10.5.6 and WinxXP sharing?

I tried this in another forum and it didn't get solved.
My Post and responses to some questions.
For the life of me I just can't get my networked WinXP PC to file share with my Mac running 10.5.6. I just upgraded it to 10.5 from 10.4.11. I have 2 drives one with 10.4 and 10.5. With 10.4 all I had to do was go into My Network Places and use the TCP/IP/username/Public folder path to connect. A box would open asking for my username and password and all has been great.
Something has changed in 10.5. I've tried a number of the SMB setup tutorials and nothing works. What was 10.4 using to connect?
This is frustrating as I'm usually pretty good at troubleshooting. I don't have admin rights to the PC so hopefully the solution won't involve changing anything on the PC. Our office doesn't support my Mac, I'm on my own, and they have control of the PC. With 10.4 it was a no-brainer.
Yes all the tutorials pointed to turning on SMB through the Sharing panel. I just checked everything again from both drives and everything looks good.
This is my setup on both drives. I cloned my 10.4 drive onto my second drive then did a 10.5 install using the Archive and install keeping the user settings. It created a fresh 10.5 install and a Previous System folder. All my network settings seemed to work with Safari, Entourage, etc. just not my PC with the shared Public Folder.
When in 10.4.11 both the File and Windows Sharing are checked and under the Windows Sharing it says to use \\XXX.XXX.XX.23\username to connect with the PC.
On the PC when I use Add Network Place I type this path in when it asks and a box pops up asking for me to name it and then for my user name and password and I'm connected. If I check the remember password I connect automatically from then on.
When in 10.5.6 there's only File Sharing (no Windows Sharing, they were combined from what I read) and it tells me to use smb://XXX.XXX.XX.23 to connect. The slashes are now forward and not backward and there is no username. When I try this I get the following message.
"The folder you entered does not appear to be valid. Please choose another."
I've tried it the old way the new way, with and without the username and get the same message. I can jump back and forth between my drives and connect without fail from the 10.4 drive and nothing with 10.5. Frustrating
The firewall has not been on in either OS.
With 10.5.6 in the Security panel, Firewall tab, the Allow all incoming connections is picked and the box says "File Sharing (SMB)".
As mentioned I've tried just about every combination of path names I could think of without getting a connection. I get the same folder not valid message.
I'm at work and do not have admin rights to the PC and our IT staff are strict and will not support my Mac on the network.
It's up to me to figure it out. I've never had a problem with this until now and I've used every version of OS X on this Mac.
I'll try the NetBIOS name I saw that listed under the WINS tab in the Network Advanced tab.
I would appreciate any help in solving this. Thanks

Finally! I figured it out using this tutorial. Even though it's for VISTA my WinXP computer's My Documents folder was already setup to share. I'm still unable to figure out how to connect the old way from the PC but I actually find this to be just as good.
http://www.ifelix.net/tech/3022.html
Before, when running 10.4.11, I would use the PC to connect to my Mac's Public Folder using Add Network Place and the Mac's TCP/IP address.
Now, running 10.5.6, I'm able to connect to the PC by using the PC's smb://(PC TCP/IP address here) path from the Finder/Go/Connect to Server menu.
This connects to My Documents folder on the PC running WinXP. I doesn't work the other way around going from the PC to the Mac.

Similar Messages

Does simple file and folder sharing on an iMac work with OSX Server?

Hi There
I wonder if I should install OSX Server on an iMac wher several users work on the same files and folders.
My question - before I do something I might regret:
Does simple file and folder sharing on an iMac within several users really work with the help of OSX Server?
All I want to be able to do:
Admin creates a new folder1 and gives it read- and write access for user1 and user2.
User1 creates a subfolder1 in folder1, and a document1 in subfolder1.
User2 edits document1. Later Admin edits document1.
All these simple editing of files and folders (and subfolders) within a main folder should be possible. This is not possible now.
Is everything clear? I'm not a network specialist or something, I just want to give some co-workers access to some data on my computer without problems.

So what you need are recursive permissions.
I suggest you create a group and add user1 and user2 to that group. You can name that group whatever you want, but for now i will call it FSUsers
Execute this in terminal. Replace FSUsers with your new group
sudo chmod -R +a "FSUsers allow list,add_file,search,add_subdirectory,delete_child,readattr,writeattr,readextat tr,writeextattr,readsecurity,file_inherit,directory_inherit" /Users/Shared/*
Replace /Users/Shared with the location of your shared folder. Make sure you keep the /* at the end (this allows all subfolders and files to get the same permissions.
If you need to add people to the share just add them to the FSUsers group, the FSUsers group should should also be allowed in the sharing preferences.

