10.5.3 Troubles Galore
Boy, what nightmare this latest update to 10.5.3 has caused!
iMac G5 Trouble:
1) The LaCie 500GB USB drive that I used with Time Machine no longer shows up on the desktop. (already tried trashing the "apple.finder.plist file" from my home directory, but I still can't see the drive). It's making noise like it's doing something, but I can't see it anywhere except when I open Disk Utility, and then when I try to eject it, I get a message "Eject Failed: The disk "ST350083 AS Media" could not be unmounted. Make sure that all applications and files are closed on this disk."
Huh????
MacBook Trouble:
2) After installing 10.5.3 update (or what I thought was the update) I'm getting the blinking "?"during startup. NOT GOOD!
- Tried booting from the Leopard DVD to do Archive and Install but the HD doesn't even show up anymore!
- Tried restoring from Time Machine with the drive mentioned above, and still no luck, since no destination drive is listed to install it to. So now I'm stuck with a MacBook that won't startup and I don't know what else to try.
This is getting so frustrating! I'm stuck and it's keeping me up at night wondering what went wrong and how to get it fixed.
10.5.3 has caused severe problems on both my iMac G5 and my MacBook, and I'm at my wit's end. Any help or advice is appreciated.
Thanks,
Joel
Hi Joel, sorry to hear you're having problems.
1) Shut down your Mac and disconnect your firewire cable from both ends and let it sit about ten minutes then reconnect and try. Also, it is important to disconnect the AC power to your Mac, this helps to reset the FireWire port(s).
2 Start up in Startup Manager and choose your disk. If that doesn't work either, do you have TechTool Pro or DiskWarrior, both of which you could use to try to mount it?
You should try running the 10.5.3 Combo Updater on both Macs, assuming you get up and running...
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
Why did it happen? Probably some underlying corruption that went unnoticed until the update.
-mj
Message was edited by: macjack
Similar Messages
-
SMTP Header - RCF 2822 and extra CR (Carriage return)
Hi,
I have a customer with trouble reading emails from one business partner, all other emails comes through.
I have located the problem to an extra "\r" (Carriage Return 0x0d) i the incoming mail header.
According to RFC-2822 (http://tools.ietf.org/html/rfc2822):
* The body is simply a sequence of characters that follows the header and is separated from the header by an empty line (i.e., a line with nothing preceding the CRLF).
Part of a problem header:
Subject: KxxxxS + "\r\n"
X-PHP-Originating-Script: 508:ajax_final_step.php + "\r\n"
MIME-Version: 1.0 + "\r\r\n"
Content-type: text/html; charset=UTF-8 + "\r\r\n"
From: BxxxxxS <[email protected]> + "\r\n"
Message-Id: <[email protected]> + "\r\n"
Date: Fri, 1 Aug 2014 11:04:39 +0200 (CEST) + "\r\n"
With GWIA 2012 version 12.0.2 "03/25/13" running on SLES 11 SP1, the above header translate into:
Subject: KxxxxxS + "\r\n"
X-PHP-Originating-Script: 508:ajax_final_step.php + "\r\n"
MIME-Version: 1.0 + "\r"
"\r\n"
Content-type: text/html; charset=UTF-8 + "\r"
\r\n"
From: BxxxxxS <[email protected]> + "\r\n"
Message-Id: <[email protected]> + "\r\n"
Date: Fri, 1 Aug 2014 11:04:39 +0200 (CEST) + "\r\n"
This means that the header ends before "Content-type: text/html; charset=UTF-8" and the user gets an empty email.
The contents can been seen in "message source", but with all the header and HTML ****, and normal users can't decode the content.
Is this a Groupwise GWIA problem or a problem at the business partner?
The partner say outgoing email works with Gmail, Exchange, Office 365 and Notes - and will not fix.
If just RFC-2822 was more precise and did not contain the I.E. in "(i.e., a line with nothing preceding the CRLF)".
Kind regards
Uffe BagerHi.
That's an interesting issue. The problem evolves around the question if
a bare carriage return is "something" when in front of a CRLF or not.
