10.5.3 Server Upgrade Hang
I have downloaded the upgrade to 10.5.3 server and went on to the installation phase. It asks me to reboot the computer I press continue and it restarts the computer entering the installation mode where it starts the installation. It 'configures the installation' and then stops. The bar goes about a half centimeter, and hangs. I have checked the quality of my drive and it is fine. Is any one else having this issue?
The server is a second gen macbook.
The machine also dual boots into 10.5.3 client.
Message was edited by: ChrisPerr
<Thread Relocated by Moderator to Appropriate Technical Forum>
Welcome to Apple Discussions!
I've asked a moderator move this thread to the appropriate Mac OS X server forum:
http://discussions.apple.com/category.jspa?categoryID=96
Most people running client never run server, so we'd be at a loss to explain how to fix your situation unless you run into someone who happens to browse this forum that also knows Server.
Similar Messages
-
The upgrade hangs a lot of time in phase PARCONV_UPG, SHADOW_IMPORT_UPG2..
Hello!!:
I'm doing the CU&UC, as say the Guide, and now i'm upgrading my 46C MDMP system to Ecc6.0 nounicode (later i'm going to
do the unicode).
In the phases RUN_RADCUCNT_ALL, SHADOW_IMPORT_UPG2,....has been a lot of time.
In the Note OSS 558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2, there is a solution
for a Oracle Database, but we have MSSQL2005 in a Windows Server.
In this moment in our DB we have applied as say the Note OSS 187493 - DB13 jobs 'Check table Consistency'
and 'Update statistics', and sometimes in the biggest tables we apply the Note OSS 771352 - Manual UPDATE STATISTICS
re-enables Disabled Automatic Stats
Can you help us? In this moment the upgrade downtime is 48 hours (and we haven't yet done some phases of the
upgrade)
Thanks an regards,
Alfredo.Alfredo,
Here is the down and skinny on this - PARCONV_UPG can be addressed with ICNV (Incremental Table Conversion) which you can run during the 'Up' Time of the upgrade. Of course there are some limitations put on you when using this solution but it will help to reduce your down-time windows be pre-converting tables during up-time. Those tables that are not converted in ICNV will have to be converted during down-time during the PARCONV_UPG phase so I am pretty sure that your database is getting its (stuff here....) handed to it.
As a 'suggestion' and not a rule here (because it effects recovery of SQL Databases) you can look at using Bulk Logged or Simple Logged modes if your system is using Full-Logged mode to speed things up a bit (actually quite a bit if Full-Logged is enabled).
As for the SHADOW_IMPORT_UPG2 - this is mostly going to be tp putting things in the system and some compiling - the speed of the Db and the processors play a big impact in this. You can watch the SLOG in the upgrade directory to check this out (look in your upgrade guide for Log Files during this phase to get their names and locations) to see if anything is hanging but I would probably expect not much is going on.
Overall you need to identify the bottleneck first - CPU, Memory, Db I/O, a number of things can contribute to your issues of slow upgrade time - as I would have to agree with SAP that there is nothing wrong with the Upgrade Process (except that you can take advantage of things like ICNV where possible - read the upgrade guide and hit the notes and help first!!). Everything else is going to be your setup and how it reacts to the different activities in the upgrade.
So check those out first - let us all know what you come up with and hopefully we can fix your problem directly and quickly.
Edited by: David Milliken on Apr 3, 2008 7:09 PM
Edited by: David Milliken on Apr 3, 2008 7:10 PM -
10.6.8 -- 10.9 Upgrade: hangs at "Upgrading services"
10.6.8 --> 10.9 Upgrade: hangs at Server App "Upgrading services"
Upgraded XServe-Early-2009 to Mavericks OS no problem. Albeit extremely slow (50min install, 2hr cataloging).
Initiating Server for 1st time renders a Hang at "Upgrading services" (left it for 1-1/2hrs).
Then computer claims hard disk is almost full, so I trashed a bunch of crap.
Force Quit (Server install) and Restart shows white screen.
Target FireWire in order to DiskWarrior and Repair Permissions brought XServe back to life.
Downloaded Server App again (for kicks).
2nd attempt at running Server App renders a Hang again at "Upgrading services".
Was I being silly thinking I'd have a flawless Upgrade and get home in time for Turkey ?
Does anybody have any ideas what could be happening ?
Thanks, and have a Happy Thansgiving !!
Jay Luke
(914) 906-1140 cell text
[email protected]You were probably foolish to try this before a holiday weekend. Repeat after me...
Q: What is the first rule of upgrading OS X Server on a Production Server?
A: You don't upgrade OS X Server on a Production Server.
Q: What is the second rule of upgrading OS X Server on a Production Server?
A: You DO NOT upgrade OS X Server on a Production Server without a backup!
You get the point. Hopefully, this made you smile a bit. I feel your pain.
So, first... Tell me you have a backup of the 10.6.8 boot volume before your started and that you can restore, walk away slowly, and pretend this never happened.
If this is not the case, the next step is to define a list of all services that you had running on the server before attempting the upgrade. Remember, there are a lot of services removed between 10.6 and 10.9 (Podcast, MySQL, Tomcat, QTSS, etc). If you were using one of those services, the upgrade process may be halting. Likewise, if you are using something like mail, there may be a long reindexing process. So, while the 1 to 1.5 hours sounds very long, it is possible that the server was doing something. That leads to the next place to look.
What was being reported in the log files. System log, Open Directory log, and even the all events log can be helpful in tracking down an error or long running process.
Likewise, what does Activity Viewer show during this upgrade. What process(es) is/are consuming CPU? Disk I/O? The assumption is that the server is trying to do something (hopefully).
You are going to need your put on your Sherlock Holmes' deerstalker for this one. I will also point out that the "out of disk space" error is sounding particularly terrifying.
You may be having a very long Friday.
R-
Apple Consultants Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in the iBooks Store -
SCSM 2010 to 2012 Management server upgrade failed
I upgrading my scsm 2010 to 2012 both Management and DW server.
