10.5.6 update...can't see iPod or usb thumbdrives

I recently upgraded my desktop and laptop to Leopard (from a DVD install disc). After the upgrade, software update on the iMac showed several update for the OS. I allowed software update to install them. BIG MISTAKE. Now my iMac no longer allows me to sync my iPod. It is as if I am not even connecting it. Nothing, nada no response at all. My usb thumbdrive (PNY Attache), which worked fine prior to software update, upon plugging it in flashes several times and then simple goes dead. It seems to make no difference which usb port the iPod or usb drive are plugged into. They both work fine on the iBook which is 10.5 but has not had the software update run on it yet! (like I really would run it on this after the problems on the iMac!)
I wonder if software update does a combo update or regular update. I have download both from apple's website but wanted to see what other though before trying to run the combo update.

Hello, heatsiphonman,
I am having the exact same issue with my 5G iPod. I tried a clean restart (with no memory of open windows), and all the other suggestions via the support website and it's still a no-go. Not sure where to go from here. It seems like it may be a Lion issue or a combination of Lion and iTunes 10.5. I may take it in to an Apple store and see if I can get it to sync there. Meanwhile, I'll keep a close eye on this topic to see if anyone else might be having this issue.
Mike.

Similar Messages

  • Disk write error, can't see iPod in usb port, could not format or restore

    I have had them all folks. I won this schuffle in a golf tourney with closet to the hole, I wish I could take that shot back and shank one. In short the iPod new sw releases are crap. Here is what I did:
    Plugged the ipod in a usb port in the back of my desktop to restore, would not restore from the high speed usb's in the frt of my Gateway, why? who knows.
    I did not update the ipod when it asked me to upgrade after the restore, however, I did upgrade iTunes to version 6.0.1.3.
    This config seems to be working, I can go into the ipod, delete the songs that are there and use the autofill and it has worked several times now. Prior to this I would get a disk write error, could not see the ipod in the usb, yada, yada, yada.
    Apple has a serious problem with the latest sw as is evident from this forum. If I helped one person out with this post I am thankful as I am a tech kinda dude, not too much and have played with this, reinstalled the sw, faced east and chanted to Mecaa while rubbing the side of my machine, to no avail.
    While I type this email message it's still working, put a pound in the till folks. This is a first kids, have not been able to do this several times in a row without some sort of error.
    It's all trial and error, hope this helps some of you, let me know.
    Out - Dj
      Windows XP  
      Windows XP  

    hiya!
    hmmmm. okay, if you're connecting to a Toshiba laptop, let's check up on this possibility:
    iPod not recognized correctly on Toshiba laptop
    otherwise, here's a good place to start with that error message:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
    love, b

  • Ipod updater doesn't see ipod shuffle

    ipod updater doesn't see ipod shuffle...can any body help...

    Restore your Ipod from a Mac computer not a PC it will normally be reconized then by the Pc if not send it to the store

  • In iOS 7.0.2, Appstore updates can not see updated apps

    Hi. i am using iPhone 4S with iOS 7.0.2.
    I am updating some apps when updates comes but when i look notification center , some times i can see updated apps in notification center and the problem is Appstore updates can not see in all items .And some times, there is no any blue point some times but.
    Is this bug?
    Second question is; when i use assistive touch, some times, notification center and control center can not work. What about you.
    Note: i installed in DFU mode and clean installed ios 7.

    Then readd the account.
    settings - mails - add - the account.

  • HT1454 Can't see ipod videos from 60GB ipod classic.  I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play

    Can't see ipod videos from 60GB ipod classic.  I have Apple USB/video cable running through Onkyo receiver into Samsung TV. Video & TV out settings seem correct-I can see album cover, but no video. Is it possible to get itunes music videos to play or do I need to get new ipod.   It works on my iPad and iPhone, but not through iPod Classic.

    Are these music videos located under Videos on your iPod?  Do it play other regular movies (if you have any on the device)?
    B-rock

  • HT1451 I can't see ipod on the itunes library page anymore.  how do i transfer musci from my library to my ipod?

