10.5.7 Macbook so slower, unusable... can't open Finder nor see HD...

I installed 10.5.7 from Software Updates (I now know I should not have done it from there). After installing, my Macbook is basically unusable. At first I wasn't able to see the application icons on the bottom of my desktop, the power display and wireless display and whatnot on the top right hand corner, and saw no HD on the desktop either. After several hard resets, I finally have the application icons on the bottom of my screen and the upper right hand details (battery life, Bluetooth, wireless, etc... those these come and go sporadically). I can open Safari (but not Finder) and Safari will take 10-15 minutes to open. I rebooted in Safe mode, but still have the same issues.
I was able to get to the Combo Update, and tried to download, but it says it can't mount.
Now I'm pretty much stuck. I've had other issues with the machine and the last time I took it to the genius bar, they upgraded me to Leopard. I don't have any hard disk with leopard on it because of this.
What can I do?

I don't quite understand how Apple could upgrade you to Leopard and not give you the Leopard disk. You are correct, you cannot check the hard drive with the original install disk now UNLESS you want to erase and drive and start from scratch.
You need to go back to the Genius Bar and tell them you need a Leopard disk.
Check something please. Click the Apple Menu  and then click; About this Mac. Make sure it's running 10.5.7. It will be displayed in the About This Mac pane.
Carolyn

Similar Messages

  • I just bought a macbook air and I can't open any of my downloaded apps in itunes

    I just bought a macbook air and I can't open any of my downloaded apps in itunes. They also keep trying to download to my iphone 4 s but only half of them will download, the others say waiting. thanks.

    iOS apps will not open in iTunes. iTunes will sync your downloaded apps to your iOS devices (iPhone or iPad) only.
    1. Login into your iTunes account
    2. Authorize your Macbook Air
    3. Download all your purchased apps to iTunes
    4. Sync with your iPhone.

  • I have the version of iPhoto that comes with my OS when I purchased my MacBook, but now I can't open it, because it says this, "You can't open the application "iPhoto" because it may be damaged or incomplete. Please help I have tons of family photos.

    I have the version of iPhoto that comes with my OS when I purchased my MacBook, but now I can't open it, because it says this, "You can’t open the application “iPhoto” because it may be damaged or incomplete. Please help I have tons of family photos.

    1 - the iPhoto application is an application and does not hole your photos - your photos are in the iPhoto library an dour normal daily backup will back them up so your photos are safe
    2 - what exactly does the error message say? You probably need to reinstall the iPhoto application form the original source
    3 - note that no version of iPhoto comes with any OS - iPhoto comes with all new Macs but not with any OS and most OS versions can run many different versions of iPhoto
    LN

  • HT5622 hi,my name is kutan.since i updated ios7 on my ipad;internet got very slow,i can not open facetime no more,i can not download or update anything from apple store! so this is just redicilous! please any help?

    hi,my name is kutan.since i updated ios7 on my ipad;internet got very slow,i can not open facetime no more,i can not download or update anything from apple store! so this is just redicilous! please any help?

    It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
    You can get it here:
    http://gimp-print.sourceforge.net/
    You can download the latest version from here:
    http://sourceforge.net/projects/gimp-print/
    Have you downloaded the recent Apple update to Epson drivers?
    http://support.apple.com/kb/DL1398

  • Can't open Finder windows or Preferences

    I can't open Finder windows or Finder Preferences.
    When I click on the Finder icon in the dock, use File>New Finder Window, the Go menu, or Finder>Preferences, nothing happens. I even tried opening a folder from Spotlight and "Open in Finder" from a stack but still nothing. I ran a cleaner (Cocktail) but no change. It's like having a virus. (Safari Autocomplete and Facebook login also stopped working about a day before I noticed this).
    The only thing problematic that has happened recently was while I was on familyguyx.net, the page loaded without any trigger to one of those pop-ups that repeatedly appears until you reset your browser. Since then I haven't been on that site but these other issues have started.
    Any help is really appreciated!

    Do you possibly have the Applescript menu or even some text processor in your dock?
    If you have the Script menu, open the script editor from that menu and type this into the untitled window:
    tell application "Onyx"
    activate
    end tell
    Then run it.
    If you don't, open a text editor-if you can-and type the same thing into it. Select all of the text and look for Services>Script Editor>Run As Applescript. That should run the above script and open Onyx. Services is under the Application Name menu.
    If those don't work, let me know what you have in your dock, and maybe I can figure out another way.
    Jim
    Message was edited by: Barney-15E

  • After installing OS X Mavericks I can not open Finder or Safari

    After installing OS X Mavericks I can not open Finder or Safari

    HI,
    I would check System Preferences > Internet accounts and see if an item is active for Messages that should not be.
    Alternatively delete the account in Messages > Preferences > Accounts.
    Highlight then use the - button at the bottom of the list.
    You could also use iForgot and check if the ID does in fact belong to you.
    NOTE.
    An Apple Issued Apple ID (@Mac.com, @me.com and @icloud.com) can be used as the iMessages registration ID as well as a Valid AIM Screen Name.
    An @me.com could have been issued any time during the MobileMe era and may not be active if it has not been "Converted" to iCloud.
    9:50 pm      Friday; November 8, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • HT3775 Hi, I can't open AVI (nor mpv) files made on a windows computer in QuickTime; Am I doing something wrong?

