10.5.2 fixes permissions errors

The 10.5.2 update appears to fix the permissions errors I was getting on my MacBook Pro (unable to open Photoshop, couldn't add/remove names to Address Book).
And despite other posts, not having a problem opening Entourage.

Same here.
From another post I just made:
SEEMS TO HAVE REPAIRED MY "UNKNOWN USER" issue as far as I can tell. My Applications Folder no longer shows the write-protected icon in the lower left corner and if I Get Info on the Applications folder all three permissions show correct now for the first time (I was getting two Unknown Users previously). One thing it did not change is that I am still assigned a 502 ID instead of 501 in the Accounts > Advanced Options - not sure if this is going to present a problem or not in the future?
For the first time "UPDATES" has appeared ACTIVE in my Adobe CS3 Apps and it actually self-launched for the first time in Leopard - so this must have been a permissions issue previously with the Unknown User as the suspect?

Similar Messages

Liquify tool says write permissions error, how do i fix?

Liquify tool is the only thing I can't seem to use in Photoshop so far, it gives me a write permissions error...why? My permissions are set to read & write...

HI I have this same problem. I uninstalled Photoshop CC and Photoshop CC 2014, reinstalled the latest Photoshop CC 2014 and now I am unable to use the liquify tool because I do not have "permission." I went in and double check that I have read and write permission, as well, I changed everyone to read and write permission and I still cannot use liquify. Help would be appreciated as no one from Adobe has contacted me even though I was promised a phone call yesterday.

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

How to fix download error on Adobe Creative Cloud

How to fix download error on Adobe Creative Cloud, I've reinstalled like three times and it's not working.

Quit Creative Cloud desktop application and close All Adobe applications.
Follow below steps :
Step 1 :
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.( Do not miss ~ symbol)
~/library
3)Then navigate to Application Support>Adobe
Right click on Adobe folder and select "GetInfo" option.
Expand the Sharing & Permissions section.
Click the lock icon in the lower-right corner. Enter your administrator user name and password when prompted, and then click OK.
Please click on '+' symbol , it will open list of user accounts. Add Currently logged in user name and Administrator option,
Then provide "Read & Write" permission to Currently logged in user name and Administrator option,.
Click the Gear icon, and select Apply to Enclosed Item. Close the Get Info dialog box.
Step 2:
1) Right click on Finder icon and select "Go-To" Folder option.
2) You will get a text box, type-in below command and then hit 'Return' key.
/library
3)Then navigate to Application Support>Adobe
Right click on Adobe folder and select "GetInfo" option.
Expand the Sharing & Permissions section.
Click the lock icon in the lower-right corner. Enter your administrator user name and password when prompted, and then click OK.
Please click on '+' symbol , it will open list of user accounts. Add Currently logged in user name and Administrator option,
Then provide "Read & Write" permission to Currently logged in user name and Administrator option,.
Click the Gear icon, and select Apply to Enclosed Item. Close the Get Info dialog box.
Then launch Creative Cloud desktop application and check.

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

That's an error reported from DVD Player I believe...
kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

Permissions errors? ./private/etc/authorization, should be 80, group is 0

in the past 3 days i've been finding a error show up- on several machines- where programs would quit before they would even start up.
the only way i've found to fix it, has been to run "Disk Utility" and repair the permissions for the drive management.
Repairing permissions for “Macintosh HD”
Determining correct file permissions.
Group differs on ./private/etc/authorization, should be 80, group is 0
Owner and group corrected on ./private/etc/authorization
Permissions corrected on ./private/etc/authorization
has anyone else found this error? where is this coming from?

Thanks!
Until I fixed this error using Disk Utility, I couldn't install a 3rd party software app. I didn't log in as root to do it either, just repaired permissions and the install "took" the second time. I'm a member of the admin group... at least I thought I was! My user account says I'm an administrator and I'm the only user on this mac... any way to see what my user account rights are? I know netinfo, but I don't know how to interprate it?

