10.5.2 failed to fix wireless connection dropping problem

10.5.2 did not fix wireless connection dropping problem. I lose wireless connection whenever my MBP restarts or wake up from sleep in the building where I am and have to retype password about 10 times a day. I had not had this problem when I used Tiger. Everyone who has upgraded to Leopard or has it installed on their Mac is experiencing the same problem. Is there any solution or trick to resolve this problem? Thank you.
Message was edited by: FrenchQuarter
Message was edited by: FrenchQuarter

Amularya,
Please read the post I made in this thread earlier. No less than a dozen solutions are offered in the link I provided for wireless issues. Troubleshooting wireless issues requires individual attention because of the plethora of issues which can't be tested for. So please start a new topic thread here:
http://discussions.apple.com/forum.jspa?forumID=1225&start=0
So you can get a wider audience, and won't confuse the original poster with solutions that don't apply to them.
There literally hundreds of different WiFi adapters.
Dozens of different virus and firewall combinations.
Possibilities for damaged WiFi cards and routers, as well as routers whose firmware is not to spec with the latest wireless standard.
To top it off, bad RAM, hard disk being too full, and bad preference, cache or or logfiles can make various aspects of the operating system misbehave, and/or even the directory leading to those files.
Until each person starts their own thread looking for solution individually, chances are they won't find one. Yes, 10.5.2 addresses WiFi for some people. Obviously it doesn't for everyone. The point is, there are some people, like myself who have never had a WiFi issue either with Intel or PowerPC Macs that they couldn't resolve without a little bit of troubleshooting. I'm happy to help you walk through it, but only if you start your own thread asking for help.

Similar Messages

  • Wireless connection drops out for no reason

    I have a macbook with 10.4.11 update. I had my macbook since october last year and had no problems. About two months ago now i have this problem were my wireless connection drops for no reason, my modem/router shows everything is working normal with its lights on the front panel.
    My setup is, motorola sbg900 on a cable 80000mbps wireless network, firewall off on my modem, firewall on on my mac (its always been on), Playstation 3(wireless), PC(wireless, but is switched off), another pc which is wireless and also off, nintendo wii off as well, and a baby monitor.
    I have a feeling its nothing to do with my setup(except for maybe port forwarding) but am wondering if it is an update issue bug that needs to be fixed(thats what im hoping).
    One other thing, when my connection drops in the menu bar and i select it to see which networks are availale, my network motorola8566 is not visible, another 'motorola9522' and 'wireless' network is?My prefered networks dont list any of these in system preferences. Then all of a sudden those other networks dissapear, my network is reshown and i can select it no propblems. What gives? Any help would be great, thanx in advandce

    I have the same issue with my wireless connection being dropped. I have the most recent version of leopard 10.5.2 . The other macbook in this household also has 10.5.2 and has no problems with dropped connections. I tried resetting the pram which helped at first until I used my macbook on the battery alone the problem started to reoccur. Help?!?

  • Wireless connection drops at random

    Hi,
    I have a 27" late 2011 iMAC. Since I updated to Lion my wireless connection drops at random. The wireless symbol shows that I am connected, but i cannot use the internet.
    The sollution at that time is that I turn off wireless, and than turn it on again. This solves the problem, but only temporarely. Since I also own a NAS for TimeMachine backups, the dropping of the connection is annoying because the backups fail most of the time.
    What is causing this problem. I have 2 windows PC's and the connection stays. Router has latest firmware (fritzbox 7340), and my mac is up to date.
    Please help.
    Thanx in advance.

    Hi,
    try to change the WiFi channel on your fritzbox, sometimes it works better on higher channels 11, 12, 13 especially if there are Telekom routers in your neibourhood. Make sure to use the latest Firmware for your Fritz!Box, the actually had a few issues in this area a few months ago. If this still does not help, only activate the 2,4 Ghz Bandwidth on the Firtz!Box and deactivate de 5 Ghz option.
    I hope that this will solve your issue.
    Cheers

  • Wireless connections drops after AirPort Extreme 2007-001 Update

    Hello, I am getting a lot of wireless connection drops since I installed the AirPort Extreme 2007-001 Update. Anyone has similar issue? Any fix?