So i have set up the secondary lab environment and do this.
The DW server has been upgraded successfully to 2012.
When i try to upgrade SCSM Management server, at the finalizing stage, i get this error as _RegisterExtensionsDeferred
Log as below.
2014-08-26T14:48:28.7717429+05:30 Always: Trace Session Started
02:48:28:
02:48:28:Application Started
02:48:28:This is 64-bit application.
02:48:28:Product ID is NOT installed
02:48:28:Found ProductID:{A193A8C7-CBE7-4F3B-887F-6B03EE43A208}, ProductName:Microsoft System Center Service Manager SP1, Version:7.0.6555.128
02:48:28:Found SMServer components
02:48:28:Found SMConsole components
02:48:28:Setup is running from: c:\SCSM2012\amd64\Setup
02:48:28:Using local Analysis server as default instance
02:48:28:Using 'DWASDataBase' as default Analysis server database name
02:48:28:Using 'Default' as default Analysis server database file path
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_license.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\SCSM_EvalLicense.rtf.
02:48:29:Current UI culture (en-US) is not supported. Trying Neutral culture.
02:48:29:Found c:\SCSM2012\amd64\Setup\en\PrerequisiteInputFile.xml.
02:48:29:Found c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:48:29:All vital setup files found.
02:48:29:Upgrading Service Manager 7.0.6555 with 7.5.1561
02:48:29:Checking dependencies for Server upgrade...
02:48:40:Managment server is registered with Datawarehouse 'TESTSER'
02:48:42:Datawarehouse is up-to-date
02:48:42:Getting Management Group information from TESTSER:ServiceManagerNew
02:48:42:[GetManagementGroupPropertiesFromDB]: Opened the DB connection using Data Source=TESTSER;Initial Catalog=ServiceManagerNew;Integrated Security=True;Persist Security Info=False.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Management Group information.
02:48:42:[GetManagementGroupPropertiesFromDB]: Found Primary SDK server:..net.
02:48:42:Validating SmAdminRoleGroup
02:48:43:Checking MU OptIn state
02:48:43:MU is not opted in
02:48:43:Start adding DataItems
02:48:43:System Center Service Manager Install
02:48:44:Final Install Tasks
02:48:44:Done adding DataItems
02:48:46:Getting Domain List
02:49:35:LoadPrerequisites: Start adding ComponentTitles
02:49:35:LoadPrerequisites: Start adding DataItems
02:49:35:Memory check
02:49:36:Microsoft SQL Server 2008 Analysis Management Objects
02:49:36:Memory check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:Processor speed check
02:49:36:IIS check
02:49:36:ASP.NET check
02:49:36:Basic Authentication check
02:49:36:Windows Authentication check
02:49:36:Microsoft .NET Framework 4 check
02:49:36:Windows Service Pack check
02:49:36:Microsoft Report Viewer Redistributable check
02:49:36:PowerShell 2.0 check
02:49:36:SharePoint Server 2010 check
02:49:36:SharePoint Farm Administrator check
02:49:36:SharePoint Server 2010 configuration check
02:49:36:ADO.NET Data Services Update check
02:49:36:Microsoft SQL Server 2008 Native Client check
02:49:36:Language Pack for SharePoint Server 2010 or SharePoint Foundation 2010 - English check
02:49:36:LoadPrerequisites: Done adding prerequisites checks
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Memory check prereq.
02:49:36:CheckPrerequisites: Logic Type:and MemoryCheck-8gbWarn: 0
02:49:36:
02:49:36:CheckPrerequisites: Memory check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Analysis Management Objects prereq.
02:49:36:Entered RequiredAMO
02:49:36:Trying alternate method of detection using Assembly.Load
02:49:36:CheckPrerequisites: Logic Type:and AMO-err: 0
02:49:36:
02:49:36:CheckPrerequisites: Microsoft SQL Server 2008 Analysis Management Objects: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Processor speed check prereq.
02:49:36:CheckPrerequisites: Logic Type:and ProcessorSpeedCheck2.5MHz-Warn: 0
02:49:36:CheckPrerequisites: Logic Type:and ProcessorCoreCheck2Core-Warn: 0
02:49:36:
02:49:36:CheckPrerequisites: Processor speed check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Windows Service Pack check prereq.
02:49:36:CheckPrerequisites: Logic Type:and Win2k8R2Sp1Check-Err: 0
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites: ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites: Logic Type:or Win2k8R2Sp1DCCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites: The value 6.1.7601.65536 was not within the range 6.2.0 to 9.9.9999.
02:49:36:CheckPrerequisites: Logic Type:or WinSrvrVNextCheck-Err: 2
02:49:36:CheckPrerequisites:
02:49:36:CheckPrerequisites: ProductType was not a match. Looking for: LanmanNT Found: ServerNT
02:49:36:CheckPrerequisites: Logic Type:or WinSrvrVNextDCCheck-Err: 2
02:49:36:
02:49:36:CheckPrerequisites: Windows Service Pack check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft Report Viewer Redistributable check prereq.
02:49:36:Entered RequiredReportViewer
02:49:36:CheckPrerequisites: Logic Type:and RptVwrCheck-err: 0
02:49:36:
02:49:36:CheckPrerequisites: Microsoft Report Viewer Redistributable check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking PowerShell 2.0 check prereq.
02:49:36:CheckPrerequisites: Logic Type:and PowerShell2Check-err: 0
02:49:36:CheckPrerequisites: Logic Type:or PowerShell2Check32-err: 0
02:49:36:
02:49:36:CheckPrerequisites: PowerShell 2.0 check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking ADO.NET Data Services Update check prereq.
02:49:36:Loading System.Data.Services.Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
02:49:36:Found version 3.5.30729.5420
02:49:36:CheckPrerequisites: Logic Type:and ADODotNetDataServicesHotfix-err: 0
02:49:36:
02:49:36:CheckPrerequisites: ADO.NET Data Services Update check: Passed
02:49:36:
02:49:36:**************************************************
02:49:36:
02:49:36:**************************************************
02:49:36:CheckPrerequisites: Checking Microsoft SQL Server 2008 Native Client check prereq.
