10.5.2 and Kernal Task

Since installing 10.5.2 on my MacBookPro yesterday, Activity Monitor shows a Kernal Task running constantly, using about 4% of CPU, with an rsize of 60MB and virtual memory of 1.09GB. It soounds like the hard disk is also working overtime. This has been going on for about 15 hours.
Any idea what this is?

kdb1, do you use FileVault? I'm wondering if the kernal task has something to do with FileVault.

Similar Messages

Finder and Kernal tasks using all my Ram

My computer is super slow now, even switching from one folder to another in Finder often takes 3 or 4 seconds. I'm pasting a screen shot from Activity Monitor and the data from an 'etre-check' software scan. Any help much appreciated!!
Hardware Information:
          iMac (24-inch Mid 2007)
          iMac - model: iMac7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          ATI,RadeonHD2600 - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C64) - Uptime: 20 days 16:54:57
Disk Information:
          Hitachi HDS721010KLA330 disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Jaguar (disk0s2) / [Startup]: 999.35 GB (877.63 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Generic Flash Card Reader/Writer
Apple Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.symantec.kext.internetSecurity          (1.3.2f5)
          com.symantec.kext.ips          (3.2f8)
Launch Daemons:
          [System]          com.adobe.fpsaud.plist 3rd-Party support link
          [System]          com.barebones.textwrangler.plist 3rd-Party support link
          [System]          com.google.keystone.daemon.plist 3rd-Party support link
          [System]          com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [System]          com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System]          com.symantec.avscandaemon.plist 3rd-Party support link
          [System]          com.symantec.deepsight-extractor.plist 3rd-Party support link
          [System]          com.symantec.diskMountNotify.plist 3rd-Party support link
          [System]          com.symantec.MissedTasks.plist 3rd-Party support link
          [System]          com.symantec.navapd.plist 3rd-Party support link
          [System]          com.symantec.navapdaemonsl.plist 3rd-Party support link
          [System]          com.symantec.Sched501-1.plist 3rd-Party support link
          [System]          com.symantec.sharedsettings.plist 3rd-Party support link
          [System]          com.symantec.symdaemon.plist 3rd-Party support link
          [System]          com.symantec.symSchedDaemon.plist 3rd-Party support link
Launch Agents:
          [System]          com.divx.dms.agent.plist 3rd-Party support link
          [System]          com.divx.update.agent.plist 3rd-Party support link
          [System]          com.google.keystone.agent.plist 3rd-Party support link
          [System]          com.oracle.java.Java-Updater.plist 3rd-Party support link
          [System]          com.symantec.uiagent.application.plist 3rd-Party support link
User Launch Agents:
          [not loaded]          com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded]          com.amazon.cloud-player.plist 3rd-Party support link
          [not loaded]          com.hp.printerAgent.plist 3rd-Party support link
User Login Items:
          smcFanControl
          iTunesHelper
          ExpanderDaemon
          EEventManager
          EpsonRegReminder
          Dropbox
          Notes
          EEventManager
          ConnectService
          SymSecondaryLaunch
Internet Plug-ins:
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          DivX Web Player: Version: 3.1.1.9 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 9.5.5 3rd-Party support link
          ebrary Reader: Version: 2.22 - 1/26/10 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          AmazonMP3DownloaderPlugin1017265: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
          RealPlayer Plugin: Version: (null) 3rd-Party support link
          DirectorShockwave: Version: 11.5.1r601 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          GarminGpsControl: Version: 2.9.3.0 Release 3rd-Party support link