Airplay and home sharing does not work with my 2nd gen apple tv

though my 2nd gen apple tv with version 7 and my iphone 4s with ios 8.0.2 are connected to the same wifi network, airplay and home sharing doesnt show up in my itunes nor in my phone! what should i do?

Hello there, Ashwin.
The following Knowledge Base articles offers up some great steps for troubleshooting issues with both AirPlay and Home Sharing, respectively:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
http://support.apple.com/kb/ts4215
and
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

If i have a work ipad with a work email and a shared icloud for all employees, can i set up a second itunes and icloud account with a separate email address on the same ipad for my personal stuff?

i am a teacher and my school has given all of us a ipad to use. it is set up with my school email and a shared itunues and icloud account. they have told us we can use it for anything that can be used for education purposes. i have downloaded books and other items that i have marked up for my use. however if there is ever a problem i cant identify my applications or books if other teachers have downloaded the same apps or books as well as my documents. is there a way to set up a 2nd itunes account and icloud account so that i may use that when backing up anything that would be personalized by me so that i can find what is rightfully mine. they are ok with it but were unsure how to do this, so can anyone help me? thanks

Sorry, you cannot use more than one iTunes account at a time.

Error message about firewall and internet sharing

hello all i have a question regarding the use of firewall and internet sharing.
I have a PMG5 connected to internet through Airport. I've linked an Xbox 360 via the built-in ethernet port in order to access Xbox Live. I had to open specific UDP ports on the OS X firewall but it now works fine. However, in the Sharing Preference Pane, Internet Tab, i still get an error message saying that my Internet Sharing is disturbed by the settings of the firewall and sharing services, it says that i did not activate "personal web sharing" in the first two tabs...but i DID ! And there's no way to get rid of this error message.
I know I know some may consider it's not a real problem because it's just an error message while the connection actually works fine but well, I tend to hate error messages when they're not supposed to show up. So if anyone know the answer, thanks in advance...
Good day to everyone
Vince, Paris...

sorry about the delay in replying, was kinda busy
well trashing the pref files was useless and i tried with another user, same thing. As for the second opinion, the problem was not about which port was used cause as i said the connection sharing works fine and anyway it was the correct port that was checked, it's just that i get an error message while there is no apparent error and everything works fine, i'm told that personal web sharing is not enabled but it is...
Anyway as i said, it's probably not a real matter, as long as it works...which brings me to another thing. I've created a special protocol in the firewall to enable a proper dialog with the xbox. it's basically the same thing you do for ichat AV when you have video connection problems, you track down the concerned UDP port using terminal, you allow traffic and all... The protocol for the xbox worked great for some days, but now it seems it's not enough, the game set keeps trying on another port and i constantly have to update the protocol or deactivate the firewall...and enabling back all UDP traffic is not enough to solve it.
In a way i think everything is linked, the initial error message when everything was fine and the current trouble. Any idea?
thanks
Vince

Computer - computer network and internet sharing

I apologise if this has been discussed elsewhere - please point me to any useful links.
I have a G4 iMac and iBook (running 10.4.6) both with airport extreme cards installed. I would like to use a computer to computer connection for file / printer sharign and most importantly to share the ethernet connection to the internet running through my iMac.
I would be extremely grateful if someone could point out how to do this and incorporate a practicable level of security (I don't want any of the hundreds of people in adjacent flats downloading lord knows what through my connection).
Having accomplished this, I then need to be able to create a similar connection when required so that when required I can share the internet connection from the iMac with our PC laptop running Windows XP service pack 2.
So, the simpler the better, instructions for creating a computer - computer network for internet and file sharing between two Macs and following that between the Mac with the internet connection and a Windows laptop.
Thank you very much in advance.
G4 iMac USB 2.0 / G4 iBook Mac OS X (10.4.6)

You don't need to setup up computer to computer connection if your using internet sharing. Once you start internet sharing then your 2 computers are connected togther.
I would be extremely grateful if someone could point out how to do this and incorporate a practicable level of security (I don't want any of the hundreds of people in adjacent flats downloading lord knows what through my connection).
The problem you have is that if you enable internet sharing on one of your macs to share its connection over airport then the only level of security you can enable is WEP encryption.
The problem with WEP encryption is that it offers no real security and can easily be cracked. WPA is the only security you should consider using and unfortunately OSX does not have WPA encryption functionality when using the built in internet sharing function.
Your best solution is to get a wireless router that has a SPI firewall an WPA encryption. Depending on what your current internet connection is and how it is provided would determine the best kind of router to get.