02:49:36:CheckPrerequisites: Logic Type:and SQLNCLI10-err: 0
02:49:36:
02:49:36:CheckPrerequisites: Microsoft SQL Server 2008 Native Client check: Passed
02:49:36:
02:49:36:**************************************************
02:49:37:CheckPrerequisites: Return Value 0
02:49:39:Doing Pre-Upgrade checks...
02:49:39:Validating database ServiceManagerNew on SQL Server TESTSER
02:49:39:Validating SQL Instance TESTSER
02:49:39:SQL Server: TESTSER
02:49:39:SQL Server version: 10.50.1600.1
02:49:39:Full text search installed: True
02:49:39:Checking if '\administrator' is Sysadmin Or (SecurityAdmin And DbCreator) on SQL Instance TESTSER
02:49:39:Stopping Service OMSDK on server
02:49:39:Starting Service OMSDK on server
02:49:41:Stopping Service OMCFG on server
02:49:44:Starting Service OMCFG on server
02:49:47:Validating Path C:\Program Files\Microsoft System Center\Service Manager 2010\
02:49:47:Checking for available free disck space
02:49:47:Checking directory write access
02:49:47:*** Pre-Upgrade checks passed ***
02:49:47:QuickFixEngineeringHandler: Unable to LoadQuickFixEngineeringFile.
02:49:47:SetProgressScreen: StartMinorStep.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:ProcessInstalls: Install Item System Center Service Manager Install has a Preprocessing delegate of SystemCenterServiceManagerPreinstallProcessor. Launching it now.
02:49:47:SetProgressScreen: Init MSI Install progress.
02:49:47:statusUpdate: Resetting progress bar.
02:49:47:LaunchMsi: Msi mutex is not in use.
02:49:47:LaunchMsi: MSI to launch is: c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMsi: Turning off the internal UI for c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:49:47:LaunchMSI: Enable logging for the MSI at C:\Users\administrator.\AppData\Local\Temp\2\\SCSMInstall02.log.
02:49:47:LaunchMsi: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi is not in silent mode. Setting the external UI.
02:49:47:LaunchMsi: Launching c:\SCSM2012\amd64\Setup\Server\SM.msi
02:49:52:statusUpdate: Resetting progress bar for MSI: MaxValue 58857
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:09:Install Progress - (ProcessComponents) Updating component registration
02:50:09:statusUpdate: Resetting progress bar for MSI: MaxValue 345710070
02:50:10:Install Progress - (StopServices) Stopping services
02:50:16:Install Progress - (_StopNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Stopping Health services
02:50:17:Install Progress - (RemoveODBC) Removing ODBC components
02:50:17:Install Progress - (RemoveFiles) Removing files
02:50:17:Install Progress - (CreateFolders) Creating folders
02:50:17:Install Progress - (InstallFiles) Copying new files
02:50:30:Install Progress - (_CreateDatabase) Creating Database
02:50:30:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:07:Install Progress - (ExecuteSqlStrings) Executing SQL Strings
02:52:07:Install Progress - (CreateShortcuts) Creating shortcuts
02:52:07:Install Progress - (WriteRegistryValues) Writing system registry values
02:52:08:Install Progress - (_InstallServerPerfCounters.D2179E31_E456_401A_A820_CEBB135E3429) Installing Server Performance Counters
02:52:12:Install Progress - (WriteEnvironmentStrings) Updating environment strings
02:52:12:Install Progress - (_Rollback_UninstallBIDMOF.68918168_3885_4F75_BBF8_0CC84213F8D1) Rolling back BID MOF Installation
02:52:23:Install Progress - (GenerateScript) Generating script operations for action:
02:52:24:Install Progress - (_MPProcessorDeferred) Importing Management Packs
02:52:25:Install Progress - (_ExecuteSqlScripts) Configuring Database
02:52:26:Install Progress - (RegisterUser) Registering user
02:52:26:Install Progress - (RegisterProduct) Registering product
02:52:26:Install Progress - (PublishComponents) Publishing Qualified Components
02:52:26:Install Progress - (MsiPublishAssemblies) Publishing assembly information
02:52:26:Install Progress - (_ConfigureConfigService.D2179E31_E456_401A_A820_CEBB135E3429) Configure Config Service
02:52:26:Install Progress - (_CreateInstanceQualityRelationship) Creating Default Instances, Qualities And There Relationships
02:52:26:Install Progress - (PublishFeatures) Publishing product features
02:52:26:Install Progress - (_StartNamedServices_HealthService.80B659D9_F758_4E7D_B4FA_E53FC737DCC9) Restarting Health Service
02:52:26:Install Progress - (PublishProduct) Publishing product information
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:52:26:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:32:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:An error occurred while executing a custom action:_RegisterExtensionsDeferred
Upgrade failed after making permanent changes to this management server. A disaster recovery procedure will be necessary to rebuild this machine before attempting upgrade again. Consult the User Guide to determine which action to take next.
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 177276452
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 3
02:57:44:Install Progress - (Rollback) Rolling back action:
02:57:44:statusUpdate: Resetting progress bar for MSI: MaxValue 10525
02:58:43:MsiInstallProduct finished for msi c:\SCSM2012\amd64\Setup\Server\SM.msi.
02:58:43:LaunchMSI: Setting rollback to true
02:58:43:LaunchMSI: MSI c:\SCSM2012\amd64\Setup\Server\SM.msi returned error 1603:Fatal error during installation
02:58:43:ProcessInstalls: Install Item System Center Service Manager Install failed to install. We did not launch the post process delegate.
02:58:43:SetProgressScreen: FinishMinorStep.
regards Sundaresan.CJeremiah,
We ran into this as well. One of two options:
1.) Just run a repair on the SQL Server installation
2.) Repair the WMI settings on the SQL Server as descibed here:
http://social.technet.microsoft.com/Forums/en-US/systemcenterservicemanager/thread/2a91d03e-a685-495e-89ac-a591ec5871f6/
bb -
Data source migration in parallel to CRM server upgradation
Hi Experts,
We are working on BI 7.0 system which pulls data from CRM 2004. Recently we upgraded BI environment from BW3.5 (to BI.70 SP -16).
