10.5.6 install fails with Prohibitory sign
Since the 10.5.6 update has come out, I've tried multiple times to upgrade to it. All fail after reboot with the Prohibitory sign (and the progress wheel below that still spinning).
I tried upgrading from 10.5.5 and then restored from my Time Capsule three times. I tried downloading the 10.5.6 combo update separately, same results. And after calling Apple support, who told me to rebuild the machine from the install disk, I tried from 10.5.1, same results. Apple support basically said "If you get that symbol and your disks are ok, then you're screwed." My disks are totally fine and the files are all there. Disks have been verified and permissions repaired. I've read through every possible failure scenario on every message board and have found nothing that helps. This is very frustrating.
Only two things I can think of that would contribute:
- I have a software RAID config with 2 drives, standard striped config
- I use Parallels 4.0
Any ideas? Thanks.
wizrdry wrote:
Since the 10.5.6 update has come out, I've tried multiple times to upgrade to it. All fail after reboot with the Prohibitory sign (and the progress wheel below that still spinning).
I tried upgrading from 10.5.5 and then restored from my Time Capsule three times. I tried downloading the 10.5.6 combo update separately, same results. And after calling Apple support, who told me to rebuild the machine from the install disk, I tried from 10.5.1, same results. Apple support basically said "If you get that symbol and your disks are ok, then you're screwed."
Did they really say that?
My disks are totally fine and the files are all there. Disks have been verified and permissions repaired. I've read through every possible failure scenario on every message board and have found nothing that helps. This is very frustrating.
Only two things I can think of that would contribute:
- I have a software RAID config with 2 drives, standard striped config
- I use Parallels 4.0
Any ideas? Thanks.
Lose the RAID and lose the Parallels and see what happens. Install Leopard on a bare, clean machine. If it does not install, then call for a genius appointment.
Similar Messages
-
Mavericks install freezes with prohibitory sign and spinning wheel
I tried to update my MacMini from Lion to Mavericks. Everything went ok until after restart. On gray screen, Apple logo showed up for a while with spinning wheel which soon turned into prohibitory sign and spinning wheel. And this is where it stayed for hours and hours. Luckily I was able to recover back to Lion. I tried to update for another time but with exactly same results. Lion runs just fine with no problems but it would be nice to update if it is possible. Is anyone else out there having this same issue?
Welcome to Apple Support Communities
Did you check that all your apps are compatible with OS X Mavericks?
What I recommend you to do is to get a USB drive or DVD and copy the OS X Mavericks installer to it by using Lion Diskmaker > http://liondiskmaker.com Also, make a backup of your data with Time Machine.
Then, hold the Option (Alt) key while your computer is starting up and select your DVD or USB drive. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive, and finally, close Disk Utility and reinstall OS X. Disconnect all peripherals from your computer except the mouse, the keyboard and the USB drive or DVD, and see if OS X Mavericks is installed correctly.
After reinstalling Mavericks, you will be able to restore the backup you made -
Install failed with exit code 11?
