10.5.1 Firewall Settings

The firewall settings have changed in 10.5.1. I wasn't using the firewall at all, but wanted to and wanted to know which setting was the best for my meager needs. I'm just a guy with an iMac with no wireless and no network, just a direct connection via ethernet to my DSL modem. What setting would you guys recommend? "Allow All" or "Allow Essential"? And if I do Essential will that slow anything down like web browsing or anything else?

Leopard "stealth" is for squat. I just switched from a failing motorola router to the airport extreme with the extra ethernet ports in back. The moto had a firewall and a stealth button.
https://www.grc.com/x/ne.dll?bh0bkyd2 scans your computer and is quite handy.
With the moto router and no mac firewall / stealth enabled, every square was green (stealthed), I was completely invisible. Shields Up, that link, called that an uncommon and very good situation.
With the airport extreme and mac's firewall enabled for essential services and stealth selected, I've got 7 stealthed ports, and 1,048 ports reporting back to the test as closed, and none open. No change from no fire wall, no stealth in preferences/security/firewall. My computer acknowledges itself to outside probes now. Not the best state of affairs.
I don't see anywhere in the airport utility where one can enable a firewall upstream from the computer. It's nice with the AE that everything plays together easily, but as for stealth.... squatola. Anybody can see you, so use modern encryption, like a previous reply said; WPA2/WPA2-Personal.
Maybe X.5.2 will beef up the security a little. Maybe X.5.2 will fix iCal's custom repeating event no show bug too. Doubt it though.
Anyway, Mac still rules. All your bases are belong to us.

Similar Messages

How do I change my firewall settings to allow Spotify?

I get a message pop up that says.... A firewall may be blocking Spotify. Please update your firewall to allow Spotify (error 101)
Please help I am so terrible with anything other then the basics.
I found my firewall settings but I could only figure out how to turn them on and off. This did not help.
I need it explained to me in the most simpilist of ways.
Thank you

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Unable to reach Adobe servers, Please check firewall settings and try again

I have been a creative cloud customer since it started and I've never experienced such buggy software as the app manager. The customer experience is just shocking and I wish Adobe would just offer direct downloads for the software we need rather than use the app manager.
I'm currently trying to install the latest versions of the programs but the app manager keeps showing "Unable to reach Adobe servers, Please check firewall settings and try again in a few minutes".
I do not have any firewalls on my network.
I've uninstalled all previous versions of the applications.
The app manager will download a few % and then the message appears again. I click retry and it downloads another few % before showing the message again. I keep doing this until the program is fully downloaded and installed which take hours. Because I am able to eventually download the app, the error should be anything to do with my setup or internet connection as I've never had this issue before when installing adobe products.
Is there a way we can bypass the app manager and install the programs directly? This is getting very annoying and I just need my apps to install without wasting days clicking the retry button.

I'm having the exact same problem. Photoshop is stuck at 0%.
Have the links for direct download changed? When I went to http://prodesigntools.com/adobe-cc-direct-download-links.htmland then scrolled down the page to:
Photoshop CC 2014 (64-bit)
740 MB
File 2
801 MB
File 1
and then clicked on File 1 and File 2, I reached a page that says "You don't have permission to access "http://trials3.adobe.com/AdobeProducts/PHSP/15/win64/Photoshop_15_LS20_win64.7z?" on this server."

Creative Cloud is telling me "Unable to reach Adobe servers. Please check your firewall settings, and try again in a few minutes.

Creative Cloud is telling me "Unable to reach Adobe servers. Please check your firewall settings, and try again in a few minutes.
What do I do to access the cloud? I have checked my firewall settings to allow for me to be able to use adobe cloud. Any Suggestions?

Try a different browser and/or turn your firewall off to download
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How do I remove "Allow all connections" for Pando in my firewall settings?

In System Information under Firewall Settings - Applications, I see the following: com.pando.pando: Allow all connections. However, when I go to System Preferences and look at the firewall options, this is not listed, nor can I find any trace of Pando anywhere else on my computer. Is this hidden somewhere, and how can I get rid of it?

pirihi,
open Safari’s Preferences, and select its Privacy tab. For the “Block cookies and other website data” set of radio buttons, select “Never”.

