10.5.2 doesn't fix UPS battery level display

I was hoping this bug in Leopard would be squashed in 10.5.2. Nope!
When I reboot, the battery level display in the Menu bar and Energy Saver Prefs Panel show an empty battery and 0% charge level even though my APC 1500 SmartUPS is fully (100%) charged. The only way to get the computer to recognize the charge level is to put the UPS through a test cycle which resets the USB connection to the computer and forces the computer to pick up the data properly.
This worked properly in Tiger without having to recycle the UPS.
Griff

I'm getting the same issue, sits there at 0%
This is a real pain because I have it set to auto shutdown when the batteries get to 20%. Any power blip causes an immediate shutdown.

Similar Messages

  • 10.5.8 won't show UPS battery level

    I just installed an APC Smart UPS 1000 VA UPS to my Mac Pro server.  The USB cable is plugged in and the UPS battery is fully charged according to the display on the UPS itself.  The Energy Saver control panel is the APC preferred control method (they do not supply software for MAC OS X after 10.4) and all the controls appear as expected with the exception that the Battery Level indicator at the top of the Prefs panel shows 0% full.
    I've unplugged and plugged it back in to no effect.  I restarted the server.  I turned off the power at the wall switch and the UPS ran the server with no dramas for about 10 minutes.  Nothing I tried had any effect.
    There is nothing in the APC support site other than instructions for using Energy Saver panel.
    Our power here has been pretty flaky this year and I want the server to gracefully shut down after about 10 minutes of an outage.  It won't work if the UPS won't talk to the copmputer.
    Steve

    Have you checked to see if another USB device works on the USB port the UPS is connected to?
    You could try some of the suggestions for USB ports not working:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151?viewlocale=en_US
    Common fixes for USB device issues (unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20070824012114701
     Cheers, Tom

  • Px4-300d shuts down/powers off while on UPS battery, regardless of remaining battery level

    Upon line power failure, the UPS is instantly available to supply power to the px4-300d.  The UPS is adequately sized to provide well over an hour of runtime during a power failure.  The only way to have caching operate is to have a UPS connected.  With the UPS connected, the NAS sees the UPS, the current power condition, and an accurate battery power level (%).  Once the power fails, the unit begins its shutdown process and completes gracefully, even though the remaining power in the UPS battery is still near 100%.  The whole point of having UPS backup is to keep the device running for as long as possible during a power failure, and then to gracefully shut-down the device should the UPS battery level reach a critical level and line-power still not restored.  This is MANDATORY to be addressed in the next firmware release, or provide access to a configuration file that specifies the battery level percentage which triggers a shutdown.  Why choose this "Enterprise Quality" storage solution if during a power outage it shuts itself down while everything else is still operating?  Makes absolutely no sense.
    Solved!
    Go to Solution.

    Hi easy-e,
    What is the firmware version on your device currently?
    LifeLine-based network storage devices should remain up and running normally using only UPS battery power until the UPS reports remaining battery is less than 3 minutes or below 5%. At his point, device shutdown will be triggered and your network storage device will gracefully shut down.
    Have you checked to make sure it is compatible?:
    What Universal Power Supply (UPS) models are compatible with my ix or px network device?
    APC UPS not working with network storage device
    If it is not shutting down properly, I would suggest contacting technical support to see if they can troubleshoot the cause of this problem.
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • ACPI battery level stops updating

    Hello,
    I have a strange problem with battery level (displayed using xfce4-power-manager). At startup it updates but not very precisely (not percent by percent), after some minutes  it stops updating.
    I thought it was an xfce problem, so I installed xfce4-power-manager-git. But reading acpi status and getting /sys/class/power_supply/BAT0/ info reports same results as xfce. ACPI does not update battery level!
    Why acpi stops updating my battery level?
    I'm using kernel 3.15.10-1
    xfce4-power-manager-git
    xfce4-power-manager 1.4.1-1
    upower 0.99
    lah