Hi,
I am trying to deploy a language pack and set the override language to English-US which I have created 2 programs for in my package. When the first program runs I am getting an error in the execmgr.log that "Install failed with exit code 11" Any
ideas what this means? When I run this command manually on the machine it works fine:
"C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
I checked the dism.log as well but I don't see any errors. Both logs are below, any help or suggestions would be greatly appreciated TIA
<![LOG[Command line = "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab", Working Directory = C:\WINDOWS\ccmcache\4j\]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr"
context="" type="1" thread="4976" file="scriptexecution.cpp:352">
<![LOG[Running "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab" with 32bitLauncher]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr" context=""
type="1" thread="4976" file="scriptexecution.cpp:370">
<![LOG[Created Process for the passed command line]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="scriptexecution.cpp:513">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
CommandLine = "\"C:\\WINDOWS\\System32\\Dism.exe\" /online /add-package /packagepath:\"en-us\\lp.cab\"";
DateTime = "20150127130028.509000+000";
MachineName = "";
PackageName = "";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 4976;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\WINDOWS\\ccmcache\\4j\\";
]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:715">
<![LOG[Raised Program Started Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976"
file="executioncontext.cpp:459">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[MTC task with id {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}, changed state from 4 to 5]LOG]!><time="08:00:28.525+300" date="01-27-2015" component="execmgr" context="" type="1" thread="5904"
file="execreqmgr.cpp:6288">
<![LOG[Program exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="scriptexecution.cpp:676">
<![LOG[Looking for MIF file to get program status]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="executionstatus.cpp:282">
<![LOG[Script for Package:LIA002A0, Program: Install failed with exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="3" thread="2488" file="executionstatus.cpp:252">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127130028.650000+000";
ExitCode = "11";
MachineName = "";
PackageName = "LIA002A0";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 2488;
UserContext = "NT AUTHORITY\\SYSTEM";
]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="event.cpp:715">
<![LOG[Raised Program Error Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488"
file="executioncontext.cpp:572">
<![LOG[Execution is complete for program Install. The exit code is 11, the execution status is FailureNonRetry]LOG]!><time="08:00:28.665+300" date="01-27-2015" component="execmgr" context="" type="1"
thread="1956" file="execreqmgr.cpp:4165">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[MTC task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D} deleted successfully.]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9070">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
<![LOG[Deleting request for program Install. Failing parent program InstallEN]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="execreqmgr.cpp:8147">
<![LOG[Requesting MTC to delete task with id: ]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
015-01-27 08:00:28, Info DISM DISM.EXE:
2015-01-27 08:00:28, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2015-01-27 08:00:28, Info DISM DISM.EXE:
2015-01-27 08:00:28, Info DISM DISM.EXE: Host machine information: OS Version=6.3.9600, Running architecture=x86, Number of processors=4
2015-01-27 08:00:28, Info DISM DISM.EXE: Dism.exe version: 6.3.9600.16384
2015-01-27 08:00:28, Info DISM DISM.EXE: Executing command line: "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Loading Provider from location C:\WINDOWS\System32\Dism\FolderProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Connecting to the provider located at C:\WINDOWS\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-01-27 08:00:28, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2015-01-27 08:00:28, Info DISM DISM.EXE:
2015-01-27 08:00:28, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2015-01-27 08:00:28, Info DISM DISM.EXE:Thanks, it seems as though it is not doing anything now. I just see that the policy has arrived in the log below but it is not installing it? The dism.log hasn't changed at all so it seems that it isn't even executing the command now? Am I missing something
else? I even tried re-advertising it though client center.
Command is now:
C:\WINDOWS\sysnative\Dism.exe /online /add-package /packagepath:"en-us\lp.cab"
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:52:28.943+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="5036" file="event.cpp:405">
<![LOG[Policy arrived for child program Install]LOG]!><time="09:12:48.440+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6867">
<![LOG[Policy arrived for parent package LIA002A0 program InstallEN]LOG]!><time="09:12:48.487+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6893">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="09:12:48.487+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:405">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "LIA20116";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127141248.502000+000";
MachineName = "";
ProcessID = 2012;
SiteCode = "";
ThreadID = 3528;
]LOG]!><time="09:12:48.502+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:715">
<![LOG[The user has logged off.]LOG]!><time="09:36:59.174+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4320" file="execreqmgr.cpp:5138"> -
Flash Player Install failed with error code: 30
Hi, I want to report a problem with the Adobe Flash Player 13.0.0.182 (Mac OS X, English) installer on OS X 10.9.2. Mavericks. I'm posting this so the engineers will know what to fix in the next update version.
I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Symptom is the first installer downloads the 2nd, starts to launch it, then quits it with "Error: Unable to proceed with the installation" and a green (success?) checkmark. The GUI provides no other assistance except to "FINISH", which leads to the generic "Adobe Flash Player could not be installed." page.
The system log says: Adobe Flash Player Install Manager[22567]: Install failed with error code: 30.