Help with LTE and Internet Sharing for BUIlD Lumia...

Nokia,
I received the Lumia 920 when I was at BUILD 2 weeks ago. I followed the instructions and the phone mostly works on AT&T. I had a 900 so I assumed my LTE and Internet Sharing plan would easily transfer. Unfortunately that does not seem to be the case. I called AT&T gave them my IMEI number but it's not in their system and is not recognized as a Lumia 920. Because this is not an "AT&T phone" they wouldn't do much more to help. My data connection only ever shows 4G, never LTE as my 900 does and I cannot enable Internet Sharing even though it's on my data plan. I believe this is all controlled by the IMEI number.
Is there anything Nokia can do to help us? I can't imagine I'm the only one having this problem! I'm going to try again to see if I can get the issue escalated and maybe they can force the IMEI number to be recognized as a 920.
Thanks!

Sorry I never came back to update. The fix, as has been noted already, is to make sure AT&T has your IMEI as another 920 or your old 900 so that you get LTE (which appears as "4G"). Then, in the Nokia Access Point config setting (under System Config), make sure LTE2 is selected, then install an additional keyboard (I tried both Spanish and Chinese). This will force an OTA update that seems to enable Internet Sharing. I had to redo it a second time when I updated my Nokia Access Point app last week, but I just re-installed a NEW keyboard and got Internet Sharing back. It hasn't gone away since, contrary to what others have experienced. For more info (and where I found the fix) see this XDA thread: http://forum.xda-developers.com/showthread.php?t=1971997

Airport and internet sharing turns off by itself

Hi everyone, I have an imac that I purchased earlier this year, and I use internet sharing to get internet for my ipod touch. Until a few months ago, this worked fine but now airport and internet sharing turn off every time I restart the computer and I have to turn both back on every time. Is anyone else experiencing this problem or know hot to fix it?

Hi and Welcome to Apple Discussions...
Download and install the v10.5.8 combo update available here.
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
One of the "fixes" includes: - compatibility and reliability issues when joining AirPort networks.
After the installation, repair disk permissions.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

Problem with file and printer sharing

I just installed a Linksys WRT54G to replace a D-Link wireless router and cannot reestablish my file and printer sharing since replacing the router. I had file and printer sharing working fine before installing the WRT54G. All of the computers are running either XP Pro or 2000 Pro. I have two printers attached to one of my computers that I was previously sharing with all of the other computers on our home network. One is attached via a parallel port, the other via a USB port.
Here's what I've tried so far without success.
1. The IP of the WRT54G is 192.168.1.1, and the IP's it assigns to my LAN computers begin 192.168.1.XXX. The old IP of the D-Link was 192.168.0.1 and its LAN IPs were 192.168.0.XXX, so I've gone into my firewall and changed the settings for the range of trusted computers to correspond to the WRT54G's IP addresses.
2. I've tried uninstalling the printers and reinstalling them, including reinitializing printer sharing.
3. When I try to use the Windows "Add printer" wizard to add a networked printer, it can see the computer that has the printers attached, but it does not see the printers.
4. I haven't fooled around with the file sharing settings, but they've all be lost too, so I suspect there is a common problem for both printer and file sharing.
Any suggestions would be most welcome. I don't know what would be different about the WRT54G that would cause this problem.

Try this to Enable File and Printer Sharing...Turn Off the Router Firewall...Make sure the Windows Firewall is also Off...

File and Printer Sharing problem

Message Edited by bartman_60042 on 11-13-2007 05:47 AM

Oops...somehow submitted without any text.
My set-up: Linksys Cable Modem with Linksys Wireless Router. 2 Desktop Computers (Black and Grey) and 1 Laptop. Windows XP SP2 with all current upgrades on each.
While setting up File and Printer Sharing, I have the following:
1) The Black computer can file/printer share from both the Grey computer and Laptop.
2) The Grey computer can only file/printer share from the Laptop; not from the Black computer.
3) The Laptop can only file/printer share from the Grey computer; not from the Black computer.
All 3 computers were configured the same as far as I can tell. The only difference I notice is that the Black computer boots without the XP 'login' screen (no password required), could this be causing the problem? If this is the issue, how would I change the settings to 'login' to the Black computer? Any thing else which may be wrong?