    Well, I was conneting to the University's wireless server (which is maintained and huge) flawlessly prior to the update. My friend has a macbook pro and didn't apply the update and he has no problem. I installed the update and since then I'm having a hard time connecting to ANY wireless server/router.
    I came across the following, looks like a lot of other persons are having the same issue:
    http://www.macfixit.com/article.php?story=20070202141024604
    http://www.macfixit.com/article.php?story=20070126190822382
    Looks like my solution would be to perform an Archive & Install and to not reinstall the AE 2007-001 update.

  • Wireless connection drops every day -- iTunes 8.02 the problem??

    Hello! Our iMac is connected to the internet via Airport, and we have rarely had problems with the connection. For the last two weeks, when I get on the iMac for the first time that day, I have to reconnect to the wireless network through the Airport Setup Assistant every single time. I've tried resetting our cable modem and Airport -- no effect on the problem. I've tried going into sleep mode without logging off to see if that might help -- nope. I've tried repairing permissions in the off-chance that that might help -- no again.
    In something that seems more than just a coincidence, we updated our iTunes to 8.02 about two weeks ago, and that's when this problem began happening. I am especially suspicious that there's a link because we did not update iTunes on our Macbook and it has no problem whatsoever staying connected to the exact same wireless network.
    Two questions, then:
    -- Is the iTunes 8.02 update the problem?
    -- If so, how do I go back to iTunes 7.7?
    Thanks!

    Hi, I'm new to iTunes and apple, but this is happening to me too! I've got iTunes 8 and whenever I run it, my wireless connection drops (disables itself) and cannot be restarted without rebooting the machine. Did you manage to find an answer?

  • Wireless connection drops after time. Please assist.

    Hi
    My problem is that my wireless connection drops every 5-15 minutes.
    I don't know all the relevant info to give.  If there's something I can post that will help let me know and I'll reply.
    I've used netcfg to configure my network.  I have a Canyon CN-WF511 wireless card.
    I load the following 3 modules in my rc.conf;  rt2500pci rt2x00lib rt2x00pci.  I think those are the only ones pertaining to my network card.
    When it drops I just netcfg -a then netcfg default (profile name) and it works for another few minutes.
    Below is my network profile.
    CONNECTION="wireless"
    INTERFACE=wlan0
    #IP="dhcp"
    #DHCP_TIMEOUT=20
    IP="static"
    IFOPTS="192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    GATEWAY=192.168.0.1
    #DOMAIN=localdomain
    #DNS1=192.168.0.1
    ESSID=default
    SECURITY=none
    SCAN="YES"
    TIMEOUT=15

    The easiest solution might be to setup NetCfg somehow with your wifi card and access point.  Have you tried that?  Can you find your card's chipset on the wiki?(chances are that your particular chipset will need a firmware put into /lib/firmware.  Again that's found on the wiki on the NetCfg or Wifi page, I forget which sorry.)  Those are two places where I'd look for good information.
    By the way, your rc.conf is way out of date.  You should look at updating it by using the recent rc.conf.pacnew file that you'll find in the /etc directory.

  • Wireless Connection drops randomly, kernel related...