The FlashPlayerInstallManager.log says:
2014-04-13 16:12:01 -0500 [I] IM: ---------- log start ----------
2014-04-13 16:12:01 -0500 [I] IM: All install checks pass
2014-04-13 16:12:01 -0500 [W] IM: Unexpected umask value for process: 0
2014-04-13 16:12:06 -0500 [I] IM: User does not have any processes that need to be closed.
2014-04-13 16:12:06 -0500 [I] IM: [install started]
2014-04-13 16:12:06 -0500 [E] RA: Unable to launch FPInstallHelper. Error = 'launch path not accessible'
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T/FPInstallHelper':
NSFileCreationDate = "2014-03-27 04:20:43 +0000";
NSFileExtensionHidden = 0;
NSFileGroupOwnerAccountID = 0;
NSFileGroupOwnerAccountName = wheel;
NSFileHFSCreatorCode = 0;
NSFileHFSTypeCode = 0;
NSFileModificationDate = "2014-03-27 04:20:43 +0000";
NSFileOwnerAccountID = 0;
NSFileOwnerAccountName = root;
NSFilePosixPermissions = 2541;
NSFileReferenceCount = 1;
NSFileSize = 13348;
NSFileSystemFileNumber = 4892044;
NSFileSystemNumber = 16777224;
NSFileType = NSFileTypeRegular;
2014-04-13 16:12:06 -0500 [E] RA:
Attributes for '/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T':
NSFileCreationDate = "2014-04-07 13:43:21 +0000";
NSFileExtensionHidden = 0;
NSFileGroupOwnerAccountID = 0;
NSFileGroupOwnerAccountName = wheel;
NSFileModificationDate = "2014-04-13 21:12:06 +0000";
NSFileOwnerAccountID = 0;
NSFileOwnerAccountName = root;
NSFilePosixPermissions = 449;
NSFileReferenceCount = 12;
NSFileSize = 408;
NSFileSystemFileNumber = 4552991;
NSFileSystemNumber = 16777224;
NSFileType = NSFileTypeDirectory;
2014-04-13 16:12:06 -0500 [E] IM: [install failed: 30]
2014-04-13 16:12:06 -0500 [E] IM: Install failed with error code: 30.
2014-04-13 16:12:06 -0500 [I] IM: ---------- log end ----------I have a 2013 iMac so according to Adobe blog posts it shouldn't be affected by the invalid cpu instruction issue.
Regardless... I still recommend "falling back" to 12 until they get this release right for everyone. I've read plenty of posts in the Apple forums from new iMac, Mini and MacBook users who've had nothing but trouble. Even the "gurus" there are linking to Chris Campbell's post here:
ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround
Using the offline installer completely eliminates the errors seen with the stub installer. -
DTM install fails with error 1935 on Windows 7
Trying to install DTM 600_b047 on a Windows 7 64-bit system. Install fails with
Error 1935 and HRESULT= 80073712. Have tried to run via Run As Administrator. It seems to get most of the way through before failing. (Without Run As Admin, it fails much earlier complaining about a cab file not found.)
Any ideas?Hey adairlw,
Welcome to the BlackBerry Support Community Forums.
What security software is currently installed on the computer?
Also can I get you to re-name the install shield folder which is located under C:\Program files\common files. Once you re-name the folder, then try to install the software.
I look forward to your reply.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
ACR 8.4 CC RC install fails with AAM message 'patch not applicable'
ACR 8.4 CC RC install fails with AAM message 'patch not applicable' - Running Photoshop CC on OSX 10.7.5
Anyone seen this or have any ideas for a fix?
I also have my legacy CS6 installed on the same Mac - tried installing ACR 8.4 CS6 RC and that fails with the same dialogue box from AAM
The DNG converter installs no issue.
Thx
Chris.Do you have some other software, like Photoshop Elements 12 on your system that would generally also be compatible with ACR 8.4 final but isn’t compatible with the RC because the RC’s only for PS users?