Now we are re-modeling the existing BI design due to performance issues & to use BI functionalities. We would like to migrate the data sources in BI also to BI version so that we can get advantage of using DTP & transformations.
But the issue here is now we started to up grade our source system also from CRM 2004 --> CRM 2007. I beleive that the data source version will be maintained in source system (CRM) tables also.
So if we migrate the data source now (before CRM upgrade), will it cause any issues in BI once CRM server upgrade done?
Note: We can implement all of our new designs with out data source migration.
Please advice us to proceed. Let me know if you need more details.
Thanks in advance.
Regards,
Arun Thangaraj.Hi reddy,
1). Why Migration Process?
Migration process is to convert BW 3.x objects ( such as Data source, Trasfer rules and update rules etc) into BI 7.0 objests.
2). Why we are Migrating BW 3.X objects into 7.0 objects?
We are Migrating 3.x data source into 7.0 inorder to avail three functions, Those are
a). Direct data acquisition
b). Realtime Data Acquisition (RDA)
c). BI Accelarator.
3) .Regarding With export and Withour export options ?
These two options come in the process of Migration step. Regarding these options clearly described in the fourth point as bellow.
4). What will happen in this Migration process?
( Remember at the time Migration Transfer structure and Transfer rlues deleted, keep in mind go throgh bellow steps).
What ever may be the option selected (i.e, With Export or Without export ) data source will migrate to 7.0.
But if you choose With export option deleted Transfer Structure and Trasfer Rules will store in the table " RSDSEXPORT". If you select other option (i.e, Without export ) the deleted Trasfer structure and trasfer rules perminently not avaliable.
Thats why always go with With Export option only. This will help to revert back 7.0 data source into 3.5 data source when ever is there any requirement in future.
Please go look into bellow link.
Re: Migration of datasource from 3.5 to 7.0
if u r satisfed about my answer please assign points.
Thanks & Regards,
Kotesh. -
10.6.8 to Mavericks Server Upgrade loses Open Directory Users
Hi,
I have an OpenDirectory Master running OSX Server 10.6.8. An upgrade to Mavericks 10.9 has just failed.
The server has about 50 OD users and passwords need to be retained across the upgrade. Apart from OD, the only other active service is AFP file sharing.
DNS is good forward and back as per this article: OS X Server: Steps to take before upgrading or migrating the Open Directory database
I followed these Apple guidelines for server migration: OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server.
I cloned the boot drive, booted from the clone, upgraded to Mavericks, then installed the Mavericks Server app.
On opening the Mavericks Server app "Configuring services' showed for 5 minutes, but then an error message appeared. I did not record it exactly, but it was something like, "There was an error configuring the server. Certificate not valid!".
I was able to continue through the error but on opening Server app there were no OD (local/network) users showing. Authentication was not happening.
I had underestimated the time to get the installation done and I had used up the window of downtime I had booked - I did not have much time to troubleshoot. So, I cut back to the original hard drive and the server is back to 10.6.8 again.
Can anyone point me in the right direction to find out what may have gone wrong? How can I get my users into 10.9 Server?
Many thanks,
b.Linc Davis advice is spot-on, as usual.
There seem to be dozens of sub-databases in the LDAP database. A problem in any of them seems to derail the entire conversion process. I tried a straight conversion and was also disappointed that there were unresolved issues, and it meant that the conversion failed.
So I did the export route using WorkGroup Manager, and exported four sets:
Users
Groups
Computers
Computer groups
go to the appropriate pane (e.g., Users) and Select All, then choose Export, and give it a name (probably with an embedded date in case you need to do it again later)
Then use 10.9 WorkGroup Manager (available as a separate download) to Import.
When re-imported, everything worked just fine (except the passwords, which cannot be carried forward using this method). I did have to manually enable at least one service, such as File Sharing service in Server [admin], or users showed up as "not allowed" [to log in].
This entire process of getting Server 3 to work is fraught with peril, and everything converges on ONE diagnostic, "Network users can't log in". Which means you blew it, but provides no additional information about WHERE you blew it.
There do not appear to be any magic bullets. It is just a tough slog. Users who reported success after failing the first time reported they returned to fundamental principles and did all the steps over, in order, to attain success. -
Upgrade hangs at TABIM_POST_SHD
Hi all,
My ecc 6 EHP6 upgrade hangs at TABIM_POST_SHD .This is running for the past 5 hours still not completed.From pas experience this phase has never taken so much time .There are no backgroung jobs running nor are the logs being updated.Only 1 file is being updated which sort of runs in loop.
file name is N140317.FED .Following is its content.
=========
1 ED0320XStart phase "001" **********************************************************
1 ED0306 "Preprocessing of TBATG"
1 ED0301 *************************************************************************
1 ED0301X*************************************************************************
1 ED0306 "Preprocessing of TBATG"
1 ED0322 End phase "001" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "frecchrdev01_9_13959196"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "17.03.2014", "16:30:41"
1 ED0318 Program end==============================================================
A2 ESEEF_BASE 500 Start mass activation for enh. objects at "41" (after-import call)"16:30:41"
1AETR012XProgram terminated (job: "RDDGEN0L", no.: "16304100")
1AEPU320 See job log"RDDGEN0L""16304100""FED"
1 ED0317XProgram start============================================================
1 ED0314
1 ED0314 DD: Execution of Database Operations
1 ED0314
1 ED0302 =========================================================================
1 ED0327 Process..................: "frecchrdev01_12_17104976"
1 ED0303 User.....................: "DDIC"
1 ED0305 Date, time...............: "17.03.2014", "16:31:41"
1 ED0307 Platform.................: "CUSTOMER"-"FED"("731")/"ORACLE/AIX/frecchrdev01"
1 ED0311 Tool.....................: "BATCH"/"RADBAT01"
1 ED0315 Log......................: "F", "/EHP6/SUM/abap/tmp/N140317.FED"
1 ED0314
1 ED0316 Program parameters:
1 ED0314 Process cat..............: sequential
1 ED0302 =========================================================================
1 ED0320XStart phase "001" **********************************************************
1 ED0306 "Preprocessing of TBATG"
1 ED0301 *************************************************************************
1 ED0301X*************************************************************************
1 ED0306 "Preprocessing of TBATG"
1 ED0322 End phase "001" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "frecchrdev01_12_17104976"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "17.03.2014", "16:31:41"
1 ED0318 Program end==============================================================
A2 ESEEF_BASE 500 Start mass activation for enh. objects at "41" (after-import call)"16:31:41"