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my comput

How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my computer

Something to Consider:
If you are talking about "Avast!" Security Software, either the free or the paid version, the following may apply to you:
There are three main levels of Security in the Avast! software: Home, Work, and Public
Home is the setting many people use when "at home", that is, connected to the home network. The home network is sometimes defined as the "192.168" network: these are the computers and printers that you have and use in your home environment. The network is (most usually) private and (should be) secured with with a passphrase at your router. The Avast! Software sees the "Home" network as a "safe" environment: devices connected within the "Home" network are allowed to "talk" (communicate) with one another without undue restrictions.
Work is the next setting. The software places some restrictions on this level of communication. Home users can certainly use this setting -- in many (most) cases, the "Work" setting is a solution that provides for communication and a bit more security for the home network and its devices.
Public is the strictest setting and is meant to keep your computer safe in a public place: the library, coffee shop, on a street corner. Outside "prying eyes" are prevented from peeping and outside communications are restricted.
If you have set (or left) your Avast! software set to Public, or even Work (and you do not know how to handle the restrictions), then you may have simply locked out the communication between the printer and the computer(s) on your home network.
Open your Avast! Software and set the security level to either "Home" or "Work".
You can find out more about how to use the software settings at the Avast! website.
Advanced Users Only - You will know if you changed the Rules... this is not something one does by accident.
If you have changed the rules within the settings, you may have locked yourself out. Make sure you have both "in" and "out" traffic settings adjusted correctly for each rule you change / adapt / add.
Kind Regards,
Dragon-Fur

How do I change my firewall settings?

I have an account with Active Link, and every time I try to connect, I cannot and I get a message saying: "Please adjust your firewall settings to allow ALconnect to access the Internet. If you aren't sure how to do this, please contact the support team for your firewall software for help."
So that is what I am doing. My cell phone number is XXX if it is easier to contact me by phone.
<sub>edit: removed personal information. we do not provide support via phone, please keep all communications on the public forum. (philipp)</sub>

This is an Active Link issue, not a Firefox issue.
*Active Link's help site is here - https://www.getactivelink.com/help
*Active Link's home page is here - https://www.getactivelink.com/download

How do I edit my firewall settings

How di I edit my firewall settings?

Hey there jacque,
It sounds like you would like to edit your firewall settings. I found this article for you to help you configure it named:
OS X Mountain Lion: Prevent unwanted connections with a firewall
http://support.apple.com/kb/PH11309
Turn on firewall protection
Choose Apple menu > System Preferences, click Security & Privacy, and then click Firewall.
Click the lock icon to unlock it, and then type an administrator name and password.
Click Turn On Firewall.
Allow only specified apps and services to connect
Choose Apple menu > System Preferences, click Security & Privacy, and then click Firewall.
Click the lock icon to unlock it, and then type an administrator name and password.
Click Firewall Options.
Click Add (+), and then select the app or service in the dialog that appears.
Allow only essential apps and services to connect
Choose Apple menu > System Preferences, click Security & Privacy, and then click Firewall.
Click the lock icon to unlock it, and then type an administrator name and password.
Click Firewall Options.
Select the “Block all incoming connections” checkbox.
Allow signed software to receive incoming connections
Choose Apple menu > System Preferences, click Security & Privacy, and then click Firewall.
Click the lock icon to unlock it, and then type an administrator name and password.
Click Firewall Options.
Select the “Automatically allow signed software to receive incoming connections” checkbox.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.

Preview failed because Adobe Muse could not make a connection over HTTP. The most common cause of this is Firewall software which prevents HTTP connections. You may need to change Firewall settings to allow Adobe Muse to make connections.
no firewall at all, in win 8.1, turned it off for all networks
ftp and publish works just fine

Hi,
Please take a look at this post : Re: Adobe Muse - Preview Failed
Regards,
Aish

My adobe cloud desktop app seems to have stopped working. I keep getting a error message saying Unable to reach adobe servers, please check firewall settings.

My adobe cloud desktop app seems to have stopped working. I keep getting a error message saying Unable to reach adobe servers, please check firewall settings.
The creative cloud icon on the top menu bar is greyed out, and not updates show.
I have spoke to our internal IT and my settings are the same as my colleagues who's is working fine, can anybody help with this ongoing problem?

Grafix121 please ask your I.T. department to review the Adobe Creative Cloud Security FAQ for IT section of Creative Suite Enterprise Deployment | Adobe Developer Connection for information on how to configure your network to allow connections to the Adobe servers.

Fix for "your computer's system firewall settings will prevent you...?"

