing)
    ....and probably a few other things I can't think of right now
    I have yet to try:
    The "Freezer Trick" which apparently involves chilling the iPhone to get a temporary fix?
    Restoring the iPhone (I would really rather not)
    A different WiFi network (other than my own Time Capsule home network or guest network, both of which give the same Unable to Connect error)
    So, after all of that, are there any more ideas? Is there a reliable solution to this issue? So far I've just seen a lot of "mess with the settings," "the freezer trick worked," and "blame it on the iOS 4 update."
    Here are my hardware details:
    iPhone 4; iOS 5; 32GB; AT&T; no cellular data plan (July 2011)
    TimeCapsule6,113; Firmware 7.5.2; 2TB (September 2011)
    MacBook Pro 3,1; Mac OS X (10.7.2); 2.4 GHz Intel Core 2 Duo; Hi-Res Display; 4GB RAM; 500GB HD (August 2007)
    ...and the Time Capsule config:
    http://cl.ly/BCUt

    Ugh. Apparently "messing with it" is still the answer. I decided to try the LinkSys router I was using before I bought the Time Capsule, and my iPhone connected with no problem.
    I went through the steps again, and after rebooting my Time Capsule this time, I can connect again. The troubling thing it that this started with a power-off of my iPhone. No changes or installations, just a reset. Am I going to have to reboot my Time Capsule (which has no power switch, just a cord I have to unplug) every time I reboot my iPhone?
    Jinkies.

  • Looking for a correct solution for fast external drives

    It is unfortunately after having bought already 8 LaCie external drives of 500 Gb to 1 Tb a few years ago (Firewire 400/800) for my MacPro that I heard from this forum that I should never use these drives for video backup because being unreliable. The poeple who said that were right. Out of the 8 drives, 6 are now dead (disc failures) and lost some precious files.
    So now I am looking for a more reliable solution : I read somewhere that I could have for external storage a PCIe SATA controller w/ RAID performance; a solid SATA case for 4-8 drives perhaps. But when looking at SATA controller on the web, I am not certain whether all these cards work on a MacPro (the first Intel 2006 model with Mac OS Tiger 10) or just with Windows. Can someone advise me on what would be the right SATA card to buy for that computer, where to find them and what case I could link it to to install several hard drives ?
    (By the way, my 4 hard drive racks inside the MacPro are all used already.

    I’m on my third G-Tech external drive and I love their quality. I simply grew out of one and gave it to my son. The new mini works great too although my MacPro doesn’t like it when I partition the drive. It tends to stutter a bit and can lock things up on the MacPro. Still, I plan on buying the G-Safe as soon as I can. They certainly offer RAID Enterprise units although I haven’t used them. G-Tech uses Hitachi drives as the company is owned or associated with Hitachi. Either way, they’re hard to beat.
    http://g-technology.com/products/g-speed-q.cfm
    Message was edited by: Digital Dude

  • Which solution is better for schedules task? Console application or windows service?

    I have a "MULTI-LEVEL" XML file that I will be getting on daily basis and I want to accomplish following tasks:
    1) I have to read and parse the "MULTI-LEVEL" XML data
    2) Then I have to set or create some kind of .net service (c#) that read the xml and parse the data once a day (daily)?
    3) Now I have SOAP service from other software where I want to feed this XML data to. The schedules service will compare the XML data with software data and update (or add) based on the comparision.
    For this task, I come to conclusion that there are 2 best ways to do this:
    1) Create a console application and use windows task scheduler to run it everyday
    2) Create a windows service that runs in the background
    Which is a better way (or reliable)  solution to do this task? Please advise

    There are several things to keep in mind when writing an app that is designed to run without a user logged in. One of the most common mistakes is requiring some sort of user input.  Since the task will run without user intervention you don't want
    any sort of calls to Console.ReadLine, MessageBox.Show, etc.  They will cause the task to freeze and eventually need to be terminated.  You also don't want to rely on any sort of desktop apps running since a user may or may not be logged on at the
    time.
    Also be aware that a task can be scheduled to run under any user context.  As such you either need to ensure it runs under an account with sufficient privileges or that your app needs no special privileges.  You mentioned you tried to run it from
    bin\debug but you most likely have your project under your Documents directory.  Only you would have permissions to that folder and therefore will run into issues if the task is run under a different context.  You also mentioned you put it in the
    C:\ but users don't have write privileges to that folder and therefore if you tried to write a file out it would fail. If you need to read/write files then you should pick a common location that all users have access to or at least the one that will run the
    scheduled task. Be aware that, by default, Task Scheduler will not run a task elevated. You need to check the option to run elevated when you configure the user to run the task under.
    One of the key things to ensure you do with a task is verify it is working properly as a normal app.  You should also ensure that you have good logging so that if it does fail you can trace down the failure more easily.  One common thing that people
    tend to do in console apps is put a try-catch around the main function and display a message if an unhandled exception occurs. This is going to cause problems in a task.  Simply log the exception and rethrow it so Task Scheduler will flag the run as a
    failure.
    If you still cannot figure out why your task is failing then please add some logging and then tell us what code is being run at the time and what the failure is.

  • Has anyone found a solution to the poor battery life in Mavericks?

    Hi all,
    I was wondering if anyone has found a reliable solution to the poor battery life after updating to Mavericks. I tried to have the Mac shutdown by letting it go all the way dead and then charge it back up but it still is lousy. To literally see the battery guage go down in such a short period of time is surprising as I didn't have this in my previous OS. My machine is a five month old Macbook Pro Retina. I want to say I started seeing this change after installing the last Mail update for Mavericks. I definitely didn't encounter it after the initial update to Mavericks.
    Thoughts, comments, ideas?
    Ed

    Read through the posts on the right side of the page under 'More Like This'. Several fixes have been mentioned amongst them. But as there was an issue in Mountain Lion that was rectified with an update then it may just be a case of waiting to see if Apple issue a solar update for Mavericks. Remember it has only been out two weeks so I would doubt that if there is an update coming for it that they would release it without thorough testing.
    Cheers
    Pete

  • Error code 0x803C010B when printing wirelessly: Has anyone found a solution yet?

    I read all of the Microsoft forums regarding this issue but no one seemed to find a reliable solution.  When there was a solution for one person, then it didn't work for someone else.
    I called MS tech support, and they told me that they have received many calls about this error.  The tech said that only MS could fix it and she charged me $100, with a 100% guarantee that it would be fixed.  She evaded each time I asked her what
    was the root cause of the error.
    MS tech noticed three corrupted files from a Windows update, then started searching for viruses and malware, of which she found several, even though I had Norton protection.  Then she tried to sell me a different anti-virus program, for more money,
    which I declined until they could tell me the root cause of the problem.
    Unfortunately I had an appointment so I left the tech working on my computer remotely.  When I returned the problem was still not fixed.  Printer still shows as offline or even turned off, when it is neither of these things, and I receive the above-referenced
    error code when I try to troubleshoot.
    I have a follow-up call with a MS tech today.  I will post updates to this.  It seems that they do not know how to fix it, either.

