10.5.3 Won't Install

I recently downloaded the OS X 10.5.3 update on my iMac via the automatic "Software Update." Everything proceeds as planned, I hit "Install" and am directed to restart the computer...
... and then when the "galaxy" background appears and the progress bar starts filling up (above the bar it says "Installing 1 Item" and below it says "Configuring Installation") but it stalls right around the "n" and "s" in "Installing." I left the computer on overnight and woke up to find no progress.
Any suggestions?

Let me add to that. I need to reinstall Leopard because all of the additional programs like iPhoto do not install; after the install, when I try to sync my iPhone, iPhoto attempts to open and then a message comes up that says it is not compatible with Leopard.
I want to reinstall Leopard, but am not sure how to do an override. Help
Scriptgirl

Similar Messages

Windows Vista won't install Ipod

Latest version of Itunes 7.4.2 has been installed, unfortunately Windows Vista has located Ipod mini in "other devices" in "Device Manager", but it won't install the Ipod. I've reinstalled Iteune three times and searched the Windows Vista disk, but with no luck.
I'm on the verge of selling the ipod - any advice would be welcome.
Thanks

I suggest either getting a Mac or going back to Windows XP because Vista is known to have these problems.

My new blank hard drive won't install OSX from the disk?

For some reason my Mac book pro won't install OS through the install cd or through the flash drives. It will load the disk but then freeze when I click install. It won't load through the USB either. I have done multiple diagnostics at the mac store and they tell me that my hd is bad. Twice the hd was fresh out of the box and installed that day. I spoke to a supervisor via phone when I called apple care and he told me that unless I have all apple parts in the computer they can't accurately diagnose the issue. It feels like they're trying to con me into paying double for a "apple hd". What can I do to get my computer working?

I would purchase an external USB enclosure for the HDD. With the HDD in the enclosure, install OSX and then mount in your MacBook. If you continue to have problems, it could be a faulty internal SATA cable.

ITunes won't install (at all) on my Windows 8.1 64 bit computer

I've tried downloading iTunes for Windows 8.1 64-bit computers and it won't install on my machine. I did everything like I think I was supposed to ... but nothing happens. In addition I've tried connnecting my iPhone 5S to a USB port ... nothing good happens. My computer recognizes the iPhone but it won't do anything with it. Also I've tried the suggestions from "windows 8.1 itunes wont recognize iphone: Apple Support Communitites" which entertains that I can open control panel ... find Device Manager and try to install new driver software from my disk ... with the suggestion that I 'browse' and find "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. ... and "Apple" does not exist under Common Files of either "Program Files" or "Program Files (x86)"
So now what????

What is the full text of the error message?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Creative Cloud Desktop app won't install error 207; Adobe server?

Is there a problem with some of Adobe.com servers? My employer just purchased a CC subscription for my work Mac, and the CC Desktop App won't install. I've restarted my Mac, quit all Adobe products, redownloaded the DMG file (creativecloudinstaller.dmg), and checked to make sure my firewall is off. But I still get an error message #207. My DNS servers are set to the same ones that other Macs in my group are set to, and they have CC on their Macs.
I don't know if it's related, but I can't load "adobe.com" in my browser, either. All other webpages are fine, including (obviously) this forum.
I am using OS 10.8.5, connected via Ethernet, and my browser is Chrome.

Thank you for your help, Ned. I also called Adobe help via phone, and he confirmed that my company's server needed to whitelist several Adobe sites. The company had revised their servers not long ago, and evidently did not transfer their old whitelists (which is why my coworkers had previously been able to access Creative Cloud). The phone support person emailed me a helpful list that I could forward to our company's tech support center—but the link you supplied in your response was also perfectly relevant.

CS4 master Collection won't install on XP

After paying the big bucks for this CS4 Master Collection software, I can't get it to install. I have 1.5 gig of ram, all slots full. Will it not install with that? The install won't let me install on a drive with 123 gig of free space, the install pop-up says there's not enough room please change location. I change it to another drive with 197 gig of open space and it won't install.
Customer service is closed until Monday...I'll be back in class and don't get out until 8pm every frickin weekday.
I'm working on a sony the runs 3.20 ghz with the 1.5 gig of RAM. I just reformated the harddrive but windows takes up the C: partition but the extention is 123 gig, and I have several other drives (with hundreds of gigs open) I've tried to put it on....it says they're too small.
I've tried to install the trial version and it does the same thing. I'm at my wits end with this!
If there's only one out there willing to help me I would really appreciate, because Adobe doesn't seem to give a fig about helping me.