File and Printer Sharing Problem with WRT54G

I am currently having problems sharing files over my network. My setup consists of:
3 laptops (wireless)
1 desktop (wired)
WRT54G V6.0 router with firmware version 1.00.9.
All of the computers have File and Printer Sharing enabled, unique names, and are on the same workgroup. However none of the computers can see one another. When I try to view workgroup computers for my network places, the explorer window stops responding for about 30 sec. and then spits out a dialog with the error:
"Workgroup is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The list of servers for this workgroup is not currently available."
I think that this problem has something to do with the router, as I have been successfuly sharing files and a printer with these settings using a microsoft 802.11b router for over a year. After purchasing the linksys and swapping it out with my old router, filesharing no longer functions.
I have spent a little time browsing the forums and have seen other posts from people with simmiler problems, but was unable to find any solutions.
Any help would be much appreciated.
Thanks.

I'm having the same problems as you are, I have 2 computers on wired the other wireless the router is in between and I can't access from either side, although I can ping and remote connect but just cannot share files across the network. I have looked all over the forums too and there saying to ditch linksys and do something else.
Its not you thats caused this it is the firmware and the router that have the problems.
My Specs:
WRT-54G
v5.0
That new firmware update 1.00.9 just isn't working right. I might downgrade my fireware to fix this problem.
Message Edited by justin2006 on 09-26-200612:24 PM

Facebook and Twitter sharing not working.

I have Facebook and Twitter sharing setup on my MBP a few months back and have used it frequently with no problems. However just recently, whenever I try to post status updates from Safari or Notification Center, the contextual menus do not appear.
Any help on this?

First, I would eject whatever it is that you downloaded. Go to Finder and eject it that way or depending how you have your system set up, do the two finger tap and Eject it. Download the link above. Once it downloads, double click it to install it. It should work. If it doesn't you need to use your Disk Utility to check for errors. Click your Finder again and then Applications. Scroll down to Utilities and then Disk Utility. Click on your hard drive and you will get a menu of items on the right side. Towards the bottom, you will see a button to Verify Disk Permissions. Click that and let it run. It may take a few minutes to finish. Once it's finished there may be a list of things wrong with your system. Click the Repair Permissions and let the computer do it's thing. Use Disk Utility at least once a month to make sure everything is in order on your system. If this doesn't fix it, I don't have any other suggestions. I'd hate to say do a fresh install but that might be the next step if this doesn't work.
Something else to consider is that is if you use Time Machine and the system did work at one point, you could go back to the last known good point and reinstall that back-up. You would lose anything you have saved since that point (obviously). If you take steps to back up your information, that should not be an issue. (For me), Time Machine works as advertised. If you are not backing system up regularly, shame on you. You need to start ASAP backing up. It's an easy process and it's times like you are having now, that make the small preventive maintenance, worth extra time and effort.
Good luck.

ICloud Photo Library and Family Sharing

Does anyone know how the iCloud Photo Library and Family Sharing accounts interact? I'd rather not have to specify what to share with the rest of the family if I don't have to.

Each family member has their own Apple ID, but uses the main one for purchases. It seems to make sense that each AppleID could have its own Photos library, but I can't find anything in the support area that says this to be the case definitively. I want each family member to have their own Photos library that syncs between their iPhone and their ID. I hope that's how it works.

HT204053 My wife and I shared the same AppleID but want to break these apart. We set up a new AppleID for her but can't get this changed on the phone. How do we switch her AppleID default on her iphone 4?

My wife and I shared the same AppleID but now want to break these apart into separate accounts. I have set up a new appleid for her and also set up on line. However, I can't figure out how to change this on her iphone4. I have looked at all of the General settings but need guidance. When I use the phone to try to purchase songs from itunes, it reverts to the old appleID.
Any suggestions?

Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID)

My dad and I shared an iTunes account for years and now I'm getting my own, how can I keep my music and apps?

My dad and I shared an iTunes account for years and now I'm getting my own, how can I keep my music and apps? I'm worried that I won't have any ability to access my apps and music. We have our itunes separated on different computers, so I have all of my stuff separated from his, but I don't know how to put them in my new account.

Well... there really isn't any fully legal way to do this.
The simplest solution is to continue sharing the same iTunes purchasing acct, but create different ones for iCloud (assuming that's why you needed to do the split).
Slightly less kosher: Burn AUDIO CD's, of the music then copy them back to your new account.
BE sure to do this from original acount, To keep the music info, you'll copy over the CDDB file (in prefs somewhere) - since this maintains the data of CDs that you've had in library.... (it isn't carried over onto a user created CD.)
There's also

10.5.6 and WinxXP sharing?

Similar Messages

Maybe you are looking for