    I'm having the same issue but with HP Photosmart 7525 and HP LaserJet P1102W.  Both worked fine until earlier this week when I "shut down and updated" my computer.  I keep deleting the printers from my computer and reinstalling them;
    they work temporarily then tell me they are "offline" when, clearly, they are not.

  • Single best external storage solution for Mac Pro & MacBook Pro ...?

    Hello,
    I'm still waiting for the Mac Pro delivery I have around me something like four external hard drives from different vendors and different sizes and all containing important data ... it is really a mess, cables, lack of redundancy, etc.
    I wanted to replace all these once and for all by a single elegant long-lasting and reliable solution to combine with my new Mac Pro and MacBook Pro. The best I could find was OWC Mercury Elite-AL Pro Qx2 8.0TB containing four internal HDD in double RAID with multiple possible setups: RAID 0 and RAID 1, RAID 10 configurations:
    http://eshop.macsales.com/item/Other%20World%20Computing/MEQX2T8.0S/
    Looks like an excellent choice for the only one external storage solution! does anyone has experience with this model? are there better contenders?
    Many thanks in advance,
    Best regards,
    Giovanni

    Giovanni,
    I have the OWC Mercury Elite-AL Pro Qx2 (6 TB) external HD array in a Raid 5 configuration (as received from OWC). I have found it to be excellent when connected to my Mac Pro using a PCI SATA card and the SATA output on the Elite-AL Pro Qx2. The speed of the system under Raid 5 easily supports all but uncompressed high definition video, and the system came with Prosoft's Data Backup software which does an excellent job of backing up other external drives installed on my Mac Pro.
    I highly recommend the Qx2 and think you will find it is a good single source solution to providing you with reliable and safe storage for your data. With Raid 5 if one of the HD's in the Qx2 fails, you simply remove it and allow the system to rebuild the data when you insert a new HD. Thus unless two HD's fail simultaneously (high unlikely) you are protected against data loss. Note also that your Mac Pro does not have to be left on while the Qx2 is rebuilding.
    Tom

  • How do I connect a Maverick imac and a snow leopard mac pro file sharing

    I am trying to connect an imac running Maverick,  and an older mac pro 1,1 running snow leopard.  The mac pro does not have airport.  I have tried connecting using my wireless router:  mac pro ethernet conencted and wifi with imac, but I either cannot connect or it takes forever.  I need a more reliable solution.  I bought an airport card for the mac pro. I hurt my foot, and am laid up, and have to access the massive files on the mac pro and external drives with the imac.  They are about 75 feet apart.  The imac uses the wirteless router just fine, which is next to the mac pro.  Which is the better solution,  buying a long enough eitehrnet cable, and direct connect, or install the airport card and connect using airport?  One more concern, I noticed my neighbor has  a mac, and his mac keeps showing up on the network as a lockede but selectable mac.  I am concerned about my security.  Which is best, and what is the sequence to set it up?  I can see that a step by step process with proper sequence and settings is critical to get tis to work.  Thanks for any help. 

    How are you currently trying to connect? The easiest method for setting up across operating systems would be to connect using AFP, the standard protocol Macs use to share files over a network (though, SMB2 is now the default method in Mavericks). Are you attempting to simply transfer data from one machine to the other, or set up a local network between these machines? If it is the former, the easiest method may be to use an external HDD to copy data from one machine and then transfer it to the other.
    See below for AFP:
    Mac Basics: File Sharing - Support - Apple
    And a youtube video:
    Mac 10.6 OS X Tutorial - File Sharing -AFP FTP and SMBS - Video ...
    One more concern, I noticed my neighbor has  a mac, and his mac keeps showing up on the network as a lockede but selectable mac.
    This is normal. You would need to explicitly grant your neighbor access to your machine for him to access anything on the machine, just as you need to do the same with your own computer you are attempting to connect.

  • Adobe Creative Cloud Enterprise Deployment Issues using SCCM 2012 R2

    Hi,
    I have been trying to deploy Adobe Creative Cloud Enterprise to Windows 8.1 machines that are identical, using SCCM 2012 R2.
    The Adobe package seems fine, because it seems to deploy successfully to some machines. And SCCM 2012 R2 has been configured correctly, as I can deploy other software using it, and again, it deploys Adobe CC successfully to some of the machines.
    I have tried comparing the package that is downloaded on the test machine/client machine, with the original package on the distribution point, using Beyond Compare, and there are no differences.
    I have contacted Adobe Enterprise Support, and they asked me to send to them log files from Event Viewer, the msi installer, and other Adobe logs, from the machine that failed the deployment. However, after Adobe studying them, they told me that they could not identify any problems... Strange, because I could have sworn that I saw error 1603 pop up over 20 times on different machines indicating that the 'Set-up.dat' file had a problem with it.
    After all the testing on over 20 identical machines (same hardware/same software), using different configurations on SCCM 2012 R2 and the client machines, I still can't seem to have a reliable solution to deploying Adobe CC.
    The fact that it deploys successfully on one machine and fails on another, or sometimes deploy to two machines and fail on another (simultaneously), is something that I don't understand.
    Another thing is that, if I retry the deployment 10-15 times after it failed the first time, it might go through...
    Adobe Enterprise Support asked me if they could remote into a machine that failed the deployment to have a look at it and I agreed to that option, but it seems like my issue has been ignored because they never got back to me.
    Has anyone had this kind of problem or anything similar before?
    I need to be able to deploy this remotely to 100+ machines. So installing manually is not an option.
    Any help is appreciated.
    This was posted in the wrong section a few days ago. I'm hoping I can get some help here.
    Case Number: 1862659812
    UPDATE: I spoke to Adobe Customer Support and after 1.5 hours on the phone with a remote session going on, problem was still not solved or identified. Additional log files have been sent and now I'm waiting for a call back.

    Hi Robert,
    We seem to be having a very similar issue.  Our installs would randomly fail with error code 1603 and an error message about a fault in Set-up.dat.  Failure rate was near 95% on our 900 machines.  Adobe Support and Karl having been looking into our issues but so far no solution has been found.
    Having done a lot of investigating we've managed to deploy our package using a schedule task running as a domain admin.  This is a nasty solution and we don't intend on using this permanently, but we needed to get the package out.
    Are you seeing any of the following:
    Entries in PDApp.log:
    [FATAL] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | The Bootstrapper Process is (5).Stopping the installation process.
    [FATAL] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | The return code from the Adobe Installer Process is (33).Stopping the uninstallation process.
    [WARN] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | Failed to find the pdb database.
    [WARN] |  | ASU | DeploymentManager | DeploymentManager |  |  | 2900 | Failed to get the local payload database handle.
    Event Log:
    Faulting application name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
    Faulting module name: Set-up.dat, version: 2.9.1.474, time stamp: 0x54e11f94
    Exception code: 0xc0000005
    Fault offset: 0x000d7c52
    Faulting process id: 0xb40
    Faulting application start time: 0x01d072a073861622
    Faulting application path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
    Faulting module path: \\server.name.path\Adobe CC\FullPackage\Build\ASU\Set-up.dat
    Report Id: c86d9216-de93-11e4-8284-782bcb99e284
    Faulting package full name:
    Faulting package-relative application ID:
    Installer Log
    Indicates it can't find the Media_db.  We noticed that the folder C:\Program Files (x86)\Common Files\Adobe\caps doesn't get created on the machines were the install fails, so error message is correct in that there isn't a Media_db.db.  Sysinterals Process Monitor seems to show that the setup tried to create the folder/files but they don't actually get created.  Copying a Media_db into the folder from another machine seems to allow the installation to almost finish, but unsurprisingly you end up with problems later on.