How much free space is on the C:/drive? Without a lot of room you'll have a hard time installing any program even if you install it to a different drive. Windows needs lots of free space on C: for installing applications.
If you have little free space, then whoever set up that machine did a very poor job of it. There is no benefit at all to installing applications on a different drive than the operating system.
Bob

OVI Won't install on my XpressMusic 5730 (hangs at...

I am trying to install the OVI application on my phone so that I can download apps and games but it won't install. After the install it starts up and I see the loading screen but that is all that I get. I do get an icon for OVI but if I try to use it it just does the same thing. Does anyone know how to resolve this? I have tried doing a hard reset and that does not resolve the issue at all.

Hi Smileyfrog,
Could you be more specific about your issue.
Which operating system do u use?
Which model handset you use?
Which firmware version do you have in your mobile? ( *#0000# will reveal the details)
Are you trying to connect thru cable or thru Bluetooth?
Which version of OVI suite you use?
Go to OVI suite -> help -> About nokia OVI suite -> System information. Paste the information...
Please attach a screen-shot of the issue which you are mentioning.
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

I am trying to install Mavericks on my McbookAir, but it won't install, saying that my hd is used for time machine backups. I have an external HD connected to my mbAir that I'm using for time machine.

2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).

I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD :-( . If it were, I'd delete it!

TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
 Cheers, Tom

Application (WMF 3.0) won't install during maintenance window, but will install when there is no maintenance window

Hi All,
I'm just getting into the Application model in SCCM 2012 R2 and I like what I see so far, but i'm running into an issue. When i set up an Application for WMF 3.0 with a prerequisite of .Net 4.0 and deploy it to a set of test systems that do not have
any maintenance windows applied to it, it works great. If it doesn't have .Net 4.0 it installs both that and WMF 3.0 and reboots. If it already has .Net 4.0, it will skip that and just install WMF 3.0 and reboot.
However, if i deploy it to systems that have a maintenance window applied, the application recognizes that it needs .Net and WMF 3.0 or just WMF 3.0, but it never actually runs.
Here is the applicable entry from the appintenteval.log, and i've bolded the line where it shows that WMF 3.0 is not installed
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Title = WMF 3.0, Direct seleted dependencies = ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 title=.Net
4.0,    AppIntentEval   4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 :- Current State = Installed, Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = .Net 4.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/Application_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/RequiredApplication_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NonCompliant, Applicability = Applicable, ResolvedState = Compliant, ConfigureState = NotNeeded, Title = ApplicationIntentPolicy
AppIntentEval   4/24/2014 8:20:19 AM   1768 (0x06E8)
and here are the entries from the AppDiscovery.log that are relevant:
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558" AND Revision = 7)"   AppDiscovery
4/24/2014 8:20:19 AM   2776 (0x0AD8)
    Performing detection of app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.   AppDiscovery   4/24/2014 8:20:19
AM   2776 (0x0AD8)
+++ Discovered application [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, Revision: 7]   AppDiscovery   4/24/2014 8:20:19 AM   2776 (0x0AD8)
+++ Detected app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.   AppDiscovery   4/24/2014 8:20:19 AM
2776 (0x0AD8)
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66" AND Revision = 12)"   AppDiscovery
4/24/2014 8:20:19 AM   2508 (0x09CC)
    Performing detection of app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.   AppDiscovery   4/24/2014 8:20:19
AM   2508 (0x09CC)
+++ Application not discovered. [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, Revision: 12]   AppDiscovery   4/24/2014 8:20:19 AM   2508
(0x09CC)
+++ Did not detect app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.   AppDiscovery   4/24/2014 8:20:19 AM
2508 (0x09CC)
   ActionType - Install will use Content Id: Content_c6b448d0-7b59-4796-bb29-3f7fbfa6e70d + Content Version: 1 for AppDT "WMF 3.0" [ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66],
Revision - 12   AppDiscovery   4/24/2014 8:20:20 AM   2508 (0x09CC)
I have a 2 hour maintenance window applied to this system. From the serviceWindowManager.log:
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
No Service Windows exist for this type. Will check if the program can run in the All Programs window...   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
        Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14
08:20:00   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
            Duration is 0 days, 02 hours, 00 mins, 00 secs   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
FindBiggestMergedTimeWindow called with TimeStart=04/24/14 08:20:21 and TimeEnd=04/24/14 10:20:00   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
        Biggest Chainable Service Window for Type=1 not found   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
I'm not sure what else to try next and appreciate any help anyone can offer.