One thing is certain though: The Business Partner sending those mails is
actively asking for trouble galore by completely without sense or reason
doing something within the headers that totally stretches the rules.
Personally, I'd sayfor good measurement, Groupwise should indeed
consider the bare CR before the CRLF as "something", aka should *not*
consider the following CRLF as theend of the header. But then somebody
else will most likely come aorund, break it and lcaim that it shouldn't
be doing this.
The real question is: Why is the code of the sender here doing this? Is
there any business casesending a line with a bland CR within the
headers? If not (and of course there's noreason to do this on purpose),
then this is just sloppy coding asking for trouble.
And the old argument "but it works with others" just makes me mad. I
usually reply something along the line that others also drive their car
completely drunk and very often don't get cought by the cops and don't
kill someone doing so. *Some* people start to think then. Rarely though.
Am 01.08.2014 12:46, schrieb uffbag:
>
> Hi,
>
> I have a customer with trouble reading emails from one business partner,
> all other emails comes through.
>
> I have located the problem to an extra "\r" (Carriage Return 0x0d) i the
> incoming mail header.
CU,
Massimo Rosen
Novell Knowledge Partner
No emails please!
http://www.cfc-it.de -
Is Cloud worth all the trouble it causes?
It's almost gotten amusing to see how much trouble the CC implementation is causing. The whole concept doesn't scale for anyone who doesn't have the luxury of (very) high speed Internet connections. Even for those who do, there have been difficulties galore - just browse the forums. (The countless posts and questions are only representative of users who took the time to write.) I suppose the ultimate decision is whether to applaud Adobe for being a pioneer in cloud technology or to condemn them for inflicting a technology in its infancy that has caused so many wasted user-hours. I lean strongly to the latter. Customers shouldn't have to navigate pitfalls that have appeared as a byproduct of Adobe's learning curve. I'm one of the many who run CC and CS6 Creative Suite side-by-side because CC has broken some Photoshop plugins. There's an important update to PS CS6, but I can't install it because of a poorly conceived installer assumption (that all unused language files would be left intact in the app). Rather than fix this, Adobe has resorted to the uninstall/reinstall nonsense, which is a known indicator of indifferent, vanishing support. (Another is using forums as a substitute for trained technical specialists.)
If one looks hard enough, there is the largely unpublicized site, http://prodesigntools.com/adobe-cc-direct-download-links.html. Here one can download Assistant-free installers for CC products. Even this grudging accomodation from Adobe falls short of the mark and illustrates Adobe's intransigence about their new way of doing things. The obvious solution would be for Adobe to provide installable media as an option. This provoked a long and interesting discussion on the same site, http://prodesigntools.com/adobe-cc-direct-download-links.html/comment-page-2#comment-44824. Read from Daniel's first comment on July 7th, 2013 to end. To summarize, it's about the illusory hoops one must jump through if their Internet connections are too slow or too secure to play in the cloud.
From my vantage point, there are two candidates for the 2013 Booby Prize, Adobe for its cloud-only stance and Microsoft for Windows 8 and the RT tablets. It's too close to call, but Adobe could get back on course a lot easier than Microsoft.After 3 months of reviewing the CC for Teams I have come to the conclusion that:
Adobe MAX was a smoke and mirror trick.
Adobe should be taken to court and sued for their con job called Adobe MAX.
Adobe should be taken to court and sued for charging extra for a team accounts and delivering the same thing as a single user.
Complaints need to be filed with the credit card companies that Adobe is stealing from their customers and the credit card companies should stop all payments to Adobe until can verify that they are delivering the products customers are paying for.
Tell anyone that is thinking of going the CC route to stay away from it, IT DOES NOT WORK! -
I just bought a mini-dvi-to-video adapter so I could use my TV as a display. More specifically, so I could use my VCR to record what's on my Mac's display. I also bought a headphone-to-composite cable adapter. I'm using a double-headed (is that one male or female? It's male, isn't it?) composite cable from the video adapter to the VCR. The problem is, it doesn't show up. The sound plays (and records) fine, but the video neither shows up on the TV screen nor records onto the tape. What's the problem? Both adapters are Dynex, my computer's a Late 2006 iMac (I think), the cable is WireLogic, and both the VCR and TV are Sony. Please help, thanks.