    I can't see ipod on the itunes library page anymore.  how do i transfer music from the hard drive to my ipod now?

    Click on the button for the iPod on the iTunes header bar, e.g.:
    or go to the View menu and select "Show Sidebar" after which iTunes 11 will look much as earlier versions did. From there the process is exactly the same.
    Regards.

  • How can I see Ipod download on iTunes.  (It syncs but I do not see the synced data)

    How can I see IPOD download on iTunes after syncing.  The data syncs but is not visible on computer screen

    For example, when I sync the contents of my address book to the computer using itunes, shouldn't I be able to see what content was transferred to itunes?  When my calendar is synced shouldn't I be able to see on iTunes the events that I added to my IPOD?

  • Since software update, can't see contents of iPod when connected to iTunes

    About 2 days ago, when I connected my iPod to my pc (iTunes), it said there were some software updates for my iPod so I downloaded them and the iPod rebooted itself. Once it came back up, my iPod showed up in iTunes under "devices" on the left hand sidebar. I got the registration page - I usually click register later, but nothing happened this time. It didn't bring me into my iPod. So I tried to Register. I could get so far, then it asked if I wanted some free movie or something, I said NO THANKS, CONTINUE, but nothing happened. I wasn't registered AND I couldn't access my iPod. I can see my iPod under My Computer. I can see "sandra's iPod" uder devices in iTunes. BUT, I can't get to the content when connected to iTunes. All of my stuff is there on the iPod. I can play my iPod when it's not connected to iTunes - but I can't see the content, manipulate playlists, delete songs, etc. when connected to iTunes. I am almost positive this is a result of the latest software updates to the iPod. I have not updated iTunes - I didn't want to and compound the problem. I'm not a techy person - so please be gentle! Thank you. Sandra

    Resolved at home.

  • Ipod will not Update "Can't unmount Ipod" message

    This may be a simple answer but when I run ipod updater to get the newest fixes for my ipod, it stops updating in the middle and gives me the message "Can't unmount ipod" ???
    What does this mean and what am I doing wrong??? Do I need to have Itunes running while it updates or no?/? I'm just confused thanks!
    Dell   Windows XP  

    I was wondering, is there a file similar to ctzapxx.exe on the installation CD for the CL audigy 2 ZS that will allow the software for the sound card to run? I get the same message as you do (no audigy 2 zs hardware found on computer) but when trying to install the core drivers. I have tried installing the core drivers manually but to no effect, still no hardware present. Therefore, I tried randomly running ctzapxx.exe from my installation CD just to see if it would run and it did, the only problem is I dont have the base drivers so it technically updated nothing. Anyone know the name to a similar CT file that would work the same way but would instead install the audigy 2 software itself? Thanks.

  • Itunes can't see Ipod - what to do?

    It might asimilar problem as many of you have posted. I purchased Ipod classic in dec. 2009 and it worked fine. Then yesterday I wanted to download some more music to put on my Ipod Classic. when I opened Itunes it said it had upgrades and I did the updates. After this nothing works! There are no songs anymore on my Ipod and when I connect it to my computer, the computer can see it and it says there are no error to the hardware, but itunes can NOT see it!! When I connect my Ipod to the computer Itunes do not work at all. I have tried to reset it as described in the manual and I have tried to reinstall itunes on the computer, I have tried it on a new computer and so on, but nothing works! HELP!
    Have only had the Ipod for 2 months and it wont work anymore. Any suggestions how to cure this problem?
    Thanks in advance for the help!
    Karina

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Shuffle On Desktop/Updater doesn't see iPod

    My iPod Shuffle shows up on the desktop. The amber recharge light is blinking. When iTunes opens, I get the following message: "iTunes has detected a software update for the iPod. Would you like to install it now?" When I click "Okay", the updater opens and I get the following message: "An unexpected error occurred". When I click "okay", the updater now tells me to plug in an iPod to update it. My iPod is plugged in and charging, and is on the desktop. When I quit the updater, my iPod does not appear in the iTunes source list.
    I then quit and reopened iTunes. This time when prompted regarding the software update, I click cancel. iTunes now opens with my iPod listed in the Source list. However, when I go to add songs to the iPod I get the following message: "Some of the songs in the iTunes music library were not copied to the iPod because your iPod software is too old. Go to www.apple.com/ipod to get the latest iPod software update."
    I've reinstalled the updater 3 times now. I got the same results as described above each time. The updater doesn't see the iPod. What is the "unexpected error"? Why doesn't the Updater see the iPod?
    Thanks for any help.