I installed the RC the same day it was released on my computer that has PS-CS6 & PS-CC with Windows 7 and it worked ok, so the update generally works, but something isn’t on your systems.
Are you up-to-date with your PS-CC version, which seems to be 14.2.1:
http://blogs.adobe.com/crawlspace/2014/02/photoshop-cc-14-1-1-update-now-available.html
And is CS6 updated to 13.0.6?
http://www.adobe.com/support/downloads/product.jsp?product=39 <http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh> &platform=Macintosh -
Cumulative Update 3 client update install failed with code 1642
We have SCCM 2012 R2 and recently updated to CU3
Existing client is version 5.00.7958.1000
Pushing update package created during CU3 update failing on some computers
I am trying to update some of laptops using CU3 x86 update and getting following errors
Script for Package:ABC00126, Program: Cumulative update 3 - x86 client update install failed with exit code 1642
I have reviewed many forms but couldn't find relevant.
Update works on about 70% on machines with same image but failed on rest with same 1642 error
Same issues occurs applying client on during TSequence on some of machines.
It is very inconsistent,
Any help would be greatly apprciated
Thanks
RJ
RJ09I verified package does copied over in ccmcache folder.
Also try to run update package using pstools, got error same as Torsten mentioned.
Here are logs from client.
Checking content location C:\Windows\ccmcache\gt for use
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully selected content location C:\Windows\ccmcache\gt
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Executing program as a script execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Found executable file msiexec.exe with complete path C:\Windows\system32\msiexec.exe
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Successfully prepared command line "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Command line = "C:\Windows\system32\msiexec.exe" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\Windows\TEMP\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous, Working Directory = C:\Windows\ccmcache\gt\
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Created Process for the passed command line
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "ABC212D1";
ClientID = "GUID:f298da2e-dfd1-428e-8b3c-b03602f95719";
CommandLine = "\"C:\\Windows\\system32\\msiexec.exe\" /p configmgr2012ac-r2-kb2994331-i386.msp /L*v C:\\Windows\\TEMP\\configmgr2012ac-r2-kb2994331-i386.msp.LOG /q REINSTALL=ALL REINSTALLMODE=mous";
DateTime = "20150114005604.541000+000";
MachineName = "DH-07";
PackageName = "ABC00126";
ProcessID = 3496;
ProgramName = "Cumulative update 3 - x86 client update install";
SiteCode = "abc";
ThreadID = 2588;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\gt\\";
execmgr
13/01/2015 6:56:04 PM 2588 (0x0A1C)
Raised Program Started Event for Ad:ABC212D1, Package:ABC00126, Program: Cumulative update 3 - x86 client update install
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="ABC00126",ProgramID="Cumulative update 3 - x86 client update install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
MTC task with id {8EB498C5-71D5-4933-BA80-6EEB8E189F98}, changed state from 4 to 5
execmgr 13/01/2015 6:56:04 PM
2588 (0x0A1C)
Program exit code 1642 execmgr
13/01/2015 6:56:04 PM 2784 (0x0AE0)
Could some please review and advise..
Thanks
RJ09 -
Flash Player Install Manager[681:16322] Install failed with error code: 30
OS 10.10, MBP 2011 i7, latest updates. I ran the installer by opening up the app package and invoking the install via terminal. at the 75% mark ( download finishes ) the installer fails. in the terminal I got this maybe helpful error message. any idea on getting flash to install ? its worse because I've run the uninstaller so parts of various websites don't work now
Sok, its a permissions error because the installer isn't at the right run level, even asking for my admin password. if I do
sudo Install Adobe Flash Player.app
[enter password]
Installer now runs. it generates a bunch of error messages in the terminal
Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
Reason: image not found
——— does this about 10 times ending like this -------
2014-10-28 22:03:10.831 Install Adobe Flash Player[744:19476] Error loading /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder: dlopen(/Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder, 262): Library not loaded: /Library/Frameworks/DivX Toolkit.framework/Versions/A/DivX Toolkit
Referenced from: /Library/QuickTime/DivX Decoder.component/Contents/MacOS/DivX Decoder
Reason: image not found
2014-10-28 22:03:47.190 Adobe Flash Player Install Manager[764:19989] Install failed with error code: 17.