  • HP Officejet Pro L7580- here's a new one for HP Mac Architect

    So like all the other disgruntled HP users who foolishly installed 10.5 when it was released, I have been without a scanner ever since. Until three days ago, however, I've been able to print, as the driver for the L7580 was included in Leopard. Now, whenever I try to print a document, the print queue opens and the job says "stopped", which, incidentally, is the same thing that happens when I send a print job to my other once-was-a-printer-now-just-a-giant-waste-of-space, the Canon LBP5000. I've racked my brain trying to think if I've done something to trigger this, pestered the HP call in support center, installed, uninstalled and installed the printer again, restarted, replaced the USB cable- anything I can think of. Nothing works. I run a small business and while it's been a huge inconvenience to lose my not so inexpensive scanner, I've made due with an old one waiting for HP to get their act together and release software that actually works with 10.5. Needless to say, I cannot work without a printer. Am I going to have to go back to Tiger now? Spend untold thousands of dollars on a printer that probably won't work with leopard anyway? Can anyone advise? HP Mac Architect?

    Try this for a Quick Fix ...........
    After reading other forum comments from people having the same problem with the yellow cartridge popping-out, combined with others who have realised that HP have no interest in compensating anyone for this rediculous example of, at best, 'bad design', or at worst 'blatent planned obsolescence', I have created a 'quick fix' that may add another 1, 2 or more years of life to the HP Officejet Pro L7580 Printer.
    This is not the elegant technical solution I was hoping for.  However, in hindsight, it may prove to be a more reliable solution than replacing the faulty part that is actually causing the problem.  So, here it is the Quick Fix ........
    I found a wooden triangular door stop that I cut to size that fitted exactly in the space between the plastic door and the offending yellow cartridge. To hold it in place, I wrapped the doorstop with 2" cellotape, then I stuck the door stop to the inside of the plastic door with double sided cellotape (double sided stick-on foam would also work well). With the doorstop in the correct place, the plastic door closed perfectly and was snug enough to apply sufficent pressure to the offending yellow cartridge, and hence stopping it from popping out again.  To make sure the plastic door does not 'fly open' with the pressure of the yellow cartridge (when it wants to pop out!), I applied another piece of 2" cellotape around the outside of the door, holding it to the body of the photocopier.
    This exercise only took 10-15 mins to do.  I feel this is a much better option than spending another $300+ on a new All-in-One  system, as well as being a good environmental solution.  If this is DELIBERATE 'planned obsolescence', companies like HP need to be more accountable for, at best, 'sloppy design'.  Any feedback would be appreciated.

  • Application server will not start up

    Hello,
    I have read quite a few topics concerning this problem, and have tried many things but without success.
    I am running on Windows XP Pro. The installation goes fine, but when I run a project, the application server cannot start, and I get a message after quite a long time saying that it can't start and to check my port numbers,etc.
    I used to have Sun Java Creator, but I uninstalled it. I tried deleting the \Windows\System32\productregistry file. I tried uninstalling completely and reinstalling in C:\Sun\Creator2, but the problem is still the same. I tried deleting the domain with "asadmin" and recreating it, but I still get the problem.
    I am posting all the relevant information from the logs, hopin someone will be able to help me out....
    C:\Sun\Creator2ea2\install.log
    (Jan 14, 2006 3:34:36 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (coreFiles)
    (Jan 14, 2006 3:35:42 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (jdkFiles)
    (Jan 14, 2006 3:36:32 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Files (appserverFiles)
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Install Application Server Action (bean4)
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, # Wizard Statefile generatd by make_statefile.sh
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, # Wizard Statefile section for Sun Java System Application Server
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, #
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, [STATE_BEGIN Sun Java System Application Server 42cc62066aa69c151b1093bfcb735f8e112358e8]
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, defaultInstallDirectory = C:\Sun\Creator2ea2\SunAppServer8
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, currentInstallDirectory = C:\Sun\Creator2ea2\SunAppServer8
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, JDK_LOCATION = C:\Sun\Creator2ea2\java
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_USERNAME = admin
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_PASSWORD = adminadmin
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASADMIN_PORT = 24848
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_ASWEB_PORT = 28080
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, INST_HTTPS_PORT = 21043
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, STORE_ADMIN_AUTH = FALSE
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, ADMIN_PASSWORD_ENCRYPTED = FALSE
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, CREATE_SAMPLES_DOMAIN = FALSE
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, CREATE_DESKTOP_SHORTCUT = FALSE
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, [STATE_DONE Sun Java System Application Server 42cc62066aa69c151b1093bfcb735f8e112358e8]
    (Jan 14, 2006 3:36:45 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Installing Application Server...
    (Jan 14, 2006 3:37:58 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1,
    Checking available disk space...
    Checking Java(TM) 2 Runtime Environment...
    Extracting installation files...
    Launching Java(TM) 2 Runtime Environment...
    Deleting temporary files...
    "exitcode = 73"
    (Jan 14, 2006 3:37:58 PM), Setup.product.install, com.sun.installer.InstallApplicationServerAction, msg1, Finished
    (Jan 14, 2006 3:37:58 PM), Setup.product.install, com.installshield.wizard.platform.win32.Win32ProductServiceImpl, msg1, installing Post Install Core Action (postInstallCoreAction)
    (Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpecTed output: "C:\Sun\Creator2ea2\bin\storagebuilder.bat"
    (Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, preparsing C:\Sun\Creator2ea2\rave2.0\core\rowset.jar
    (Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Temp\mdrstorage\storage
    (Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, ... done
    (Jan 14, 2006 3:40:32 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, preparsing C:\Sun\Creator2ea2\rave2.0\core\sqlx.jar
    <SNIP>
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\pe-init-tray.bat"
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\jdic_0_9.jar
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\LICENSE.jdic_0_9
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, C:\Sun\CREATO~1\\rave2.0\startup\lib\Windows-i386\tray.dll
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, 3 fichier(s) copi�(s).
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, 1 fichier(s) copi�(s).
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Avertissements de compilation :
    (Jan 14, 2006 3:41:53 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 31: L'attribut 'classname' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\pe-start.bat"
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, WARNING: The adminpassword option is insecure and should not be used since it can compromise your password.  Please use either the command prompt or the passwordfile option.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Domain creator created.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Starting Domain creator, please wait.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Log redirected to C:\Sun\Creator2ea2\SunAppServer8\domains\creator\logs\server.log.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Timeout waiting for domain creator to go to starting state.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Avertissements de compilation :
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 44: L'attribut 'debug-options' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 61: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 72: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 83: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 104: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 115: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 126: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 144: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, line 155: L'attribut 'port' est � l'ext�rieur de l'�l�ment.
    (Jan 14, 2006 3:45:08 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, CLI156 Could not start the domain creator.
    (Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, The following script has unexpected output: "C:\Sun\Creator2ea2\bin\deploy-ejbs.bat"
    (Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, WARNING: The password option is insecure and should not be used since it can compromise your password.  Please use either the command prompt or the passwordfile option.
    (Jan 14, 2006 3:45:41 PM), Setup.product.install, com.sun.installer.PostInstallWizardAction, msg1, Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
    etc.
    etc.
    Hope I haven't drowned you with this log....
    Thanks,
    Raphael

