10.4 Installation Failure on clean disk

Hi,
Powerbook G4, 15", previously running 10.4.6.
I've been having problems for most of June. Started when Virtual PC crashed on me and overwote dirrectory information on my disk. After recovering the files, I cleaned off the disk reinstalled Tiger 10.4, installed all the updates back up to 10.4.6, updated Vitual PC up to 7.02, recrashed, redestroyed the volume, restored the disk (combination Techtool pro and disk utility), tried installing 10.4, failed with a message " there were errors installing the software, please try installing again", cleaned off the disk completely, retried the OS 10.4 install, failed again with the same message, zapped the PRAM, retried the install...screen of death...
I'm at a loss. Its a totally blank drive with a system that worked on this laptop before. Could the Superdrive Firmware update be causing this?
Thanks for your advice....

Hi Spatial,
The two things I'd do if I was there are to check the system hardware and reset the power management unit.
The gray disk(s) that came with your system include Apple Hardware Test. Look for the disk that says AHT in small letters. Boot from it, choose language if asked, and run the extended test. Be patient -- AHT takes some time to boot and run.
Reset PMU: unplug the PB and take out the battery. Press Shift-Option-Apple and the power button. One second is enough. Release and wait ten seconds.
Does it blue screen during install, after install, or after rebooting following the install?
Good luck,
John

Similar Messages

Installation Failure: Audition 3 disk not recognized

When I place the Audition 3 disk into my CD/DVD drive to install, it whirrs a bit then...nothing.
When I look at the CD/DVD drive using windows explorer it displays a file view of D: (my CD/DVD drive) with nothing in its file listing. The view of the listing of files thats supposed to be on the CD is a complete blank. I have View hidden files in XP turned on.
My system:
Cd/DVD drive by Memorex dvd 16+ dl4rwid2. Drivers are up to date
Win XP Sp3
I've tried placing the media in my laptop and it reads the disk ok (but that's a vista machine). So I know the Audition 3 disk seems to be ok.
Coming back to the XP machine, I have successfully installed many other programs INCLUDING Photoshop, and just yesterday: Illustrator -- all from the same drive. Audio CDs and Video DVDs play no problem. As a matter of fact, I have been able to install the Loopology disk in the Audition 3 package! I've called Adobe support -- they were a big help: "talk to the hardware manufacturer". Sheesh.
I've even tried to copy the contents of the Audition 3 disk to the desktop usig the DOS prompt but it returns and error "the device is not ready". That's the same error you'd expect to see if there was no media in the drive. So it seems like the system does not recognize the Audition 3 installation disk at all.
The Audition 3 installation disk is the ONLY disk my system has EVER not been able to read.
Has anyone else seen this installation behavior with the Memorex dvd 16+ dl4rwid2?
Any ideas on how to fix this?
Thanks for the help.
Mark

Here is how I solved this. It was really quite simple once I thought through the problem.
I took the disk to my laptop (which could recognize the disk, but where I did not want to install the app) and copied all the files into a subdir (called it TEMP) on the Laptops desktop. (the disk buzzed/vibrated more than usual during this task, so I guess it was out of balance. That's why it probably failed in my desktop drive)
Anyway, I then burned the files in the Temp subdir to a blank CD on the laptop...took the newly created CD over to the desktop machine (that was not recognizing the original Audition 3 disk), put the newly created CD into its the desktops drive, and poof...it worked! Installation proceeded normally with the newly created CD.
Cheers!
Mark

FCS 2 Installation failure on 10.6.7

I'm installing FCS 2 on a MacPro 2 x 2.26 GHz Quad-Core Intel Xeon running 10.6.7 with 8GB of RAM
The installation runs normally up to the very end - just before it asks for the Motion Content disc. It asks for the main install disks, after insertion I get an Installation failure error message.
This is a cross grade version of FCS 2 from a prior version of FCS. Both versions were previously installed and operated as expected on my MBP 17 2.6GHz Core 2 Duo running Leopard 10.5.x
I was able to get it to finally load on the MBP 17 running 10.6.7 but only after several attempts.
Any thoughts or suggestions? I've repaired disk permissions on the MP.
Thanks
Bill

The absolute best way to install Apple's pro apps is a clean install, which involves cloning/backing up your system hard drive, then installing the OS, followed by the apps.
The next best option is to use FCS Remover ( http://www.digitalrebellion.com/fcsremover/ ) to completely remove any components left from the previous version, then install the upgrade from the install discs (or disc images if you made those).
-DH