    Since one of the many kernel updates in the past week, i'm noticing my wireless connection just... stops. I can't do anything to bring it back up except reboot. which gets very annoying.
    the following was pulled from journalctl:
    Jun 09 11:56:22 sputnik systemd[1]: Starting Bluetooth.
    Jun 09 11:56:22 sputnik systemd[1]: Reached target Bluetooth.
    Jun 09 11:56:23 sputnik kernel: wlan0: authenticate with 10:6f:3f:0c:10:96
    Jun 09 11:56:23 sputnik kernel: wlan0: send auth to 10:6f:3f:0c:10:96 (try 1/3)
    Jun 09 11:56:23 sputnik kernel: wlan0: authenticated
    Jun 09 11:56:23 sputnik kernel: wlan0: associate with 10:6f:3f:0c:10:96 (try 1/3)
    Jun 09 11:56:23 sputnik kernel: wlan0: RX AssocResp from 10:6f:3f:0c:10:96 (capab=0x411 status=0 aid=4)
    Jun 09 11:56:23 sputnik kernel: wlan0: associated
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Failed to wakeup in 500us
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Failed to wakeup in 500us
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Failed to wakeup in 500us
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Failed to wakeup in 500us
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Failed to stop TX DMA, queues=0x10f!
    Jun 09 11:58:47 sputnik kernel: ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Chip reset failed
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Unable to reset channel, reset status -22
    Jun 09 11:58:47 sputnik kernel: ath: phy0: Failed to stop TX DMA, queues=0x10f!
    and it just repeats. i'm still experimenting to see what might fix this, but does anybody have any leads?
    kernel: 3.9.4-1-ARCH
    Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
    tips, tricks, and any other general input is greatly welcome. my next step is to disable power management of the networking card and see if it's a workaround... otherwise just wait for the next kernel and see if it's fixed

    You may find an answer here: http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/

  • Wireless connection drops on 1/2 of computers on network

    I have an Apple Airport Extreme N Router setup to feed my NAS wirelessly to all computers on my network. Some computers on the network can sign in wirelessly (Via TP-Link TEWDN3200 USB Adaptor) and connect to the NAS. The other half drop connections all the time and cannot connect to the NAS in any way using the TP-Link USB adaptor or the PCI-e adaptor. (Via Webserver or mapped network drives) Computers which are wired directly to the router can access the NAS without any problems.
    Some more facts:
    - All computers (with and without the problem) are running Windows XP PRO 32 bit SP3
    - Some computers are using a TP-Link TL-WDN4800 with latest drivers
    - All computers are connecting via the Wireless Zero-config service
    - In the 'status' window on the wireless network, for computers that connect fine, the Netnwork ID remains solid and the connection looks stable.
    - In the 'status' window on the wireless network, for computers that can't connect, the Network ID flashes in and out and the network speed bounces between 450.0 Mbps and 200.0 Mbps. Said computers eventually lose connection and then automatically reconnect only to drop out within an hour or so.
    - All PC's are using DHCP and the addressable range is 99 on the NAS. More than enough for 7 computers.
    - All computers are in the same room and the problem is evident no matter which broadcast channel I use or which frequency. (2.4 gHz or 5 gHz) It is now set to automatic in the Airport because it seems the most stable.
    - I installed a WDN4800 PCI-e adaptor into one of the PC's that worked with a USB adaptor and it no longer works with either!
    Very frustrating! 
    I did some troubleshooting with TP-link, thinking it was their card, but came up with nothing. They think it's the Airport.
    The only telltale sign that the PC is not going to work is that Network name in the status window of the wireless connection. If it's flashing: It won't connect. If it's solid: it works flawlessly for weeks on end.
    Has anyone seen this issue before? If so: what did you do to fix it?

    SOLVED:
    The Airport Extreme is dying. Why it works on some computers and not others is beyond me but, after replacing it, everything works flawlessly. I hope this is covered under warranty.

  • Wireless connection drops

    I know this has been covered in other threads, but I haven't seen my particular situation elucidated. So here goes.
    I'm using an Macbook C2D, an iBook G4, and an Airport Express connected to a ADSL modem.
    On the Macbook, I get intermittent stalls on my wireless connection to the AE. I haven't experienced the same stalls on the iBook. Therefore, I think it has something to do with the Macbook's wireless adapter.
    I have found a work around to this problem, which is to click on the wireless network name in the menu bar when it stalls. this usually forces a reconnect and restores the connection.
    When running a ping, I can see the ping hang when the connection is dropped and start again when it is reestablished.
    I am running OS X 10.4.10 and all the latest firmware/software updates. I have tried several channels on the AE, but the problem persists _only on the Macbook_. Therefore, I assume it is a Macbook issue, which is why I'm posting here.
    I have also read that people have had this issue when operating on battery. For me, it doesn't matter if I'm on battery or the power adapter.
    If anyone has any suggestions, I'd love to hear them.
    cheers,
    -n