    I just downloaded the latest updater version, plugged in my iPod Shuffle, and sat in wide eyed amazement as it actually recognized that the iPod was, in fact, plugged into the computer!!!
    I held my breath while the updater did it's thing... could this actually be it? Could I finally join the army of gleeful millions, listening to my favorite tunes and newscasts while jogging? Would the wonderful little gift I got for Christmas finally - gulp! - work?
    Alas, no. Just as the updater was finishing up I got the following glass if ice water in my face:
    "An error occurred updating or restoring iPod. Disconnect iPod, reconnect and then try restoring again. If that does not work, go to http://www.apple.com/support/ipod"
    I did that, and noticed that "restoring" was not an option, as the "restore" button wasn't active. Ah well... my iPod shuffle goes back into it's neat little packaging, and back onto the shelf while I await the next round of potential solutions to slowly work their way down to the Discussions Sub-basement.
    I swear to God, I will not give up on this. I know it can work. Someday, someday...
    Gee

  • IPod Update can't mount iPod

    I have a 4th generation 20GB iPod. It's worked fine until recently. I had a couple glitches occur where it would skip to the next song in a playlist in the middle of a song. I tried updating the software on the iPod, but the entire thing crashed and now the glitches on the iPod are worse, iTunes and the updater can't read it and other PCs can't read it also. I have tried all of the trouble shooting guides about this problem. Is there a way I can reformat or wipe my iPod when computers can't recognize it?

    http://discussions.info.apple.com/webx?128@@.68bce79e
    After searching the posts on this forum for a while, I found a lot of people are having the same problem with their 4th gen ipods. Someone posted the same link that i put above and said something like "if you're ipod is not under warranty, you should try the link and see if that suggestion helps."
    THE SUGGESTION IS TO DROP THE IPOD FROM WASTE HEIGHT ONTO CARPETTED GROUND!!! It f*ing worked, man. After dropping it and restarting it, I went and plugged it into my laptop, and when I ran updater IT FINALLY LET ME CLICK RESTORE AND RESTORED THE IPOD!!! I'm guessing that updater was freezing and greying out the "update" and "restore" buttons for you like it was for me. But not after i tried dropping it.
    This is a pretty crazy solution, but i'm guessing that when i dropped it a bit ago, something got disconnected or something got connected that shuoldn't have. I don't know, but what i do know is that my ipod is working again. Hope this helps!!!

  • Can't see Ipod in network

    I have an IPOD touch that I can connect wirelessly to the internet. I am using a WRT610n router using WPA-2 encryption.  The IPOD connects through the router without any problems.  When I open LELA3 I see every computer/laptop that is connected to the router.  Even my wifes' Palm TX shows up.  However, the IPOD does not.  I have tried to use the add device, but it is of no help.  I have refreshed the network without any change.  I know the IP address, because I can disable the IPOD access in the access restriction menus.  While it isn't a huge problem, why won't the IPOD show up in the network?
    Also, I am another one with the red circle over the LELA icon.  I have talked to tech support several times and talked to a senior analyst, and they have no idea what is causing this except they think it is some program that is scanning the system.