    Here's a bit more information : the output of the C:\Sun\Creator2ea2\SunAppServer8\domains\creator\logs\server.log file :
    [#|2006-01-14T15:42:08.188+0100|WARNING|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2006-01-14T15:42:08.198+0100|INFO|sun-appserver-pe8.1_02|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/Creator2ea2/java\bin\java
    -client
    -XX:PermSize=32m
    -XX:MaxPermSize=128m
    -XX:+CMSPermGenSweepingEnabled
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/Creator2ea2/SunAppServer8/lib/endorsed
    -Djava.security.policy=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/Creator2ea2/SunAppServer8/domains/creator/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/Creator2ea2/java/jre/lib/ext;C:/Sun/Creator2ea2/SunAppServer8/domains/creator/lib/ext
    -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=creator
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/Creator2ea2/SunAppServer8/domains/creator
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=creator
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/Creator2ea2/SunAppServer8/config
    -Djava.library.path=C:\Sun\Creator2ea2\java\jre\bin\client;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\java\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\lib;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\Sun\Creator2ea2\SunAppServer8\bin;C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;C:\Program Files\Borland\BDS\4.0\Bin;C:\PROGRA~1\Borland\CBUILD~3\Bin;C:\PROGRA~1\Borland\CBUILD~3\Projects\Bpl;C:\Oracle\OraHomeAPISOFT\bin;C:\Program Files\Oracle\jre\1.1.7\bin;C:\Program Files\Borland\Delphi7\Bin;C:\Program Files\Borland\Delphi7\Projects\Bpl\;C:\PROGRA~1\Borland\CBUILDER5\Projects\Bpl;C:\PROGRA~1\Borland\CBUILDER3\bin;C:\PROGRA~1\Borland\CBUILDER5\bin;C:\PROGRA~1\Borland\CBUILDER\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\WinSCP3\;C:\Program Files\Fichiers communs\GTK\2.0\bin;C:\Tools;C:\Program Files\vPoint_XP;C:\Program Files\Sybase\SQL Anywhere 9\win32;C:\Program Files\Sybase\Shared\win32;C:\Program Files\Sybase\SQL Anywhere 9\drivers;C:\Program Files\Sybase\Shared\Sybase Central 4.3\win32;C:\SuperWabaSDK\SuperWabaSDK\bin;C:\Java\Ant\bin\;c:\JbuilderX\jdk1.4\bin;C:\Java\SuperWabaSDK\qrfSQL\win32;C:\Java\SuperWabaSDK\WExtLib\jni\VC\Release;C:\Java\FirebirdSQL\jaybird.dll;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\SOTI\MobiControl;;C:\Documents and Settings\Microtec\Mes documents\Borland Studio Projects\Bpl;C:\PROGRA~1\FICHIE~1\ORACLE\BIN
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/Creator2ea2/java/lib/tools.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/appserv-rt.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\activation.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\admin-cli.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-admin.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-cmp.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-env.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-ext.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-jstl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\appserv-upgrade.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\commons-launcher.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\commons-logging.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\dom.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\driveradapter.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\j2ee-svc.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\j2ee.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jax-qname.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxr-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxr-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxrpc-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jaxrpc-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jdic_0_9.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jmxremote.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jmxremote_optional.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jsf-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\jsf-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\mail.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\PEtray.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\relaxngDatatype.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\rmissl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\saaj-api.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\saaj-impl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smbase.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smdb2.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\sminformix.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smoracle.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smresource.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smspy.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smsqlserver.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smsybase.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\smutil.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xalan.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xercesImpl.jar;C:/Sun/Creator2ea2/SunAppServer8/lib\xsdlib.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/Creator2ea2/SunAppServer8/imq/lib/jaxm-api.jar;C:/Sun/Creator2ea2/SunAppServer8/imq/lib/fscontext.jar;C:/Sun/Creator2ea2/SunAppServer8/lib/ant/lib/ant.jar;C:/Sun/Creator2ea2/SunAppServer8/pointbase/lib/pbclient.jar;C:/Sun/Creator2ea2/SunAppServer8/pointbase/lib/pbembedded.jar
    com.sun.rave.tray.RavePEMain
    start
    display
    native|#]
    *** EXITING ERROR:
    Can't create Java VM
    ***

  • A better way to determine the current state of the FLVPlayback component?

    Below is the AS3 code I have used to display images (MCs) over an instance of the FLVPlayback component.  These images (one for loading, one for the title) are to appear – or disappear – according to the current state of the FLVPlayback component. 
    It “works,” but when testing, I have noticed that it can be rather finicky.  The most common issue that arises is that many times the loadPoster movieclip will still be visible even though the video has entered the playing state.
    Also, I wanted a title placeholder image to appear whenever the user stops the video or if the video completes.  However, I had to add the conditional statement to the “stoppedStateEntered” case to make everything appear when expected.  When the video is first viewed (and has completed buffering), it seems that the FLVPlayback component enters the stopped state before entering the playing state.  Thus, the titlePoster would flash on the screen right before it and the loadPoster “should” disappear when the video begins playing.
    Even in my limited testing, these issues were very easily re-created.  I am definitely looking for a more reliable solution.  Is there a better (or more correct) way to go about all this?  If possible, I would like to stick with the FLVPlayback component, just for the simple fact of not having to code my own.
    Where am I going wrong?
    function updateMoviePoster(event:VideoEvent):void
                    switch (event.type)
                                    case "playingStateEntered":
                                                    loadPoster.visible = false;
                                                    titlePoster.visible = false;
                                    break;
                                    case "stoppedStateEntered":
                                                    if (loadPoster.visible == false)
                                                                    titlePoster.visible = true;
                                    break;
                                    case "complete":
                                                    titlePoster.visible = true;
                                    break;
    myFLVPlayback.addEventListener(VideoEvent.PLAYING_STATE_ENTERED, updateMoviePoster);
    myFLVPlayback.addEventListener(VideoEvent.STOPPED_STATE_ENTERED, updateMoviePoster);
    myFLVPlayback.addEventListener(VideoEvent.COMPLETE, updateMoviePoster);

    Any suggestions?  I would truly appreciate the help.