          AmazonMP3DownloaderPlugin: Version: AmazonMP3DownloaderPlugin 1.0.17 3rd-Party support link
          Mozillaplug: Version: 1.0
          Silverlight: Version: 5.0.61118.0 - SDK 10.6 3rd-Party support link
          OVSHelper: Version: 1.1 3rd-Party support link
          Google Earth Web Plug-in: Version: 7.0 3rd-Party support link
          FolxNetscapePlugIn: Version: Unknown
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
          OfficeLiveBrowserPlugin: Version: 12.2.7 3rd-Party support link
Safari Extensions:
          Folx Safari Extension: Version: 1.0
          Add To Amazon Wish List: Version: 1.5
          AdBlock: Version: 2.6.18
          Translate: Version: 1.1
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          FolxNetscapePlugIn: Version: Unknown
3rd Party Preference Panes:
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
          Java 3rd-Party support link
          Norton\nQuickMenu 3rd-Party support link
          Perian 3rd-Party support link
          Xmarks for Safari 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Library/Application Support/DivX
                    DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    DivXMediaServer:          Version: 10.1 - SDK 10.5 3rd-Party support link
                    DivXTransferWizard:          Version: 10.1.1 (Build 10.1.1.44) - SDK 10.5 3rd-Party support link
                    DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Wondershare Helper Compact:          Version: 2.2.6.4 - SDK 10.5 3rd-Party support link
                    /Users/[redacted]/Library/Application Support/Helper/Wondershare Helper Compact.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          H&R Block 2013:          Version: 1.2 - SDK 10.5 3rd-Party support link
          DivX Converter:          Version: 10.1.1 (Build 10.1.1.67) - SDK 10.5 3rd-Party support link
          iSkysoft DVD Ripper:          Version: 2.5.2 - SDK 10.5 3rd-Party support link
          DivX Player:          Version: 10.1.1 (Build 11.3.1.8) - SDK 10.5 3rd-Party support link
          H&R Block 2011:          Version: 1.4 - SDK 10.4 3rd-Party support link
          H&R Block 2012:          Version: 1.10 - SDK 10.5 3rd-Party support link
          CandyBar:          Version: 3.3.2 - SDK 10.5 3rd-Party support link
          EasyFind:          Version: 4.9 - SDK 10.5 3rd-Party support link
          Google Update Uninstaller:          Version: 1.0 - SDK 10.0 3rd-Party support link
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Jaguar: Disk size: 930.71 GB Disk used: 113.36 GB
          Destinations:
                    Mercury Pro 2 [Local]
                    Total size: 2
                    Total number of backups: 27
                    Oldest backup: 2013-06-11 20:21:42 +0000
                    Last backup: 2014-03-23 02:45:55 +0000
                    Size of backup disk: Adequate
                              Backup size 2 > (Disk used 113.36 GB X 3)
                    TM 3TB [Local] (Last used)
                    Total size: 3
                    Total number of backups: 33
                    Oldest backup: 2013-06-11 20:21:42 +0000
                    Last backup: 2014-03-28 02:40:57 +0000
                    Size of backup disk: Excellent
                              Backup size 3 > (Disk size 930.71 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               6%          Google Chrome
               4%          WindowServer
               3%          EtreCheck
               1%          fontd
               0%          ConnectService
Top Processes by Memory:
          725 MB          Finder
          110 MB          Google Chrome
          98 MB          Microsoft Word
          86 MB          systemstats
          86 MB          WindowServer
Virtual Memory Information:
          405 MB          Free RAM
          1.43 GB          Active RAM
          894 MB          Inactive RAM
          568 MB          Wired RAM
          314.25 GB          Page-ins
          2.52 GB          Page-outs