Any help is appreciated
Regards,
Venkatesh IyerTHe content of Phases.log
1 ETQ201 Entering upgrade-phase "MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD" ("20140317193414")
4 ETQ399 Set database connect to shadow.
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01' Client = '000'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ399 Requirement for tp maps to 'exe'
4 ETQ383 translates to path "/EHP6/SUM/abap/exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399 default TPPARAM: SHADOW.TPP
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01' Client = '000'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPDSC
4 ETQ399 auth_shadow_upgrade=<null>
1 ETQ200 Executing actual phase 'MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = ''
2 ETQ399 Arg[1] = 'TABUPOSTSHD.TP0'
2 ETQ399 Arg[2] = ''
2 ETQ399 Arg[3] = 'dummybuffer;buffertest=I'
1 ETQ399 Using error summary log 'TABUPOSTSHD.ELG'.
1 ETQ399 Executing putsteps '{|(n'.
2 ETQ399 Putsteps '{|(n' means no R3trans and no batch processes, so not generating parameters for parallel execution.
3 ETQ399 20140317193414: PID 18677868 execute '/EHP6/SUM/abap/exe/tp pf=/EHP6/SUM/abap/var/SHADOW.TPP checkimpdp FED' , output written to '/EHP6/SUM/abap/log/TOOLOUT.LOG'.
3 ETQ399 20140317193415: PID 18677868 exited with status 200 (time 1.000 real)
1EETQ399 Last error code set is: Calling '/EHP6/SUM/abap/exe/tp' failed with return code 200, check /EHP6/SUM/abap/log/TOOLOUT.LOG for details
tp used shadow connect
1EETQ204 Upgrade phase "TABIM_POST_SHD" aborted with severe errors ("20140317193415")
Content of ULOG14_1
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/NTACT_ALTNT:
fedadm 20140317101106 : tp ntaction ntop=ANTCPINT FED pf=/EHP6/SUM/abap/var/NTMOVMTT.TPP srctt=DDNTT~ srctf=DDNTF~ dsttt=DDMTT~ dsttf=DDMTF~ intdel=YES ttnot=_J -Dntact_timecmp=no protyear=80 totabname=E1 (pid=4259874)
fedadm 20140317101106 : tp ntaction ntop=ANTCPINT FED pf=/EHP6/SUM/abap/var/NTMOVMTT.TPP srctt=DDNTT~ srctf=DDNTF~ dsttt=DDMTT~ dsttf=DDMTF~ intdel=YES ttnot=_J -Dntact_timecmp=no protyear=81 fromtabname=E1 totabname=PP (pid=20250662)
fedadm 20140317101107 : tp ntaction ntop=ANTCPINT FED pf=/EHP6/SUM/abap/var/NTMOVMTT.TPP srctt=DDNTT~ srctf=DDNTF~ dsttt=DDMTT~ dsttf=DDMTF~ intdel=YES ttnot=_J -Dntact_timecmp=no protyear=82 fromtabname=PP (pid=19464390)
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/READPUTTB_UPG_SHD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/CHANGEPROF_SHD2ND:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/START_SHDI_SHD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/SETUPGPAR_SGENPROCS:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RFCDEST_CREATE_S2OX:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/CREATEDBCON_ORIG:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_UPDATE_DDYTT:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSCPINTS_STDRESTORE:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSINCGEN_SHD3:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSUPG_DRBEXT_VALIDATE:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_MSSSPEXE_SH2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_RSUPGCUA_SH2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSUPGBAD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/JOB_RDDNEWPP_SHD2:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RUN_RSCPINTS_POOL2SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
fedadm 20140317102925 : tp pf=/EHP6/SUM/abap/var/SHADOW.TPP delstopmark buffer=FED (pid=22347776)
fedadm 20140317102925 : tp pf=/EHP6/SUM/abap/var/TABUPOSTSHD.TPP put FED (pid=22347778)
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
### Phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/TABIM_POST_SHD:
Regards,
Venkatesh iyer -
my sun application server 8 hang whenever i access the admin console (http;//localhost:4848). and when i look at the task manager in process tab appserv.exe. it does not running in memory.