    there is a soltion by user "IamNobody" in other thread that worked for me:
    *HAVE FIXED THE PROBLEM!!!!! Here's what I did:*
    1) Download Pacifist http://www.versiontracker.com/dyn/moreinfo/macosx/12743
    2) Download airport extreme update 2007-002
    3) Download 10.4.9 combo update
    4) Go to /system/library/extensions and copy appleairport.kext and appleairport2.kext to a backup location just to be safe and then delete them from the extensions folder.
    5) Also in the extensions folder you'll find IO80211Family.kext and copy it to backup folder and then delete it.
    6) Mount airport extreme update dmg and then open Pacifist.
    7) In Pacifist click on "Open Package" and select the airport extreme update package.
    8) In Pacifist you will now see all the files that are in the package. Find system and expand it's tree by clicking on the triangle. then expand library and then extensions. You will now see the IO80211Family.kext file. Click once on it so it's highlighted and then click "Install".
    9) When it's done copying files expand coreservices and then menu extras. Highlight "Airport Menu" and click install.
    10) When it's done copying close the window in Pacifist for the airport update package.
    11) Now mount the 10.4.9 combo update dmg and click "Open Package" in Pacifist and select the 10.4.9 combo package.
    12) Again find the system folder and expand it and then expand the libray and extensions folders.
    13) In the extensions folder you'll see a bunch of files. Look for appleairport.kext and highlight it. Click "Install".
    14) when it's done copying you should see the appleairport2.kext. Highlight it and click "install".
    15) when Pacifist is done copying reboot your Macbook.
    16) Once booted try your internet and then jump up and down shouting YIPEEEEE!!! IT'S FIXED!!
    I have now had a solid connection for over 30 minutes on battery as I've been typing these instructions when I couldn't stay connected for more then 1-3 minutes before applying this fix.
    Who needs Applecare support!!!!...HEHEHEHE!!!!
    Hope this helps and enjoy having your internet connection back. I think I'll send Apple a bill for all my labor time fixing their bug. Boy wouldn't they just love that..LOL!!!!
    THIS IS WHAT WORKED FOR ME! FOLLOW THIS GUIDE AT YOUR OWN RISK!! I TAKE NO RESPONSIBILITY IF SOMETHING GOES WRONG SUCH AS YOU DELETED THE WRONG FILES OR YOUR SYSTEM HAS OTHER ISSUES THAT MAY AFFECT THE OUTCOME!!!

  • Wireless connection drops sporadically

    I have a Linksys router that wirelessly connects my iBook G4 and my roommate's G4 tower. It also connects to my G4 tower, but that's a wired connection.
    I used to use a Linksys Wireless-B (2.4 ghz 802.11b), but it broke and now I have a Wireless-G. But, both router's gave me the exact same problem. Sporadically, the wireless connection just drops for about 5 or 6 seconds. I haven't seen any pattern, as far as how often it occurs, and I can't for the life of me figure out why it's happening.
    I was told that it might be interference, so I changed the channel to 11, and everything seemed to work great for about 3 or 4 days. Then, it started happening again. I switched to channel 1, and that didn't help. I switched to a different channel, again no help. Now I'm back on 11, and it's still dropping off sporadically.
    I'm pretty sure this never happens to the wired connection, but I don't use that computer very often. Any suggestions? This has been going on for months, and I don't have the faintest idea how to fix it!