    Hi, I can't open AVI (nor mpv) files made on a windows computer in QuickTime; What am I doing wrong? Thanks.

    hinderkien wrote:
    Thanks gitmar,
    Indeed VLC opens both, avi and mpv, fine. Good media viewer! But why not Quicktime nor Final Cut?
    Maybe post in the Quicktime or Final Cut forums here and you may well get an answer.
    Good Luck
    Pete

  • Desktop is missing and can't open finder since upgrading to 10.9.5

    Since upgrading to OS 10.9.5 my desktop is missing (no drives or files) and I can't open finder or empty trash. I can only access programs in the dock. I tried zapping the PRAM and it fixed it but the next time I restarted same problem.
    iMac computer

    You might have corrupt .plists.
    Do a backup.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.finder.plist and com.apple.desktop.plist.  Move the .plists to your desktop.
    Re-launch Finder by restarting the computer and test. If it works okay, delete the plists from the desktop.
    If the same, return the .plists to where you got it  from, overwriting the newer one.
    Thanks to leonie for some information contained in this. 

  • My macbook is slow how can I tell if I have a virus?

    My MacBook is slow starting up and slow when I am on internet going to sites.  I read somewhere that there is a adobe flash that is actually some sort of virus?  I beleive I had the pop up and hit install.  How do I fix if this is the problem?

    Adobe Flash is not a virus but Flash content is very resource-hungry. Flash developers don't know or care about your hardware or bandwidth, both of which have limitations. Buying a new computer simply so that you can look at Flash-based advertisements makes little sense to me. Just avoid sites that use Flash.
    There are no viruses for Mac OS X. Keep it updated with software from Apple using Software Update. Without a more specific description of your hardware, the amount of memory you have installed, what third party system modifications you may have made, and what version of Mac OS X you are using, it is difficult to provide more specific guidance than that.
    Read the following to determine if something may apply to your concern:
    Do not download or install any product claiming to magically "clean up" or "speed up" or "optimize" your Mac. Without exception, they will do the opposite. If you already did, you found the problem. Fix it.
    If you're experiencing general slowdowns or "freezes" unrelated to Internet activity, the problem may be related to your computer or the software you installed and is something you may be able to fix, or at least improve. Aside from hardware failures and software that you install, including OS upgrades, there is no reason that your computer should not work precisely the same as it did when it was new. 
    General Mac maintenance: Tips to keep your Mac in top form
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
    Creating a temporary account to isolate user-specific problems: Isolating an issue by using another user account
    Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
    Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
    To identify potential hardware problems: Apple Hardware Test
    To resolve startup issues and perform disk maintenance, use Disk Utility.
    Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components.
    Read about it: Starting up in Safe Mode
    To repair a potentially corrupt hard disk, so that you may recover its data prior to replacing it, and subsequently reinstall Mac OS X: OS X Recovery (applies only to Lion and later versions of OS X)

  • My i pod touch screen is very slow and can't open the full page to close the voice over

    my ipod4 touch sceen very slow and i can't open the full page can't scrow to close the voice over

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • [Solved] [Macbook 9,2] xrandr - "Can't open display"

    Hi,
    after a long time Arch Linux runs on my Macbook!
    Now I need an X-Server. After a while it runs too.
    But I can't load i3.
    When I starting it with:
    xinit i3
    i3 display: "ERROR: No outputs found via RandR, disabling"
    When I use xrandr in commandline, it show's:
    "Can't open display"
    How can I fix it?
    Last edited by DasLampe (2012-09-25 19:29:51)

    When you say you get that error in commandline, do you mean a tty without X running?  If so, that is the expected result.
    Not that this is part of a solution, but it may refocus on the problem: X/i3 is failing to start properly, this may not actually be related to xrandr.
    As a test, have you / can you try starting the twm session described in the beginners guide?  Does that work?
    Then please post your ~/.xinitrc.

  • Bought a book on itunes on my ipad, downloaded it on my macbook pro but I can't open it.  It says "protected book"  How can I read it?

    I bought a book from iTunes on my iPad 2.  I also downloaded it on my MacBook Pro (2011 17" model) .  My book shows up there but I can't open it.  It says "protected book" ?   Any suggestions ?