Thanks. I checked that setting and i have it set to false, so i don't think that's it.
I've done a little more experimenting. I've changed my maintenance window back to 30 minutes. Prior to the MW opening, i'll run an application evaluation deployment cycle on the system. It will show the system as required WMF 3.0 but since
the MW isn't open, it won't install at the time.
When the MW opens, i'll watch the ServiceWindowManager.log and it sees that it's a 30 minute MW and that the run time is 15 minutes but it still says the program can't run:
ActiveServiceWindow has 1800 seconds left   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
OnIsServiceWindowAvailable called with: Runtime:900, Type:6
ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
        Biggest Active Service Window for Type=6 not found   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
Program cannot Run! Setting *canProgramRun to FALSE   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
OnIsServiceWindowAvailable called with: Runtime:900, Type:2   ServiceWindowManager   4/24/2014 2:22:32 PM   816 (0x0330)
If however, i kick off another application evaluation deployment cycle on the system during the open MW, the deployment kicks off right away and finishes.
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:22:32 PM   2940 (0x0B7C)
OnIsServiceWindowAvailable called with: Runtime:900, Type:3   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
No Service Windows exist for this type. Will check if the program can run in the All Programs window...   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
        Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14 14:20:00   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
            Duration is 0 days, 00 hours, 30 mins, 00 secs   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
ActiveServiceWindow has 1571 seconds left   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
This is not the behavior i would expect. I would think that if the client knows it has a pending application deployment that is required, when the MW opened up, it would start the install immediately or close to the beginning of the MW. It shouldn't
need to have an application evaluation deployment cycle kicked off during the MW.