    No one interested about this problem?
    Now, to get battery level I'm manually polling using a cron job executing acpi -V command...
    I've not yet found another solution to get battery level update working.
    I found another interesting point. When I resume from suspend battery level updates... Here are my logs when suspending / resuming
    dmesg
    [ 1137.086386] wlo1: deauthenticating from 00:1f:9f:e7:22:53 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 1137.092006] cfg80211: Calling CRDA to update world regulatory domain
    [ 1137.168083] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
    [ 1137.307402] PM: Syncing filesystems ... done.
    [ 1137.390588] PM: Preparing system for mem sleep
    [ 1137.390812] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 1137.392234] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 1137.393433] PM: Entering mem sleep
    [ 1137.393499] Suspending console(s) (use no_console_suspend to debug)
    [ 1137.394631] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 1137.394711] sd 0:0:0:0: [sda] Stopping disk
    [ 1137.557027] e1000e: EEE TX LPI TIMER: 00000011
    [ 1137.809968] PM: suspend of devices complete after 416.371 msecs
    [ 1137.823466] PM: late suspend of devices complete after 13.483 msecs
    [ 1137.824416] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
    [ 1137.824592] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
    [ 1137.824603] e1000e 0000:00:19.0: System wakeup enabled by ACPI
    [ 1137.824680] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
    [ 1137.836734] PM: noirq suspend of devices complete after 13.269 msecs
    [ 1137.837000] ACPI: Preparing to enter system sleep state S3
    [ 1137.853504] PM: Saving platform NVS memory
    [ 1137.853505] Disabling non-boot CPUs ...
    [ 1137.853535] intel_pstate CPU 1 exiting
    [ 1137.854780] kvm: disabling virtualization on CPU1
    [ 1137.854790] smpboot: CPU 1 is now offline
    [ 1137.855147] intel_pstate CPU 2 exiting
    [ 1137.856377] kvm: disabling virtualization on CPU2
    [ 1137.856383] smpboot: CPU 2 is now offline
    [ 1137.856949] intel_pstate CPU 3 exiting
    [ 1137.858168] kvm: disabling virtualization on CPU3
    [ 1137.858180] smpboot: CPU 3 is now offline
    [ 1137.859931] ACPI: Low-level resume complete
    [ 1137.859980] PM: Restoring platform NVS memory
    [ 1137.861096] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 1137.861225] Enabling non-boot CPUs ...
    [ 1137.861272] x86: Booting SMP configuration:
    [ 1137.861273] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 1137.873339] kvm: enabling virtualization on CPU1
    [ 1137.875919] CPU1 is up
    [ 1137.875970] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 1137.887493] CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
    [ 1137.888105] kvm: enabling virtualization on CPU2
    [ 1137.890491] CPU2 is up
    [ 1137.890527] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 1137.902171] kvm: enabling virtualization on CPU3
    [ 1137.904609] CPU3 is up
    [ 1137.908608] ACPI: Waking up from system sleep state S3
    [ 1138.663122] acpi LNXPOWER:02: Turning OFF
    [ 1138.663203] acpi LNXPOWER:01: Turning OFF
    [ 1138.675606] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 1138.675825] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
    [ 1138.675838] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 1138.722182] PM: noirq resume of devices complete after 58.952 msecs
    [ 1138.722883] PM: early resume of devices complete after 0.648 msecs
    [ 1138.723159] mei_me 0000:00:16.0: irq 32 for MSI/MSI-X
    [ 1138.723478] e1000e 0000:00:19.0: System wakeup disabled by ACPI
    [ 1138.726178] snd_hda_intel 0000:00:1b.0: irq 33 for MSI/MSI-X
    [ 1138.731841] sd 0:0:0:0: [sda] Starting disk
    [ 1138.841851] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
    [ 1138.928730] usb 1-1.3: reset high-speed USB device number 4 using ehci-pci
    [ 1139.045227] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1139.045398] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
    [ 1139.045414] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
    [ 1139.045416] usb 3-2: hub failed to enable device, error -22