Exchange 2010 Public Folders Cannot Change Permissions Errors from Management Console and Powershell

This problem does not affect new public folders, only old ones that have probably been on Exchange 2000/2003 servers in the past. Migrations I believe did go smoothly but now have errors.
Error Reported is:
Microsoft Exchange Error
The following error(s) occurred while saving changes:
Add-PublicFolderClientPermission
Failed
Error:
Failed to modify the MAPI.NET table property of the object "000000001A447390AA6611CD9BC800AA002FC45A030064004E9CC2F8DD46B5E1E4578DE6D8030000000278E90000" on server "FQDN.Server.Name". See inner exception for more information.
MapiExceptionNonCanonicalACL: Unable to modify table. (hr=0x80004005, ec=2409)
Diagnostic context:
    Lid: 40487   EMSMDBMT.EcDoRpcExt2 called [length=218]
    Lid: 56871   EMSMDBMT.EcDoRpcExt2 returned [ec=0x0][length=356][latency=0]
    Lid: 23226   --- ROP Parse Start ---
    Lid: 27962   ROP: ropModifyACL [64]
    Lid: 17082   ROP Error: 0x969
    Lid: 27745
    Lid: 21921   StoreEc: 0x969
    Lid: 27962   ROP: ropExtendedError [250]
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 26426   ROP: ropModifyACL [64]
    Lid: 22086
    Lid: 27128
    Lid: 27232   StoreEc: 0x8004010F
    Lid: 27128
    Lid: 27232   StoreEc: 0x8004010F
    Lid: 22086
    Lid: 21970   StoreEc: 0x8004010F PropTag: 0x3D210102
    Lid: 19149   Error: 0x0
    Lid: 24509   Error: 0x0
    Lid: 31229   Error: 0x0
    Lid: 21970   StoreEc: 0x8004010F PropTag: 0x668F0040
    Lid: 6671    StoreEc: 0x8004010F
    Lid: 24976
    Lid: 24952
    Lid: 25472
    Lid: 7972    StoreEc: 0x969
    Lid: 26532
    Lid: 4920    StoreEc: 0x969
    Lid: 5119    StoreEc: 0x969
    Lid: 5247    StoreEc: 0x969
    Lid: 17916   StoreEc: 0x969
    Lid: 4814    StoreEc: 0x969
    Lid: 1750    ---- Remote Context End ----
    Lid: 26849
    Lid: 21817   ROP Failure: 0x969
    Lid: 29150
    Lid: 20446   StoreEc: 0x969
OK
From ExFolders we get error "Exception: Object Reference not set to an instance of an object"
Any thought on how to fix permissions, people who already had permission in the past can see and access them OK and all objects, but we cannot change/update or remove permissons
We alos receive similar error from the powershell.

Hi,
Could
you please add a new public folder hierarchies with ADSIEdit as following setups.
For how to use ADSIEdit ,you can access:
http://technet.microsoft.com/en-us/library/cc773354(WS.10).aspx
1.Run ADSIEdit, right click Exchange Administrative Group under “Configuration \ services \ Microsoft
Exchange \ Organization name \ Administrative groups”.
2.Select New Object.
3.Select msExchPublicFolderTreeContainer for the class and click Next.
4.Enter the following for the value:
Folder Hierarchies, click Next.
5.Click Finish.
6.Create
Public Folder Tree Object.
7.Right click CN=Folder Hierarchies -> New Object.
8.Selected msExchPFTree for the class.
9.For the value we entered, "Public Folders" and clicked next.
10.Clicked on the "More Attributes" button, selected msExchPFTreeType .
11.Set the value
to 1.
Note: This is very important that this value is set
to a value of 1 as This tells Exchange that this is a MAPI Tree.
12.Click Ok and then finish.
13.We then went
to the properties of the newly created "Public Folders" Tree object in
ADSIEdit.
14.Copy the distinguished name value
to the clipboard and then click cancel.
15.Navigate
to the Storage group that contains the Public
Folder Store for this server and get properties of the server.
16.Locate the msExchOwningPFTree attribute and paste in the value that was copied
from the Public folders Distinguish name attribute.
17.Restart the Information Store Service.
18.Mounted and dismount the PF store.
19.Open Outlook with administrator,give full permission to default owner.
Hope it can help you!