    I am with you Joel.
    I recently purchased a G5 iMac with built-in AirPort and I am having the same problem. Yes I have a cordless phone in the house and it could be interfering, but I also have a Windows laptop (I know, I know...Booo) which is on the same wireless network and it has no trouble communicating. I have tried different channels on my router and the Mac works for awhile, but then the connection starts and stops.
    I was hoping the latest firmware updates for AirPort would have one for the Extreme card, but no go.
    I haven't yet sat the wireless router right next to the computer to see if that cures the "interference", but that is the next step in my troubleshooting. If the pulsing internet stops pulsating and I get a constant connection I will believe all the interference rhetoric, but until then I am sceptical.
    Note: I also tried the "Interference Robustness" setting and that just made it worse. There doesn't seem to be much help on that setting so I have abandoned it. Any insight from anyone on that setting?
    Barry
    G5 iMac iSight   Mac OS X (10.4.3)  

  • WRT54GS wireless connection drops on laptop when wired desktop is turned on.

    I've had this router for a few years now and have never had a problem.  But recently my laptop wireless connection dies when my desktop, which is connection via ethernet is turned on.  In trying to fix the problem, I've upgraded the firmware, but that didn't end up working.  I recently upgraded to vista from xp on the desktop computer, so I don't know if this is what started the problem.  I don't recall if this problem started before I upgraded. 
    I don't know what sort of additional information you guys would need to help diagnose the problem, so just let me know and I'll get that info for you.
    Thanks,
    Kurt

    Check under Local Area Conneciton in Desktop that if there is any other connection except Local Area Connection is present ... if so then delete or disable that ...
    Also check that if there is any USB connection from Modem to the Computer ....

  • Wireless Connection Dropping on MacBook Pro

    Hello,
    I have been running into an issue with my Macbook Pro dropping wireless connection to Alcatel Wireless access points. It happens when I disconnect AC power and run off of the battery. It usually drops the signal a few minutes after that. I have run all the updates and it still seems to be happening. We can tell when it drops because we are kicked off of a Filemaker remote database. Has anyone else run into this issue?
    Thanks!

    macsat wrote:
    I narrowed down the issue some time ago, but still it haven't been fixed (not even in the 2007.04 wireless update):
    http://discussions.apple.com/thread.jspa?messageID=4854252&#4854252
    Please beware that Pacifist-based "fixes" like that advocated in the thread in question above have two notable downsides:
    1) You will remove certain functional and security fixes from your system.
    2) You may break future software updates as your system will be listed as having some software installed that no longer is installed.
    I understand the frustration, but if you choose to "fix" your problem in this way, beware it is not without danger and may cause you future issues.

  • Frequent wireless connection drops: how to re-connect?

    My wireless connection has become quite unreliable of late, and I'm not sure how to diagnose/fix the problem. Configuration:
    MacBook Pro4,1
    Intel Core2 Duo
    Max OS X 10.6.6
    When the connection drops, I first try to "Turn Airport On" with the menu bar, but this has no effect.
    Using Network Preferences to "Turn Aiport On" also has no effect.
    Turning to the command line, I try 'ifconfig -a', and get:
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    status: inactive
    I tried bouncing the en1 interface using:
    ifconfig en1 down
    ifconfig en1 up
    But the status stays inactive. Any thoughts on what I should try? A reboot always
    resets things and gets them working again, but it's incredibly annoying to have to
    reboot when in the middle of something.

    bangaboo wrote:
    My wireless connection has become quite unreliable of late
    It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
    6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    They may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

  • WVC54GCA Wireless connection drops off everyday.

    I have to restart the camera everyday beacuse it looses it wireless connection. I don't have a lenght of time it stays connected. I'm using a Linksys WAP54G connected to a RVS4000 router.  I see others are haveing the same problem.  My laptop stays comnnected so I don't think it is the WAP. 