  • Problem with Application server 8

    hi guys ,
    i am using Application server p.e 8 and i'm not able to start the default server it gives the following error:
    Starting Domain domain1, please wait.
    Log redirected to C:\Sun\AppServer\domains\domain1\logs\server.log.
    Domain domain1 failed to startup. There is a conflict on port 8080. Please check
    the server log for more details.
    CLI156 Could not start the domain domain1.
    Press any key to continue . . .
    i use Oracle 9i and i have also stopped the apache server which comes with oracle.
    Application server log is as follows :
    [#|2006-05-17T23:34:59.562+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2006-05-17T23:34:59.562+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/AppServer/jdk\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
    -Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
    -Djava.library.path=C:\Sun\AppServer\jdk\jre\bin\client;C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;M:\oracle\ora90\bin;M:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Sun\AppServer\bin;C:\Program Files\Java\jdk1.5.0_06\bin;C:\Sun\AppServer\lib\j2ee.jar;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/AppServer/jdk/lib/tools.jar;C:/Sun/AppServer/lib/appserv-rt.jar;C:/Sun/AppServer/lib\activation.jar;C:/Sun/AppServer/lib\admin-cli.jar;C:/Sun/AppServer/lib\appserv-admin.jar;C:/Sun/AppServer/lib\appserv-cmp.jar;C:/Sun/AppServer/lib\appserv-ext.jar;C:/Sun/AppServer/lib\appserv-jstl.jar;C:/Sun/AppServer/lib\appserv-upgrade.jar;C:/Sun/AppServer/lib\commons-launcher.jar;C:/Sun/AppServer/lib\commons-logging.jar;C:/Sun/AppServer/lib\dom.jar;C:/Sun/AppServer/lib\j2ee-svc.jar;C:/Sun/AppServer/lib\j2ee.jar;C:/Sun/AppServer/lib\jax-qname.jar;C:/Sun/AppServer/lib\jaxr-api.jar;C:/Sun/AppServer/lib\jaxr-impl.jar;C:/Sun/AppServer/lib\jaxrpc-api.jar;C:/Sun/AppServer/lib\jaxrpc-impl.jar;C:/Sun/AppServer/lib\jmxremote.jar;C:/Sun/AppServer/lib\jmxremote_optional.jar;C:/Sun/AppServer/lib\jsf-api.jar;C:/Sun/AppServer/lib\jsf-impl.jar;C:/Sun/AppServer/lib\mail.jar;C:/Sun/AppServer/lib\relaxngDatatype.jar;C:/Sun/AppServer/lib\rmissl.jar;C:/Sun/AppServer/lib\saaj-api.jar;C:/Sun/AppServer/lib\saaj-impl.jar;C:/Sun/AppServer/lib\xalan.jar;C:/Sun/AppServer/lib\xercesImpl.jar;C:/Sun/AppServer/lib\xsdlib.jar;C:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/AppServer/imq/lib/jaxm-api.jar;C:/Sun/AppServer/imq/lib/fscontext.jar;C:/Sun/AppServer/lib/ant/lib/ant.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2006-05-17T23:35:05.468+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|A conflict occured on port 8080 . Server is shutting down.|#]
    [#|2006-05-17T23:35:10.734+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Sun\AppServer\imq\bin].|#]
    [#|2006-05-17T23:35:10.734+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5025: JMS service shutting down.|#]
    [#|2006-05-17T23:35:10.906+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5026: JMS service shutdown complete.|#]
    [#|2006-05-17T23:36:10.750+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2006-05-17T23:36:10.765+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/AppServer/jdk\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
    -Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
    -Djava.library.path=C:\Sun\AppServer\jdk\jre\bin\client;C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;M:\oracle\ora90\bin;M:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Sun\AppServer\bin;C:\Program Files\Java\jdk1.5.0_06\bin;C:\Sun\AppServer\lib\j2ee.jar;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/AppServer/jdk/lib/tools.jar;C:/Sun/AppServer/lib/appserv-rt.jar;C:/Sun/AppServer/lib\activation.jar;C:/Sun/AppServer/lib\admin-cli.jar;C:/Sun/AppServer/lib\appserv-admin.jar;C:/Sun/AppServer/lib\appserv-cmp.jar;C:/Sun/AppServer/lib\appserv-ext.jar;C:/Sun/AppServer/lib\appserv-jstl.jar;C:/Sun/AppServer/lib\appserv-upgrade.jar;C:/Sun/AppServer/lib\commons-launcher.jar;C:/Sun/AppServer/lib\commons-logging.jar;C:/Sun/AppServer/lib\dom.jar;C:/Sun/AppServer/lib\j2ee-svc.jar;C:/Sun/AppServer/lib\j2ee.jar;C:/Sun/AppServer/lib\jax-qname.jar;C:/Sun/AppServer/lib\jaxr-api.jar;C:/Sun/AppServer/lib\jaxr-impl.jar;C:/Sun/AppServer/lib\jaxrpc-api.jar;C:/Sun/AppServer/lib\jaxrpc-impl.jar;C:/Sun/AppServer/lib\jmxremote.jar;C:/Sun/AppServer/lib\jmxremote_optional.jar;C:/Sun/AppServer/lib\jsf-api.jar;C:/Sun/AppServer/lib\jsf-impl.jar;C:/Sun/AppServer/lib\mail.jar;C:/Sun/AppServer/lib\relaxngDatatype.jar;C:/Sun/AppServer/lib\rmissl.jar;C:/Sun/AppServer/lib\saaj-api.jar;C:/Sun/AppServer/lib\saaj-impl.jar;C:/Sun/AppServer/lib\xalan.jar;C:/Sun/AppServer/lib\xercesImpl.jar;C:/Sun/AppServer/lib\xsdlib.jar;C:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/AppServer/imq/lib/jaxm-api.jar;C:/Sun/AppServer/imq/lib/fscontext.jar;C:/Sun/AppServer/lib/ant/lib/ant.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2006-05-17T23:36:13.437+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|A conflict occured on port 8080 . Server is shutting down.|#]
    [#|2006-05-17T23:36:16.593+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Sun\AppServer\imq\bin].|#]
    [#|2006-05-17T23:36:16.593+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5025: JMS service shutting down.|#]
    [#|2006-05-17T23:36:16.812+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5026: JMS service shutdown complete.|#]
    [#|2006-05-17T23:37:44.671+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2006-05-17T23:37:44.687+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/AppServer/jdk\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
    -Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
    -Djava.library.path=C:\Sun\AppServer\jdk\jre\bin\client;C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;M:\oracle\ora90\bin;M:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Sun\AppServer\bin;C:\Program Files\Java\jdk1.5.0_06\bin;C:\Sun\AppServer\lib\j2ee.jar;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/AppServer/jdk/lib/tools.jar;C:/Sun/AppServer/lib/appserv-rt.jar;C:/Sun/AppServer/lib\activation.jar;C:/Sun/AppServer/lib\admin-cli.jar;C:/Sun/AppServer/lib\appserv-admin.jar;C:/Sun/AppServer/lib\appserv-cmp.jar;C:/Sun/AppServer/lib\appserv-ext.jar;C:/Sun/AppServer/lib\appserv-jstl.jar;C:/Sun/AppServer/lib\appserv-upgrade.jar;C:/Sun/AppServer/lib\commons-launcher.jar;C:/Sun/AppServer/lib\commons-logging.jar;C:/Sun/AppServer/lib\dom.jar;C:/Sun/AppServer/lib\j2ee-svc.jar;C:/Sun/AppServer/lib\j2ee.jar;C:/Sun/AppServer/lib\jax-qname.jar;C:/Sun/AppServer/lib\jaxr-api.jar;C:/Sun/AppServer/lib\jaxr-impl.jar;C:/Sun/AppServer/lib\jaxrpc-api.jar;C:/Sun/AppServer/lib\jaxrpc-impl.jar;C:/Sun/AppServer/lib\jmxremote.jar;C:/Sun/AppServer/lib\jmxremote_optional.jar;C:/Sun/AppServer/lib\jsf-api.jar;C:/Sun/AppServer/lib\jsf-impl.jar;C:/Sun/AppServer/lib\mail.jar;C:/Sun/AppServer/lib\relaxngDatatype.jar;C:/Sun/AppServer/lib\rmissl.jar;C:/Sun/AppServer/lib\saaj-api.jar;C:/Sun/AppServer/lib\saaj-impl.jar;C:/Sun/AppServer/lib\xalan.jar;C:/Sun/AppServer/lib\xercesImpl.jar;C:/Sun/AppServer/lib\xsdlib.jar;C:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/AppServer/imq/lib/jaxm-api.jar;C:/Sun/AppServer/imq/lib/fscontext.jar;C:/Sun/AppServer/lib/ant/lib/ant.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2006-05-17T23:37:47.437+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|A conflict occured on port 8080 . Server is shutting down.|#]
