10.4.9 to 10.5.4 - should I update to 10.4.11 first?

I'm running great on 10.4.9 and just ordered 10.5.4 and just wondered if the upgrade would go smoother if I updated to 10.4.11 first.
If for some reason 10.5.4 doesn't run well, would it make more sense to do an archive and install or copy back my SuperDuper backup Tiger system and try the upgrade again?
I have checked my hard drive with Disk Utility and found no problems, and updated and upgraded all my software to be compatible with Leopard (except for CS2 - which I'm going to try and see how it works on the G5 - but I know it's not supported).

Karen S wrote:
I'm running great on 10.4.9 and just ordered 10.5.4 and just wondered if the upgrade would go smoother if I updated to 10.4.11 first.
No. No need to and why bother?
If for some reason 10.5.4 doesn't run well, would it make more sense to do an archive and install or copy back my SuperDuper backup Tiger system and try the upgrade again?
With a clone you have unlimited options. If Tiger is and has been purring along, the default install should work fine. Both my MBPs were upgraded that way. I still have Tiger on my TM backup drives in a separate partition.
I have checked my hard drive with Disk Utility and found no problems, and updated and upgraded all my software to be compatible with Leopard (except for CS2 - which I'm going to try and see how it works on the G5 - but I know it's not supported).
Again, I think you have planned well - and if the default install does not work, you can either reinstall Tiger and do an Archive and Install, or you can do an Erase and Install, from scratch (no pun intended) and migrate from your clone.
If you keep the Tiger clone, you can use it to run CS2 and any other apps that are not Leopard compatible.

Similar Messages

Work order should not update the fields in PR

Hi Gurus
My requirements is that workorder should not updates the purchasing data fields in PR do not go to the shoping cart. How can make it possible.
Thanks in Advance

Hi,
I am not sure of your requirement clearly but check up the below user exits :-
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
regrds
pushpa

Open orders should not update in MD04

Hi, SD gurus,
I have the below requirement,
My business scenario is
when total open sales order quantity crosses a particular number(Ex:1000 Pcs) in a month, after that whatever the sales order we create it should not update in MD04.
Our Business process,
1. Creating a sales order
2. Allocation run (here system will execute Credit check, availability check, and listing an Exclusion etc. here we need to enter sales order no, plant, allocation type)
3. Creating a delivery
4. Invoicing the customer
Note:
Usually when we de check MRP type and allocation in Scheduline category system should not update in MD04, but if we de check this as for our business process system should not execute Allocation run
Thanks in Advance
Yuvaraj.

Respected Lakshmipathiji,
Thanks for your clarification but i have query here..
""if the users are ready to do this manually once a line item exceeds 1000 pcs a month, well and good""
How users will check material wise?(suppose if sales order contains more than 100 line items and each line item will have its own requirement updates--will they do this material wise?)
Is there any report which give the Status on Requirements for group of materials(MD04 status) in Standard SAP??
Phanikumar

Downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?

downloaded Appleworks 6.2.9 for Mac Updater-2.sim but when i try to open the file i receive the message "legacy image should be updated". what does this mean and/or entail?

Mavericks is not recognizing the .smi extension - on my Mac it thinks it's a RealPlayer document. You are not going to be able to do anything with this - it requires AppleWorks to be present to be updated, and you can't run AppleWorks on Mavericks (other than by the rather roundabout process of installing Snow Leopard Server in Parallels and installing AppleWorks on that, as described here).

Should I update my iPhone 4 (4.1 to 5.0.1) or stay outdated? NEED HELP, PLEASE!!!!!!?

Ok, I know that this may be long but bear with me, really need your help guys!!!!
Ok, so a few years ago, I bought an iPhone 4 (I was in Zimbabwe, now in the US) that was factory unlocked from what I can tell. Reason why I "THINK" it's unlocked is because
1. It did not have Cydia installed when I got it, just stock with native apps only
2. Running on 02.10.04 Baseband (That cannot be Cydia Unlocked), I manage used several Network Providers and all Sim cards worked and still do, no problems. (Using T-Mobile Now)
3. Model Number is MC603B, and according to my research, it is a factory unlocked model.
Unless im mistaken???????
Here we go. The iOS 5.0.1 is out and I am now running iOS 4.1 (Jailbroken), which is really bakward, so loads of tweaks and apps cant run on my outdated iOS and i want iOS 5. I have heard people all over the internet complain that after the iOS5 upgrade, their phones locked-up and can't dowgrade or activate after the update, so if that happens im STUCK forever, and I really dont know what to do!!!!
HERE ARE MY QUESTIONS:
1. Is my phone really factory unlocked, based on what I listed above? Or is there any other way of checking???
2. If I DO update, do I risk locking-up my phone????
***3. Should I update it "while preserving my baseband" and still manage to Activate it, or just leave it to update my baseband????? PLEASE HELP. Read my questions carefully and answer on what you think.
Thanks alot guys

Well, since the iPhone is not officially sold in Zimbabwe, & that's where you purchased it, you can pretty much count on the fact that it was hacked to unlock it, regardless of what you think or see. Thus, you can be pretty much assured that if you update software your phone will be re-locked to the carrier it was originally locked to.

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

My MacBookPro is currently running on 10.6.8. What should I update to?

I am currently running 10.6.8 on my 2008 MacBook Pro. Processor speed:2.66 GH, memory 4GB. What operating system should I update to?