24" iMac won't install any 'large' Apple software updates from the internet

I am having a serious issue with my iMac and neither the people on the phone at Apple Care or the 'Geniuses' at the Genius Bar have been able to assist. So, maybe someone here can:
First - here is the background information about what happened and what I've done:
A few weeks ago when the new iTunes 10 came out I went to upgrade. The upgrade failed it said. So, I thought perhaps Apple was having issues with the new software or something. So, I thought - Ok, I'll give it a day or two.
I come back and try again from Apple.com - no luck. Hmmmm - well, I just happened to see my 'software update' icon pop up and there was iTunes. I thought "Great! Now I'm sure it'll install!" No luck.
So, I think - well, perhaps I've done something to corrupt my profile. So, I create a new profile and try again. No dice.
So now I'm really confused and figure - ok, let me try a partition and I'll try again. Still nothing.
Finally I figure - ok, something is wrong here. So, since nothing is working I backup my music and important files and wipe out the hard drive and start over. No luck. And, in fact - since I had gone back to 10.5.4 or whatever - software updates needed to install to get me back to 10.5.5. Those wouldn't install through software updates OR when downloaded from Apple.com - Smaller downloads like, flash, java, firefox, etc - all download and install without issue.
I decided to engage "Apple Care" and they call me at the time I specified and we begin to do some tests on the hardware and everything came back ok. We tried from Apple.com and software updates again - still won't install the software. Keeps coming back with "Software installation failed" something about the package installer was corrupted during downloading.
The guy at Apple care thinks perhaps its my network corrupting something. This begins to make a little sense and I think, maybe he's right. My wireless router isn't that great so, maybe I'll just go replace it. However, while I'm checking out I begin to think that maybe its NOT my wireless router - because I do have 2 other computers in my house who haven't had issues downloading anything. So, this is unlikely. But, I didn't like the wireless router anyway - so I went ahead with the purchase.
I get it home - set it up and try again. STILL not working. So, I make an Appointment at the "Genius Bar". I take it in - show them the screen shots of the errors and we get started. They try to do the install of either iTunes or the combo update on THEIR network - still won't work. The genius thinks I have a bad HD and takes the computer for 2 days to look at it.
I finally get to go pick it up - excited that I'll have my iMac (which I use for work) back and functioning again. I go pick it up and they decided that it wasn't my hard drive - but likely my RAM. They couldn't prove it was the RAM but figured since I bought the RAM after I bought the iMac that this must be the issue (even though it was up to exact Apple standards and was from Crucial). So, I think - well, while I have a blank slate I'll go ahead and install Snow Leopard. So, I pick up Snow Leopard and get new RAM too and go home to install.
I get the computer home, put the new RAM in, install snow leopard and get ready to work! After snow leopard install is done - it has some new updates it needs to install. And the update FAILS to install again. Oh, and they never replaced the HD.
So, I call Apple Care again - they have no clue. They suggest making an Apple Genius Bar appointment. So, I take it in again. They run diagnostics on it from their 'Triage' external hard drive and everything checks out. He says its probably the hard drive (same conclusion they came to the first time) and said that they would replace it.
I get the computer back - take it home. Everything is up to date. All the software updates were back in place including iTunes 10. However, I still want to test and see if I can download iTunes and/or do updates. So, I uninstall iTunes and download it again. Same problem. STILL won't install any large software downloads. But, again - Smaller downloads like, flash, java, firefox, etc - all download and install without issue. Just no core Apple updates or things like iTunes will download and install on my iMac.
I then took it to a friends house - set it up on his network - same issue.
So to sum up:
I have re-imaged the hard drive several times
I have replaced the ram
I have replaced my networking hardware (even though other machines on the network have no issues)
I have taken it in twice to the Genius Bar and they still haven't fixed it
The Problem followed the machine and exhibited the same issues in store as it did in my home (so we know the problems stays with the machine)
I have tried it on yet a 3rd network and the issue still exists
The people at the Genius Bar told me that If I still have issues then its with my network - even though its been proven it wasn't.
Its only larger downloads like Combo Updates and iTunes that won't install.
Any ideas? Sorry for the long post but its been quite an ordeal.

Yes, I have tried the updates directly from the Apple website and a different issue occurs. When I do that I get various different errors - the most common saying 'Codec overrun'. This has happened both before and after complete software OS reinstalls (Completely wiping the HD clean).
I did a video of my issue on my iPhone. I had to cut it and compress it to get it off my phone without syncing (because I can't sync it since I can't get iTunes installed now). So, its about a minute long if anyone wants to see it:
http://www.youtube.com/watch?v=8leWwEoIeXI
And yes, we tried to repair permissions a couple times but didn't seem to have any effect on whether it would install these updates. Again, it's NOT all software downloads/installs. It seems to be limited to LARGER pieces of software. Example: Firefox, Flash, Java and Silverlight have all downloaded and installed without error on my iMac. Apple combo updates and iTunes won't install at all.

Have photoshop 6 on a dead pc laptop with windows XP. Have a pc laptop that has been upgraded from Vista 64 bit (where photshop wouldn't install) to windows 7 professional 32 bit (clean install). Photoshop still won't install. Also having reinstallation

I have photoshop 6 on a dead pc laptop with windows XP. Have a pc laptop that has been upgraded from Vista 64 bit (where phootshop 6 wouldn't install) to windows 7 professional 32 bit (clean install). Photoshop still won't install. Also having reinstallation issues with pse6 on this same pc. Pse6 was installed and working on vista 64bit version of the OS, now won't install on rebuilt windows professional 7 32bit (keeps giving me serial number not valid errors). I'm not trying to pirate these programs. Just want to reinstall them.

you need,
Windows 98, Windows 2000, Windows NT 4.0 with Service Pack 4, 5, or 6a, or Windows Millennium
Microsoft Windows 98/Millennium/2000/NT 4.0 (Service Pack 4, 5, or 6a required)

Vista won't install Ipod Mini - PLEASE HELP!!

