10.4.8 - Major Issues with Airport card on Intel 17"

Hi -
I have installed the new terrorist update 10.4.8....To me it seem more like installing a virus than an update on an OS. My computer which was soooo fast (MacBook Pro 17") has now lost about 50% performance on all flanks... My Airport card is ERRATIC as HE** and I hate my self for updating.... I've already done repairing of any of the usual suspects
DONT UPDATE TO 10.4.8

for airport try this
http://docs.info.apple.com/article.html?artnum=304482
open shell anf type:
sudo update_prebinding -degug -root / -force
restart
check the performance.

Similar Messages

Major issues with Airport Extreme and Blu Ray Players

I've been working with this for several days now, and am at the end of my rope. Hopefully someone has some answers.
I've got the original 802.11n Airport Extreme. I've had it since it was released, and have had no real problems up until now.
At the beginning of May I got a new TV with a Samsung Blu Ray player. Model BD-C6500. The first one died halfway through our first movie, and I took it back. The second one worked fine for a few weeks, and then all of a sudden told me that it couldn't connect to the network.
This was about the time that we had a power outage, but all devices were hooked to surge protectors, so I'm guessing that it was just coincidence, but I thought I'd put that here just in case.
Well, the Blu Ray player was a real puzzle. I would try to connect, and it would connect, but not get an IP address. I'd do it again, and then it would but couldn't get past the router. I'd do it one more time, and it would work for a while, and we could watch Netflix. Then it would stop working again.
I finally took it back and exchanged it, thinking that it had some problems. The new one did the exact same thing! Brand new C6500 won't connect, or can't get IP, or can't get past the router, but sometimes works.
Frustrated, I went back and exchanged it for an LG, model BD570. It logged onto the wireless right away, downloaded the firmware update, and worked perfectly on Netflix and Pandora. Success! Until this morning. Now it's doing the same thing, where it can connect, but can't get past the router. No internet connection.
I've got two laptops, a PowerMac, two iPhones, and an TV running on this router with no problems. Settings are mostly standard, with security set for WPA/WPA 2 Personal, with a 13 digit password. I've tried both DHCP and Static IPs for the BD Player. I've used both the router address along with outside servers for the DNS. I've removed password security. I've tried WEP. I've changed the multicast rate. I've done a full reset of the router.
Any help would be appreciated. Wired access is not an option in this location, and I don't want to drop $100 on an Aiport Express if I can help it.
-Ehren

**My Airport Express access point firewall needed to be set to "HOST", then everything worked wonderfully.**
Before the "HOST" firewall change my symptoms were as follows:
The wireless setup process would work sometimes, other times not (not result in a successful connection). Also, when it did work, it would be lost when the c6500 shut off.

Major Issues with Premiere Pro CC

I am currently having some major issues with Premiere Pro CC running on my macbook pro(specs below).
I am trying to export a 4 minute video using the vimeo 1080p export settings as I usually do, and it takes about 10 hours to export the video. On cs6, a similar project would take 5-10 minutes.
Also, the video that was exported contained a lot of clips that came out choppy and low quality.
I am currently on the phone with tech support, and they cannot seem to figure out what is wrong.
I have seen a few post about CC having issues with amd cards, but nothing has been confirmed yet.
Any help would be greatly appreciated since this job is past due due to these issues.
2011 MacBook Pro
i7 2.2
16GB Ram
256 SSD + 750GB HD
AMD Radeon HD 6750M 1GB

You neglected to specify exactly which release of PPro CC you are running. There have been 5 of them.
If you're on CC7.2 or 7.2.1, then you may be hitting the same problem discussed in one of these threads:
RGB Curves: http://forums.adobe.com/message/5929088?tstart=0#5929088
http://forums.adobe.com/message/5934916?tstart=30#5934916
http://forums.adobe.com/message/5935386?tstart=0#5935386
The first thing to try is switching Renderer to Software Only.

10.6.2 - Major issue with 8800gt

Hi, I've got a Mac Pro Early 2008 with 8800gt.
I just updated to 10.6.2 and I have been experiencing major issues with nvidia 8800gt: my mac don't boot. When I push the power button, nothing appears on my monitor and I can hear the 8800gt fan @ maximum speed. It seems there's no disk activity, too.
I've tried to remove the video card and start the mac without it: now I can hear the Hard disk run, but obviously I can see nothing on my screen.
any suggestion?
thanks,
Luzio

I can't count how many, but a good 5-10% of the problems with updates are due to a lack of pre-update maintenance.
And you can't rule out what or why if you don't have 10.5.8 and/or 10.6.1 on another hard drive to see what is wrong. You can't navigate from a DVD.
And you can't boot from a DVD if the hard drive directory/catalogue is severely corrupt. Which your situation suggests is the case.
Unplug your hard drive.
Boot from the DVD
Install Mac OS to another drive.
Never go without working backups and emergency boot drives.
It is normal for 8800s fan to kick in for half a minute during startup to cool it down and expel any heat that may have built up. So it suggests the 8800 is working properly.
Backups PREVENT problems. As does Disk Warrior (best used with SuperDuper or Carbon Copy Cloner).
Of course if you have a 2nd 'spare' video card all the easier to troubleshoot and rule out what the cause is.

