10.5.2 and Windows 2003 Domain and Home Folders

Hello,
This has probably been beaten to death but cant seem to find the answer that I'm looking for.
I can add the mac to the 2003 domain fine with no problems and can get the user authentication fine, access to the network shares and printers.
The question that I had was is there a way to have the mac user's home folder map directly to the user share off the server like you would on a windows side?(ie like the roaming profile)
I have tried all the options for the home folder setup under the directory access utility but it only mounts the share as a share and you have to manually copy over data if you want it to save on the server. Or is there some way to synchronize it when you log off?
Message was edited by: T Poulter

actually don't need to know now. customer only wanted entourage to connect to exchange, found out after getting more details

Similar Messages

10.4 and Windows 2003 Domain

Hello,
We're a 40% Mac environment where all the Macs are bound to our domain and users log in with Mobile accounts. When we first decided to do this, all the Macs played very nicely with our Windows 2000 domain.
About three months ago, we upgraded our Windows 2000 domain to a Windows 2003 domain and began enforcing stronger password security. Now all of the Mobile accounts on all of our 10.4 machines refuse to let the users change their passwords. Doing so through the Log In window when a password expires does not work. Neither do the controls in System Preferences/Accounts. Neither do the controls in the Kerberos app. It sits and pinwheels for a few minutes, then returns an error about not being able to change the user's password to the password specified.
I tried adding myself to a few of these computers as a Mobile user and then changing my password, but that didn't work either. So it isn't something held over in the user accounts from the old domain, and it isn't a permissions thing since I'm an administrator on the domain.
I've dumped all the Directory Access preferences files. Doesn't help.
Sometimes this behavior can be fixed by unbinding a machine from the domain, deleting the computer's account in Active Directory, then rebinding it to the domain. Lately, that fix has stopped working, and if I remove a machine from the domain, I cannot rebind it to the domain unless I do so using a different computer name - even though the computer account in Active Directory has been deleted.
Mobile accounts on all of our 10.5 machines can change their passwords without a problem.
I'm stumped. Anybody got any brilliant ideas? Information on Macs interacting with Windows domains is pretty scarce.

Hi Scott, and a warm welcome to the forums!
What Workgroup do you have set on the Mac in Directory Access Utility?
See if these 2 links help also...
http://www.macosxhints.com/article.php?story=20050302023720578
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x

WIndows 7 and Windows 2008 authentication failed in Windows 2003 Domain

Hi,
We have Domain with Windows 2003 and recently Windows 2008 Doamin controllers also added.
We are facing authentication failure for Windows 7 and Windows 2008 Domain members when user is trying to login.
Schema Master is on Windows 2003 and remaining roles on Windows 2008 Domain controller.
Windows XP clients login is working fine.
Problem si for Windows 7 and Windows 2008 Domain members login.
Any hint/solution will be really great help.
Pls share if you have any solutions.
Regards:Mahesh

Hi,
I found some more details about issue
Below are the events getting generated. It looks like due to encryption mismatch with Windows 2003 Domain and Windows7 and Windows 2008 clients. However i am looking for solution if someone tested this case.
Event Type:        Error
Event Source:    KDC
Event Category:                None
Event ID:              26
Date:                     08/06/2014
Time:                     9:41:04 AM
User:                     N/A
Computer:          AAAAAA
Description:
While processing an AS request for target service krbtgt, the account ADDADA$ did not have a suitable key for generating a Kerberos ticket (the missing key has an ID of 2). The requested etypes were 17. The accounts
available etypes were 23 -133 -128 3 -140.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Event Type:        Error
Event Source:    Kerberos
Event Category:                None
Event ID:              4
Date:                     08/06/2014
Time:                     9:34:17 AM
User:                     N/A
Computer:          AAAAAA
Description:
The kerberos client received a KRB_AP_ERR_MODIFIED error from the server ADADDFHDHDH$. The target name used was . This indicates that the password used to encrypt the kerberos service ticket is different than that on the
target server. Commonly, this is due to identically named machine accounts in the target realm (DOMAINNAME.COM), and the client realm.   Please contact your system administrator.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Regards:Mahesh