    [#|2006-05-17T23:37:50.640+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Sun\AppServer\imq\bin].|#]
    [#|2006-05-17T23:37:50.640+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5025: JMS service shutting down.|#]
    [#|2006-05-17T23:37:50.859+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5026: JMS service shutdown complete.|#]
    [#|2006-05-17T23:39:16.812+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2006-05-17T23:39:16.828+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/AppServer/jdk\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
    -Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
    -Djava.library.path=C:\Sun\AppServer\jdk\jre\bin\client;C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;M:\oracle\ora90\bin;M:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Sun\AppServer\bin;C:\Program Files\Java\jdk1.5.0_06\bin;C:\Sun\AppServer\lib\j2ee.jar;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/AppServer/jdk/lib/tools.jar;C:/Sun/AppServer/lib/appserv-rt.jar;C:/Sun/AppServer/lib\activation.jar;C:/Sun/AppServer/lib\admin-cli.jar;C:/Sun/AppServer/lib\appserv-admin.jar;C:/Sun/AppServer/lib\appserv-cmp.jar;C:/Sun/AppServer/lib\appserv-ext.jar;C:/Sun/AppServer/lib\appserv-jstl.jar;C:/Sun/AppServer/lib\appserv-upgrade.jar;C:/Sun/AppServer/lib\commons-launcher.jar;C:/Sun/AppServer/lib\commons-logging.jar;C:/Sun/AppServer/lib\dom.jar;C:/Sun/AppServer/lib\j2ee-svc.jar;C:/Sun/AppServer/lib\j2ee.jar;C:/Sun/AppServer/lib\jax-qname.jar;C:/Sun/AppServer/lib\jaxr-api.jar;C:/Sun/AppServer/lib\jaxr-impl.jar;C:/Sun/AppServer/lib\jaxrpc-api.jar;C:/Sun/AppServer/lib\jaxrpc-impl.jar;C:/Sun/AppServer/lib\jmxremote.jar;C:/Sun/AppServer/lib\jmxremote_optional.jar;C:/Sun/AppServer/lib\jsf-api.jar;C:/Sun/AppServer/lib\jsf-impl.jar;C:/Sun/AppServer/lib\mail.jar;C:/Sun/AppServer/lib\relaxngDatatype.jar;C:/Sun/AppServer/lib\rmissl.jar;C:/Sun/AppServer/lib\saaj-api.jar;C:/Sun/AppServer/lib\saaj-impl.jar;C:/Sun/AppServer/lib\xalan.jar;C:/Sun/AppServer/lib\xercesImpl.jar;C:/Sun/AppServer/lib\xsdlib.jar;C:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/AppServer/imq/lib/jaxm-api.jar;C:/Sun/AppServer/imq/lib/fscontext.jar;C:/Sun/AppServer/lib/ant/lib/ant.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2006-05-17T23:39:19.562+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|A conflict occured on port 8080 . Server is shutting down.|#]
    [#|2006-05-17T23:39:22.812+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Sun\AppServer\imq\bin].|#]
    [#|2006-05-17T23:39:22.812+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5025: JMS service shutting down.|#]
    [#|2006-05-17T23:39:23.031+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5026: JMS service shutdown complete.|#]
    [#|2006-05-17T23:40:44.750+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2006-05-17T23:40:44.750+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/AppServer/jdk\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
    -Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
    -Djava.library.path=C:\Sun\AppServer\jdk\jre\bin\client;C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;C:\Sun\AppServer\bin;M:\oracle\ora90\bin;M:\oracle\ora90\Apache\Perl\5.00503\bin\mswin32-x86;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Sun\AppServer\bin;C:\Program Files\Java\jdk1.5.0_06\bin;C:\Sun\AppServer\lib\j2ee.jar;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Sun/AppServer/jdk/lib/tools.jar;C:/Sun/AppServer/lib/appserv-rt.jar;C:/Sun/AppServer/lib\activation.jar;C:/Sun/AppServer/lib\admin-cli.jar;C:/Sun/AppServer/lib\appserv-admin.jar;C:/Sun/AppServer/lib\appserv-cmp.jar;C:/Sun/AppServer/lib\appserv-ext.jar;C:/Sun/AppServer/lib\appserv-jstl.jar;C:/Sun/AppServer/lib\appserv-upgrade.jar;C:/Sun/AppServer/lib\commons-launcher.jar;C:/Sun/AppServer/lib\commons-logging.jar;C:/Sun/AppServer/lib\dom.jar;C:/Sun/AppServer/lib\j2ee-svc.jar;C:/Sun/AppServer/lib\j2ee.jar;C:/Sun/AppServer/lib\jax-qname.jar;C:/Sun/AppServer/lib\jaxr-api.jar;C:/Sun/AppServer/lib\jaxr-impl.jar;C:/Sun/AppServer/lib\jaxrpc-api.jar;C:/Sun/AppServer/lib\jaxrpc-impl.jar;C:/Sun/AppServer/lib\jmxremote.jar;C:/Sun/AppServer/lib\jmxremote_optional.jar;C:/Sun/AppServer/lib\jsf-api.jar;C:/Sun/AppServer/lib\jsf-impl.jar;C:/Sun/AppServer/lib\mail.jar;C:/Sun/AppServer/lib\relaxngDatatype.jar;C:/Sun/AppServer/lib\rmissl.jar;C:/Sun/AppServer/lib\saaj-api.jar;C:/Sun/AppServer/lib\saaj-impl.jar;C:/Sun/AppServer/lib\xalan.jar;C:/Sun/AppServer/lib\xercesImpl.jar;C:/Sun/AppServer/lib\xsdlib.jar;C:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar;C:/Sun/AppServer/imq/lib/jaxm-api.jar;C:/Sun/AppServer/imq/lib/fscontext.jar;C:/Sun/AppServer/lib/ant/lib/ant.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2006-05-17T23:40:47.328+0530|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|A conflict occured on port 8080 . Server is shutting down.|#]
    [#|2006-05-17T23:40:50.468+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Sun\AppServer\imq\bin].|#]
    [#|2006-05-17T23:40:50.468+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5025: JMS service shutting down.|#]
    [#|2006-05-17T23:40:50.671+0530|INFO|sun-appserver-pe8.2|javax.enterprise.resource.jms|_ThreadID=10;|JMS5026: JMS service shutdown complete.|#]
    [#|2006-05-17T23:41:41.187+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2006-05-17T23:41:41.187+0530|INFO|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Sun/AppServer/jdk\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Sun/AppServer/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Sun/AppServer/lib/endorsed
    -Djava.security.policy=C:/Sun/AppServer/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Sun/AppServer/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Sun/AppServer/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Sun/AppServer/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Sun/AppServer/jdk/jre/lib/ext;C:/Sun/AppServer/domains/domain1/lib/ext;C:/Sun/AppServer/derby/lib
    -Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Sun/AppServer/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Sun/AppServer/config
    -Djava.library.path=C:\Sun\AppServer\jdk\jre\bin\client;C:\Sun\AppServer\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\jdk\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Sun\AppServer\lib;C:\Sun\AppServer\bin;C:\Sun