Your RAM looks OK now. At some point over the past 20 days you we doing something that needed more than your 4 GB of RAM. Do you know what that might have been?
I suggest removing that antivirus and rebooting.

Kernal task 100% constantly

Unibody 17" MBP 266mhz. Got my new MBP this week. Have posted on MacBook boards but haven't gotten a resolution yet. Sorry for posting here but I need this resolved. When I boot my MBP which takes about 4-6 mins. I go to Activity monitor and kernal tasks gives me a reading of at least 100%. This is even without opening any app. I looked in console and didn't see any errors. I am running presently in better performance, but it happens in the other mode also. If I boot in safe mode activity monitor is fine, looks normal. I did a reinstall but that didn't work. I ran TechTool pro and it didn't come up with any errors. I don't know what else to do
Forgot to mention I did a migration from old intel MBP
Message was edited by: Tony Brave

I'm not seeing anything, besides kernal_task, that is out of the ordinary.
Spotlight will show a dot in the center of the magnifying glass in your toolbar. If you click the magnifying glass, it will display information about how far along in the indexing process (if it is indeed indexing. If it isn't indexing, it will only display the search field)
I posited bad RAM because that might cause issues. I doubt it though. How large is your internal drive? At this point, I feel it has something to do with a bad migration. I would try to add a 2nd partition to your boot drive and do a clean install of Leopard on it (minimum install, you don't need to install printers, etc.) If your drive is large enough (at least 15 GB free), launch Disk Utility and select your boot disk (not volume, the boot disk will have some numbers beside it and not Macintosh HD.) Next click on the Partition Tab. On the left side of the Partition tab there is a graphic for the Volume Scheme, click on the little '+' sign on the lower left. You can drag the slider in the middle of the graphic to size the 2nd partition. Click Apply. Proceed to install OS X from your install disks to this 2nd partition. If the system performs normally on this 2nd partition, we know your primary OS has something in it that is causing problems. If it behaves the same as the primary, we probably have a hardware issue (I doubt this.) If the 2nd system works properly, I would get an external hard drive, clone your boot drive to the external using either Carbon Copy Cloner or Super Duper! (Boot the external clone to make sure it works) Re-partition and Erase your internal drive and do a clean install on your internal. You can then try to migrate your settings from the external at this point.
Let me know...
D.

Kernal Task is increasing and it's decreasing my FREE RAM

Hi...
I've been noticing my RAM decreasing faster than before I installed the OS update to 10.4.9. I was looking at the Activity Monitor. I saw that the Kernal_Task activity is tremendously higher than the rest of the "Process Name." Is that normal? Also, when I launch any application, the Kernal-task increases even more and it doesn't decrease when I quit an application. Is that normal, too? My total RAM is 4.5 gigs.
Leigh-Anne

Hi
Read this about Kernal_Task:
http://forums.macosxhints.com/showpost.php?s=44f073c6e35c2c7f4958f7972e6f26b8&p= 183614&postcount=2
Steve

Kernal-Task up to 300%

HI , This is aamir , i am running a macbookpro 13" corei5 early 2011
i am having a issue form last 20 days , that kernal-task boost up to 300%
i changed OS up to 10.7 lion but with same result , my laptop is not working
normally , speed is slow , fan speed is fast , i changed Ram , Hard disk but
still same problem , i also reset the SMC but no result .pls tell me that
where is the problem and how i got fix it ,
Thanks

Sounds like a runaway process from a program you installed, log in item etc. a software issue you restored back with that's corrupt.
Looks like you'll need a Fresh install.
Go through this, should help immensly.
https://discussions.apple.com/docs/DOC-3291
https://discussions.apple.com/docs/DOC-3046

What is a kernal task ?

In my activitiy monitor, it is showing a kernal task showing a static 84.32mb real memory and 951.51 mb virtual memory being used. Like I said, the memory usage numbers are static.
What is this, and is it normal?

kernel_task is the core, the heart, the nub, the gist, ... the kernel of the operating system. Yes, it is normal.

I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continues to blink on and off. I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated

I am trying to download a variety of files and when it is finished, the Mac freezes up and the task bar continue to blink on and off.
I have to go into Firefox and actually quit the application to continue. Any help is very much appreciated.

are you backing up files, or doing a Time machine backup, either way, the Time machine will STOP when finished and show "last backup at XXXXXX" meaning its done...... OR if when transferring files, it will show a progress bar on your desktop and vanish when files are copied.
Open up the Hitachi drive (your G drive is made by Hitachi, and the best made by the way).....and see if the files are there.
a MORE VISUAL way is to open the hard drive file, and drag and drop files INTO the Gdrive and you can see them visually be copied there as you do it.
To see your HD on your desktop GOTO FINDER......PREFERENCES....then GENERAL TAB.........check the box marked HARD DRIVES.........then your Gdrive will appear on your desktop........open it from there, and DRAG and drop files from anywhere INTO the Gdrive....... easy visual way to see the files being copied into the Gdrive.