Logon failure after upgrade Windows 2003 domain functional level and schema

Before upgrade:
Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: Authentication: Windows AD
Logon OK.
After Upgrade:
Windows 2003 Std + Windows 2008: Domain functional level 2003, Schema verion 44
Crystal Report XI R2: Authentication: Windows AD
Logon Error: An error has occurred: java.lan.NullPointerException
Is it a Tomcat problem? OR Java runtime problem? OR XI R2 problem?
Anyone can help to fix it!? Thanks!!

OK, I try again in the testing lab and simplify the combination. We only consider Windows 2003 ONLY.
Before AD upgrade:
AD/Domain Controller: Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Upgrade cmbination 1
Step 1:
Upgrade Domain controller: Windows 2003 to Windows 2003 R2 (Domain functional level 2000, Schema verion 31 )
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Step 2:
Upgrade Domain Functional Level: Windows 2003 R2 (Domain functional level 2003, Schema verion 31)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
Upgrade combination 2
Direct upgrade Domain Functional Level: Windows 2003 (Domain functional level 2003, Schema verion 30)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
In this testing, we can conclude that the Domain Functional Level upgrade from 2000 to 2003. The MI logon will fail.
Q1. Crystal Report XI R2 cannot run on Windows 2003 server (Domain Functional Level: 2003)?
Q2. If Crystal Report XI R2 can run on Domain Functional Leve: 2003, how to fix our problem?
Do you have any idea to help us? Thanks!
Edited by: Initiator on Jul 20, 2010 6:22 AM