Oracle Grid Installer cannot list available disks

Hi all,
I'm trying to install Oracle Database 11g R2 64-bit with ASM on an Oracle Enterprise Linux 5.5 64-bit.
The problem I'm facing is that the Grid Infrastructure Installer cannot list available disks. In the setp of creating Diskgroups, I only see blank disk.
Following the main actions I took:
[root@srv07 ~]# fdisk /dev/sdb
Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-1638, default 1):
Using default value 1
Last cylinder or +size or +sizeM or +sizeK (1-1638, default 1638):
Using default value 1638
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
[root@srv07 ~]# rpm -qa | grep oracleasm
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-194.el5-2.0.5-1.el5
[root@srv07 ~]# oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface [grid]:
Default group to own the driver interface [asmdba]:
Start Oracle ASM library driver on boot (y/n) [y]:
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
[root@srv07 ~]# /usr/sbin/oracleasm createdisk DISK1 /dev/sdb1
Writing disk header: done
Instantiating disk: done
[root@srv07 ~]# /usr/sbin/oracleasm listdisks
DISK1
[root@srv07 ~]# /usr/sbin/oracleasm scandisks
Reloading disk partitions: done
Cleaning any stale ASM disks...
Scanning system for ASM disks...The log generated by the Installer can be viwed from: http://www.ahmedbaraka.com/temp/infralog.txt
Any guideline is appreciated.

Hi Srini,
I have tried as you mentioned like installing Java in C:\Java... and I have tried the by setting the JRE_LOCATION of local path. No use of it.
tried with -jreloc and setting the java path in environment variables too.
As I understand, the problem i have seen at files copied path is not expected as required. Please see the path below...
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\bin\javaw.exe.
After running the Setup.exe -deinstall... temporary folder is creating with timestamp and all the required files are coping here...
"jre" folder also created and copied required java files directly into jre folder, but not in jre\bin folder.
folder path is like this
C:\DOCUME~1\v859971\LOCALS~1\Temp\OraInstall2013-09-06_03-36-31PM\jre\javaw.exe.
Setup application is expecting jre\bin\javaw.exe, but folder structure is created as jre\javaw.exe. There it is coming the issue.
I have even tried with copying all the files into bin folder and executed the setup.exe, it again creating a new temporary file
not able to resolve it...

Adobe Player for Embedding installation failure

Multiple tries but only failure - have tried both the automatic update and also the standalone installer. Zero sucess. Since I have CS5 Master Collection hate to wate the better part of the day doing a clean re-install. Here is my most recent update log file.
Any suggestions on what I should try are welcome!
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Visit http://www.adobe.com/go/loganalyzer/ for more information
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
Win OS version: 6.1.0.0 64 bit Type: 1
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 185.497 miliseconds (0.185497 seconds) DTR = 21.5637 KBPS (0.0210583 MBPS)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup
Updating media info for: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name:
Path: C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
-------------------- END - Updating Media Sources - END --------------------
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x64 ---------------
[    4956] Sun Nov 14 07:48:25 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is: false
Action string for {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: C:\Program Files\Common Files\Adobe\APE\3.1
[    4956] Sun Nov 14 07:48:26 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
Calling the custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62}
::START TIMER:: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}]
[    5276] Sun Nov 14 07:48:26 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
Extracting assets...
Extracting assets complete. Number assets: 1
CustomizedPatch property not found in database
Beginning installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Command ARKPatchCommand failed.
[    5276] Sun Nov 14 07:48:26 2010 INFO
Completing installation for payload at C:\Users\Admin\AppData\Local\Temp\Adobe\AAMUpdater\AdobeAPE3_Win64_NoLocale\3.1\Setup\pay loads\AdobeAPE3_x64-mul-230810150122\Install.db
[    5276] Sun Nov 14 07:48:26 2010 ERROR
6 Error rolling back command ARKPatchCommand
[    4956] Sun Nov 14 07:48:27 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{F9997A85-B21A-48E4-9C8A-7E1352AB1C62}] took 1024.22 miliseconds (1.02422 seconds) DTR = 3.90539 KBPS (0.00381386 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {F9997A85-B21A-48E4-9C8A-7E1352AB1C62} Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[    4956] Sun Nov 14 07:48:29 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[    4956] Sun Nov 14 07:48:29 2010 ERROR
The following payload errors were found during install:
- Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
[    4956] Sun Nov 14 07:48:29 2010 INFO
Call PostSession Custom Hook
:: END TIMER :: [Total Timer] took 7290.45 miliseconds (7.29045 seconds) DTR = 144.298 KBPS (0.140916 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 0 warning(s)
ERROR: 6 Command ARKPatchCommand failed.
ERROR: 6 Error rolling back command ARKPatchCommand
ERROR: The following payload errors were found during install:
ERROR: - Adobe Player for Embedding x64_3.1_AdobeAPE3_x64-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