You might try Yosemite first, since it is free.
One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
If you don't like that, then Mountain Lion.
Mountain Lion

The Firefox checking system says that Shockwave Flash 10.1.82.76 (10.1.r82) is VULNERABLE and I should immediately update it. When updating I can find no higher version of Shockwave Flash that is compatible with my system. What should I do ?

1. I have an eMac running Mac OS 10.5.8
Processor Name: PowerPC G4 (3.3)
Processor Speed: 1 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 256 KB
Memory: 1 GB
Bus Speed: 133 MHz
2. I use Firefox 3.6.24 as my browser
3. The Firefox checking system says that the version of Shockwave Flash that I have installed, namely 10.1.82.76 (10.1.r82), presents a security VULNERABILITY and that I should immediately update it or disable it. On attempting to find an update I cannot locate a higher/more advanced version of Shockwave Flash that is compatible with my system. What should I do ?
Thankyou for any assistance.

The latest version for your system seems to be Flash 10.1 r102
Flash Player 10.1 Release Notes: (latest version for Mac PPC)
* http://kb2.adobe.com/cps/838/cpsid_83808.html
See (Released 11/04/2010) Flash Player 10.1.102.64 and 9.0.289.0 (126 MB)
* http://kb2.adobe.com/cps/142/tn_14266.html Archived Flash Player versions

I have problems updating my app in the appstore. How should i update using itunes? Currently, i'm unable to use all of my apps.

I have problems updating my apps in appstore for my IPad. How should i update it using itunes? I'm unable to see all the apps currently.

Hallo. If all of your apps purchases from the same Apple ID, you can try to update them on iTunes, ways as below:
iTunes 12 for Windows: Download previous purchases from the iTunes Store
iTunes 12 for Mac: Download previous purchases from the iTunes Store
Regards,
Anson

Should i update my iPhone, or does it cause too many problems?

should i update my iPhone to ios 5? because i have heard a lot of bad things happening so is it worth it or did you regret it? any thing that could be of help is much appreciated thanks

No, that's not true, if your phone is officially unlocked. You have nothing to worry about.

Should I update my iPad to ios6

Well in the setting Iam confuse, should I update it and if I update it are all app that I install will deleted or unistall itself some how?

I'm waiting til 6.1 as well.
That said, I do have 6.0 on my Touch and it seems to be working okay.
BUt I've read too many posts with issues and I'm just not in the mood to fight it in case I'm one of those that has problems.
As to doing a backup. YES. always, always, always do a sync before you update the iOS. Then, if something does go wrong, you have the most recent backup to restore to.

Should i update my 4s to ios 6

should i update my 4s to ios 6 ?? is it ok in india

Also, make sure you have the latest version of iTunes (I don't recommend installing OTA) and do a hard reset on your phone prior to updating.

I have a macbook i bought in 2011. Should I update my operating system.

Im using osx 10.6.8 on a mac book bought in 2011. should i update? obviously I don't know much about this stuff. Any help would be great.

Reasons to update include:
1. New features that are useful to you.
There are many new features between 10.6 and 10.10. Many of them involve iCloud, which allows syncing of content across your Apple devices. Some involve efficiency, increasing battery life and reducing CPU load. You can find reviews of each of the OS versions since SL online. Read them, and see if you think the features are of use to you.
2. Compatibility with application software that you want to run.
If you need to use particular apps, then you might want to use the latest versions, and they may require using a newer OS.
3. Bug fixes and security.
Whilst no release is bug-free, there is a general movement to get bugs fixed. Yosemite has benefitted from the public beta to have a lot of issues reported and fixed. It also includes security fixes that prevent malware from attacking your computer.
Reasons not to update:
1. Older software may not work at all or well on a newer OS.
You will have to make sure that all your applications, hardware drivers and other software is compatible with Yosemite. This may involve having to buy new versions. Snow Leopard is the last version that can run old PPC software, written for pre-2006 Macs.
2. Things are different!
A lot of changes have been made to the interface since SL. You will need to get used to them.
You could always install Yosemite on an external drive, and give it a test drive!

Should I update from SD23 to SD28 - Momentus XT

I realize there are numerous discussions regarding firmware updates and the Seagate Momentus XT but fearing my question would get lost among the others..I'm starting a new discussion on it here. If it needs to be moved please do so but at least it will have the opportunity to be answered.
I am currently running the following:
MacBook Pro 13" i3 2.3ghz with OS X 10.7.2 Lion
Momentus XT 500gb with firmware - SD23
Model: ST95005620AS
I've been running this______________^ since March 2011.
My question is simple. Should I update the firmware to SD28?
The reason I'm so far behind is because I didn't realize there were updates.
Thank you in advance,
Phil

Talked to Seagate representative:
He addressed my question without any problem and directed me to the following link which identifies whether or not your hard drive has an update available.
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931&NewLan g=en
There is a link within this webpage that checks your drive by model # and** serial #. To those wishing to upgrade the firmware..check first.
Phil

Can I, and Should I, update to Yosemite?

Can I, and should I, update my MacBook Pro to Yosemite? I have a Mac OS X version 10.6.8.

NO! don't update yet! wait! as i updated and now my mac is pretty much useless until apple decide to release another update and fix the bugs!!

10.4.9 to 10.5.4 - should I update to 10.4.11 first?

Similar Messages

Maybe you are looking for