Problems with Windows 2003, JRun and Java 1.4.2_07

Hi!
I have installed JRun 4 with J2SE 1.4.2_07 on a Windows 2003 Server and all goes well until someone install a system patch, Office. After that JRun doesn�t star. The logs says:
Starting Macromedia JRun 4 (Build 84683), admin server
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77F46A07
Function=RtlFreeHeap+0x322
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
     at java.util.zip.ZipFile.getEntry(Native Method)
     at java.util.zip.ZipFile.getEntry(ZipFile.java:146)
     - locked <0x10a83218> (a java.util.jar.JarFile)
     at java.util.jar.JarFile.getEntry(JarFile.java:194)
     at java.util.jar.JarFile.getJarEntry(JarFile.java:181)
     at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:671)
     at sun.misc.URLClassPath.getResource(URLClassPath.java:160)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:191)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
     - locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
     - locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
     - locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
     at java.lang.Class.getDeclaredConstructors0(Native Method)
     at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
     at java.lang.Class.getConstructor0(Class.java:1930)
     at java.lang.Class.getConstructor(Class.java:1027)
     at com.sun.management.jmx.MetaData.findConstructor(MetaData.java:256)
     at com.sun.management.jmx.MBeanServerImpl.internal_instantiate(MBeanServerImpl.java:2111)
     at com.sun.management.jmx.MBeanServerImpl.instantiate(MBeanServerImpl.java:152)
     at jrunx.kernel.ConfigurableServicePartition.loadAndInit(ConfigurableServicePartition.java:127)
     at jrunx.kernel.ConfigurableServicePartition.loadChildren(ConfigurableServicePartition.java:89)
     at jrunx.kernel.ConfigurableServicePartition.setChildElements(ConfigurableServicePartition.java:60)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1628)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at jrunx.kernel.ServiceAdapter.invokeMethod(ServiceAdapter.java:705)
     at jrunx.kernel.JRunServiceDeployer.loadMBeans(JRunServiceDeployer.java:179)
     at jrunx.kernel.JRunServiceDeployer.deployServices(JRunServiceDeployer.java:85)
     at jrunx.kernel.DeploymentService.loadServices(DeploymentService.java:46)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1628)
     at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
     at jrunx.kernel.JRun.startServer(JRun.java:575)
     at jrunx.kernel.JRun.<init>(JRun.java:493)
     at jrunx.kernel.JRun$1.run(JRun.java:346)
     at java.security.AccessController.doPrivileged(Native Method)
     at jrunx.kernel.JRun.start(JRun.java:343)
     at jrunx.kernel.JRun.startByNTService(JRun.java:427)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at jrunx.kernel.JRun.invoke(JRun.java:180)
     at jrunx.kernel.JRun.main(JRun.java:168)
Dynamic libraries:
0x00400000 - 0x00410000      C:\JRun4\bin\jrun.exe
0x77F40000 - 0x77FFA000      C:\WINDOWS\system32\ntdll.dll
0x77E40000 - 0x77F34000      C:\WINDOWS\system32\kernel32.dll
0x77DA0000 - 0x77E30000      C:\WINDOWS\system32\ADVAPI32.dll
0x77C50000 - 0x77CF5000      C:\WINDOWS\system32\RPCRT4.dll
0x77BA0000 - 0x77BF4000      C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000      C:\Java\j2sdk1.4.2_07\jre\bin\client\jvm.dll
0x77D00000 - 0x77D8F000      C:\WINDOWS\system32\USER32.dll
0x77C00000 - 0x77C44000      C:\WINDOWS\system32\GDI32.dll
0x76AA0000 - 0x76ACC000      C:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000      C:\Java\j2sdk1.4.2_07\jre\bin\hpi.dll
0x76F50000 - 0x76F63000      C:\WINDOWS\system32\Secur32.dll
0x003F0000 - 0x003FE000      C:\Java\j2sdk1.4.2_07\jre\bin\verify.dll
0x005F0000 - 0x00609000      C:\Java\j2sdk1.4.2_07\jre\bin\java.dll
0x00610000 - 0x0061D000      C:\Java\j2sdk1.4.2_07\jre\bin\zip.dll
0x006E0000 - 0x006EF000      C:\Java\j2sdk1.4.2_07\jre\bin\net.dll
0x71C00000 - 0x71C18000      C:\WINDOWS\system32\WS2_32.dll
0x71BF0000 - 0x71BF8000      C:\WINDOWS\system32\WS2HELP.dll
0x71B20000 - 0x71B63000      C:\WINDOWS\System32\mswsock.dll
0x76ED0000 - 0x76EF7000      C:\WINDOWS\system32\DNSAPI.dll
0x76F70000 - 0x76F77000      C:\WINDOWS\System32\winrnr.dll
0x76F10000 - 0x76F3F000      C:\WINDOWS\system32\WLDAP32.dll
0x76F80000 - 0x76F85000      C:\WINDOWS\system32\rasadhlp.dll
0x03230000 - 0x0323C000      C:\JRun4\bin\portscan.dll
0x71AE0000 - 0x71AE8000      C:\WINDOWS\System32\wshtcpip.dll
0x76C10000 - 0x76C38000      C:\WINDOWS\system32\imagehlp.dll
0x6D580000 - 0x6D621000      C:\WINDOWS\system32\dbghelp.dll
0x77B90000 - 0x77B98000      C:\WINDOWS\system32\VERSION.dll
0x76B70000 - 0x76B7B000      C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 2304K, used 1312K [0x10010000, 0x10280000, 0x109e0000)
eden space 2112K, 56% used [0x10010000, 0x1013a8d0, 0x10220000)
from space 192K, 61% used [0x10250000, 0x1026d958, 0x10280000)
to space 192K, 0% used [0x10220000, 0x10220000, 0x10250000)
tenured generation total 30272K, used 1139K [0x109e0000, 0x12770000, 0x18010000)
the space 30272K, 3% used [0x109e0000, 0x10afce80, 0x10afd000, 0x12770000)
compacting perm gen total 4864K, used 4680K [0x18010000, 0x184d0000, 0x1c010000)
the space 4864K, 96% used [0x18010000, 0x184a2348, 0x184a2400, 0x184d0000)
Local Time = Wed Feb 09 10:43:31 2005
Elapsed Time = 3
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_07-b05 mixed mode)
# An error report file has been saved as hs_err_pid1712.log.
# Please refer to the file for further information.
Can someone help me. Thanx and sorry about my english.
Manu