Email Notifications for both UWL Tasks and Collaboration Tasks.

Hello,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
Could any one please give me the configuration steps.
Thanks in Advance.
Regards,
Sridhar.

Hi sri,
Refer the following threads
https://www.sdn.sap.com/irj/scn/thread?threadID=147316
https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
Regards,
P.Manivannan

Email Notifications for UWL Tasks and Collaboration Tasks

Hi,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
I done with the all the Configurations suggested in the below link:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e]
But Email Notifications are not reaching the users Lotus Mail ID. Could any one please suggest me that i am missing any Configurations.
Thanks in Advance.
Regards,
Sridhar.

Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert

Create entity and human task

Hello,
I have a really simple process which includes a create entity activity. It works perfectly fine as data is inserted into the table and i can see everything is completed in the flow trace. Now, when i insert a human task after the create entity activity, things start going wrong. While i don't see any errors in the flow trace and all tasks are completed as planned, the BPEL component's state is showing as running and at the end of the flow i got the message "The transaction was rolled back. The work performed for bpel instance "123456" was rolled back to the previous dehydration point, but the audit trail has been saved...." It seems like it's waiting for something from the human task (even though it was completed successfully). As long as I leave this running, the process would try everyday from 12:00 AM to 4:00 AM every five minutes. That's another issue that i can't figure out. Can someone shed some light on this? Thank you.

Hi,
its best to post this question to the SOA forum. The answer on this forum would be to use a page template, a parametrized bounded task flow and then add the bounded task flow to each page that has the template. However, the task flow in the HT case is generated, which means that you re-build it all the time (meaning you don't work with the same task flow but multiple). If you know how to just use the HT API to access the information to display, you could write a generic bounded task flow for this. Check on the SOA forum if they can come up with a template approach for your use case.
Frank

Multiple Convert/Dump and Load tasks in a single SSIS package?

I'd appreciate some input. We have a single data file that has about 1,000,000 rows of data spanning 28 time periods in the columns across each row. The file is too large to import at one time, and so we have created 9 different transformation files to pull subsets of the timeperiods using MVAL. The end user does not want to have to break apart the file and/or schedule 9 separate imports to bring this file in each time. So, I've attempted to create a single SSIS package that runs each of the 9 required component imports, but I'm running into the following error any time that I try to run more than one import at once:
An error occurred while running a packageException of type 'System.OutOfMemoryException' was thrown.
I've tried using a ForEach loop to simply loop through each of the transformation files and run an import for each transformation file it finds. But, I understand that SSIS doesn't release memory until the end of the ForEach loop, which would explain an out of memory issue. I then broke it out and specified 9 distinct Convert task and 9 distinct Dump and Load tasks in the package with an order of Convert 1 --> Dump and Load 1 --> Convert 2 --> Dump and Load 2, etc. This results in the same out of memory issue any time I enable it to run more than 1 convert/dump & load task in the package - they are not running simultaneously, but rather sequentially. I don't understand this. In looking at the logs, it looks like it's creating the temp files for the first import and adding them into BPC, and then creating the temp files for the second import but then fails prior to the second load. This will work for a smaller data file, but shouldn't the memory be released after the task and allow subsequent tasks to complete? Any recommendations on how to address this and automate this load?