the install actually finishes though and flash is working… YAH ! but only a semi uber geek would ever figure this out or think to try it. please fix the installer as its got a problem under 10.10 -
Client install fails with Error 0x87d00280 on ccmsetup log file
CAS and Primary Server are on Server 2012 R2, Clients are Win 7 and Server 2008 R2 in
same Domain. Primary Server has DP and MP installed, I can successfully install client from my Primary Server through Client Push Installation. I don't see any errors on SCCM Console.
On the client side I can see C:\Windows\ccmsetup\ccmsetup.exe is installed and the "ccmsetup"
Service is not in running status.
When I checked the ccmsetup log file, the latest error message says - Have already tried all
MPs, Couldn't find DP locations. Also another line says - The Certificate Selection Criteria was not specified. There are no Certificates in "MY" store.
Do I need to install self signed Certificate through MMC snap-ins, DNS issue or I am missing
something, Please help!
Angur J Patelis your MP set to https ? seems like its certificates issue. You can go through the documentation
https://technet.microsoft.com/en-us/library/gg682023.aspx? on how to setup PKI in sccm 2012 to check if you have created certificates as needed .
this might help you http://jackstromberg.com/2014/09/system-center-2012-r2-configuration-manager-ccmsetup-failed-with-error-code-0x87d00280/
Eswar Koneti | Configmgr Blog: www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: eskonr -
System Update 5.03 install fails with 'wizard was interrupted'
I have a W520 that I have upgraded to Win 8.1. I'm trying to install the System Update utility and InstallShield Wizard fails with:
InstallShield Wizard Completed
The wizard was interrupted before System Update could be completely installed.
Your system has not been modified. To install this program at a later time, please run the installation again.
Click Finish to exit the Wizard.
I've searched for solutions all over the place and come up blank. This usually tells me there is something screwy on my machine or I'm not searching for the right keywords.
Solved!
Go to Solution.Windows 7x64 - T430s - 2352CTO
There is a log file but it's too big to post.
It can be viewed at https://www.dropbox.com/s/hl420jgyqs8z9oj/tvsuSetup.log?dl=0
The part where it fails is below:
InstallShield 8:08:51: Invoking script function InstallSUService
1: SU service installation failed, please retry the install.
InstallShield 8:08:52: Setup aborted
InstallShield 8:08:52: CallScriptFunctionFromMsiCA() ends
CustomAction InstallSUService returned actual error code 1602 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (E4:78) [08:08:52:146]: NOTE: custom action InstallSUService unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
Action ended 8:08:52: InstallSUService. Return value 2. -
Stand alone APEX listener install fails with timezone region not found
Hi,
I have searched the forum but found only a thread for the installation with Goldfish.
I am very new to all this so I apologise if my problem is too simple, but please help as I am very frustrated with it.
I have a 10.2.0.4 database on Windows XP for testing with.
I installed APEX into it successfully, then down loaded the listener.
I have to Java installations, one under my Oracle Home, the other under Middleware where I have JDeveloper installed.
If I try $ORACLE_HOME/jdk/bin/java -jar apex.war it throws a Unsupported class version so I tried with the Middleware jdk and it appeared to install.
I then went to http://localhost:8080/apex/listenerConfigure and entered the password for APEX_PUBLIC_USER and the info for a basic connection, it fails with the following message
Request could not be processed due to error:
Sat Apr 30 00:06:30 CAT 2011
ORA-00604: error occurred at recursive SQL level 1
ORA-01882: timezone region not found
Please if anyone can help me through asap this I would be most gratefulYay, I found the solution:
I started by running:
begin
for v_rec in (select tzname,tz_offset(tzname) v_offset from v$timezone_names
where tzabbrev='CAT') loop
dbms_output.put_line('tzname '||v_rec.tzname||', offset '|| v_rec.v_offset);
end loop;
end;
SQL> /
tzname Africa/Khartoum, offset +03:00
tzname Africa/Windhoek, offset +01:00
tzname America/Anchorage, offset -08:00
tzname US/Alaska, offset -08:00
PL/SQL procedure successfully completed.