So if you eliminate the double headed splitter and plug straight into the TV, does the video still not show up?
FYI, there have been reports in the past of trouble with the Dynex video adapter. You may need to purchase the Apple OEM one. The Dynex may lack having a ROM inside of it with a proper EDID in the ROM. This is crucial to the Mac. -
Trouble Using Apple's Video Adapter
I am having trouble getting my eMac to work with the Apple Mini-DVI to Video Adapter. There are no directions telling you how to use it or to even get it to work. I want to use it to import videos from my Sony Hi8 camcorder and was told by Apple's Live help that this is what I needed to import video and make DVDs. How do I get this adapter to work?
Welcome aboard.
I think the adapter you have is for video output, not input. To input video to the eMac you need a firewire connection. Sony cameras typically have a 4 wire connector which is smaller than the 6 wire plug on the mac, so you need a cable that has a 4 wire connector on one end and a 6 wire connector on the other. Cameras often (but not always) come with such a cable. You also need a digital camcorder- not just Hi8., although Sony does make cameras that will do both. If you camera does not have digital output, you need a convertor box. -
Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2012) (Technical Specifications)
MacBook Air - model: MacBookAir5,2
1 1.8 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
APPLE SSD SM256E disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. Apple Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/WD +TURBO Installer.app
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USB-64HP (1.0.3) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.14) [Click for support]
/System/Library/Extensions
[not loaded] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
[loaded] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
[failed] com.apple.mtrecorder.plist
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[failed] com.apple.spirecorder.plist
[running] com.mcafee.ssm.Eupdate.plist [Click for support]
[running] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
TouchP-150M Application (/Applications/Canon P-150M/TouchP-150M.app)
iPhoto Application (/Applications/iPhoto.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
FUSE for OS X (OSXFUSE) [Click for support]
Java [Click for support]
MacFUSE [Click for support]
NTFS-3G [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
Destinations:
My Passport Edge for Mac [Local]
Total size: 499.94 GB
Total number of backups: 27
Oldest backup: 2013-01-31 21:15:26 +0000
Last backup: 2015-05-02 11:33:09 +0000
Size of backup disk: Adequate
Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% fontd
2% VShieldScanManager
0% taskgated
0% notifyd
Top Processes by Memory: ℹ️
745 MB Google Chrome Helper(8)
439 MB kernel_task
246 MB VShieldScanner(3)
160 MB Google Chrome
127 MB Finder
Virtual Memory Information: ℹ️
130 MB Free RAM
3.87 GB Used RAM
0 B Swap Used
Diagnostics Information: ℹ️
May 2, 2015, 09:30:08 PM Self test - passed
May 2, 2015, 08:52:59 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
May 2, 2015, 09:28:53 AM /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
May 1, 2015, 05:45:24 PM /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
May 1, 2015, 05:38:54 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
May 1, 2015, 05:38:43 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
May 1, 2015, 05:38:32 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
May 1, 2015, 05:38:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
May 1, 2015, 05:38:10 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
May 1, 2015, 05:38:00 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
May 1, 2015, 05:37:49 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
May 1, 2015, 05:37:38 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
May 1, 2015, 05:37:27 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
May 1, 2015, 05:37:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
May 1, 2015, 05:37:06 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
May 1, 2015, 05:36:55 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
May 1, 2015, 05:36:44 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
May 1, 2015, 05:36:33 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
May 1, 2015, 05:36:22 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
May 1, 2015, 05:36:17 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
May 1, 2015, 05:36:01 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
May 1, 2015, 05:35:50 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
May 1, 2015, 05:35:39 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
May 1, 2015, 05:35:28 PM /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
May 1, 2015, 05:20:29 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
May 1, 2015, 04:55:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
May 1, 2015, 02:53:58 PM /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
Apr 20, 2015, 09:31:20 PM /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway. -
how do I trouble shoot this?
emanwine wrote:
Got it to connect and it is my back up. ...
Good News.