    [ 1139.047871] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1139.057847] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1139.058273] ata1.00: configured for UDMA/133
    [ 1139.205382] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
    [ 1139.205409] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1.
    [ 1139.205412] usb 3-2: hub failed to enable device, error -22
    [ 1139.365138] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
    [ 1139.378870] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b3b73120
    [ 1139.841774] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
    [ 1139.841797] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
    [ 1139.841800] usb 3-2.6: hub failed to enable device, error -22
    [ 1140.098137] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
    [ 1140.098161] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 2.
    [ 1140.098165] usb 3-2.6: hub failed to enable device, error -22
    [ 1140.101400] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
    [ 1140.101410] rtc_cmos 00:03: System wakeup disabled by ACPI
    [ 1140.354747] usb 3-2.6: reset low-speed USB device number 3 using xhci_hcd
    [ 1140.370114] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800b3b73180
    [ 1140.370126] usb 3-2.6: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1140.380774] PM: resume of devices complete after 1658.753 msecs
    [ 1140.381265] PM: Finishing wakeup.
    [ 1140.381268] Restarting tasks ...
    [ 1140.381412] acpi PNP0501:00: Still not present
    [ 1140.382480] usb 2-1.6: USB disconnect, device number 3
    [ 1140.389100] done.
    [ 1140.421569] pci_bus 0000:01: Allocating resources
    [ 1140.421585] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 1140.421589] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 1140.421599] pci_bus 0000:02: Allocating resources
    [ 1140.421622] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 1140.421624] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 1140.421632] pci_bus 0000:03: Allocating resources
    [ 1140.421658] pcieport 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 1140.421660] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 1140.421663] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 1140.421668] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1140.421670] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1140.421672] pcieport 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 1140.421674] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1140.421676] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1140.421677] pcieport 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 1140.421687] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref]
    [ 1140.421697] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xbf400000-0xbf5fffff 64bit pref]
    [ 1140.421702] pcieport 0000:00:1c.3: BAR 15: assigned [mem 0xbf600000-0xbf7fffff 64bit pref]
    [ 1140.421707] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 1140.421710] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
    [ 1140.421713] pcieport 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
    [ 1140.421980] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 1140.422076] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
    [ 1140.549726] e1000e: enp0s25 NIC Link is Down
    [ 1140.550076] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [ 1140.577868] usb 2-1.6: new full-speed USB device number 4 using ehci-pci
    [ 1140.662671] usb 2-1.6: string descriptor 0 read error: -22
    [ 1140.684516] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
    [ 1140.771126] usb 2-1.8: new full-speed USB device number 5 using ehci-pci
    [ 1140.784983] usb 2-1.6: USB disconnect, device number 4
    [ 1140.787680] e1000e 0000:00:19.0: irq 34 for MSI/MSI-X
    [ 1140.971041] usb 2-1.6: new full-speed USB device number 6 using ehci-pci
    [ 1141.055968] usb 2-1.6: string descriptor 0 read error: -22
    [ 1144.446140] wlo1: authenticate with 00:1f:9f:e7:22:53
    [ 1144.455094] wlo1: send auth to 00:1f:9f:e7:22:53 (try 1/3)
    [ 1144.457056] wlo1: authenticated
    [ 1144.459038] wlo1: associate with 00:1f:9f:e7:22:53 (try 1/3)
    [ 1144.463874] wlo1: RX AssocResp from 00:1f:9f:e7:22:53 (capab=0x411 status=0 aid=1)
    [ 1144.463995] wlo1: associated
    lah