    It seems that something is still running on port 8080 - you should double check that your Apache server is indeed shut down and maybe reboot the system.
    Alternatively, you could change the value of this (HTTP) port in <installdir>/domains/domain1/config/domain.xml file.

  • Problem with Application server

    Hi All,
    I'm facing problem with Application Server. When I installed the appserver and started it.. It started with the message " server has been started and some services will run at back". But when I tried stopping it using the stop default server i got the message that there is no server running but when i saw in the task manager i cud see two process running 1) appserver.exe and 2) imqbroker(something).exe so eventually I had to kill it.
    Now when I'm trying to start the application server again its giving me this message "CLI156 Could not start the domain domain1" and below is the log file attached if its of any help
    [#|2005-08-31T23:37:57.000+1000|WARNING|sun-appserver-pe8.1_01|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2005-08-31T23:37:57.015+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Program Files/Java/jdk1.5.0\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/endorsed
    -Djava.security.policy=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Program Files/Java/jdk1.5.0/jre/lib/ext;C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/lib/ext
    -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Program Files/netbeans-4.1/SunAppServer8.1/config
    -Djava.library.path=C:\Program Files\Java\jdk1.5.0\jre\bin\client;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\Java\jdk1.5.0\bin;.;C:\WINDOWS\System32;C:\WINDOWS;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.5.0\bin;.;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Sun\AppServer\bin;;C:\Program Files\Java\jdk1.5.0\bin;.;C:\Program Files\jre\jdk1.5.0\bin;.;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Program Files/Java/jdk1.5.0/lib/tools.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/appserv-rt.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\admin-cli.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-admin.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\dom.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jmxremote.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jmxremote_optional.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jsf-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jsf-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\rmissl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xalan.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xercesImpl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-upgrade.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-ext.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\j2ee.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\activation.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-cmp.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-jstl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\commons-launcher.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\commons-logging.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\j2ee-svc.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jax-qname.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxr-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxr-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\mail.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\relaxngDatatype.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\saaj-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\saaj-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xsdlib.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/install/applications/jmsra/imqjmsra.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/imq/lib/jaxm-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/imq/lib/fscontext.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/ant/lib/ant.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbclient.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbembedded.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2005-08-31T23:38:03.515+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5023: JMS service successfully started. Instance Name = imqbroker, Home = [C:\Program Files\netbeans-4.1\SunAppServer8.1\imq\bin].|#]
    [#|2005-08-31T23:38:03.515+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.core|_ThreadID=10;|CORE5098: AS Socket Service Initialization has been completed.|#]
    [#|2005-08-31T23:38:15.796+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
    [#|2005-08-31T23:38:16.484+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
    [#|2005-09-01T00:48:45.484+1000|WARNING|sun-appserver-pe8.1_01|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2005-09-01T00:48:45.531+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Program Files/Java/jdk1.5.0\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/endorsed
    -Djava.security.policy=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Program Files/Java/jdk1.5.0/jre/lib/ext;C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/lib/ext
    -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Program Files/netbeans-4.1/SunAppServer8.1/config
    -Djava.library.path=C:\Program Files\Java\jdk1.5.0\jre\bin\client;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\Java\jdk1.5.0\bin;.;C:\WINDOWS\System32;C:\WINDOWS;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.5.0\bin;.;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Sun\AppServer\bin;;C:\Program Files\Java\jdk1.5.0\bin;.;C:\Program Files\jre\jdk1.5.0\bin;.;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Program Files/Java/jdk1.5.0/lib/tools.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/appserv-rt.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\admin-cli.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-admin.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\dom.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jmxremote.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jmxremote_optional.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jsf-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jsf-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\rmissl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xalan.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xercesImpl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-upgrade.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-ext.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\j2ee.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\activation.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-cmp.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-jstl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\commons-launcher.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\commons-logging.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\j2ee-svc.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jax-qname.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxr-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxr-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\mail.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\relaxngDatatype.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\saaj-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\saaj-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xsdlib.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/install/applications/jmsra/imqjmsra.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/imq/lib/jaxm-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/imq/lib/fscontext.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/ant/lib/ant.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbclient.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbembedded.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2005-09-04T04:12:39.281+1000|WARNING|sun-appserver-pe8.1_01|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop.  Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components.  |#]
    [#|2005-09-04T04:12:39.343+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.tools.launcher|_ThreadID=10;|
    C:/Program Files/Java/jdk1.5.0\bin\java
    -client
    -Xmx512m
    -XX:NewRatio=2
    -Dcom.sun.aas.defaultLogFile=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/logs/server.log
    -Djava.endorsed.dirs=C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/endorsed
    -Djava.security.policy=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/server.policy
    -Djava.security.auth.login.config=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/login.conf
    -Dsun.rmi.dgc.server.gcInterval=3600000
    -Dsun.rmi.dgc.client.gcInterval=3600000
    -Djavax.net.ssl.keyStore=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/keystore.jks
    -Djavax.net.ssl.trustStore=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/config/cacerts.jks
    -Djava.ext.dirs=C:/Program Files/Java/jdk1.5.0/jre/lib/ext;C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1/lib/ext
    -Djdbc.drivers=com.pointbase.jdbc.jdbcUniversalDriver
    -Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
    -Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
    -Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
    -Dcom.sun.enterprise.taglisteners=jsf-impl.jar
    -Djavax.xml.parsers.SAXParserFactory=com.sun.org.apache.xerces.internal.jaxp.SAXParserFactoryImpl
    -Dcom.sun.aas.configName=server-config
    -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
    -Ddomain.name=domain1
    -Djmx.invoke.getters=true
    -Djavax.xml.parsers.DocumentBuilderFactory=com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderFactoryImpl
    -Dcom.sun.aas.promptForIdentity=true
    -Dorg.xml.sax.driver=com.sun.org.apache.xerces.internal.parsers.SAXParser
    -Dcom.sun.aas.instanceRoot=C:/Program Files/netbeans-4.1/SunAppServer8.1/domains/domain1
    -Djavax.xml.transform.TransformerFactory=com.sun.org.apache.xalan.internal.xsltc.trax.TransformerFactoryImpl
    -Dcom.sun.aas.domainName=domain1
    -Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
    -Dproduct.name=Sun-Java-System/Application-Server
    -Dcom.sun.enterprise.overrideablejavaxpackages=javax.faces,javax.servlet.jsp.jstl,javax.xml.bind,javax.help
    -Dcom.sun.aas.configRoot=C:/Program Files/netbeans-4.1/SunAppServer8.1/config
    -Djava.library.path=C:\Program Files\Java\jdk1.5.0\jre\bin\client;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\Java\jdk1.5.0\bin;.;C:\WINDOWS\System32;C:\WINDOWS;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\lib;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\Program Files\netbeans-4.1\SunAppServer8.1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.5.0\bin;.;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Sun\AppServer\bin;;C:\Program Files\Java\jdk1.5.0\bin;.;C:\Program Files\jre\jdk1.5.0\bin;.;
    -Dcom.sun.aas.instanceName=server
    -Dcom.sun.aas.processLauncher=SE
    -cp
    C:/Program Files/Java/jdk1.5.0/lib/tools.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/appserv-rt.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\admin-cli.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-admin.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\dom.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jmxremote.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jmxremote_optional.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jsf-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jsf-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\rmissl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xalan.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xercesImpl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-upgrade.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-ext.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\j2ee.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\activation.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-cmp.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\appserv-jstl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\commons-launcher.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\commons-logging.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\j2ee-svc.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jax-qname.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxr-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxr-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\jaxrpc-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\mail.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\relaxngDatatype.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\saaj-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\saaj-impl.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib\xsdlib.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/install/applications/jmsra/imqjmsra.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/imq/lib/jaxm-api.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/imq/lib/fscontext.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/lib/ant/lib/ant.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbclient.jar;C:/Program Files/netbeans-4.1/SunAppServer8.1/pointbase/lib/pbembedded.jar
    com.sun.enterprise.server.PEMain
    start
    display
    native|#]
    [#|2005-09-04T04:13:50.453+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5035: Timed out after 60000 milliseconds while trying to verify if the JMS service startup succeeded.|#]
    [#|2005-09-04T04:13:50.453+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5037: Check permissions of MQ instance directory C:\Program Files\netbeans-4.1\SunAppServer8.1\imq\var\instances|#]
    [#|2005-09-04T04:13:50.453+1000|INFO|sun-appserver-pe8.1_01|javax.enterprise.resource.jms|_ThreadID=10;|JMS5036: More details may be available in the log file for the JMS service broker instance imqbroker. Please refer to the JMS provider documentation for the exact location of this log file.|#]
    [#|2005-09-04T04:13:50.453+1000|SEVERE|sun-appserver-pe8.1_01|javax.enterprise.system.core|_ThreadID=10;|UnknownException during startup. Disable quick startup by setting system property com.sun.enterprise.server.ss.ASQuickStartup to false
    com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation [127.0.0.1:7676]. - cause: java.net.ConnectException: Connection refused: no further information
         at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:427)
         at com.sun.enterprise.server.ss.ASLazyKernel.startASSocketServices(ASLazyKernel.java:54)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:274)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
    Caused by: com.sun.messaging.jms.JMSException: [C4003]: Error occurred on connection creation [127.0.0.1:7676]. - cause: java.net.ConnectException: Connection refused: no further information
         at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSConnectException(ExceptionHandler.java:233)
         at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleConnectException(ExceptionHandler.java:180)
         at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:176)
         at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:101)
         at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:54)
         at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:61)
         at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:102)
         at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnectionOld(ConnectionInitiator.java:281)
         at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:107)
         at com.sun.messaging.jmq.jmsclient.ConnectionInitiator.createConnection(ConnectionInitiator.java:92)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:613)
         at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:1194)
         at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1894)
         at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:712)
         at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:293)
         at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
         at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
         at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
         at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:783)
         at com.sun.enterprise.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:335)
         at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:396)
         ... 3 more
    Caused by: java.net.ConnectException: Connection refused: no further information
         at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
         at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:525)
         at com.sun.enterprise.server.ss.ASClientSocketImpl.connect(ASClientSocketImpl.java:175)
         at java.net.Socket.connect(Socket.java:507)
         at java.net.Socket.connect(Socket.java:457)
         at java.net.Socket.<init>(Socket.java:365)
         at java.net.Socket.<init>(Socket.java:178)
         at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:156)
         ... 21 more
    |#]
    [#|2005-09-04T04:13:50.484+1000|SEVERE|sun-appserver-pe8.1_01|javax.enterprise.system.core|_ThreadID=10;|Exception while stoppping Lifecycle.
    com.sun.appserv.server.ServerLifecycleException: MQ startup failed :[C4003]: Error occurred on connection creation [127.0.0.1:7676]. - cause: java.net.ConnectException: Connection refused: no further information
         at com.sun.enterprise.jms.JmsProviderLifecycle.checkProviderStartup(JmsProviderLifecycle.java:376)
         at com.sun.enterprise.jms.JmsProviderLifecycle.onShutdown(JmsProviderLifecycle.java:445)
         at com.sun.enterprise.server.ss.ASLazyKernel.stopLifecycle(ASLazyKernel.java:175)
         at com.sun.enterprise.server.ss.ASLazyKernel.stopMQ(ASLazyKernel.java:169)
         at com.sun.enterprise.server.ss.ASLazyKernel.exitServer(ASLazyKernel.java:74)
         at com.sun.enterprise.server.ss.ASLazyKernel.startASSocketServices(ASLazyKernel.java:67)
         at com.sun.enterprise.server.PEMain.run(PEMain.java:274)
         at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
    |#]
    Thanks in advance
    Ajay