I then added -Duser.timezone="+01:00" before the apex.war ie
java –jar -Duser.timezone="+01:00" apex.war -
New router: cp1525nw wifi install fails with vague error message
Product: HP Laserjet Pro cp1525nw
OS: WIndows 8.1
Hardware: Asus laptop
Recently received new router from Verizon (FIOS), model FQG1100 BHR4 Router
Purchased printer in 2012.
Printer was working with old router; it won't communicate with new router.
Over four days I have repeatedly removed the printer from the laptop and tried reinstalling using the wifi method. The install instructions say to run the CD, choose wifi, connect the USB cable when prompted, configure, remove cable when prompted.
When I attach the USB cable the configuration starts, but it either times out ("taking too long") or fails with vague message about not finding the product. I am never prompted for an SSID.
I tried a USB install and that worked; so the USB cable is good.
Windows File & Print Sharing is enabled.
I've tried re-setting the printer to defaults, and ensured the wifi menu says "ON" for wifi.
I ran a wireless network test report:
PASS for wireless on, wireless working, and Security.
FAIL for Network Name (SSID) Found.
NOT RUN for: printer settings consistant with wireless router settings, No filtering, connected, signal strength, other networks detected.
Wireless netwrorks detected: 9
I note the router label does not statE "SSID", but says "ESSID".
I would appreciate any ideas for what to try.
Please post here or send message to [Personal Information Removed]
This question was solved.
View Solution.Last night I finally got it to work. I removed the printer fully from the PC and rebooted. I turned off the printer. I ran a cable to the router (cable modem). I reset the router, which then assigned an IP address to the printer. I changed the security settings on the router to use WEP instead of WPA. I ran the HP printer setup program---and it finally presented me with the "provide SSID" screen. The program ran successully. I printed a test page. I changed the router secuirty back to WPA2. I printed another test page. I tried rebooting everything and printed again. I also tried removing the cable and then printing again---the printing failed.
In short, I needed to do two things: connect a cable and change the router temporarily to WEP for the install.
In my case, my printer is close enough to the router to run the cable. A little disappointing that the true wireless won't work, but I can print wirelessly from my laptop.
I've seen how a lot of people have had the same issue I had, and how HP is of no help in solving this issue. I'm convinced the printer has a flaw. I hope my posts will be of benefit to a few people having the same issue. -
8.1.6 install fails with Error 1321 Installer has insufficient privileges -
Adobe Reader “Check for Updates” identifies “Adobe Reader 8.1.6 (CPSID_49167)” as “Available”.
Installation fails with “Error 1321.The Installer has insufficient privileges to modify the file C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins\Search.api.”
Reboot tries to complete install adding unwanted desktop icon, but CPSID_49167 still shows as “Available” and MSI29706>LOG(s) show above error.
XP SP3 Home, IE7, Adobe Reader 8.1.5Thanx kashifMohd,
Downloaded the fix, vetted it, and before creating a new Administrator account used the following recipe with success:
1. Ran downloaded fix with usual Admin Account and got the “Error 1321 for Search.api.” as before, but now there is a pop-up asking "Retry" or "Cancel" that did not appear when using "Get Updates" function from running Adobe Reader. Replied "Cancel".
2. Rebooted, and disabled Kaspersky Anti-Virus.
3. Again ran downloaded fix with usual Admin Account and got Error 1321 for different file: "C:\Program Files\Adobe\Reader 8.0\Reader\plug_ins3d\3difr.x3d" with pop-up asking "Retry" or "Cancel".
4. Clicked "Retry" this time and installation completed successfully.
Thanx again. -
Hyperion 11.1. 2.0 Install fails with "Some referenced jars do not exists"
Hi All,
I am trying to install Hyperion 11.1.2.0 on my laptop. Though the requirements document says the supported OS is windows 2003 or 2008, I have read that people are able to get it working on other OS' as well.