    You shouldn't have to do this, if you give each camera a fixed IP.
    I have 4 cameras, I'm using one on a cable and the other 3 wirelessly.
    The wireless ones  all drop off and fall asleep at anytime during the day/night, but the one on thr cable doesn't.
    I think, it's a communications/handshaking problem within the wireless network. When the wireless signal fluctuates too much, the cameras don't come back.
    I solve this with a ping to the cameras. The first ping usually comes back dead with 100 % packet loss.
    The second ping may take 3000 ms.
    The third ping usually gets them back to normal, around 2-3 ms.
    All is good after that (for a while).
    I don't seem to have that problem, when the cameras are streaming. Sometimes I get a short break in the stream after a while. I've put this down to heat developing in the camera, but I'm not sure.
    Anyway, Ithink, a static IP is a must for these cameras, if you use them wirelessly.
    Cheers

  • Intermittent Wireless Connection, Dropping Wireless Connection

    I am asking this in hopes of finding at least some way to diagnose my problem and hopefully eventually solving it. My wireless connection currently drops at varying amounts of time. Sometimes I can go 20mins others merely 5mins. The Airport reads that I am still connected and have a strong connection but when I try to navigate to a page with the browser (either firefox or safari) it merely times out after trying to load the page for up to a few minutes. I have changed the channel and frequency of my router (first router I tried was a Trendnet TEW-432BRP) and I have no cordless phones or other possible wireless obstructions. (I do have a very very infrequently used microwave but being that it's on the other side of the house and I can be sitting next to the router I doubt this is the culprit)
    Then I tried changing routers to a Belkin N1 Vision router. Same issues. Additionaly worth noting all other PC's and linux machines on my network (about 4-5 other computers) all work just fine with out dropping their connections (with both routers).
    Then I brought my original machine (a white macbook less than a year old) into the apple store, thinking at this point it was a hardware problem with my machine. They the replaced the airport card twice and the logicboard once. Eventually decideing that they should just replace the whole machine. Now with my new unibody I thought I had finally illeviated the problem but now I am having the same issues with an intermittent connection again.
    If I turn off the Airport card and turn it back on again usually it will reconnect and allow me to browse again. But not always. The odd part is that generally when using another program that accesses the net the connection does not seem to be interrupted (such as with bit torrent). Very odd.
    Anyway I tried using my computer at a friends house with the same trendnet router (his router but same model) and still the connection issues persist. Any ideas on what I can do or try to at least even begin to understand why this is happening would be helpful. I want very much to get to the bottom of this. Thanks for your help.

    You didn't get the Apple Store to replace a white MacBook with a unibody?!
    Anyhow - the connection problems could easily relate to an incompatibility between OS X and the router in question. Or it could simply be a setting on the router that isn't working well. To assist in the diagnosis... can you please supply:
    1) The security mode of the router? (WEP or WPA/WPA2 and AES or TKIP).
    2) The network mode (G/N)?
    3) The signal strength as reported by Airport (RSSI)
    You can get most of this information (all except the security mode) by holding the option key down whilst clicking on the Airport icon in Finder. For the security setting you can go to your routers configuration screen (or you can get it from the command line).
    Cheers,
    Rodney

Maybe you are looking for

  • Plans to enable import of Cinema DNG (RAW) files from the Blackmagic POCKET Cinema Camera

    Are there plans to enable import of Cinema DNG (RAW) files from the Black Magic POCKET Cinema Camera into Adobe Premiere Pro CS6?

  • Transfer/ Synchronizing eBooks between different devices

    Hi, Currently I have Digital Edition installed on my Win8 Dell Laptop, Samsung Galaxy Note 10.1, and Apple iPad 3, and sign in with the same Adobe account. I have downloaded some ACS encrypted eBooks, in both PDF and ePub format. Anybody have any ide

  • Scanning and copying

    I can no longer scan from my laptop to the printer, nor can I copy from the printer location.  I can print from my computer to the copier but that is all.  When I did the updates the last time, this is what happened.  How can I get my printer to scan

  • IWeb '08 transfer to another computer

    I have been using iWeb '08 for a while now and love it. I run a website for a university organization. I am graduating soon and need to pass the website to the next person. The next person has iWeb '08. How can I transfer the files to their computer?

  • Uploading from Aperture

    Hello. I went from PC to MAC 8 months ago and I am as happy as can be. I used iPhoto for the first six months and really liked it. Not wanting to spend a whole lot of money and buy Photoshop for the Mac (only have pc license and the Photoshop I have