If this is your only Backup would suggest getting a New EHD and creating another one... Preferably a Clone if you don't already have one.
http://www.bombich.com/
Can never have too many Backups... -
I am having trouble printing to an Epson XP600. We have replaced the printer and we are still having the same problem. When I try to print from Excel, only the color prints. Any suggestions?
Has anyone else had issues not being able to print black (such as a document)? My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?
-
As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I purchased the student version of Photoshop and Lightroom a few weeks ago
I have a 19 digit code that i had to scratch to get, a 30 digit number under the bar code, and a 6 digit authorization code that seems to be completely pointless. I started off putting in the 19 digit code with all my other information, but it wanted 24. so I filled in the rest with zeros. Then it starts giving me so much trouble I don't think I'll ever attempt to get photoshop again.You may want to check all about serial numbers and redemption codes here: Find your serial number quickly
-
Trouble accessing photos.
Hello! Need help! Having trouble accessing photos from Adobe Photoshop Album Starter Edition 3.0, I had a free trial but never registered the program because I was not using it. The other day I was taking pics off a Canon camera, & they automatically loaded into that site. I selected cancel several times, but the program did not respond. Once they completely loaded in, the program asked if I wanted to erase photos from the camera, I selected no but it started erasing them, I was able to stop it but 44 were erased off the camera. I can see the photos in the program but can not access them since I never registered. I tried to register now but received email saying that program has expired. So how do I get my photos? Please help! The photos are not mine, I was loading them from a friends camera, & they are important vacation memories to her! Thanks! Ruth
When you click on one of the thumbnails do you see a blank window where the full sized image? Or do you see this in the window:
In either case make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Trouble Opening Illustrator and Photoshop CS2??
When opening Adobe Illustrator CS2 I receive a Windows Box showing Adobe Illustrator: Illustrator.exe - Application Error The instruction at "0x003c197d" referenced memory at "0x000000000". The memory could not be "read". Click on OK to terminate the program.
I am also having trouble accessing Adobe Photoshop CS2. When I open the program it simply stays in one sequence as a loop and does not completely open.32 bit Windows XP
I also tried uninstalling and re-installing the full program and it still has the same problem.
I even checked my ram by moving a single memory card from one slot to the next to see if that was the problem but still the same error messages. -
Trouble with Toshiba built-in webcam: "unable to enumerate USB device"
I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature -
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael -
Trouble installing the apps after downloading Adobe Creative Cloud
I am having trouble installing the apps after downloading Adobe Creative Cloud. The following Error messages show up:
ERROR: Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
ERROR: Failed to repair Microsoft Visual C++ 2012 Redistributable Package (x64). Please try repairing it by double clicking on the executable at "C:\Users\KATHER~1.CDA\AppData\Local\Temp\{63EDD438-B4D0-424C-B05A-7990C09D955C}\Illustra tor_1Third party payload installer vcredist_x64.exe failed with exit code: 2147942750
Maybe you are looking for
-
I set up my new iPad under my daughters ID because her's is attached to my email. Tried to rent a movie from iTunes. Said I had to answer security questions since it was my first purchase. She didn't remember the answers. So it locked. She reset her
-
Is it possible to directly connect two Xserves with a Promise VTrak E610fD via Fibre?
I have two Xserves and I'd like to connect them with a Promise VTrak E610fD. As this storage has two controllers, I'd like to connect both Xserve with both controllers. Is this setup possible? Can I access (read and write) the same disk array with bo
-
How do I change content on Photo Stream ?
I would like Photo Stream to show all photos in an ongoing slide show NOT just recent photos. How can I make that change ? Thank you, in advance, for the assistance.
-
8.1.7 Select a Points Coordinates.
Please excuse this newbie question. I am using Oracle 8.1.7. I have a two dimensional point table and all I want to do is now extract the X and Y coordinates from each point. How do you do this? I have looked through the forum and seen reference to S
-
I am using the PL/SQL function body returning colon-delimited string with the headings under Report Attributes. Works fine, except... When I want to style my headings with CSS styles using SPAN style=color:red and stuff like that, the colon (:) in th