10.5.3 Update on Macbook Pro Hangs -- won't install

I am trying to install the 10.5.3 MacBook Pro Update from Software Update. The update downloads successfully, then asks for restart. I confirm, and then the screen clears, and I get a installation progress dialog that hangs indefinitely saying "Configuring Installation". No progress at all -- it just stays there. A hard boot is required, after which I can try the whole cycle again, with the same results.
I've tried this three times, same result. I've used my install disk to repair disk and repair permissions (there were no errors), still no change. I have no peripheral devices attached to my computer except USB keyboard / mouse and an Apple Cinema display connected via the DVI port.
If anyone has an answer / ideas, I'm all ears. Work just came to a grinding halt.
B

Go to the Apple website and download the update directly from there and install.
http://www.apple.com/support/downloads/
Downloads using Software Update sometimes get corrupted.

Similar Messages

MacBook Pro Retina won't install windows 7 64bit

Hi guys, i'm tryng to install windows 7 64bit but no success till now. I'm using an updated version ( service pack 1 integrated) when windows loads i can't install it on the bootcamp partition because it says"windows needs an ntfs partition to install" . Then i cancel that partition, create one new ntfs one, and try to install.... then windows tells me "Impossible to create a new system partition or locate an existing system partition. For further information, look at the program's registry files"
It seems to be an error caused by a defective driver of the controller of the hard disk.... so the controller of the ssd. Or is it something else? how can i install windows via bootcamp on the new macbook pro with retina display?

you format the FAT/MSDOS to NTFS inside the Windows installer.
Windows installer: Advanced Options tab.
You don't create, you just use the one "BOOTCAMP" that was created by Boot Camp Assistant.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

The recent firmware for Macbook Pro (2011) won't install

MacBook Pro SMC Firmware Update 1.7
I tried to install this but all I got was the gray screen of doom. After 12 hours of the gray screen, unplugged and let the battery run down. Macbook booted up (yay) and the software update says it still needs to be installed.
Should I just skip it and play the rare odds?
Thanks.

I had this same problem, but stopped it after 2 1/2 hours. I did a hard shutdown (held down the power button until it powered down), waited a few minutes and then started it back up. Thank goodness the MBP came back. Must be something wrong with this update. Wonder if Apple knows about it? Do their techs watch this forum?
First time I've had problems like this installing an Apple update.

Macbook pro 13" won't install OS X 10.4 after harddisk erased and dvd will not eject!

After backing up the machine, I took what I thought was the correct installation disk and booted from the CD/DVD. I erased the hard disk using the Disk Utility. Then I tried to reboot to install the original operating system. After several hours I received the message: Cannot install Mac OS X on this machine. The computer was running 10.4.3 before I erased it. I don't understand why the restore to factory settings didn't work. Now I have another problem. The CD/DVD does not eject. Without an operating system on the hard drive, it automatically boots from the CD/DVD and will not eject the boot disk!
What do I do? How do I get the CD/DVD out? How do I find a good disk

Hello, hold the mouse button down while booting up to eject it.
The original Disc would be gray.
If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
http://www.chipmunk.nl/klantenservice/applemodel.html
http://www.appleserialnumberinfo.com/Desktop/index.php
How to find the serial number of your Apple hardware product...
http://support.apple.com/kb/HT1349

I updated to MacBook pro last night and now safari won't open

I updated my MacBook Pro last night and since I did this I can not open Safari. It crashes and sends a report to Apple. Not tech smart enouh to figure it out can anyone give me simple suggestions?

ted39 wrote:
I updated to OS 10.8.2 and now Pages won't open
Please elaborate on what exactly you mean by it "won't open".
Do you try to launch it and get an error message from the Finder (for example, something like "This application is damaged and cannot be launched....")? Does an icon for the application ever appear in the Dock when you try to launch it? Does it start to launch and then immediately crashes (Finder will display an "unexpectedly quit" dialog)? Or does it start to launch and never seems to "finish" launching (in other words, it basically hangs and is unresponsive)?
If the application crashes, please post the contents of the crash log here.
Otherwise, if the application seems to be hanging, can you, before attempting to launch it, open the Console.app application (it's in the /Applications/Utilities/ folder), and see if anything is reported when you attempt to launch it? If so, please post it here.

After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden

Latest update for MacBook Pro causing spin issues :( Any suggestions?

The Latest Update for MacBook Pro is causing my computer to hang....I hate updating for this reason...seems it always happens...Any suggestions?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

Have you tried starting in Safe Mode and see if the slowness still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
Reboot normally and test.

When I updated my macbook Pro to Maverick, I lost I Photo. How do I get it back to manage my pics?

When I updated my Macbook Pro to Maverick, I lost I Photo. It seems as if my pics are still on the laptop, but I have a really hard time finding them. I no longer have I Photo. Can anyone help me in getting that application back and putting my pics back in it? I loved the faces feature. Thank you!

Run the >software update>iPhoto
If you have a legit copy of of iPhoto you are eligable for the Mavericks compatible version. Look for it in your applications folder along side the older versions.
If not purchase it on the AppStore to regain access to your iphoto library as you knew it.

I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?

I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?

I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?

I Did my usual software updates and it downloaded n asked me to restart so I did, and now it's not starting up

I updated my Macbook Pro last week to Lion. I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!

I updated my Macbook Pro last week to Lion. I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!
Please! I need an answer fast!!!!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

ITunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution?

iTunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution? And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to be a good company, but it's becoming just another crappy screw-the-consumer corporation.

It would help to know versions here. I'm guessing your update put an older version of something into a place where a newer version of something iTunes put in there existed. Updating an earlier OSX version to 10.6.8 is still only updating to system software that was issued several years ago. If you are running some slightly newer version of iTunes issued subsequent to 10.6.8 and you just updated to 10.6.8 you may have put in an older version of something iTunes uses. Anyway, I'm guessing here until we know exactly what you did.

10.5.3 Update on Macbook Pro Hangs -- won't install

Similar Messages

Maybe you are looking for