    As mentioned, Apple only makes their iBook reader app for thier mobile devices.  And iBooks epub files are DRM locked to iBooks, so you cannot open it in anything but Apple's iBook reader on an iOS mobile device.

  • Can't open Finder after Upgrade to Yosemite 10.10

    After the Upgrade to Yosemite 10.10 on my MacBook Pro with Retina Display i can't open the Finder and it says it's not reacting. The bar on top when i'm at the Desktop is also gone.
    Can somebody help me ?

    I had this exact same issue, and I was just able to fix it (at least for now).  I'm not an expert by any means, so I can't tell you why my solution worked, but if you follow it and it helps, then great.
    First, you'll have to restart your computer and open in Safe Mode.  Restart the computer and as soon as you hear the startup noise, press and hold the Shift key.  Release it when you see the Apple icon.  It will take a little longer to start up.
    Then download and install the free software called OnyX.
    Once installed, open OnyX and click on the Verifying tab, then click on the Preferences tab. Run the Check button at the bottom.  If it tells you that you have any damaged files, double click them on the list, one at a time, and then delete those files.
    Then I clicked the Scripts tab, and Executed all three scripts.
    Finally, under the Cleaning tab, I clicked on System and executed everything except "CUPS jobs".
    I then restarted my computer like it suggested (without opening Safe Mode) and everything was back to normal!
    Hope this helps.
    Edit

  • After latest update to yosemite I can not open finder or any other windows from my desktop

    I can not open any windows after last update to yosemite. Finder can not be reopened. Software version is OS X 10.9.5, Macbook pro mid 2009.

    Good day Jeff.
    I am running most current Adobe Reader X.
    Tks Mark

  • Firefox nor firefox-uninstaller will not open although I can see that they are running in "Processes" meaning I can't open it nor uninstall it.

    If I try to open firefox or uninstall firefox, nothing happens. I see that they are running in "Processes" but that is all. I can't open it; I can't uninstall it. Any ideas? I've checked my hard drive for errors, no viruses, all other programs perform as designed. Thanks in advance.

    Sometimes the Firefox window gets "off screen" somehow. You often can force it to appear on the screen by right-clicking the little thumbnail image above the Taskbar and choosing Maximize. Does that work?
    One possible cause for this is that the file which stores window sizes and positions has become corrupted.
    '''Method #1:''' ''If you can get a maximized window:''
    Open your current Firefox settings (AKA Firefox profile) folder using either
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This should launch a new window listing various files and folders in Windows Explorer.
    Leaving that window open, switch back to Firefox and Exit, either:
    * "3-bar" menu button > "power" button
    * (menu bar) File > Exit
    Pause while Firefox finishes its cleanup, then rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
    Start Firefox back up again. Do windows display normally again?
    '''Method #2:''' ''If you cannot get a Firefox window at all:''
    Shut down Firefox by right-clicking the taskbar icon > Close All Windows.
    Using the Run dialog (windows key + R) or the Start menu search bar (or in Windows 8 maybe the charms bar search bar?) type or paste the following and press Enter to drill down to the Profiles folder:
    %APPDATA%\Mozilla\Firefox\Profiles
    Here you may see one folder -- in which case, double-click into that -- or more than one folder -- in which case, double-click into what looks like the most recently updated.
    Scroll down and rename '''xulstore.json''' to something like xulstore.old. If you see a file named localstore.rdf, rename that one to localstore.old as well.
    Start Firefox back up again. Do windows display normally again?

Maybe you are looking for

  • Sub Menu alignment in IE7

    On my test website www.psweb-test4.com On the nav bar "about us" sub menu I am having a real issue that I cannot seem to resolve. In IE7 I am trying to reposition/realign the background element I think this is ul.MenuHorizontal ul (this is highlighte

  • Camera / USB card reader not connection to macs anymore - fine with PCs

    Hi there, I have a Canon EOS 50 which has a CF card - I normally connect this to our macbook pros with a crd reader via usb. Alternatively, I connect the camera directly. Yesterday, something started to go wrong. I was connecting the card to download

  • Creating Images

    Im trying to make a double buffered panel. Ive used the Image x = createImage(intx,inty); method of constructing the image, when i get the graphics to write to the image I always get an execption. the code is as follows import java.awt.*; public clas

  • Where has the black background box behind attachments come from?

    Suddenly I have a black box behind any attachments. It is like a text box. It has not been there before! If I choose to print to a pdf attachment in an eMail the attachment id superimposed on a black text box with an 'X' in the corner, click the 'x'

  • Workflow Settings User Cannot Be Found

    This week I have removed some orphaned users from SP 2010 that no longer existed in AD. Now a workflow has stopped working, it's a basic one that just sends an email when a new item is added to a list. I've opened the 2 workflows in SPD and can't fin