thanks for your reply.Hi, I'm having the same problem. When I start the Server from within Netbeans, I get the message "Starting Sun Java System Application Server" and then nothing else happens. Here's the log:
[#|2006-09-04T14:45:35.312-0400|INFO|sun-appserver-pe9.0|javax.enterprise.tools.launcher|_ThreadID=10;_ThreadName=main;|
D:/Sun/AppServer/jdk\bin\java
-client
-Xmx512m
-XX:NewRatio=2
-Dcom.sun.aas.defaultLogFile=D:/Sun/AppServer/domains/domain1/logs/server.log
-Djava.endorsed.dirs=D:/Sun/AppServer/lib/endorsed
-Djava.security.policy=D:/Sun/AppServer/domains/domain1/config/server.policy
-Djava.security.auth.login.config=D:/Sun/AppServer/domains/domain1/config/login.conf
-Dsun.rmi.dgc.server.gcInterval=3600000
-Dsun.rmi.dgc.client.gcInterval=3600000
-Djavax.net.ssl.keyStore=D:/Sun/AppServer/domains/domain1/config/keystore.jks
-Djavax.net.ssl.trustStore=D:/Sun/AppServer/domains/domain1/config/cacerts.jks
-Djava.ext.dirs=D:/Sun/AppServer/jdk/jre/lib/ext;D:/Sun/AppServer/domains/domain1/lib/ext;D:/Sun/AppServer/javadb/lib
-Djdbc.drivers=org.apache.derby.jdbc.ClientDriver
-Djavax.management.builder.initial=com.sun.enterprise.admin.server.core.jmx.AppServerMBeanServerBuilder
-Dcom.sun.enterprise.config.config_environment_factory_class=com.sun.enterprise.config.serverbeans.AppserverConfigEnvironmentFactory
-Dcom.sun.enterprise.taglibs=appserv-jstl.jar,jsf-impl.jar
-Dcom.sun.enterprise.taglisteners=jsf-impl.jar
-Dcom.sun.aas.classloader.optionalOverrideableChain=appserv-ws.jar,commons-logging.jar,commons-launcher.jar
-Dcom.sun.aas.classloader.appserverChainJars=admin-cli.jar,admin-cli-ee.jar,dbschema.jar,j2ee-svc.jar
-Dcom.sun.aas.classloader.serverClassPath.ee=%HADB_HOME%/lib/hadbjdbc4.jar,D:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbm.jar,%HADB_HOME%/lib/hadbmgt.jar,D:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Dcom.sun.aas.configName=server-config
-Ddomain.name=domain1
-Djmx.invoke.getters=true
-Dcom.sun.aas.promptForIdentity=true
-Dcom.sun.aas.classloader.optionalOverrideableChain.ee=
-Dcom.sun.aas.instanceRoot=D:/Sun/AppServer/domains/domain1
-Dcom.sun.aas.domainName=domain1
-Dcom.sun.aas.classloader.sharedChainJars=javaee.jar,D:/Sun/AppServer/jdk/lib/tools.jar,install/applications/jmsra/imqjmsra.jar,commons-launcher.jar,D:/Sun/AppServer/imq/lib/jaxm-api.jar,D:/Sun/AppServer/imq/lib/fscontext.jar,D:/Sun/AppServer/imq/lib/imqbroker.jar,D:/Sun/AppServer/imq/lib/imqjmx.jar,D:/Sun/AppServer/imq/lib/imqxm.jar,D:/Sun/AppServer/lib/ant/lib/ant.jar,appserv-ws.jar,mail.jar,jsf-api.jar,jsf-impl.jar,appserv-jstl.jar,appserv-env.jar,jmxremote_optional.jar,D:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar,commons-logging.jar,activation.jar,appserv-rt.jar,appserv-admin.jar,appserv-cmp.jar
-Dcom.sun.aas.classloader.sharedChainJars.ee=appserv-se.jar,appserv-ee.jar,%HADB_HOME%/lib/dbstate.jar,%HADB_HOME%/lib/hadbjdbc4.jar,jgroups-all.jar,D:/Sun/AppServer/lib/SUNWmfwk/lib/mfwk_instrum_tk.jar
-Djava.util.logging.manager=com.sun.enterprise.server.logging.ServerLogManager
-Dcom.sun.enterprise.overrideablejavaxpackages=javax.xml.bind,javax.help,javax.portlet
-Dcom.sun.aas.classloader.serverClassPath=D:/Sun/AppServer/lib/install/applications/jmsra/imqjmsra.jar,D:/Sun/AppServer/imq/lib/jaxm-api.jar,D:/Sun/AppServer/imq/lib/fscontext.jar,D:/Sun/AppServer/imq/lib/imqbroker.jar,D:/Sun/AppServer/imq/lib/imqjmx.jar,D:/Sun/AppServer/lib/ant/lib/ant.jar,D:/Sun/AppServer/lib/SUNWjdmk/5.1/lib/jdmkrt.jar
-Dcom.sun.aas.classloader.appserverChainJars.ee=
-Dcom.sun.aas.configRoot=D:/Sun/AppServer/config
-Djava.library.path=D:/Sun/AppServer/jdk\jre\bin\client;D:\Sun\AppServer\lib;D:\Sun\AppServer\lib;D:\Sun\AppServer\jdk\bin;.;C:\WINNT\system32;C:\WINNT;D:\Sun\AppServer\lib;D:\Sun\AppServer\bin;D:\Sun\AppServer\lib;D:\Sun\AppServer\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;%JAVA_HOME%\bin ;C:\SQLLIB\BIN;C:\SQLLIB\FUNCTION;C:\SQLLIB\SAMPLES\REPL;C:\SQLLIB\HELP;C:\IMNNQ_NT;D:\Sun\AppServer\bin;D:\Sun2\AppServer\bin;;;
-Dcom.sun.aas.instanceName=server
-Dcom.sun.aas.processLauncher=SE
-Dcom.sun.aas.installRoot=D:/Sun/AppServer
-Dcom.sun.aas.ClassPathPrefix=
-Dcom.sun.aas.ClassPathSuffix=
-Dcom.sun.aas.ServerClassPath=
-cp
;D:/Sun/AppServer/lib/appserv-launch.jar
com.sun.enterprise.server.PELaunch
start
display
native|#] -
Adobe QT32 server keeps hanging up all the time.....
I am having some trouble with Premiere Elements 12.1
Adobe QT32 Server ist hanging up all the time. Cancelling the process is making the programm unusable. Keeping it running means that it nearly takes all of my resources and ram up to 90 percent....
Any ideas? Would be very thankfull for help!!!
My Specs:
MacBook Pre 13'' late 2011
OSX Yosemite (10.10.2.)
2,4 GHz Intel Core i5
16 GB 1333 MHz DDR3
Intel HD Graphics 3000 512 MB
Thanxbernhardl
Thanks for the replies.
With regard to the file named "Adobe Premiere Elements Prefs"......It is the settings file. And, its deletion has proven at times to be
the answer to all sort of program malfunctions. From what I understand, the Mac path to this Prefs file is
Users\Owner\Libraries\Application Support\Adobe\Premiere Elements\12.0.