It crashed 3 seconds after it is running. Should be reading some jar file.
Could be a something corrupted a zip file or something. Can you still do a java -version? You may want to try reinstalling 1.4.2_07

Oracle 9i and windows 2003 R2 installation issues

Hi All,
I have a windows 2003 R2 server with oracle 9.2.0.8 installed both OS and DB are 32bit. The server has 12gb ram and I therefore use AWE and /PAE, however when ever the number of connections exceeds >60 memory errors start to appear and sessions crash. Has anyone out there carried out a successful install of 9i and windows 2003 R2. Can anyone help with the resolution of these issues.
regards
Alan

some more information
I’ve just restarted the server with its full quota of 16GB of RAM and selected both boot.ini switches (/PAE and /3GB) at server startup. I then amended the dbblock_lru_latches parameter from 128 to 64. Before I even started the database I tried running ‘ipconfig /all’ at the command prompt with the following result:
D:\Oracle>ipconfig /all
Windows IP Configuration
An internal error occurred: Insufficient system resources exist to complete the requested service.
Please contact Microsoft Product Support Services for further help.
is it windows causing these issues?
rgds
alan

Any known issues with Flash player 9 and windows 2003 compatibility?

Hi guys..
Is there any known compatibility problem with running flash
applications
on Windows 2003 Server?
My application runs just so well with Windows XP
yet it throws a 2015 bitmap error
when it is being run on the windows 2003 server.
(Not quite often but often enough. the only difference is the
operating
system)
Is there any known issue about this?
Or could there be any compatibility problem with flash player
and
windows 2003?
Any hints would be deeply appreciated...
Thank you...

Hyperion 32-bit Web Apps are fully compatible with Essbase 64-bit. Same with 32-bit Essbase client.

Big problems with Windows 2003 Server and FX5900

Getting repeated lockups using MSI FX5900XT and Windows 2003 Standard Server. Mouse stops responding and system occassionally locks up completely. I have a dual boot system and windows XP works fine. Windows 2003 works fine if I use the standard VGA driver (I use 1600x1200 16bit 75 Hz resolution and refresh).
The event log usually says:
Event Log
Event Type:   Error
Event Source:   nv
Event Category:   None
Event ID:   108
Date:      18/07/2004
Time:      13:28:25
User:      N/A
Computer:   HOME
Description:
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a
problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your
hardware device vendor for any driver updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Presently using the latest drivers
Any ideas
Thanks
Will

IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 3   Communications Port (COM2)   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   Creative SB Audigy   OK
IRQ 16   NEC PCI to USB Open Host Controller   OK
IRQ 17   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 17   NEC PCI to USB Open Host Controller   OK
IRQ 18   NEC PCI to USB Enhanced Host Controller (B1)   OK
IRQ 19   MSI MS-StarForce GeForce FX 5900XT (NVIDIA GeForce FX 5900XT)   OK
IRQ 20   Standard OpenHCD USB Host Controller   OK
IRQ 20   NVIDIA nForce MCP Networking Controller   OK
IRQ 21   Standard OpenHCD USB Host Controller   OK
IRQ 22   Standard Enhanced PCI to USB Host Controller   OK
IRQ 22   OHCI Compliant IEEE 1394 Host Controller   OK