  • Why does the magic mouse battery level drop suddenly?

    I typically get, oh, about 3 weeks off of a pair of AA alkaline 1.5V batteries on my magic mouse.
    What I don't understand though is not really being able to track the battery level in the bluetooth menu on my iMac 21.5".
    The battery level even now is at 100%. What happens is is that it stays at 100% for several weeks and then all of a sudden drops to 7% or so, and I get a low battery warning. Then after a couple of days the battery will drain out.
    After it drops down to 7% I can usually track the battery drain in the menu. But I never see it at 90% or 80% or 50%, etc. It just drops down suddenly near the end of the battery life.
    Do other people see more continuous changes of the battery level?
    The same thing happens with my bluetooth Apple keyboard that came with the iMac. Right now it is showing a level of 100%. It typically lasts for months instead of weeks, but I will never see an in-between battery level value until I get a low-battery warning.
    I'm thinking of rechargeable batteries for my magic mouse. But I see too many negatives posted here in the forums about that, so I am hesitant about investing in those batteries and a charger if it's not going to work well.
    Thanks,
    doug

    Maybe it's a Mac model issue? I'm running the late 2009 model, purchased in February 2010, and running Lion.
    But I've never seen the battery level display in-between values.
    Here's what it is showing now and I replaced the batteries over a week ago.
    Do your batteries also last a few weeks in the magic mouse?
    Thanks,
    doug

  • 30-pin cable doesn't work in battery charing

    I have bought an official cable and a unofficial cable and I am iphone 4 user. I can't charge my phone with both cable. This is iOS 7 and I restored so many times. Can you tell me how to fix the problem?

    Ok, Is your computer on? If so try putting it in a different USB port. If that doesn't help, try cleaning this part. If that doesn't work, Your battery may be fried.

  • My iPad 2 wifi keeps rebooting , and it doesn't update the battery status . Can anyone help me with this one?

    My Ipad 2 keeps rebooting and it doesn't update the battery status anymore.
    Here is the error
    Incident Identifier: D729F1DF-6960-4847-A6C3-75351A67AE9B
    CrashReporter Key:   c7e1a298a42fc9bbb41b4ed79ff29a1655de12a6
    Hardware Model:      iPad2,1
    Date/Time:       2013-02-16 02:58:06.115 -0800
    OS Version:      iOS 6.0 (10A403)
    CRC ERR!
    I had this problem for quiet sometime now, and I would really appreciate your help. THANKS

    I did try restoring the ipad a couple of times and it didn't do the trick. I also tried updating the firmware.
    The only thing that worked for a while when the ipad - on it's own - rebooted itself into a black screen with white text and automatically fixed the issue. It worked perfectly for a couple of months but it came back after I forgot to charge the ipad , does anyone know how I can force the ipad into that screen again ?

  • Is there a fix for battery drain on ipad 2 IOS 5.0.1? drain from 100% to 70% in less than 20min had it on playing music with display off

    is there a fix for battery drain on ipad 2 IOS 5.0.1? drain from 100% to 70% in less than 20min had it on playing music with display off

    About all that can be suggested is to use the feedback form and talk to Apple. They have communicated with some users, trying to get more info to find out just what the battery drain is so they can fix it. Unfortunately with the myriad of operating systems, apps and individual tweaks, there could be several combinations of settings that are draining the battery.
    My personal suspicion is that it has something to do with iCloud and the wifi syncing. (My ipad, before I changed the setting, was reaching out to find a sync on a regular basis. And it may still be doing so, however I set my iTunes to not automatically open to keep my device from trying to sync several times in an evening...not to mention the constant aggravation of iTunes opening regularly)
    That said, I could be wrong and it could be an app that users have in common, or several apps.

  • Photoshop CS5 update doesn't fix artifact problem in the menu bar !