As an update to my previous post about the installation failure. I chatted with Adobe Customer Service but they were unable to help and told me to call tech support - last time I did that I was unable to resolve the problem after spending about 2 hours on the phone and they are only open during the week.
I solved the problem by:
1) Deactiviating CS5 Master Collection on my computer
2) Uninstalling the software from the control panel (I did not remove the serial number as I was planning on re-installing.
3) Downloading and running the Adobe CS5 Cleanup tool.
4) Reinstalling CS5 MC.
5) Downloading and installing all of the updates to bring the install up to date.
I am glad it is working as it should but really had better things to do with the 4-5 hours this took to do. Would be nice to have a tool to fix these types of problem without having to go thru the above especially considering the price the software costs...

Photoshop CS6 installation failure dialog

I get the following Photoshop CS6 installation failure dialog box
Installation Failed
Your installation encountered errors.
A conflicting or prerelease version of Adobe Photoshop CS6 exists on this computer. The conflicting version must be removed before installing from the current media.
If the problem persists, please contact Customer Support for further assistance.
I've searched and found no reference to this in you FAQ
Are there specific files I should remover? What should I do?

first uninstall ps cs6, if it is installed.
then, run the cleaner: http://www.adobe.com/support/contact/cscleanertool.html
then reinstall.

PSE9 for Mac - Installation Failure Exit Code: 7

I get the following message when I try to install (either from disk or from downloaded trial version):
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 16 error(s), 12 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: 6952 Unable to preserve original file at "/Library/Fonts/MyriadWebPro-Italic.ttf" Error 0
ERROR: 6952 Command ARKDeleteFileCommand failed.
ERROR: The following payload errors were found during install:
ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: - Elements Camera Raw: Install failed
ERROR: - Elements 9 Organizer: Failed due to Language Pack installation failure
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Elements 9 Organizer_AdobeElements9Organizer_en_US: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - Elements Inspiration Browser: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Adobe Photoshop Elements 9_LangPacken_US: Install failed
ERROR: - Adobe Photoshop Elements 9: Failed due to Language Pack installation failure
I have tried all the suggestions that I found in other topics, but am still unable to install PSE 9.
This seems to be a problem for other users.
Is there a solution?
Thanks.
Jim

Look for this file or folder on your machine:
"<Macintosh HD>/Library/Fonts/MyriadWebPro-Italic.ttf"
Is there a folder named MyriadWebPro-Italic inside the Fonts folder? Is the file MyriadWebPro-Italic.ttf already existing within this folder?
In both the cases, delete this file/folder and try to install PSE again.
Hope this helps. Let me know.
Regards,
Ankush

Installation Failures?

I'm getting installation failures with Coldfusion 8.0.1 --
I'm assuming it's a java problem. What version of java should I be
running? I'm running the latest and greatest, yet during install
(before I get to any options), I get the following error:
This Application Has Unexpectedly Quit
Invocation of this Java Application has caused a
InvocationTargetException
Anyone have the same issue?
--- java stack trace below --
java.lang.RuntimeException: java.io.IOException: Could not
get shell folder ID list
at
sun.awt.shell.Win32ShellFolderManager2$ComInvoker.invoke(Win32ShellFolderManager2.java:50 6)
at
sun.awt.shell.Win32ShellFolder2.getFileSystemPath(Win32ShellFolder2.java:561)
at
sun.awt.shell.Win32ShellFolder2.composePathForCsidl(Win32ShellFolder2.java:211)
at
sun.awt.shell.Win32ShellFolder2.<init>(Win32ShellFolder2.java:224)
at
sun.awt.shell.Win32ShellFolderManager2.get(Win32ShellFolderManager2.java:239)
at sun.awt.shell.ShellFolder.get(ShellFolder.java:219)
at
sun.swing.WindowsPlacesBar.<init>(WindowsPlacesBar.java:64)
at
com.sun.java.swing.plaf.windows.WindowsFileChooserUI.updateUseShellFolder(WindowsFileChoo serUI.java:512)
at
com.sun.java.swing.plaf.windows.WindowsFileChooserUI.installComponents(WindowsFileChooser UI.java:194)
at
javax.swing.plaf.basic.BasicFileChooserUI.installUI(BasicFileChooserUI.java:136)
at
com.sun.java.swing.plaf.windows.WindowsFileChooserUI.installUI(WindowsFileChooserUI.java: 127)
at javax.swing.JComponent.setUI(JComponent.java:673)
at javax.swing.JFileChooser.updateUI(JFileChooser.java:1763)
at javax.swing.JFileChooser.setup(JFileChooser.java:360)
at
javax.swing.JFileChooser.<init>(JFileChooser.java:342)
at
javax.swing.JFileChooser.<init>(JFileChooser.java:301)
at
com.macromedia.ia.panel.BaseFolderChooserPanel.<init>(Unknown
Source)
at
com.macromedia.ia.panel.CFMXInstallFolderPanel.<init>(Unknown
Source)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java: 39)
at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorIm pl.java:27)
at
java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at
com.zerog.ia.installer.actions.InstallPanelAction.g(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.d(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.h(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.Main.main(DashoA8113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
Caused by: java.io.IOException: Could not get shell folder ID
list
at sun.awt.shell.Win32ShellFolder2.getFileSystemPath0(Native
Method)
at
sun.awt.shell.Win32ShellFolder2.access$900(Win32ShellFolder2.java:55)
at
sun.awt.shell.Win32ShellFolder2$8.call(Win32ShellFolder2.java:563)
at
sun.awt.shell.Win32ShellFolder2$8.call(Win32ShellFolder2.java:561)
at
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
at java.util.concurrent.FutureTask.run(FutureTask.java:138)
at
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:885)
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
at
sun.awt.shell.Win32ShellFolderManager2$ComInvoker$3.run(Win32ShellFolderManager2.java:458 )
at java.lang.Thread.run(Thread.java:619)