I have downloaded the below files:
V20779-01
V20782-01
V20783-01
V20790-01
V20792-01
V20799-01
V20800-01
V20801-01
V20802-01
V20843-01
V20850-01
I have the loopback adapter installed and OBIEE 11g running on weblogic server.
The EPM install has gone through successfully as I see from the log. But when I try to configure the "EPM System Configurator" it command exits with the below error message:
Running preconfig checks...
Running EPM_ORACLE_HOME check...
EPM_ORACLE_HOME environment variable value: F:\OracleBI11G\EPMSystem11R1
JAVA_HOME environment variable value: F:\OracleBI11G\EPMSystem11R1\..\jdk160
_11
EPM_ORACLE_HOME check succeeded
Running .oracle.products check... .oracle.products check succeeded
Running Jars manifest check...
Time spent for manifests parsing: 220 ms
Maximum jars depth achieved: 6, while restriction was: unrestricted
Parsed 383 manifests
Total jars and classpath entries encountered: 383
Total not-existing referenced classpath entries count: 22
Total classpath elements to check: 67
ERROR: F:\OracleBI11G\modules\org.apache.ant_1.7.0\lib\xercesImpl.jar not
exists; file depth: 3; referenced from F:\OracleBI11G\EPMSystem11R1\common\jlib\
11.1.2.0\ctg.jar referenced from F:\OracleBI11G\EPMSystem11R1\common\jlib\11.1.2
.0\epm_j2se.jar referenced from F:\OracleBI11G\EPMSystem11R1\common\config\11.1.
2.0\configtool.jar
FATAL ERROR: Jars manifest check failed with message "Some referenced jars do no
t exist"
Exiting in 30 seconds
After reading a similar post in OTN which suggested this could be due to OHS not installed correctly, I reinstalled OHS successfully.
I still get this error. Can anyone help me how to get around this issue.
thanks,
sandeep.I got the same problem with you. If you check in your physical directory, you wouldn't find F:\OracleBI11G\modules\org.apache.ant_1.7.0. Maybe when the installtools installed the EPM System, it detected that apache had been installed by OBIEE. Maybe you'll find F:\OracleBI11G\modules\org.apache.ant_1.7.1. The way I took to make configtools worked was by copying F:\OracleBI11G\modules\org.apache.ant_1.7.1 to F:\OracleBI11G\modules\org.apache.ant_1.7.0 and re run the configtools.
Now I got the other problem when I tried to deploy foundation service to weblogic. It gave me EPMCFG-10067 : Failed to get admin user name for the domain.
Try to copy F:\OracleBI11G\modules\org.apache.ant_1.7.1 to F:\OracleBI11G\modules\org.apache.ant_1.7.0. Maybe after that you can help me solving my problem. -
Adobe Acrobat XI Standard 11.0.10 silent install failing with error 1603
Hello
I just updated my AIPs for Adobe Acrobat Pro 11 Pro and Standard. The Pro silent install is working fine. But I cannot get the Standard install to run on Windows 7 or WIndows 8. I have gone over every detail that I can think of or find on forums.
I use the Adobe Customization Wizard XI and choose the basic stuff to create my transform. I don't generally enter a serial number in the customization setup but I tried that and the installation did appear to complete successfully. But when I tried to open Acrobat it did not work. Processes like PDapp.exe where running in a loop but never stopped. Without a serial I get the errors below and the install fails almost immediately. I have recreated the API and transform a few times hoping it would help.
Installing with the following line msiexec /i "%~dp0AcroStan.msi" TRANSFORMS=AcroStan.mst /qb /L*v c:\acrobat.log I get an error message that just says "error".
Application Event logs
Product: Adobe Acrobat XI Standard -- error.
Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.10. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1603.
When I run the AcroStan.msi by itself the installation completes successfully so it would appear the issue is in customization process or the .mst file. Any help would be greatly appreciated.