    Hi to all,
    I've installed the new update (december 7) recommended by Adobe, but that doesn't fix the Artifact problems in the menu bar !!!
    More, with my Windows 7 Pro (French language), Photoshop CS5 video pilot create artifacts in the menu bar in several situations.
    With Windows classic Theme chosen, theme management disabled:
    1. Opening a photo and applying a filter (especially Noise Reduction).
    2. Opening a photo and changing some preferences.
    3. Opening a photo with Windows 7 File Explorer working cause the pilot to crash with a black screen, ans followed by a message saying that Win 7 has recovered the video pilot.
    To suppress most of the problems, I need to Activate "Themes" and choose an Aero theme or the Basic Theme.
    I also need to activate some items that slow the PC !
    Very strange !
    Could someone help, me please ?
    Have a Nice Day.
    Thierry

    Yes, I've an Asus ENGT220/G/DI/1GD3, tried Windows default pilot, 2009 Asus pilot "nv19045_Win7Vista64.zip", and 2010 latest version "nv25919_Win7Vista64.zip", no change !
    More, I've exchanged the video car by a "monster" ENGTX465 with it's driver, NO CHANGE !
    So what to do ?!
    Help, please !

  • When I start Firefox, I only get the background of my browser in the Firefox window. I already reinstalled it, but that doesn't fix the problem.

    When I start Firefox, I only get the background of my browser in the Firefox window. I the normal window for 1 second, but then it changes in only the background window. So without toolbar, or navigation. I already reinstalled it, but that doesn't fix the problem.

    Try to disable hardware acceleration in Firefox.
    Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    https://hacks.mozilla.org/2010/09/hardware-acceleration/
    https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Doesn't find my battery anymore

    Hi, my sweet little white macbook 2ghz doesn't find my battery anymore. The battery icon has X on it. I have to start my macbook with my powercord.
    When I press the battery button bottom of my macbook it shows that I have my battery fully charged.
    Any help?
    -thx-

    im getting sick of this same problem. two weeks ago the battery stopped charing, so the Techs told me to remove the battery and hold down the power button for five secs. it worked... for a day...
    the next morning (after doing a battery calibration) the computer turned on, but the battery icon came up with an X. the battery no longer charges, and i basically have a desktop now, cause i cannot use the battery at all.
    this ***** because i was travelling for work all last week.
    called Apple last night (4th time in two weeks, waited for 1 hour each time). we did some tests. nothing worked.
    i had to argue with the Tech to get a new battery sent to me. she was saying i need to send it to an authorized tech person, which is impossible for me as im 500 miles from the nearest one and cant afford the down time. after all, i bought this thing to WORK on.
    im getting sick of this. and now my screen has started to flicker.
    will Apple take care of me? will they just send me a new machine if this one continues to get worse?
    damien

  • TS3899 Suddenly my font is enlarged when I print any emails.  I've adjusted text size and that doesn't fix

    Suddenly my font is enlarged when I print any emails.  I've adjusted "text size" that doesn't fix, seems to be for display only ?

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    See http://kb.mozillazine.org/Zoom_text_of_web_pages
    Your plugins list shows outdated plugin(s) with known security and stability risks.
    * Shockwave Flash 10.0 r45
    * Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    After updating to ios 5, my calendar sometimes freezes when entering a new event. I have tried syncing but it doesn't fix the problem. Are there any bug fixes for this? Any ideas would be great thanks, I don't really want to have to reset everything!

    Try to reset the iPod by  pressing the home and sleep button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset, but it can clear some glitches after installing new software or apps.

  • The iOS 7.1 update doesn't fix the Wifi issue on iPhone 4S!

    My wifi greyed out since iOS 7, the hair dryer did fix the problem for a day. But it greyed out again after a day, and now the 7.1 update doesn't fix that ****???

    Have you followed the steps listed in iOS: Wi-Fi settings grayed out or dim - Support - Apple?
    If not, do so immediately.  Also, try: iOS: How to back up your data and set up your device as a new device.
    The software update is not the cause of the problem.  It is possible, however, that your hardware (i.e., the wi-fi chip) had a hidden problem, probably with heat tolerance, and the heat generated from the iOS update (the processor creates more heat the harder it works) pushed it past its tolerance.

  • How can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.

    how can I fix the battery drain issue on my iPhone 5s? it started when an updated to iOS 8.2 and upgrading to iOS 8.3 still did not fix it.

    Search this forum.  Your issue has already been addressed ad nauseum. 
    Best,
    GDG

Maybe you are looking for