I finally did the dreaded feat and performed an update - had all kinds of problems afterwards (repeating Network settings message error, unknown error -3256 error, etc.) that I have (I think) successfully fixed thanks to these fabulous forums. After getting the -3256 error I updated the firmware and software for my AE and applied the Apple support fix for -3256. Then I started getting a new issue - being the following message after opening my new i-tunes version 8.0.2 "your computer's system firewall settings will prevent you from using Airtunes". After going into the firewall settings and trying to modify the port number (which I found suggested here) that i-tunes would use to stream to my airport express in the edit pane for 'i-tunes music sharing'. I ended up creating a new port specification, which I called i-tunes 1 with ports 5000 - 6000 specified. Tried opening i-tunes again - but no luck, same error. Thinking that I'd done nothing to improve the situation, I deleted my new port specification in the allow pane under firewall - I noticed that the original spec was gone (because I had edited it?). Anyway, as soon as I deleted the spec that I had edited, airtunes started working beautifully! To check things - I closed i-tunes and re-started, then, got the same message ""your computer's system firewall settings will prevent you from using Airtunes" with the option to check my firewall settings - which I did. This time, I noticed that 'i-tunes music streaming' was again listed as an option under allow in my firewall. I selected and deleted it - then again, my Airtunes works perfectly.
I really have no idea what exactly occurs 'behind the scenes' so to speak when you delete this from the list - but - it seems to have fixed my problem. I'm guessing that I'll have to do that each time I open i-tunes. At least I got my airtunes back. I guess I'm a little worried that deleting this item presents some sort of risk or could lead to another problem and so if anyone can comment on this I would really appreciate it. Alternatively, if anyone has a solution that won't require me deleting this item each time I open i-tunes, I'd be glad to hear it.
Thanks!
Leigh-Ann

Leigh-Ann, you didn't say that Airtunes didn't work, only that you got that error. I, too, am getting the "Your computer's system firewall settings will prevent you from using Airtunes" message, but when I click "Ignore" I find that Airtunes works just fine.

It's not letting me change the firewall settings.

I have a odd problem. It's not letting me change my firewall settings. The settings are locked by default, when I click on the little lock image in the bottom it does not prompt me for the password, it says "authenticating" for about 2 seconds, and then the "Click the lock to make changed" text appears again. I don't know what to do...

I only have one account and I don't know how I could log into it more than once at the same time...
My signature is not correct... I have the latest 10.6.1.
Would it be possible to change the firewall settings in terminal?

How to change the firewall settings to provide remorte access to oracle 10g

dear all
I have created the oracle 10g database and it is working properly...but I cant loging with thedata base remotely when the host's firewall is on..when it is off I can connect with the database remotely..how can I change the firewall settings in this case

You need to configure your firewall to allow traffic on the ports listed in ORACLE_HOME\install\portlist.ini.
You do not need to allow all of the ports, just the ports you want to allow traffic. For example if you are not using iSQL Plus you do not have to open port 5560 or the range 5560–5579.
You can find a description of the ports at the following link.
http://download-east.oracle.com/docs/cd/B19306_01/install.102/b14316/ports.htm#CIHECDEE

Update downloads fail, initial app installs work fine, Windows 8.1, internet connection and firewall settings fine

I just installed the CS6/CC applications I use without any issue. I then was prompted to install various updates. All the updates failed and the message says the downloads failed. I checked my internet and firewall settings and they are fine. I the was able to install a different CC application I hadn't installed before. That process worked fine so I retried all the updates. They all failed again and for the same reason. I have even tried a cold system reboot. Nothing works. I am really baffled.
Has anyone run into this and, if so, were you able to figure it out.

pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

Your computer systems firewall settings will prevent you from using AirTune

I haven't used my airport express in a while and I just opened itunes with my airport speakers and I got the error message Your computer systems firewall settings will prevent you from using AirTunes. How can I fix this?
Help!!

I have this same exact problem and it is driving me crazy. I am running on OS X 10.4.11 and only started having this problem when I started using the express to join another network. I had always used it as the base but when I joined the wireless network I created with an airport extreme (just bought it a couple of days ago) I can still use the internet fine, and I can print wirelessly, but when I try to use the speakers wirelessly from iTunes it gives me that warning. I'ce tried opening up a whole bunch of ports on my computer but I have no clue how to correct whatever else needs correcting on the extreme.
APPLE! We need your help!

10.5.1 Firewall Settings

Similar Messages

Maybe you are looking for