Quick update - I created unique ssis packages for the distinct imports and called those packages from within the initial package that is kicked off through Data Manager, and I ran into the same out of memory issue. Any ideas, suggestions, or help would be greatly appreciated.
Thanks!
Josh

How to distinguish between enabled and disabled tasks in SSDT-BI 2012

Hi,
I've got SSDT-BI 2012 together with VS2012 installed. Simple questions: What is the difference between enabled and disabled tasks in control flow from the design/color point of view? I do see that the disabled tasks changes to grey (omg are you really kidding
me????) from black. This could be a bad joke or dream however is not.
So I'm kindly asking you to help me solve this problem. How can I change the color difference between these two options (enabled task vs disabled task)? I do not care whether the one will be yellow or pink, simply just need to be recognizable at first
look and not under long and painful examination.
Thanks for your reply. Hopefully it will be useful.
Karol.

Hi Karol,
It’s true that it only changes the font color of the task name text to grey after disabling a task in SSDT 2012. In SSDT 2010, the whole task control including icon will turn grey after it is disabled; in BIDS, the background color of the task control will
turn grey after it is disabled. These behaviors are by design. Personally, I agree with you that this behavior in SSDT 2012 is not very readable.
If you have concerns, I would suggest you submitting a wish at
https://connect.microsoft.com/sql.
Connect site is a connection point between you and Microsoft, and ultimately the larger community. Your feedback enables Microsoft to make software and services the best that they can be, and you can learn about and contribute to exciting projects.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

BI Applications 7.9.6.1 - Few SIL and PLP Tasks stopped in Full data load

Hi All,
I have run full data load for Projects analytics. I have 23 tasks with status "stopped". These are SIL and PLP tasks for Project Facts load. It also contains tasks related to employee dimension and user dimension SCD update
I have checked the staging tables for many of the Facts/Dimensions corresponding to the stopped tasks and they have data.
All my other dimensions have loaded successfully and am able to query them from Answers using the BIA subject areas.
Could any one suggest possible reason for the tasks to be stopped.
Any pointers will be great at this point in time.
Many Thanks,
Kiran
Edited by: Kiran Kudumbur on Nov 30, 2009 4:25 PM

Thanks for that pointer!
Yes I had overlooked one failed task. It was a group task on employee dimension (Index creation on DS table had an error). Fixed that error and ran the failed and stopped tasks again. All working fine now.
Facts have been loaded and dashboards are working pretty fine.
Thanks,
Kiran
Edited by: Kiran Kudumbur on Dec 1, 2009 12:54 PM

Several DAQmx Channels with Start and Clear Task VI's

Hi,
I'm trying to read in several DAQmx channels in a while loop. When I just place the channels within the while loop and connect them directly to the read VI's, everything is fine. But I read in the help, that this will slow down my system, because it's opening and closing the task each cycle. So I used Start Task and Clear Task VI's to open and clear them before and after the loop. But now it's only reading one of my channels in, although I wired all of them in exactly the same manner. Anyone has an idea, what I did wrong?
Thanks,
Miclas
Attachments:
Save&Stop DAQ.JPG ‏87 KB

You would have seen the error if you had wired up and error indicator.
You cannot run multiple tasks of the same type (i.e. an analog input) at the same time. What you read about stopping and closing tasks is correct but it was the only way your program could work. What you don't realize is that you can have multiple channels with a single task. If you used a physical channel constant, it would be something like 'dev1/ai0:2' if you had consecutive channels or 'dev1/ai0, dev1/ai2' for non-consecutive. Global channels are done in a similar fashion. You would have 'FSR1, FSR2, Knee Angle', etc.

SharePoint's role and its task assignment

SharePoint's role and its task assignment list below:
*Workflow
*App
*PowerShell
*SharePoint migrering
*Enterprise Content Managment
*Business Intelligence
*social business platform
*SharePoint analyst
*SharePoint Enterprise Search
*Document management
*SharePoint Cloud
*SharePoint BDC (Business Data Catalog)
What more am I missing that is important to add?
Please remember that I'm a newbie in SharePoint 2013.

I understand you have added ECM but I would also add Records Management, Machine Translation Service and Community Sites.
If you want to add features then you should also include Office Web Apps, Cross Browser Support and Responsive Web Design.
Amit

10.5.2 and Kernal Task

Similar Messages

Maybe you are looking for