Update 'download only' gets permissions error

I can do a normal update, but when I try to do an update, using the "download only" option, I get an error:
None of the checked updates could be downloaded.
Make sure you have permissions to write to /Library/Packages, then try again.
I'm an admin and admin is the group owner of /Library/Packages
permissions are drwxrwxr-x on /Library/Packages
I've tried fixing permissions in the disk utility, but no change.
I can create and remove an empty folder in that directory.
I reiterate, I can apply the update if I don't use the "download only" option.
Mac Mini Intel Mac OS X (10.4.8)

This problem reminds me of issues with Software Update in 10.3. The update would fail with a message about checking permissions somewhere. Usually, these messages were red herrings and the problem was somewhere else.
One way that you might get a better message would be to start the console app (from the utilities menu). When the console.log file is open on your screen, try a download only operation. When it fails, see if anything is printed in the console log. If so, you could post it here and see if someone can make sense of it.
Rich
EMAC G4 1.0 GHz Mac OS X (10.4.9)

Error -61 with FTP Write permissions error; Not a publisher

Hi,
I am trying to use Safari to FTP with my schools server (FreeBSD) but when I try to delete something I get error -61 which is FTP Write permissions error; Not a publisher. When I select "Get Info" I see the permissions say "You can only read". How can I fix this?

Hi Rob
so far as I know, Safari and/or Finder can only read from ftp sites - hence the response you are seeing.
I've used http://cyberduck.ch/ for a few years - there are many other free/sharewware ftp clients

Just upgraded to Lion and cannot open files on my old SL partition - permissions error

I have just installed Lion on my 2008 MacPro on a new internal HD and cannot open word/text etc files on the original Snow Leopard disc. I get a permissions error. I can preview the file but not open it. When I do a get info, I can add my user and give it R&W permissions but still cannot open the file. I have a third disc with just videos and no system and this is OK.
For information my upgrade method was as follows:
     Install blank hard disc and fromat it.
     Clone original HD onto new drive using CCC
     Give it a new name
     Boot from the new clone and go through the lion install
     Update the new system to 10.7.4
     Repair disc permissions
Through this method, I have a duplicate set of files on the Lion partition and these I have no problem opening, it is just those on the SL disc.
Any ideas as to how to fix this. I did the duplication as I still want to be able to boot from SL for some old applications and hardware (a film scanner being one).
Thanks
Dave

Softwater,
Well, I booted back into SL, and as I mentioned, I did have filesharing enabled. So I added the whole disc as shared and re-booted back into Lion.
Still no luck. I get exactly the same permissions error and cannot open any files. This seems crazy that from Lion I cannot open files on other bootable partitions.
I added myself as a RW permission on the disc via Get info and still cannot see the files. This is very strange behaviour. According to get info on the disc, I have full read/write access and on the file itself.
I can see all the files on non-bootable partions.
Dave

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Does anyone know how to fix an error in cc photoshop on Win8 that says puppet warp could not complete request due to program error?

Questions on using a specific program should go in that program forum
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

How do I fix this error, Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: 'Modal session requires modal window'?

     I have been trying to start up my Batman: Arkham City game recently and it says that it cannot open and gives me this error;
               "Terminating app due to uncaught exception 'NSInternalInconsistancyException', reason: 'Model session requires model window'"
     I have played the game for about 13 hours before this error started to pop up and I was wondering if anyone knew of a way to fix it. Any information would be greatly appreaciated.

Yesterday I had the same problem.
I installed the game and played for five hours with no problem but in the last execution my iMac show me that error. I tried to uninstall and install the game again but always show me the error. I did the same with the Steam client with no solution.
Finally I fixed the error deleting a folder.
Go to Macintosh HD/Users/[username]/Library/Caches/com.feralinteractive.bmac
and delete the folder named "com.plausiblelabs.crashreporter.data"
Try to launch the game again.
Good luck.

10.5.2 fixes permissions errors

Similar Messages

Maybe you are looking for