MSI K9N Neo board- and Windows 2003 R2

Hello,
I am having some compatibility issues with running a K9N Neo board and Windows 2003 r2
--I cant get core center to run
--I cant get audio/sound to work, it is all installed except for one thing.
so then i killed by loading XP drivers that it did not like.
Does anyone have a list of the minmum drivers off my CD that i should install to get it going, or are they on the MSI site for W2k3? I could not find them.
This machine works totally fine with XP and Vista.
thanks

That is mostly correct, absolutely. But it happens that Microsoft thought-up some security measure or two that prohibits some - for example - updating procedures. Here is an example, but I doubt that is your problem. Please note the kb number, you don't have to learn Swedish.
http://support.microsoft.com/kb/922582/sv
Modificacion: Very few companies do I believe produce special 2003 drivers. Don't think I ever saw any MSI ones, anyway. Isn't it enough that XP and Vista works? Those are better for gaming, entertainment, VOIP and such.

Windows 8.1 cannot change password in Windows 2003 domain level domain

On several installations of windows 8.1 enterprise, users cannot change passwords by using <ctrl> + <al> + <del> keys and choosing change password.
The error is: "The security database on the server does not have a computer account for this workstation trust relationship"
Fresh Windows 8.1 enterprise installs with no patches to fully patched windows 8.1 enterprise workstations have the problem. Backed out patches one by one and tested password change without success. Tried various dell laptops, tablets, and workstations
but same issue. Tried VMware guest workstation with windows 8.1 enterprise. The domain functional level is 2003 with a mixture of Windows 2008 R2 DC's and Windows 2003 DC's.
The add/remove from domain did not help. What troubleshooting steps should I take from this point? Is this related to secure channel failures? Note: did not find event log entries for the failures in the DC's nor on the workstation.
Perhaps I did not search for the proper entry on the DC's.

Hi,
Please find below several possible cause of error “The security database on the server does
not have a computer account for this workstation trust relationship”
Secure channel is broken (Can fix by rejoin problematic client to domain)
AD replication issue. The computer account exists on one domain controller but not others.
Duplicated SPN (seems not possible)
So, to narrow down the issue, you need to make sure the AD replication is working fine. Please run command
repadmin /showrepl * on a DC, then post the result here.
After that, please run
set l on a problematic client, then post the result here.
Moreover, please check on system event log and check if there have any related error of the issue.
Thanks.

Windows 8.1 Professional users from a Windows 2003 domain to Microsoft IDs

We've had a Windows 2003 domain for about 10 years. The original reason we created the Windows 2003 domain is no longer valid. (SQL Server integrated security)
We would like to convert the domain user profiles on the Windows 8.1 boxes to user profiles associated with Microsoft ID's.
I tested http://www.forensit.com/domain-migration.html but did not have good results. The challenge was the functionality provided by doing Windows Key + W and entering commands such as user, etc did not work. (ie: the store was messed
up)
So I am thinking the best way to do this is to convert the domain users to local users and then convert the local users to Microsoft ID users. I believe the conversion from local users to Microsoft ID users is native to Windows 8.1.
Questions:
1) Is the Windows 8.1 conversion from local users to Microsoft ID users reliable?
2) What is the best method to convert a domain user provide to a local user profile on Windows 8.1?
Thank you in advance for any assistance you may provide.
Thank you, Bill

Karen & Milos,
Thank you for your assistance on this matter.
Unfortunately, Windows 8.1 Store Apps represent such a massive change in architecture that I don't believe anyone can be 100% positive that copying user profiles will work properly.
In summary, I've tried the following:
1) User Profile Wizard v3.7 from Forensit.com - this was the closest but the Windows Store Apps did not work properly
2) USMT v5.0 - missed many folders and settings
3)
http://www.shofkom.com/2009/03/14/how-to-convert-your-domain-profile-to-a-local-profile/ - had to reconfigure many applications and the Start screen and Task bars were not set properly
4) Variations of
http://www.nextofwindows.com/how-to-change-user-profile-location-in-windows-8-without-registry-hack/ - same as #3
5)
http://social.technet.microsoft.com/Forums/windowsserver/en-US/fac17d6a-3c1b-4188-913e-ac2ec45b3ad6/transferring-from-workgroup-to-domain-keeping-user-profile?forum=winservergen - same as #3
In summary, I've decided to create the Local User as a Microsoft ID and then manually copy the Documents, Pictures, Downloads, Music, Pictures and Videos. The other settings such as Outlook, Startup, Task Bar, Desktop, and other app settings will be manually
configured. :-(
Thank you, Bill