Latest version of Itunes 7.4.2 has been installed, Windows Vista has located Ipod mini in "other devices" in "Device Manager", but it won't install the Ipod. I've reinstalled Itunes three times and searched the Windows Vista disk and various internet forums, but with no luck.
I'm on the verge of selling the ipod - any advice would be welcome.
Thanks

I suggest either getting a Mac or going back to Windows XP because Vista is known to have these problems.

Windows 7 won't install any Audigy 2 ZS drivers

I did a clean install of Windows 7 and noticed right away, that the drivers for my Audigy 2 ZS didn't get installed. Here is the error I was given via device manager / properties for card:
The drivers for this device are not installed. (Code 28)
This operation requires an interacti've window station.
Drivers I've tried:
From Windows Update, dated October 4, 2008<
Creative's website, Driver version?2.8.00, dated July 3 2009
Creative's website, Beta driver version 2.8.00, dated Oct 2009
Creative's website, Vista driver 2.2.0002, dated March 6, 2007
danielk's audigy support pack 3.5
When I tried the Creative executables and danielk's support pack, I do not get any errors during any parts of the install(s).
Windows Updates says the install failed with unknown reason. When I attempt to "update driver" through device manager, it says it finds the driver but it gives me the same error as mentioned?above: This operation requires an interactive window station.
What else can I try? I've also done an "upgrade" install of Windows 7 on top of the clean install (out of desperation). At this point, I feel like reloading my XP imaged install,?so I can have working audio again.
So, please, if there is something I can try, then please help. Is there a way to do a "logged" install and send it to someone at Creative?
Thanks for your time

So, just to update everyone on my situation. I think my issue was caused by the migration tool, Windows Easy Transfer.
I formatted the partition the partition that Windows 7 was installed on, and did a fresh reinstall. Upon first boot of the new reinstall, the audio drivers were still not installed. I then immediately tried to "update drivers" via device manager and Windows installed the latest beta drivers from October , 2009 with no errors.
Is there any reason why the install won't install the drivers on its own? Did it not ship with Audigy 2 ZS drivers?

Windows 8 Won't Install over 29 Updates

I have an ASUS laptop and about 3 months ago it got some updates that it won't install. It downloads and says it installs them, and when I go to restart the computer it gets halfway done and says "failure to configure updates, reverting changes."
I have literally tried everything. My computer has found corrupted files and it cannot fix them. Maybe I should start there? Not sure what to do though! HELP!

Hi,
Apologize for the late reply.
2014-06-02 16:46:50:989 4660 1e84 Handler FATAL: CBS called Error with 0x800705b9,
2014-06-02 16:46:50:991 4660 1a50 Handler FATAL: Completed install of CBS update with type=0, requiresReboot=0, installerError=1, hr=0x800705b9
2014-06-02 16:08:41:654 1016 19c4 DnldMgr WARNING: CheckIfDirExists returned error 0x80070002.
2014-06-02 16:09:04:016 1016 1e54 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
2014-06-02 16:08:32:776 1016 10c8 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80070490
What is the situation by now?
The Windowsupdate.log shows error 0x80070490, 0x800705b9, which means some of the windows components are corrupted.
Windows Update error 0x80070490
Fix Windows corruption errors by using the DISM or System Update Readiness tool
ADD infor: Windows Update error "0x80070002" or "0x80070003"
As DISM tool we have already tried, please take a look for the other methods mentioned in the KB aritcle I posted earlier.:
"Failure configuring Windows updates. Reverting changes. Do not turn off your computer" error when you try to install Windows updates
Best regards
Michael Shao
TechNet Community Support

Windows updates won't install

Hello,
I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
any more information.
I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
anything in Even Viewer or Reliability Monitor either.
What could it be?
Thanks.
Chris Hansen

Hi Chris,
Firstly, please check if those Windows Update have already installed:
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
If there is no any Windows Update installed, try to
reset the Windows Update component to check if it could resolve the issue.
Karen Hu
TechNet Community Support

10.5.3 Won't Install

Similar Messages

Maybe you are looking for