Tap to click not working properly in Mountain Lion. How do I get apple to fix this major issue with mountain lion?

The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?

Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected.

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Having major issues with InDesign CS6

Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file. Then when I relaunch, it is not allowing me to open the file again.
In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
I had to copy each layer on each page to create a new document. NOT GOOD!!!

SherwoodGirl wrote:
Having major issues with InDesign CS6.
Then post your qeustion on the Adobe forums is it's their software you're having problems with:
http://www.adobeforums.com

Having major issues with InDesign CS6. will upgrade fix???

Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file. Then when I relaunch, it is not allowing me to open the file again.
In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
I had to copy each layer on each page to create a new document. NOT GOOD!!! Just saw that ADOBE has an update for InDesign. WILL THIS FIX THE PROBLEM??

Yes, I would certainly get the latest update. That we often solve issues like these, for this is not normal. Some further tips would be quite InDesign, then to trash your InDesign preferences and then re-start InDesign (it will rebuild them again). Some further areas to look into would be:
* Corrupt Font(s) (or corrupt font caches - see below)
* Corrupt Image(s)
* Power Failures (power surges)
* Placing images via drag-and-drop from an Internet page
* Working on an InDesign file over a network or on a remote server
If all else fails, we as Markzware (I work for them) also offer a Service to fix corrupt InDesign documents. See:
http://markzware.com/support/faq/recover-bad-file-service/
Hopefully this helps you.
David Dilling of
Markzware

I downloaded Yosemite last week, having major issues with typing

dw yosimite last week and have had major issues with typing, cursor leaving page

Hi KevinfromGeneva,
Welcome to the Support Communities! Are you working with a wireless keyboard or mouse, or are you having issues with a trackpad? The article below offers general troubleshooting tips for issues with these input devices:
Troubleshooting wireless mouse and keyboard issues - Apple Support
Cheers,
- Judy

Having Major Issues with Flash Player

Using IE 8, 64 bit, flash player 11.4.402.287
Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open. This issue has been going on for weeks now. I have done everything the help said to do and still not working. I need HELP!

im using the recent adobe flash player
windows XP, internet explorer, 10.045.2, 32bit
im not sure how this works, but im sure all that is correct:)
if you need additional infomation, just let me know

Major Issues with views in A3

I am having some major issues with views in A3.
If you look at my screenshot I am in the Browser;GRID view, however many of my images are out of view to the right (should be 26). There is no way to see them or select them. Also note that there is no SIZE control on the bottom right!
If i view it in LIST mode, all my images show up. If I go to FULL SCREEN everything works like it is suppose to. It just happens in
http://farm5.static.flickr.com/4007/4354751139647d87b323b.jpg
Any ideas on how I can fix this?

If I go into split view, I do not get any scroll bars so there is no way of viewing all my images.

Major Issues with iPod Touch - Please help!

Hi, I am having major issues with my iPod, and nothing seems to be going right. It all started a few days after I got it for Christmas. I would wake up, and my iPod would be completely discharged even though it had a full battery and was turned off. I woke up one night and found that it came on all by myself. I sent it into iPod, and they sent it back saying nothing was wrong. Since I got it back today and within six hours, I have had four software crashes to the point where I have had to uninstall iTunes and restore factory settings four times. I am now on my fifth crash, but this time, the screen won't even come on. It keeps saying that it is in recovery mode. I simply went to turn it on! Does anyone have any suggestions? Personally, I think there is a short, and that I need a new a replacement. However, it doesn't seem like Apple is very supportive of the idea. I go through all of their steps over and over and over, and the same thing happens! What is going on? Please help.
Marie

sounds like, for the charging problem anyways, that you are just putting ipod into "Stand by" mode... press and hold the power key for about 10 seconds and an option to power off will actually come on.. if u just press it and let go, it just goes to stand by.. i have noticed stand by drains my battery
also, it doesn't sound like a short to me... the charging i am pretty sure is bc you are only putting it into standby however, the rest sounds like software.. did u try and restore using itunes or did you just reset the factory defaults?? Plug it into itunes and click restore under the ipod menu...
Message was edited by: Devin Stephens
Message was edited by: Devin Stephens

LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

Hello,
We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
- WS-C6505E-SUP2T
- WS-X6824-SFP-2T
There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
Do you have this issue as well ? Any direction or help ?
I am afraid of a potential bug...
Rgds,
Yoann

When you were placing the internal test calls, where was your phone located? The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A? Are these working fine? If not, then it's likely you do have a QoS issue over the WAN to Site A.
Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
Kind regards,
Craig

HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

How do you solve an issue with the card? I don't get the option of 'none'

I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
#1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
#2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
#3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
#4 Click on App Store (upper center of screen).
#5 Scroll down the screen page until you see Top Free Apps on the right side.
#6 Choose any one of the FREE apps.
#7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
#8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
What a pain in the keester, eh?

I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

Try these solutions: Error "Licensing has stopped working" | Mac OS

10.4.8 - Major Issues with Airport card on Intel 17"

Similar Messages

Maybe you are looking for