    The VERY FIRST message in the server log gives you a hint as to what the problem might be. The server thinks you have spaces in your PATH to the application server. Therefore, the solution is to kill the server however you need to (task manager, whatever) and then reinstall it in a path that doesn't contain spaces. That's the low-hanging fruit here; if that doesn't work, well, then we will have to find some other solution.

Maybe you are looking for

  • Any way to reduce the resolution when exporting to .pdf

    We are emailing reports.  On some reports with a large number of jpegs we are hitting a size limitation.  It would be helpful to reduce the resolution on the jpegs when exporting to .pdf.  Any way that would be possible?

  • Images do not display unless renamed.

    We are currently running Oracle Fusion Middleware 11GR2 with webcache enabled.  Our applications are using forms 11GR2.  We have an image jar file that contains the application icon images we use in our applications.  When we bring up the application

  • How can I minimise the file size of a greyscale image ?

    Hi, What methods are there for making as small as possible the file size of a greyscale image. I need to keep the resolution at 200pixels per inch. The image is going to be big, 5835mm wide and 1780mm tall ! Some of them have some fine soft detail so

  • ITunes store videos using way too much CPU

    I recently purchased some tv shows from the iTunes store (Daily Show and South Park). When I play these, iTunes CPU usage goes up to 90% or higher, and basically freezes my whole computer, including the video. CPU usage spikes especially high in 'act

  • Why my simple vector file is so big

    Hello, i have many simple vector files, created in CS6 that are over 15MB. i had deleted all swatches, brushes and symbols. I jusc cant figure out why those files are so big heres an example: and the .ai file weight is 17,1 MB link to the file: http: