10.4.9 update, sleep and QT issues

After the update it takes several tries to get the computer to go into deep sleep using the keyboard commands.
Also in the finder viewing some video the controls are missing and replaces by a mess of odd lines, the playback still works.

Since upgrading to 10.4.9 (from 10.4.8), last week,
1) I am getting erratic (wired, mighty) mouse behavior. Shows up as spontaneous, unwanted cursor-leaps OUT OF Safari browser window, most often to upper left (origin) of desktop, but occasionally to random locations on the right side of the desktop. But I have to figure out where the cursor disappeared-to, by wiggling it around, then reposition it where I want it.
2) I have had fairly regular disconnects in iChat. Occasionally I get a message saying that AIM is not available. But the party at the other end just sees that I am (suddenly) not online. Even after relaunching iChat. I strongly suspect that this is related to 10.4.9. It has NEVER happened while using 10.4.8.
If I could, I would back-out to 10.4.8 but - you guessed it - I did not back it up.
Any suggestions, or similar observations from anyone else out there?
Original 1.8 dual G5 desktop Mac OS X (10.4.9) also MacBook 2.0 GHz with 2MB + 10.4.8
Original 1.8 dual G5 with 1MB Mac OS X (10.4.9)

Similar Messages

10.5.3 Sleep and shutdown issues

I'm truly confused about the current issues I'm dealing with since my choice to upgrade to 10.5.3...
Since I upgraded, everything seemed to be fine until I closed my macbook and moved it into another room just to open it again. What happened? Nothing! That's the problem! The normally pulsing LED on the release button now stares at me with a constant, unchanging glow. I tried to open it and nothing happens! I was forced to hard boot my machine by holding down the power button only to be stuck with a lengthy boot back into the OS. Once I FINALLY got back to my desktop, I was able to hold option-apple-eject to put the macbook into sleep mode. The LED pulsed once again! I thought my troubles were over! Unfortunately, I was wrong. I figured it might be a good idea to cleanly shut down the machine and reboot it to reset the environment. My macbook never shutdown completely! It sat still with a black screen appearing to be off with the LED again.. Constantly glowing, unchanged... no pulsing... I let the machine sit there and do it's thing for several minutes and it never shut down... I was forced to hold the power button down to shut it off once again. Once the desktop arrived, I then tried again to do the apple-option-eject to place it into sleep and it gave me the unchanging, staring glow... Hard boot? AGAIN? What's going on here?
The most confusing part of this situation is it repeated the same symptoms after reinstalling the operating system from a complete erase and install. The only update I performed was the 10.5.3 combined upgrade after installing bare-bones Leopard from the installation DVD.
My kingdom for the ability to install 10.5.2 again! I've never had these issues before and I'm beginning to lose the faith I once had in the stability of this amazing operating system.

I've had the problem where my MBP doesn't wake up from sleep when I closed it recently. I think the problem is that when you close it, it writes all the information to the hard drive so that it can "hibernate". I've found (especially if I have a lot of things open) that if I open it too soon after closing, the best thing to do is close the lid until the light goes from solid to pulsing. This lets you know that the computer is actually asleep. After that, it should be ok to open the lid.

SUP - Update KB3000850 and other issues

Hello,
I manage a SCCM 2012 R2 Infrastructure.
I am trying to add the KB3000850 to my update package and I always get an error message.
I tried to resynchronize the SUP and still the same error.
Package:
　Success: The software updates were placed in the existing package:
Software updates downloaded from the internet
　Success: Update for Windows 8.1 for x64-based Systems (KB3000850)
　Error: Update for Windows 8.1 (KB3000850)
Errors
Failed to download content id 16836098. Error: There was an error downloading the software update. (12002)
Failed to download content id 16836099. Error: There was an error downloading the software update. (12002)
Language Selection:
English
Also,
- Some of the updates I deploy get stuck at 50% and the only option is to install the update manually...
- The update installation is very slow compare to a manual install
Have you already had those issues and how did you solve them ?
Thanks.

Hi,
The error 12002 means timeout.
Please check Patchdownloader.log to find more information.
There is a similar thread that the issue was related to proxy.
There was an error downloading the software update. (12002)
You could also check the Gerry's comments about this error in the blog below.
ConfigMgr 2012 / SCCM 2012 SP1 Step by Step Guide Part 16: Software Updates (Non-Microsoft)
Note: Microsoft provides third-party contact information to help you
find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
>>Some of the updates I deploy get stuck at 50%
You could check reports in the console and logs on the clients to find the reason.
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Petition to release updates faster, and fix issues

https://www.change.org/petitions/sony-release-android-updates-much-faster-and-fix-issues
Share this petition with anyone that owns a sony smartphone or tablet, because i believe this effects everyone.
Maybe this petition will proof sony that their poor sales are due them slacking, making them release updates much faster in future.
it also helps to tweat this petition on twitter to following hashtags #xperia #tablet #mobile #sony
i think sony makes awesome products, i would defiantly consider a xperia z in future, their only one problem sony is never up to date, and have lot issues bugs that can ****** anyone of easy.
i don't think its fair if jelly bean hits late april may for example, and android 5.0 gets released , and other brands like acer samsung asus etc push out updates much faster then sony does.
sony is by far the slowest updating their stuff, correct me if i'm wrong, anyway even if wrong they still way to slow, especialy considering the bugs surrounding their devices like the xperia tablet s or tablet s1
Solved!
Go to Solution.

Have anyone tried sending an email to the Xperia Blog (http://www.xperiablog.net) regarding the petition and asking them to write something about this?
It wouild generate some more buzz and perhaps a few more signatures.
UPDATE: I've sent an email to the Xperia blog asking them to write about the petition.

Sleep and Shutdown issues after upgrading to Windows 10

Hi there,So I'm having issues with sleep and shutdown after I upgraded to Windows 10, the laptop won't go to sleep or shutdown properly. The screen turns off, but the power LED stays on and the fan as well. If I chose sleep it won't wake up no matter what I try, and I'd have to perform a hard shutdown everytime.Any solution for this problem?Thanks.

**I have posted this in another area with the same issue** YES!!!!! A Solution that worked. Spread the news. It has to do with the Intel Virtualization Tehnology. Didn't know what that was until this issue came up in Windows 10. First, find out if this is your issue. 1. I installed the 'Intel Processor Identification Utility' directly from Intel.2. After installation, open the program and go to the 'CPU Technologies' tab.3. If it says 'YES' for Intel Virtualization Tehnology, proceed. Solution...(at least on my system) 1. The next thing you have to do is go into the BIOS. If you have not done this before, proceed at your own risk. You need to restart the computer and enter the BIOS (for me I hit F10 at the HP screen)2. Within the BIOS, there is an 'Advanced Options' section3. In this section there is a line for 'Intel Virtualization Tehnology' and it will say enabled or disabled. My computer said disabled.4. If this is the case, change the option to 'ENABLED'; then SAVE and EXIT from the BIOS. The Computer will restart and from that point on Shut Down, Sleep, etc. has worked. WOW this was a frustrating issue. Almost went back to Windos 8. I take no credit for this solution, I pieced it together from other posts on this issue. Hope this helps.

X220 resume from sleep and boot issues

This is driving me crazy! I have an X220 with Windows 8 and UEFI boot installed.
It all started when I first installed Windows 8 a few months ago which required me to update my BIOS to the latest version. The installation process often got stuck when booting from the Installation CD (the round circle stopped spinning, the display was at full brightness). Eventually I managed to boot into the Installer (when the boot logo doesn't get stuck, the display is then dimmed to minimum).
I was quite happy to have a superfast lightweight OS which booted in an instant.. When suddenly it started to get stuck when booting (same issue with the boot logo not spinning anymore). This happens quite randomly, but I often manage to boot (maybe 2-3 times a week, I don't boot often though..). Now, the booting hangs are less of an issue for me but more often that that it fails to resume from sleep. The LEDs flash and then it instantly drops to sleep mode again (well at least the sleep/moon LED is active). This happens quite often as I sleep/resume up to 5-10 times a day (changing lecture rooms, meeting rooms, save battery when the lectures are boring, ...)
Now after researching and spending hours in debugging this issue, it seems that I'm not the only one having this (or a similar) issue, but often without any definitive solution being specified.
This is what I have already tried:
* Upgrade BIOS and SSD firmware to latest
* Install/update latest drivers
* Mess around with BIOS options
** UEFI/Legacy First options
** Intel Virtualization/vt-d
** Others..
I know based on other threads that I'm not the only one experiencing exactly these issues. Has anyone managed to fix this?
Thank's in advance
Fabio Scala

I had a similar issue, as soon as a described even a little bit of it to warrenty support they sent someone to swap the board
It seems thats the only fix, its been fine since

Sleep and Battery issues-- Back to Tiger?

(Half of this relates to a thread of mine called "Dead Battery?"-- I tried all the fixes proposed and it's still unclear if my battery is fine or dead.)
I'm having battery and sleep problems that started after installing Leopard and I'm wondering whether I should:
1) Go back to Tiger and see how things are.
2) Format and install Leopard again (I didn't do that the first time)
3) Do something else.
The details are:
My battery shows 0%, the computer recognizes it's connected to the AC adapter, but "Battery is not charging" shows in the drop down. Coconut says the current charge is 0 of a maximum of 4164mAh (Apple System Profiler agrees with those stats). Yesterday it said my capacity was at 94% of it's original, but I pulled the battery last night to reset the PMU and now it can't give me the original capacity. It also listed 111 loadcycles, but now (post PMU reset) it and profiler say 0 Cycles. My battery was working fine the day before and would give me a few hours of use on a full charge.
My computer has also had issues coming back from sleep. The screen will stay sometimes stay dark, but repeatedly holding the power button will suddenly bring it back. I was using it this morning, closed it for five minutes, and when I came back it would make a noise (the mechanical "HD waking up noise"), give me 4 seconds of my screen, and then the screen would go very dark (but not completely out). If I held the power button I could get 4 more seconds. This repeated until I ctrl-apple-power and it restarted just fine. I've never seen my machine do this before.
I have reset the PRAM and the PMU and tried different power adapters.

I use SoundHound, had no such problem.
If my post has helped you, give it a LIKE

SSD sleep and iMovie issues

Hi everyone, I asked this question on the iMovie forum but think it might be relevant here as well.
I have installed an OWC SSD in the 2nd optical bay on my Mac Pro. OS and only a few apps on the SSD, less than 30% used. All my photos and videos are on a 2 drive RAID 0 where they were before installing the SSD. Before the SSD iMovie would launch and load projects etc. in 11 sec first time then 6 sec subsequently. Now it takes 40 seconds to load the projects etc. every time I launch it. (The app launches in a second or two it's just loading the content that takes the time)
Photos on the RAID open in PS5 quickly, just iMovie is slow. (The iMovie library is about 400GB)
There are some other issues as well: When waking from sleep the computer often hangs in weird ways.
Sometimes I can launch, say, Safari but it won't load a page and if I launch iTunes it will try to launch then stop then everything is unresponsive needing a hard reboot. Other times after waking from sleep nothing will respond. I have "put hard drives to sleep" unchecked.
Could this all have something to do with the drive being plugged into the mother board? Is there a difference between that and the normal drive bay connectors?
Final bit of info..I still have the old boot drive installed but in the optical drive bay with the SSD. I have renamed it "Old Macintosh HD". I deleted iMovie and all the preference files from it.
Anyone have a suggestion?

Hi Hatter, The home user account is on the SSD but all content (video and photos) is on the RAID.
I did a clean install of SL on the SSD.
I seem to have resolved the iMovie issues by one or more actions including demounting the old Macintosh HD, deleting empty projects and event folders in the movies folder in the home folder and ditching the iMovie prefs.
The sleep issues remain though.
When waking from sleep if I click on Safari it just bounces in the dock and never opens. It stops bouncing and basically gives up after about a minute. Same if I click on iTunes.
I can click around the desktop but the selected actions just don't happen. If I choose retart nothing happens and I have to do a hard reboot.
Last time I woke it from sleep though I waited at least 10 seconds before trying to do anything and it was OK.
Also it seems as though the HDs are spinning down when not in use even though that pref is unchecked.

Having trouble with 10.4.6 update - ipod and isight issues

Hi everyone.
Got my first mac a few weeks ago, and ran a host of updates all at once, so to be honest, I'm not sure which one is causing the problem.
However, since running the following, my built in isight no longer works, telling me "no camera is attatched or it is being used by another app."
I ran the updates whilst my ipod was connected (via USB), and now my ipod is not being recognised at all, in itunes or on the desktop.
I've tried turning off, unplugging everything, deleting all 3rd party apps, but all to no avail.
My main question is, is this a known problem and will a further update sort it, or do I have to contact apple and send it back?
Thanks for reading this, and thanks in advance for any advice.
Cheers, Ben.
"QuickTime" (7.1)
"iTunes" (6.0.4)
"GarageBand Update" (3.0.2)
"iDVD Update" (6.0.2)
"iPod Updater 2006-03-23" ( )
"iWeb Update" (1.1)
"iMovie HD Combo Update" (6.0.2)
"iPhoto Update" (6.0.3)
"iMac SMC Firmware Update" (1.0)
"Keynote Update" (3.0.1v2)
"Pages Update" (2.0.1v2)
"Mac OS X Update Combined (Intel)" (10.4.6)
"J2SE 5.0 Release 4" (4.0)
"Front Row Update" (1.2.2)
"Apple Keyboard Update" (1.0)
"Security Update 2006-003 (Intel)" (1.0)
"iWeb Update" (1.1.1)

Some sucsess so far.
If I plug the ipod into my hub then it seems to work fine. But both my ipod and an external drive don't work through the other two usb ports. I'm assuming that that must make it a hardware fault, but odd that it should only occur after the update!?
I'm currently backing up everything, but once that's done I will try different devices through different ports.
The isight is the built in one though, and doesn't appear in system profiler. Once I've backed up I might try reinstalling photobooth, imovie and ichat. If that fails I might reinstall os x.
Does this all sound resonable?
And thanks for the help! The speed and quality of the replies have really impressed me.

Sleep and maintenance issues

I understand that the Mac will perform routine maintenance at night, if I do not allow the computer to sleep. But suppose I select "never" for computer sleep but check off "allow hard disc to sleep when possible". Will the computer still perform the maintenance? Also, I would like to know what maintenance is performed. Is it everything shown in the ONYX freeware?

But suppose I select "never" for computer sleep but check off "allow hard disc to sleep when possible". Will the computer still perform the maintenance
Yes.
Also, I would like to know what maintenance is performed. Is it everything shown in the ONYX freeware?
No, the only tasks that are run automatically are the periodic scripts.
See: http://docs.info.apple.com/article.html?artnum=107388
FWIW, The other scripts run by OnyX, Cocktail, Yasu, etc., are not considered to be a part of a normal maintenance regimen, though many people use them that way. Cleaning caches, deleting rotated logs and the rest are tasks that would be recommended as troubleshooting steps, and running them can slow performance (startup, application launches...) until these caches rebuild themselves.
Tuttle
1424/8132

Problem in sleep and hiberbate as system restarts if sleep or hiberbate

Dear Sir/Madam,
Please find solution for the problem of video card driver. My system works well when automatic update from windows 8.0 to windows 8.1 is done the system stops going to sleep or hibernation.
There is problem with catalyst control center (error is settings not found)
After updating Bios and All drivers the problem is not resolved.
Best regards,

Hi @Puneet1 ,
Welcome to the HP Forums!
It is a great place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that after updating your Windows 8 to 8.1 you are experiencing an issue with sleep/hibernation and the Catalyst Control Center.
For the Catalyst Control Center I suggest you download the updated driver and save it.
Uninstall the current drive and delete it
restart your notebook and install the updated driver from where you saved it.
Here is a link to HP PCs - Troubleshooting Sleep and Hibernate Issues (Windows 8).
If the sleep/hibernation issue remains you can try this step.
Go to the command prompt and run as administrator
Type powercfg -restoredefaultschemes and press enter.
If your issues still remain, I suggest you try installing the original drivers from the recovery manager.
HP PCs - Using Recovery Manager to Restore Software and Drivers (Windows 8)
Next I would do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 8)
There will be an option to backup your personal files to prevent data loss.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
You may choose to contact HP support for assistance at any time.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

System sleep and shut down not working after upgrade to windows 10

HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone suggest, what to do ?

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature. Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them. 1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try. 1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook. Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter. I hope this helps! Have a great day!

How to install this update and solve USB and touchpad issues?

I have Equium M50 (59E) and got bitten by an update that took out my touchpad and keyboard .I have made fresh install of XP Home and have all updated drivers and all is going well .The last update i cant seem to fathom is for
Driver Ana _2005_10_24_V1.2 it is for ,Standard Open HCD USB Host Controller........X 2 .........
The update fixes all kinds of issues of the kind i am having and is a recomended update from Driver detective ,that i use offten .
The trouble is it says to uninstall drivers for the one i have installed allready and when i do this it knocks off my USB mouse leaving me not able to install the new ones .When i reboot it installs the ones i dont want reinstalled .
This is the read me off the new update and realy it is beyond me to underdstand what to do ............so here it is ?
Driver revision history:
Twinhan VP704A Driver Release note
Note:
1.In case the system crashes while running with VP704A, Please install ULI
USB 2.0 host driver in \ULiUSB20Driver
2. For XP/SP1, please update with the patch in
<http://www.microsoft.com/downloads/details.aspx?displaylang=zh-tw&familyid=733dd867-56a0-4956-b7fe-e85b688b7f86>
3.In XP/SP1, updating driver will crash the system, while new install is ok.
The trick to update driver in XP/SP1 is shown in the following steps,
a. Uninstall the driver
b. Unplug and plug the USB device
c. Install the driver
4. To support remote controller, please launch Agent.exe in \Agent.
Further details can be found in \Agent\Readme.txt
Known issues:
1. Multi-instance is not supported
2. Remote wakeup is not supported
3. High CPU usage in Analog audio/video capture
4. Bad VBI Signal using YUY2 color format
5. AV out of sync if audio captured from wrong filter.
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
6. Noise with analog-TV and FM Radio
(Fix:using the filter "USB Audio Device" in WDM stream capture device)
Driver revision history:
2005/10/24, Version: 1.0.2.8
Bugs fixed and new features:
1.Crossbar not properly set.
2005/10/21, Version: 1.0.2.7
Bugs fixed and new features:
1.Firmware version read from FLASH OK!
2005/10/14, Version: 1.0.2.6
Bugs fixed and new features:
1.Mutil-Access driver blank part below part screen when VBI!
2.Mutil-Access driver HCT driver verify crash fix!
2005/10/07, Version: 1.0.2.5
Bugs fixed and new features:
1.Tuner Power off when S-Video,Composite.
2005/09/30, Version: 1.0.2.4
Bugs fixed and new features:
1.Agent.exe updated for repeat bug!
2.TI5150 Register for Video Format fix!
2005/09/29, Version: 1.0.2.3
Bugs fixed and new features:
1.A trial driver build for multiple access support. (in the folder "\Multi-Access")
Note: "USB Audio device" filter provided by system does not support mutil-Access.
2.Reset TI5150 when a new frequency is set
2005/09/27, Version: 1.0.2.2
Bugs fixed and new features:
1.Fix I2C unstable access on some devices.
2005/09/23, Version: 1.0.2.1
Bugs fixed and new features:
1.Analog TV becomes darker sometimes.
2005/09/15, Version: 1.0.2.0
Bugs fixed and new features:
1.Fix INF for Windows 2000 installation.
2.FM radio scan policy changed!
2005/09/13, Version: 1.0.1.9
Bugs fixed and new features:
1.USB serial number string not visible with USBView, firmware update required.
2.FM radio scan policy, return unlock if PLLOffset>=9x12.5KHz
2005/09/13, Version: 1.0.1.8
Bugs fixed and new features:
1.After switching between A/D/AV several times, video display becomes dark in THDTV 2.61
2005/09/12, Version: 1.0.1.7
Bugs fixed and new features:
1.Improve channel lock status check performance
2.Pinnacle INF Fix.
2005/09/09, Version: 1.0.1.6
Bugs fixed and new features:
1.Add some audio initialization function.
2005/08/31, Version: 1.0.1.5
Bugs fixed and new features:
1.NTSC & PAL mode resolution separation.
2005/08/30, Version: 1.0.1.4
Bugs fixed and new features:
1.AvgTimePerFrame.
2.Frame Drop.
3.Pinnacle inf file HCT chkinf fail.
2005/08/22, Version: 1.0.1.3
Bugs fixed and new features:
1.Add Remote controller interface in digital source filter.
2.A new Remote controller test tool with source code in \Test_RC.
2005/08/16, Version: 1.0.1.2
Bugs fixed and new features:
1.Reorg Pinnacel & Twinhan's driver & folder.
2.VP704A_BDA_Test tool, add system code test.
3.Set IR protocol standard by registry keys "IRSTANDARD", "IRSYSCODECHECK1" in INF file.
4.Firmware update
2005/08/15, Version: 1.0.1.1
Bugs fixed and new features:
1.Serial number function is lost while adjusting TV audio volume
2.RC6A CIR support
(This firmware uses GPIO3 (M9207 pin 80) to decode RC6 protocol.
The hardware should be reworked to connect M9207 pin 80 to CIR module and the fimrware
EEPROM should be flashed with \Firmware\M9207.bin )
3.Serieal number, MAC address and OEM device name supported.
Please refer to further details in \Firmware\readme.txt.
4.Ioclt sample source code included.
2005/08/08, Version: 1.0.0.10
Bugs fixed and new features:
1.Analog TV audio volume increase.
2005/08/04, Version: 1.0.0.9
Bugs fixed and new features:
1.Analog TV Video mode set failure.
2005/08/03, Version: 1.0.0.8
Bugs fixed and new features:
1.Off-centerf requency scan +/- 125Khz
2.Fix duplicated program scanned in MCE.
2005/08/02, Version: 1.0.0.7
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" bug fixed
2005/07/28, Version: 1.0.0.6
Bugs fixed and new features:
1.THBDAConsole.exe "ulFixedBW", "ulDisableOffFreqScan", "ulMCEFreqTranslate" support
2.Improve I2C communication stability.
3.Unify Signal strength & quality indication as THBda ioctl interface.
4.Capture filter Lock status check.
2005/07/28, Version: 1.0.0.5
Bugs fixed and new features:
1. The same signal strength & quality indications as VP7046.
2. Debug build driver
2005/07/21, Version: 1.0.0.4
Bugs fixed and new features:
1.Update INF.
2005/07/20, Version: 1.0.0.3
Bugs fixed and new features:
1.Improve performance in PCM4
2.Switching from Analog TV Mode to FM Mode failure
2005/07/04, Version: 1.0.0.2
Bugs fixed and new features:
1.Production Tool FM test OK!
And here is the readme from the other file within the update ?
ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME , Windows 2000 and Windows XP
INTRODUCTION
This driver supports ULi EHCI host Controller under Windows 98 SE, Windows ME , Windows 2000
and Windows XP.
CONTENTS OF THIS DOCUMENT
1. Installation Instructions
2. Uninstallation Instructions
1. Installation Instructions
(Windows 98 SE & Windows ME)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system,then restart your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows 2000)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller" and install the driver.
(Windows XP)
A.When ULi USB 2.0 Controller has attached on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- Click "NEXT"
- This program will install and load the driver and you don't have to reboot the
computer.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
- This program will install and load the driver and you don't have to reboot the
computer.
B.If no ULi USB 2.0 Controller on system
1. Install ULi USB2.0 Driver
- Run the setup program.
- This program will copy driver files into your Windows system, then turn off
your computer.
- Attach ULi USB 2.0 Controller card on your system and then reboot your computer.
2. After system reboot, Windows will find the new hardware "ULi PCI to USB Enhanced
Host Controller", continue to install.
- After install ULi USB 2.0 driver successfully. System will detect "USB 2.0 Root
Hub". Please select "install the software automatically (Recommended)" and then
click "Next" button to continue install.
Notice:
If you can't setup driver successfully. Please reboot your system and then follow
above steps to install driver again.
2. Uninstallation Instructions
1. Open "Control Panel" folder.
2. Invoke "Add\Remove Programs" icon.
3. Choose "ULi USB2.0 Driver" item.
4. Click on "Add/Remove" button to remove drivers.
Change List:
1.74
1.fix issue that multi-interface keyboard can not be detected on the usb2.0 hub.
2.support all USB2.0 Host Controller.
1.73
1.fix issue that On Win98SE , Blue screen when unplugging some USB2.0 Scanner after scanning image.
2.fix issue that On Win98SE, Blue screen when unplugging some USB2.0 Scanner from USB 2.0 Hub after scanning image.
3.fix issue that On Win98SE, Blue screen while copying files across the SUNBOX UH-204 Hub.
4.fix issue that wirless lan will disconect when plug-in usb device.
1.72
1.Fix issue that system will crash when USB HD copy large file.
1.71
1.improve Power management function in Win98/ME.
1.70
1.Improve the function of devcie detection.
1.62
1.Fix the problem that a USB floppy under USB 2.0 HUB cannot function when system resume from suspend.
1.61
1.Fix the problem that some USB device under USB 2.0 HUB cannot be found if system resume from suspend.
1.60
1.To support power management functions when a HUB with USB device plug into
a root HUB.
1.57
1.Fix USB floppy with USB 2.0 HUB can't be detect issue.
2.Fix issue that audio can't display smooth when USB device attach to system.
3.Fix system can't detect USB dvice when USB device attach to system in
suspend mode.
4.Fix issue that when USB root HUB have full loading, USB HD sometimes
transaction fail.
1.56
1. Fix issue that DVD decoder device can't display properly.
1.55
1. Fix OTI USB 2.0 hand drive can't be detect issue.
2. Fix USB mouse can't use after resume from suspend.
1.54
1.Improve driver security.
1.53
1. Fix bulk transfer may stop if USB device is plugged in USB 2.0 hub
2. Fix USB 2.0 mass storage device can't be access after resuming from standby if there is another USB 1.1 device existing
1.52
1. Fix system pages fault when accessing mass storage device in Win98SE, or scandisk failure when selecting
automatically fix file system errors
2. Fix system may hang up in Win98SE/ME if USB 2.0 cardbus card is plugged
v.1.51
1. Improve USB 2.0 cardreader compatibility.
2. Fix USB IDE devices can't be accessed after resuming from standby/hibernation.
v1.50
1. Improve bulk transfer
v1.48
1. Fix USB 2.0 LAN driver installation hanging up
2. Fix some USB 1.1 cardreader can't be identified when plugged into USB 2.0 hub
3. Fix some laptops Win98SE booting hanging up
v1.47
1. Improve bulk transfer performance.
2. Fix USB 2.0 bulk webcam preview failure.
v1.46
1. Support USB 2.0 and 1.1 Isochronous devices
2. Fix system hanging up when rebooting system if USB 2.0 host controller is disabled in Win9X/ME
3. Fix system hanging up when uninstalling driver if there are USB 2.0 devices connected in Win2K/XP
4. Improve device detection capability in Win9X/ME
v1.45
1. Fix system hanging up when resuming from ACPI sleep mode.
2. Fix mouse sometimes doesn't disappear when it's unplugged.
3. Fix Win9X composite device detection failure and improve Win2K/XP composite device
v1.44
1. Support composite device
2. Improve device detection
v1.43
1. Improve IDE read/write transfer failure rate with USB 2.0 to IDE bridge on PC card platform
2. Fix high-speed device detected as full-speed device
3. Fix some USB mouses detection failure problem
4. Fix some USB 2.0 hubs detection failure problem
5. Fix Win98SE crashing if ULi EHCI 1.42 is installed
v1.42
1. Fix PC Card ejection hanging up in Win98/ME
2. Fix suspend/resume hanging up in Win98
3. Solve sometimes USB 1.1 device can't be detected if OS boots with USB 2.0 and 1.1 devices plugged
4. Fix some PC Card USB 1.1 device detection failure
v1.41
1. Add new feature that system can install driver before device is plugged.
2. Fix PCMCIA OHCI controller resource assign issue on Windos ME.
v1.40
1. Support Win9X/ME/2K/XP with ULi USB 2.0 driver.
2. Fix PCMCIA EHCI controller detecting USB 2.0 device problem in Win9X/ME.
v1.32
1. Fix issue that driver can't detect Microsoft driver in Windows XP
if OS path is not c:\windows.
2. Fix issue that driver can't detect USB 2.0 controller device in in some system.
v1.31
1. Fix issue that driver can't install on Windows 2000.
v1.30
1. Fix issue that Win9X/ME shows no USB 2.0 Root Hub.
2. Fix issue that hanging up when second entry into Win9X S1 with HID device plugged.
3. Fix issue that sometimes when you click "Scan for hardware changes".
to PNP ULi USB2.0 controller, system will informs you the usbehci.sys
file can't be found.
4. Fix issue that v1.20 finds no EHCI controller to install driver for after different
verison of ULi EHCI controller devices are plugged and unplugged.
5. Support installing driver for more than one ULi EHCI controller devices existing on
system at the same time.
6. Fix Win2K/XP shows USB Root Hub for USB 2.0 Root Hub.
v1.20
1.Support ULi USB 2.0 Host controller driver for Windows 98SE/ME/2000/XP.
ULi Coporation. (ULi) web sites:
http://www.uli.com.tw/ (Taiwan)
CAN ANYONE TREAT ME LIKE A TWO YEAR OLD AND GIVE SOME GUIDANCE AS TO HOW TO ACHIEVE THIS UPDATE .
i WOULD BE VERY GRATEFULL AND KIND OF THINK IT WOULD BE BENIFICIAL TO A LOT MORE PEOPLE AS I SEE A LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSED TO FIX .

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Toshiba USB Sleep and Charge causes s3 wake issues

Toshiba Satellite P500-ST6844
PSPGSU-0Q2012
Windows 7 Ultimate SP1 x64
I have posted before about an issue with my laptop not waking from sleep properly, (see here)
basically my problem is this:
I put the laptop to sleep and everything appears to go normally. but when i go to wake the system up, the Toshiba boot logo is shown, and i have lost my windows session. the system acts like it is cold booting, except for a 30 second pause following the boot logo. Just to be clear, once my windows is up and running again my session is not restored, so my system has not gone into hibernation. this issue does not affect hibernation mode. Hibernation mode works perfectly. Only taking out the battery and unplugging the machine and then pressing the power button for 30 secs. seems to alleviate the issue. but the issue always seemed to return. after much trial and error, I have narrowed down the cause of the issue. if the Toshiba USB Sleep and charge feature is used, the sleep problem is triggered, even if the sleep and charge port is not being used. This issue occurs even in a clean state (clean from a factory restore using restore media). this sleep issue has been occurring since i bought the laptop in 2010, but it has been only in the last 2-3 months that i have been able to narrow down the exact trigger for the issue.
I have updated to the latest version of the sleep and charge app for my laptop, but this does not seem to help any. the issue does not seem to be triggered by just activating or deactivating the USB sleep and charge feature in bios, but using/configuring the sleep and charge feature using the Toshiba application in windows, does.
I don't know if this is indicative of a bios, software, utility, hardware, or power supply issue. I am hoping some one here might have an answer for me, or at least point me in the right direction on where i can go from here.

this behavior even occurs in a "factory fresh state" - (restored from OS recovery media). In that state, only toshiba stuff is installed..
Sounds like you found a bug.
-Jerry

Keyboard and mouse issues following Snow Leopard update

I have a relatively ancient iMac--first aluminum bodied Intel-based model c. 2007. I was having issues updating my browsers (firefox, chrome) because I was on the old OS X (10.5.8 I think). So I did the Snow Leopard upgrade and since then have been having persistent keyboard (aluminum wireless) and mouse (mighty mouse connected via USB) issues.
I have verified the keyboard is connected via Bluetooth. I have verified that the keyboard is responding by opening the keyboard viewer and watching each of the keys light up as I type. Also, the keyboard will wake the computer from sleep and sometimes allow me to toggle between programs with Command+Tab.
Nevertheless, the keyboard will NOT type inside programs such as Word and Chrome. (It WILL type in the Post-it Note dashboard app, but I can't copy and paste into a browser from there.)
The Mouse will work in Chrome but in Finder and iTunes, e.g., it will not work. I can't use the mouse to select a folder in the folder tree to the left or to select a song or file/folder in the main window. I CAN, however, use the mouse to minimize/maximize/close each window.
Rebooting corrects the problem temporarily, but if I get up and walk away for a bit the keyboard and mouse re-freeze upon returning.
I have reset the PRAM and SMC because I saw these fixes listed in other discussion threads. Neither has fixed my issue.
Any help would be greatly appreciated.
Cheers,
Steve

Hi Steve,
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

10.4.9 update, sleep and QT issues

Similar Messages

Maybe you are looking for