I'm trying to install the ColdFusion 8 30-day trial on
Windows 2003 (fully updated) server and each time, fails on
"Installing Web Connectors". IIS is installed and serving 10
websites. The installer continues to appear that it's running, but
hangs on "Installing Web Server Connectors". The Event viewer shows
"ColdFusion Application Started". If I force the install to stop,
it writes install log that "asf".
I have tried updating server, restarting, performing
uninstall. My guess is that..
A. Some type of special uninstall clean-up that needs to be
performed prior to any reinstall.
B. That some strange conflict with IIS or .NET?
After 18 installations, not yet had a problem so this is a
first and unsure how to proceed.
Thanks,
Jeff

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

How can I get around error message? "No installation on non-HFS disk:

I am trying to install CS2 on my new Mac. How do I get around the following error message? "Installation onto non-HFS disk is not supported.

Which new Mac?
Is the hard drive PCIe-based flash storage? If so, you will probably need a newer version of AI.

What's Happening?? Some days after installing latest security up date for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes.No other CD or DVD disk will mount.

What's Happening?? Some days after installing latest security update for 10.5.8 on G4, both inernal CD/DVD drives failed to mount disks other than a cleaning disk which mounted and was imported into iTunes. No other CD or DVD disk will mount.Is this a unique experience?

Hello Robert,
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Windows 8 installation failure with German language pack

Hi,
I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
Thanks in advance for your Support,
Ingo
Event-Details:
System
Provider
[ Name]
Microsoft-Windows-WindowsUpdateClient
[ Guid]
{945A8954-C147-4ACD-923F-40C45405A658}
EventID
20
Version
1
Level
2
Task
1
Opcode
13
Keywords
0x8000000000000028
TimeCreated
[ SystemTime]
2012-12-28T10:06:26.588367000Z
EventRecordID
2032
Correlation
Execution
[ ProcessID]
388
[ ThreadID]
2640
Channel
System
Computer
Lenovo-PC
Security
[ UserID]
S-1-5-18
EventData
errorCode
0x80070002
updateTitle
German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
updateGuid
{B9991A98-7903-4A91-B17A-818B1C1D9633}
updateRevisionNumber
200
serviceGuid
{9482F4B4-E343-43B6-B170-9A65BC822C77}

Hi SOL
For more information , please find the below download link.
http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
Thank you
please rate all useful information

Adobe Camera Raw 6.7 Installation Failure

From Adobe Bridge CS5, I enter Help, then Updates.
Adobe Application Manager informs me that I can update Adobe Camera Raw to 6.7.
I click to install, the software is downloaded tha I get an Installation Failure message.
When I click on 'Customer Support' on the screen, I am directed to 'http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html'.
At no point during the installation was I asked for the serial number.
Regards
Mike

Please confirm your ACR version from Help->About Plugin->Camera Raw and provide us with the following logs.
You can find them at:
ACR Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\<username>\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail. This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh
[email protected]

Acrobat X pro installation failure

I always have had problem with Acrobat installation.
Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
Here are the error messages:
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Infact, the Creative Suite is the very few first applications I installed after Windows set up.
Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.

Errors "Exit Code: 6," "Exit Code: 7"
Mylenium

10.4 Installation Failure on clean disk

Similar Messages

Maybe you are looking for