    Same here. WRT54G2 V.1 recent firmware update...LELA 3.0 build 8219.42....going to install newest LELA 3.11.9139.94

  • Replacement Ipod 1.4 not recognized on PC and Updater "Can't mount Ipod"

    I just received a replacement Ipod mini 1.4 which is formatted for Mac. When I run the most recent version of the updater, I get an error message that states "Can't mount IPod".
    My Ipod no longer shows up in the "My computer" menu when I connect it to my PC, the only place it shows is in the actual usb hub in the device manager.
    I tried all the actions in the following link to no avail (http://docs.info.apple.com/article.html?artnum=61711).
    Please help!
    Note: I am leaning toward the illiterate side of computer literacy so please bear with.
    2nd Generation Ipod mini 1.4   Windows XP Pro  

    the same thing happened to me, and no, itunes doesn't recognize it.
    ephpod also doesn't recognize it, and neither does ipodwizard. i removed itunes and installed 6.0.5 and that also doesn't recognize it.
    i downloaded an older ipod updater exe (from 3-23, before it became integrated into itunes 7) and even that won't recognize it.
    i went back to itunes 7, and when i run an itunes diagnostic i get all green lights except the bottom, which means itunes can't tell that it's hooked up.
    but i see it in my computer, and the details still say that it has the data on it.
    also, when i try to use it normally there are no songs on it. the details say 0 songs, etc, but still says 22gb of space taken.
    i'm running windows xp, service pack 2, itunes 7, and am using a 5g 30gb video ipod. the ipod says that it is firmware version 1.2

  • Itunes/Updater don't see IPOD

    I'm having some problems with my new 60gb video IPOD. Itunes recognized it initially, but during syncing something happened and now Itunes and Updater don't see the IPOD at all. My XP computer sees the IPOD as a USB Mass Storage Device with and Ipod and and "unknown component" as part of it. After following all the steps in the help database, I think the problem is that the actual IPOD is somehow corrupted....I need to restore the factory settings. The problem is, that the updater doesn't see the IPOD - it's a catch-22. I tried to bring my ipod to work and got the same issue.
    Should I try hooking it up to a mac and doing a restore?
    Can I "format" the Ipod under windows explorer?
    What is going on??

    I'm having the same problem with my iPod. I've had it for 2 weeks and it hasn't worked yet. I just haven't had time to call Apple. I've tried everything on these help pages and the closest I've gotten was having the updater recognize the iPod so that I could hit the "restore" button but after a little thinking, the updater says, "can't mount iPod". I only got the updater to recognize it after unplugging my Internet connection. I'm convinced that these problems are software conflicts. I got rid of the folder with exclamation point by resetting the iPod through diagnostic mode(turn the hold button on then off, hold down the menu and the middle select button until you get the apple, then hold down rewind and the middle select button until you get a menu, choose manual and the option at the bottom of the list is "reset"). The easier way of doing a reset didn't work for me. Of course, since the ipod won't mount, the folder/exclamation point is back. This is so annoying. My last hope is to try using it on older computer that I've cleaned off. The idea of re-installing windows (and everything else) on my main computer is not an option - I have 60 gigs of stuff and junk on there plus software programs and I don't have time to untangle it all right now. I was so psyched to finally get my iPod and I understand that hardware/software has bugs but can ANYONE from Apple please figure this out for us!!

Maybe you are looking for

  • Can't create new files after moving to ext drive, LR4

    I moved all photos to a new ext drive (they used to be on the c drive); reformatted my desktop computer; reinstalled LR4.  Now there is no parent file under the name of the ext drive on which I can right click and "create a folder inside....".  I am

  • How to identify bounced mails thru java mail??

    Hi everyone, I have a Javamail program through which I m sending and receiving mails. I want to identify bounced mails from the ones I receive. Is there a way in the Javamail API or the SMTP protocol to detect if the mail recd is a bounced one?? Some

  • SchemaTool() throws ClassNotFoundException: oracle.jdbc.driver.OracleDriver

    KODO 2.5.3 I am trying to use the SchemaTool java class for schema manipulations. When I try to construct a SchemaTool object I get the following exception: com.solarmetric.kodo.runtime.FatalUserException: java.lang.ClassNotFoundException: oracle.jdb

  • Tree control's nodes and ites position

    Hello, Is there a way to get tree's nodes and items position,or get it by ElementVisualizationMode and Hit event ? Thanks, Assaf

  • What do you want from the next version of CS review?

    The concept for CS review is awesome and the current functionality looks to be a solid foundation ready for growth. I'm hoping that the product catches on and continues to mature at a decent pace. Are there other features that you would need in order