In Windows, I typically write to delete the Adobe Premiere Elements Prefs file and, if that does not work, then the whole 12.0 Folder
in which it exists. I am not sure if the whole 12.0 Folder deletion is OK for Mac as it is for Windows.
ATR -
Hi,I am using the server socket in Java to listen on a port on a computer..
I am using the windows platform
I use ms vj++6.0
I am facing a peculiar problem.
about once in 10 messages received by my server socket,
The server socket hangs .
Hangs means it stops responding to the incoming message & so my application
is unable to take any action.
I used a port scanner & found that my server port is in a "close_wait"
state.
Can someone tell me the reason for this.
is it a problem with my server or can the client that sends the message be
also responsible for this type of an error.
Heres the code for my server
public server()
try
server = new ServerSocket(2156);
serverthread = new Thread(this);
serverthread.start();
catch(Exception e)
System.out.println("Cannot Start Thread" + e);
public synchronized void run()
try
while(true)
String line;
System.out.println("listening for the client");
fromclient = server.accept();
System.out.println("client has responded");
InputStreamReader isr = new
InputStreamReader(fromclient.getInputStream());
BufferedReader instream = new BufferedReader(isr);
PrintWriter ostream = new PrintWriter(new
BufferedOutputStream(fromclient.getOutputStream()));
System.out.println("talking to the client\n");
ostream.println("Hye Client");
ostream.println("Bye");
ostream.flush();
System.out.println("listening to the client \n");
String temp;
int count=0;
String ip="";
while((line=instream.readLine())!=null)
System.out.println(line+"\n");
if (line.equals("Bye"))
break;
if (line.equals(""))
continue;
else
System.out.println(line+"\n"); /*Print the line that has come in the
socket*/
ostream.close();
fromclient.close();
catch(Exception e)
System.out.println("Cannot listen to the client" + e);
I hope somebody can help me out .
Thanx in advance
Regards
Sanket GuptaYou don't seem to properly close the server socket any where. Here why don't you look at this skeleton. This may help you.
import java.net.*;
import java.io.*;
import java.util.*;
public class server
static boolean listen = true;
public static void main(String args[])
try
ServerSocket ss = new ServerSocket(2156);
do
new serverThread(ss.accept()).start();
while(listen);
ss.close();
catch(IOException e)
System.err.println(e.getMessage());
public static void shutdown()
listen = false;
class serverThread extends Thread
private Socket client;
private String input;
private BufferedReader in;
private PrintWriter out;
public serverThread(Socket c)
client = c;
public void run()
try
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(client.getOutputStream(),true);
input = in.readLine();
if(input.equals("Hello"))
out.println("How are you doing?");
else if(input.equals("shutdown!"))
server.shutdown();
else
out.println("Bad Request!");
in.close();
out.close();
client.close();
catch(IOException e)
System.err.println(e.getMessage());
} -
Help! - Xserve running Mac OS X 10.6 Server keep hanging!
I have a situation here where the Xserve I set up running Mac OS X 10.6 Server keeps hanging after a while. I have re-installed from the scratch thinking it was the third party software I used in importing users and groups but the problem is still there. I checked the error log of directory services and the only error I can see is "Network Transition Occurred". I read some fix on the internet as regards to the spotlight re-indexing being the likely cause. I have enabled the privacy setting of spotlight with the hope that this will stop. I am still waiting because I implemented this some couple of minutes ago. Do anyone know the solution to this issue in case the spotlight setting does not work. I am kinda frustrated with this issue.
There are many possible issues.
Network transition, to me, sounds like there is something happening that is changing the network settings. Disable any wifi if you can. Check and double check all network cables, static IP addresses, DNS, make sure there are no rouge DCHP servers on the network, or multiple routers, etc...
I would check to see if there are networking issues.
Also, if you're running Time Machine (TM), try turning it off for a few days (of course, have a good solid backup actively running, just not TM, which isn't really the best for a server anyways for various reasons.
Cheers,
Daniel -
10.5 to 10.6 Server Upgrade - Apache Fail
Hello,
I did a server upgrade last night from Leopard 10.5 Server to Snow Leopard Server. Everything went surprisingly well aside from one issue I've detected. All my existing services are working with the exception of the Web service. It starts and I get the green light but Apache is not working. In the overview, it says web service has started but no information on Apache version or start time.
Prior to the update I had been running Apache 2.2 so I assumed everything would be happy updating the OS. When the service is off and I click on the Logs tab I see all my old logs, as soon as I start the service everything goes blank so somewhere there is a disconnect with Apache 2.
Any ideas where to start? I cloned the server to another RAID set just in case of failure plus I have my backups, I even tried deleting everything in the Apache2 folder and replacing it with my 10.5 Apache2 contents but still no luck.
A bit baffled.I like your idea but after doing some research it appears as if the upgrade did not install somethings cause reactivating the system with the default php that ships does not work at all. I would have preferred to do it your way. I did build php ver 5.3.8 and its all working, even the ionCube module but I'm just wresting with a small issue iconv, believed to be a bug. But if I could wipe the slate clean and have everything default I would have, it's just every reference I found pertianing to the factory installation of php were not there.
My only reason for the upgrade to begin with is to support the ionCube module for an OpenRealty installation, other than that server 10.5 was working perfect for me. I would love to have it just work as 10.6 intended and working and stable as you mentioned, just not sure if its possible at this point.
Apache 2.2, PHP 5.3.8, and MYSQL are all working at the moment.
My small issue, loving this apache command,
Syntax error on line 1464 of /private/etc/apache2/httpd.conf: Syntax error on line 8 of /etc/apache2/sites/+entropy-php.conf: Cannot load /usr/local/php5/libphp5.so into server: dlopen(/usr/local/php5/libphp5.so, 10): Library not loaded: /usr/local/php5/lib/libiconv.2.dylib\n Referenced from: /usr/local/php5/libphp5.so\n Reason: Incompatible library version: libphp5.so requires version 8.0.0 or later, but libiconv.2.dylib provides version 7.0.0 -
Server got hang while doing FI posting
Hi experts
While POSTING THE PAYROLL DOCUMENT (scheduled as a background job in SAP PRDN server), the server got hanged due to some hardware issue and had to switch off.