Thank youI'm assuming that verbose logging is accomplished by adding /L*v c:\acrobat.log ? No, I do not have CustomAction AAMIU_Install.196A45B3_0387_4DF9_9420 in my log file. The only items referencing 1603 are below.
CustomAction CheckForPendingOperation returned actual error code 1603 but will be translated to success due to continue marking
CustomAction SetLotusNotesInstalled returned actual error code 1603 but will be translated to success due to continue marking
CustomAction ProcessAbcpy returned actual error code 1603 but will be translated to success due to continue marking
MSI (s) (84:C4) [15:30:14:422]: Note: 1: 1708
MSI (s) (84:C4) [15:30:14:422]: Product: Adobe Acrobat XI Standard -- Installation operation failed.
MSI (s) (84:C4) [15:30:14:422]: Windows Installer installed the product. Product Name: Adobe Acrobat XI Standard. Product Version: 11.0.10. Product Language: 1033. Manufacturer: Adobe Systems. Installation success or error status: 1603.
MSI (s) (84:C4) [15:30:14:458]: Attempting to delete file C:\windows\Installer\9d9a98.mst
MSI (s) (84:C4) [15:30:14:478]: Deferring clean up of packages/files, if any exist
MSI (s) (84:C4) [15:30:14:478]: Attempting to delete file C:\windows\Installer\9d9a98.mst
MSI (s) (84:C4) [15:30:14:478]: Unable to delete the file outside of the engine. LastError = 2
MSI (s) (84:C4) [15:30:14:479]: MainEngineThread is returning 1603
MSI (s) (84:28) [15:30:14:480]: Calling SRSetRestorePoint API. dwRestorePtType: 13, dwEventType: 103, llSequenceNumber: 31, szDescription: "".
MSI (s) (84:28) [15:30:14:483]: The call to SRSetRestorePoint API succeeded. Returned status: 0.
=== Logging stopped: 1/16/2015 15:30:14 ===
MSI (s) (84:28) [15:30:14:484]: User policy value 'DisableRollback' is 0
MSI (s) (84:28) [15:30:14:485]: Machine policy value 'DisableRollback' is 0
MSI (s) (84:28) [15:30:14:485]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (84:28) [15:30:14:485]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (84:28) [15:30:14:485]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (84:28) [15:30:14:486]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (84:28) [15:30:14:487]: Destroying RemoteAPI object.
MSI (s) (84:54) [15:30:14:487]: Custom Action Manager thread ending.
MSI (c) (E4:0C) [15:30:14:489]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E4:0C) [15:30:14:489]: MainEngineThread is returning 1603
=== Verbose logging stopped: 1/16/2015 15:30:14 ===
Maybe you are looking for
-
Hi, While configuration of XI managed system . Logical ports were created in the managed system diagnostics configuration. Can anyone please tell me whether these ports will be created in solution manager or managed system? Where can i check in syste
-
[Sims 3] Brightness a bit dark
Hi. I run on Arch x86_64 with bin32-wine 1.1.40 (because with the 1.1.41, I can't launch the installer) and I've a little problem with the sims3. When I launch it in fullscreen mode, the screen become dark, and it do that only with the sims 3, my oth
-
IdM 7.2 UI - link between UME "User ID" and MSKEYVALUE
Hello together, if we provide somebody access to the user interface of the IdM the user has no permissions/can not see any tab in the Portal UI. The user has the necessary UME actions/role in the portal and the corresponding identity has the nescessa
-
My boss has some CDs that has some service manuals for his hobby cars on them. They require Acrobat Reader 4.0 to view. The CDs have 4.0 on them so you can download it. When I tried to download it I got a registry error but his manuals still open. He
-
Trouble installing 10.5 to new hard drive
I just installed a new 500gb hard drive to my macbook pro, i formatted it to Mac OS Extended (Journaled) and used disk utilities to restore from my old hard drive which copied the os and all my user files over. I now want to reinstall the OS as Prese