10.5.3 Update- Window redraw problems in Finder and all Apps

Hallo there. After installing the update on my MacBook Pro 2.4GHz I am getting irritating redraw problems in all Apps with scrolling possibilities incl. the Finder. Especially Safari. Triple stuttered lines make it impossible to read anything.
On top of that the permissions are cocked up. The System is telling me not to transfer an iWEB website to a USB stick cos I don't have the privileges. Virtual Sick just splattered over my screen.
This ultra expensive machine only has its justification because it is a tool and I want to WORK with it. Not long and this bean-can is flying out the window.
This is an ultimate pain. I wish the updates would work. It's just so unprofessional. So "Windows". I wish Atari was still building computers.
Is anyone out there that knows anything about this?
Would appreciate any help.
Thank you.

Have you tried doing anything? Try running Disk Utility
Disk Utility
http://docs.info.apple.com/article.html?artnum=302672

Similar Messages

Win 8.1 update - sound popping / glitch in MetroTube and all APPS when scrubbing video

My phone Nokia 1020 was working fine. I then downloaded the over the air update for Win 8.1 and Cyan on Thursday 7th August from O2.
Since then I have experienced a loud popping / static noise when playing video in all apps (except StoryTeller)
Using built-in speaker:
When I play video in any App with a video scrubber and I scrub the time-line and realise the scrubber it makes a loud click or static pop.
It happens in everything including:
Mytube
Metrotube
Tubepro
Photos App (i.e Microsoft one - playing a recorded video in they all now have a loud click / static pop)
Xbox Video App (i.e Microsoft's own App)
Using Headphones:
There is no load click (It plays how it used to)
The odd bit is using the speaker and playing music tracks (mp3s etc) and scrubbing there is no static popping click it plays fine.
Video In Web Browser Fine:
Playing YouTube Videos in the web brower there is no popping / static click noise.
I have just downloaded 'xVideo' App and played a HD Music video in it and used scrubber and there is NO loud click.
Sound Glitches in Audio Clips at end of recordings in all these Apps:
Babbel - Learn Spanish
Coolang - Learn Spanish
Zeemish - Learn Spanish for Beginners
its really annoying and makes trying to listen and remember pronunciation of words difficult and frustrating. Phone was ok before Microsoft Windows 8.1 update now have this issue and issue with static build-up causing popping when fast forwarding through
videos. :( I am feed up
Conclusion:
This is software bug? please can anyone help/advise me on how to fix this and if anyone else is having same glitch with 8.1 update :(
All I can think of to fix is to somehow downgrade to Windows 8 if that's possible? :( *update its not possible using Nokia Recovery as it puts back Win 8.1.
It is a Software bug introduced in Windows Phone 8.1 update. It effects everything! including
Microsofts own Video Xbox App and
Photo App. See other people frustrations on this issue, its been going on since April!!!! please can you fix this is ruining my Windows Phone experience:
MICROSOFT / NOKIA SEE LINKS TO VIDEO OF SOUND POPPING ISSUE BELOW !!!!!
http://forums.wpcentral.com/ask-question/296892-popping-sound-when-navigating-through-media-lumia-1520-a.html
http://forums.wpcentral.com/windows-phone-8-1-preview-developers/278439-must-read-lumia-920-owners-running-8-1-whatsapp.html
Microsoft need to fix this Video Popping urgently, I have tired to want to like Windowsphone but they keep going backwards and I am loosing faith.
If is not fixed soon i.e next few months I will never buy a Windows phone again and will recommend the same to friends and family. I had so much hope and expectation for 8.1 update :( love the Notification bar and battery icon but I can't live with
all this. :(

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Updated iPad 2 to 7.1 and all apps are missing from iPad

I updated iPad 2 to 7.1 and iPad is non-responsive and missing all my apps

Hi Happy25y!
Here are some basic steps for troubleshooting your iPad:
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
You may need to restore your iPad if you cannot get it to respond. Here is an article with the best way to restore an unresponsive iPad:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
You can re-download your purchased apps by following the steps in this article:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for using the Apple Support Communities!
Cheers,
Braden

Since Updating to 10.9.5 Safari and the App Store drop internet connection periodically while other apps Mailplane and Epic Browser continue to work ?

Hello.
Since Updating to 10.9.5 Safari and the App Store drop internet connection periodically while other apps Mailplane and Epic Browser continue to work ?
Never had this problem previously running a Macmini Server 2010 with the latest Mavericks Updates
Tried reinstalling over my existing OS and seemed ok until I once again updated to the latest security and Safari updates
Any ideas ?
Using ethernet but wireless acts same,
Cliff

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

I can't reset my iTouch. Whenever i try the power off just keeps showing. Just updated iOS to 4.3.3 and all the apps just won't work

Whenever i try the power off just keeps showing. Just updated iOS to 4.3.3 and all the apps just won't work

Did you try to reset your iPod? The description of what yu did was not clear. To reset:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
Next would be to restore the iPod from backup and if problem persists restore to factory defaults/new iPod.