Now in PCP0, the run status of the document is shown as "Documents posted", but no entries have been made in FI module for this payroll document.
We tried to reverse the document, but is it creating "incorrect reversal document".
Kindly advise us what should we do now.
Thanks in advance.Hi,
if posting has happened incorrectly and values are not in the tables then do this
find the document that is posted with the status indicator 50. if you dont find it set the filter and find it then check the check box of
that document the reverse it.
another way if the document is posted then please check the GL accounts amount that is posted. if you dont find any amounts are posted then you can with new postings to FI.
all the best
regards,
mohammed -
E-Mail problem after server upgrade
I had my email on my phone for over a year. It worked perfect... until the office upgraded the server.
After the upgrade I get the error message "Cannot get mail" "The connection to the server failed." I can access another co-workers email on my phone with the same settings, but not my own.
I have tried deleting the exchange account and setting it up again, but that didn't work. I tried deleting it, rebooting the phone, and then setting it up again.
What doesn't make sense to me is that I can access someone else's email, but not my own. It is very frustrating. The people that use Android phones are having no problems after the server upgrade.
Any suggestions?EAT729 wrote:
Any suggestions?
Yes. Contact your IT department. -
Server upgrade newbie questions
Hi Everyone!
So I work for a small-ish nonprofit and as I am researching information on what my to-be system is, I am running into a lot of questions. I have tried google-ing them with not much success. So I am hoping that all of your expertise might help
drive me in the right direction.
Mind you, I have only been with our organization for about 2.5 weeks, and it is all over the place.
Right now, we have approximately 90 PCs, both desktops and laptops, distributed around 12 counties. ~50% of these PCs are utilized by our staff, while the others are used by the general public for internet and document editing. We also have ~
30 smartphones that I need to manage at some level. I would also mention that we have PCs with XP, Win7, Vista, and Windows 8 (these PCs were all purchased by different people at different times, or donated to our organization). We are currently
transitioning to google mail, so I was also planning to use the google apps extension to integrate with AD. Right now, our local "headquarters" is where our servers are located, and the person who set our server up had installed SBS 2011. There
has been a domain setup, and all but one of the local PCs were added to it (minus the Win8 machine due to SBS limitations).
Because I am new to this, and the situation is a bit complicated (as you can see from above), I was really impressed with Server 2012 R2 because of some of the capabilities of it. The primary functions of the server are to provide a way for me to manage
all of the users (even the distributed ones), the PCs, and the devices (phones). The way that I understood this, is that DirectAccess could allow me to provide help desk support (I am the only IT person in our organization so I am wearing multiple hats),
removing the programs that were utilized by my predecessors (i.e. logmein). I am hoping that with them all added to the domain, I would also be able to ensure that they were being updated properly on a schedule. We also have multiple different
anti-virus softwares that have been deployed at different times on different OSs. I was hoping to be able to standardize this and be able to manage that as well.
So....the questions....
Because we are a nonprofit, we are members of techsoup and can get the software cheap enough, but I don't really understand the licensing, particularly the Remote desktop services CALs. How does this service differ from what I currently understand
as RDC. Do I need to get one of these CALs to be able to provide remote support to users/PCs?
How do I properly assess the software? Because I have never performed a server upgrade, or really messed with Server other than seeing the SBS console and being able to muddle through it easy enough, an I going to have issues when upgrading from SBS
2011 (backing up and redeployment)? The current Hardware is going to be on the low end of the min. sys. requirements. Is this going to be a huge issue considering the size of our organization?
Am I even on the right track?
My hope is to create a semi one time investment (for at least the next few years) so that the focus can be turned towards upgrading field equipment.
I would appreciate everyones thoughts and help (as I mentioned in the title, I am a newbie at server stuff).
Thanks in advance!"Because we are a nonprofit, we are members of techsoup and can get the software cheap enough, but I don't really understand the licensing, particularly the Remote desktop services CALs. How does this service differ from what I currently understand
as RDC. Do I need to get one of these CALs to be able to provide remote support to users/PCs?"
Your absolute best source of licensing information and clarification is to speak with a trained Microsoft licensing specialist. You can find one by starting your search at
www.microsoft.com/licensing.
Are all these devices owned by your organization? If so, dump XP as quickly as possible. You also might want to check into Office 365 instead of google apps, unless you like the fact that google reads everything you do. The combination
of Office 365 and Windows Intune might seem like a lot of money up front, but when you consider the significant amount of management time that is simply eliminated by them, they can be quite cost-effective.
It's pretty hard to 'assess' the software without any knowledge of applications needed, usage patterns, vendors, etc. If you do not feel comfortable performing the function yourself, find a reputable local consultant to come in and assist.
. : | : . : | : . tim
Maybe you are looking for
-
Can't connect to wireless network that works fine for other machines
I received my MacBook Pro last week (2.16 GHz) and I've been very happy with it so far. However, when I brought it home, I've had nothing but issues trying to connect to my wireless network. It's a Netgear, and you can read more about it at the follo
-
How much memory can i put in my imac
how much memory can i put in my new imac
-
Adding a digital time counter for split screen...
I am recording two events that I will be displaying as on a split screen. I need to have a digital "stop watch" timer at the bottom of each screen. Is there a way to create this on the computer without actually taking video footage of a timer? Any id
-
Upgrade to 3.1.2 and deletion of podcasts
I just installed the new OS 3.1.2 and all my podcasts were deleted. I am now in the process of trying to reconstruct them. I got the message cannot sync podcast with iphone as they no longer exists. Anyone else have this problem?
-
What are all the subjobs that get called for when a load is scheduled.
Can any one please tell me - "when I schedule a load to my Infocube or ODS or other data target, what are all the sub jobs/requests that get called for? Like if I go and see in Tcode SM37, I see several jobs running. Any input is greatly rewarded. Th