Join a mac in a windows 2003 domain

Hi @ all
since over 20 years i work as systemengineer. with os , as:
novell netware,
microsoft dos , all versions
micosoft windows 3.1 up to windows 7 and all server versions from ms windows.
and was certified lotus notes domino developper
since 2008 i work at home with an macbook, and i love the macintosh very much.
So i have a new task in my company.
I have to integrate MacBooks, MacPro, Imac, all with the actual os, in our large windows 2003 domain.
Please give me help, how i can do this task.
1. How to install the AppleFileProtocol
2. Have i install the afp of all servers ? Domain Controllers, Fileservers, Printservers, Exchange Emailservers and so on ?
3. How can i manage the mircosoft ads with my macintosh.
Please give me a detailed answer. I need tips, and the solution, because i am very interested, that
we use more and more macintosh in our company.
Many thanks
Stefan .. from Germany

ok i can work until 19th of july
on my mac i update to os x lion. what is changed.
i try to connect with the 2008 windows fileserver and get the offer to connect 3 shares.
OK., i connect with 3 shares, and have of all the modify right
on one share i get no access. (could it be that the macuser guest is connected?)
the local username on the mac is the same username as in the win 2k3 ads
the passwort is also the same
since 10.7 lion there is no samba more,
So how can i connect without problems in the windows network.

[SOLVED] Wireless 802.1x PEAP Windows 7 and Windows 2012 NPS and CA

Hello,
We are in progress of migrating our RADIUS (Windows 2003 R2) and Certificate (Windows 2003 R2) servers to 2012 (R2). This went fine, no problems. After that we have changed
our Wireless controller a Cisco 5508. We have change our certificate from a 1024bits to a 2048bits certificate.
We tested the other certificate functions and that went fine too.
But we experience a problem with wireless 802.1x in combination with Windows 7 machines. We have Windows 8 and 8.1 machines that do not experience this problem and wireless 802.1x?
We recreated the wireless policy but also no success.
We have seen this problem before, with a customer who had a Windows 2008 R2 certificate server and Windows XP machines with wireless 802.1x . Exact the same problem. After
decommissioning the Windows 2008 R2 certificate server and changed it to a Windows 2003 R2 certificate server, there where no problems any more.
It looks like that older versions of Windows do not work with newer certificate servers?
Do we miss something? Can someone confirm this.
We already looked for these forum posts, but with no success
http://social.technet.microsoft.com/Forums/windows/en-US/796d447f-518c-4ccb-81ff-921ee561d742/win2k8r2-peapnps-with-cisco-wireless-controller-problem?forum=winserverNIS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/76644dcc-911d-451e-b7f1-39269db43ac7/nps-event-6273-reason-code-16
http://social.technet.microsoft.com/Forums/windowsserver/en-US/d543fe75-0cf9-49e7-bbfa-dd0df219cfe5/the-radius-request-did-not-match-any-configured-connection-request-policy-crp
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:
domainname\NB80W7$
Account Name:
host/NB80W7.domainname.local
Account Domain:
domainname
Fully Qualified Account Name: domainname\NB80W7$
Client Machine:
Security ID:
NULL SID
Account Name:
Fully Qualified Account Name: -
OS-Version:
Called Station Identifier:
08-d0-9f-ec-96-60:domain
Calling Station Identifier:
a0-88-b4-35-2e-08
NAS:
NAS IPv4 Address:
192.168.2.6
NAS IPv6 Address:
NAS Identifier:
WLC5500
NAS Port-Type:
Wireless - IEEE 802.11
NAS Port:
1
RADIUS Client:
Client Friendly Name:
WLC5500
Client IP Address:
192.168.2.6
Authentication Details:
Connection Request Policy Name:
WLC5500
Network Policy Name:
Authentication Provider:
Windows
Authentication Server:
DC01.domainname.local
Authentication Type:
EAP
EAP Type:
Account Session Identifier:
Logging Results:
Accounting information was written to the local log file.
Reason Code:
48
Reason:
The connection request did not match any configured network policy.
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:
domainname\Username
Account Name:
domainname\Username
Account Domain:
domainname
Fully Qualified Account Name: domainname.local/ICT Specialisten/Username
Client Machine:
Security ID:
NULL SID
Account Name:
Fully Qualified Account Name: -
OS-Version:
Called Station Identifier:
08-d0-9f-ec-96-60:domain
Calling Station Identifier:
a0-88-b4-35-2e-08
NAS:
NAS IPv4 Address:
192.168.2.6
NAS IPv6 Address:
NAS Identifier:
WLC5500
NAS Port-Type:
Wireless - IEEE 802.11
NAS Port:
1
RADIUS Client:
Client Friendly Name:
WLC5500
Client IP Address:
192.168.2.6
Authentication Details:
Connection Request Policy Name:
WLC5500
Network Policy Name:
WLC5500
Authentication Provider:
Windows
Authentication Server:
DC01.domainname.local
Authentication Type:
PEAP
EAP Type:
Account Session Identifier:
Logging Results:
Accounting information was written to the local log file.
Reason Code:
16
Reason:
Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.