I updated my ipad 2 to ios5 and now apps won't open they just blink. What should i do?

I updated my ipad 2 to ios5 and now apps won't open they just blink. What should i do?

If it is the third party apps crashing - try downloading another app - any free app is fine. See if that resets the other apps.

I have just updated to the new iOS 6, and all my contacts have disappeared? Is there a possible solution to get them back?

I've just updated to the new iOS 6 and all my contacts have dissappeared, is there a possible solution to bring them back, I really need them back. Thanks in advance.

You tried clicking on "phone" then "groups" and "Show All Contacts"

My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data

My itunes says that my ipod is synced with another library when it is not and cannot update or sync without wiping it and all its data
Can anyone help me

Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
All media content will be erased during the first sync, but you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

I just updated my iPhone to 5.0 and all of my apps are gone. How do i get them back?

I just updated my iPhone to 5.0 and all of my apps are gone. How do i get them back?

If you have failed to make sure that any apps purchased on the iphone were transferred to your computer before updating, then you will have to redownload.
Open itunes store, click Purchased, under Quick Links.

I update my OS to Mount Lion and all my .docs ( microsoft office for mac) can't be read or open. Any advice on to what app should I get so I can open or transfer to so I can open em?

I update my OS to Mount Lion and all my .docs ( microsoft office for mac) can't be read or open. Any advice on to what app should I get so I can open or transfer to so I can open em?

What program did you use prior to the updade? Did you updrde that program when you updaded the OS?

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

"KERN_INVALID_ADDRESS at 0x000000ac" I am facing this issue after updateing my device to ios 5 and my app crashes with this error

My Phone Just Shuts Off and won't come back on unless hooked to a power source. I've got all the updates and all apps are closed out.

My Phone Just Shuts Off and won't come back on unless hooked to a power source. I've got all the updates and all apps are closed out.

Most likely a bad battery.

Updated my iphone 3gs last night and all contact info is gone.

Updated my iphone 3gs last night and all contact info is gone. Messages, notes and all other sections are intact----just no contact info.

You can resync your contact via Itunes, just go to the contact tabs and check to sync.

Odd window redraw problem...

This just starting happening so I'm wondering if anyone else is experiencing this.
In Dreamweaver CS5, I normally work on a few pages at a time, all in tabs and I use split screen to see the code and design. Now, if I'm on one tab and then click on another tab to switch to that page, it does switch, but the window goes grey until I click a second time on the tab, then the window refreshes and I can see the content.
I'm attaching an image of what it looks like when I say the screen is grey:
Then on the second click, my window redraws to this (I had to blur the content):
I can't seem to find a setting that would have done this and the only change I've made to the system is clear the font cache, but I can't imagine how that would affect it.
Any help would be great.

Have you tried starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)
If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.

Dumb Q: problem with Find And Replace window in Flash 8

Dear Flash Group,
apologies if this is trivial, it's my first day using Flash.
I downloaded a Flash project from
http://www.flashorb.com/articles/benchmark_files/flash-benchmark.zip.
This
flash calls into a web service at localhost:8080. I used the
'Find and
Replace' window within Flash Professional 8 to locate the
string
'localhost:8080' and replaced it with plain 'localhost'.
However, when I 'Debug the Movie' (Ctrl-Shift-Enter), it
still tries to
access port 8080! Obsiously, my replace command did not do
what I thought it
would do. I opened the FLA file in a binary editor, and saw 4
more
references to 8080, One if them in 'Properties' of a
WebServicesConnector,
but I cannot figure out how to find the other occurences.
Checking on google, I see lots of people having similar
problems, but no
solutions
Any ideas?
Regards, /george
PS. What do you guys do for code completion - is there a tool
that would
bring Flash on par with an professional IDE?

george,
> when I 'Debug the Movie' (Ctrl-Shift-Enter), it still
> tries to access port 8080! Obsiously, my replace
> command did not do what I thought it would do.
Agreed.
> I opened the FLA file in a binary editor, and saw 4
> more references to 8080, One if them in 'Properties'
> of a WebServicesConnector, but I cannot figure out
> how to find the other occurences.
Might they be the result of that WebServicesConnector
reference?
> Checking on google, I see lots of people having
> similar problems, but no solutions
That's really odd, actually. I'm on these boards every day,
and I've
never heard of this issue. I don't *think* the Find/Replace
dialog visits
panel contents, such as the Component Inspector panel, but I
wouldn't swear
to that.
> What do you guys do for code completion - is there
> a tool that would bring Flash on par with an
professional IDE?
Well, Flash is a professional IDE, of course. By definition,
if you pay
for something, you have acquired a professional product or
service. I know
what you mean, though. Flash itself rocks, but the Actions
panel can be
glaringly weak. Personally, I use SE|PY to edit ActionScript.
http://www.sephiroth.it/python/sepy.php
Sorry I can't speak to your other issue. :-/
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

10.5.3 Update- Window redraw problems in Finder and all Apps

Similar Messages

Maybe you are looking for