Hi,
Please confirm the Win7 clients has renew the certificate and deleted the old certificate. And confirm you are not using the default server certificate template.
More information:
Renew a Certificate
http://technet.microsoft.com/en-us/library/cc730605.aspx
NPS Server Certificate: Configure the Template and Autoenrollment
http://msdn.microsoft.com/en-us/library/cc754198.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Transferring the Business Objects Server to a another Windows 2003 Domain

Greeting Everyone
I am in the process of moving the BOX1 Server (Windows Member) from one Windows 2003 Domain to another and want to make the movement as smooth as possible.
I am in the process of making a checklist on what needs to be done before and after the movement of the BOX1 Server. With your expertise can you please advise me on the points to be considered on this movement.
Thanks in advance
Regards
Venkat

Hi Tim
As usual thanks for your prompt response.
I am using BOX1 R1 which is working in an unique way (defy all rules) in my environment. The server is located in Domain ABC and the users are located in domain XYZ. That means user is in one domain and server in another domain. Now we going to place the server in the same domain where the users are.
The answers to your questions are
Is this just the server that is moving? Yes. The server is moving from ABC to XYZ
Is the domain in the same forest as the original? No, They are independent Forests with 1 way trust relationship
Are all the users that login going to keep using the same domain? Yes.
What I am worried is that if I move my server between independent forests then all the SIDs (not sure) of the server will also change to my understanding. Worrying part is that will it hamper the the functionality of the server.
Please also note that FQDN and the IP address will also change.
Please advise and Thanks once again
Venkat VS

Does Oracle 10G R2 support installation on Windows 2003 Domain Controller?

Does Oracle 10g R2 support installation on Windows 2003 Domain Controller? I remember that 10g R1 had issues with the DC? Is it still the case. Does it work now?
Any help is appreciated.
Regards,
Raghav

We have Oracle 10g R2 running on a Windows 2003 domain controller. It was not a domain controller when Oracle was installed. The domain was created after installation. (I don't recommend that procedure. I spent a long day fixing the installation after they configured the domain.) If Oracle is unhappy with being on a domain controller, it has not shown it yet.

10.5.2 and Windows 2003 Domain and Home Folders

Similar Messages

Maybe you are looking for