10.5.7 update: Bluetooth gone, disks won't mount

Installation of the 10.5.7 update sort of worked. My system says it installed, but I did get a message saying something like "Update was not completely succesful".
The one reason for updating was that I hoped to be able to use my wireless mouse again, which on 10.5.6 would disconnect seconds after I connected it.
Now, Bluetooth isn't even able to connect to the mouse.
So I tried to do a Combo update reinstall of 10.5.7, but then I got the message "Mounting failed". I tried a random piece of different software and got the same message.
When I double click the .dmg file, I get the message "Device not configured".
Any solutions?

Thanks for replying. It's Apple's infamous Mighty Mouse.
Just ran Disk Utility > Repair permissions to see if that would solve anything, but no luck.
It did give warnings that the following permissions could not be repaired:
- System/Library/Filesystems/AppleShare/afpload
- usr/bin/setregion
- System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner
- System/Library/Printers/IOMs/LPRIOM.plugin/Contents/MacOS/LPRIOMHelper
It's the first time ever that an OS X update has given me headaches.

Similar Messages

DVD-Ram disks won't mount on Dual 450 - help!

I've got a particular and pressing problem. I'm an audio engineer among other things. I have a lot of files archived temporarily on DVD-Ram disks from my old Dual 450. I have to retrieve some files pronto but suddenly the DVD-Ram disk won't mount. The drive spits out the disk as soon as I insert it. It will mount CDs but not these DVD-Ram disks. Please help. I need to back these up off of thse old disks. But more urgently I have pending sessions that require I get some files from these disks. This happens both under OS 9.1 and 10.2.8 the last revisions of this computer I did. But it used to work until a year or so ago.
I have so far repaired permissions, used Disk Warrior and sprayed around the dusty drive with compressed air. It seems that perhapos a mechanism is loose springing the disk out when it's not immediately recognized as a CD or DVD-R.
Help!

Probably your best bet is to dismantle the drive and try manually cleaning the lenses, which has made a difference for some users.
Other option is to replace the drive with a new one capable of reading (but not necessarily writing) DVD-RAM media. LG-4163B is one such drive, Pioneer DVR-110 can also read DVD-RAM. These drives are under $40 online in the US.

System disk won't mount

Hi folks,
I have a Mac mini running 10.6.8 Snow Leopard. I'm having problems with iCal, so I erased the program and its Library support files, and tried to reinstall from the system disk (which is 10.6.3). The machine won't mount it, just ejects it after a while.
Is this normal behavior since the OS has been updated? It's new behavior to me. What would I do if I needed to reinstall the syatem?
Thanks,
Eric

Run the combo 10.6.8 update. If that doesn't work, get your PRAM battery replaced. If that doesn't work, get your optical drive cleaned and see if the disc inserts then. If that doesn't work, but other discs do work, then I would call AppleCare to get replacement original discs. If they don't work, then I would have get an external DVD drive from http://www.macsales.com/ and see if the disc will work from them. If that dosn't work, bring it in for service to find out what is wrong with it.

Help -- System disk won't mount

Hi folks,
My mini: Intel Core 2 Duo 2.4Ghz, ID Macmini4,1
System: 10.6.8
I need to restore my iCal. It's broken: won't give me recurring event alarms. I'm trying to run my System Disk and it won't mount, the machine just rejects it. Same with the Applications Disk that came with it.
The System Disk is 10.6.3 and the machine is now running the fully Updated version.
Help, please, this a business computer and I need iCal back.
Thanks,
Eric

Run the combo 10.6.8 update. If that doesn't work, get your PRAM battery replaced. If that doesn't work, get your optical drive cleaned and see if the disc inserts then. If that doesn't work, but other discs do work, then I would call AppleCare to get replacement original discs. If they don't work, then I would have get an external DVD drive from http://www.macsales.com/ and see if the disc will work from them. If that dosn't work, bring it in for service to find out what is wrong with it.

External disk won't mount after 10.5.7 upgrade

Hi,
I know there's problem with Buffalo external HD; mine is Lexcron 3.5'' external case and it won't mount neither. I tried PRAM restart, and if I go to Disk Utility and try to repair, it gives me the following message:
Verify and Repair volume “Dirty Hary”
** /usr/local/bin/ntfsfix has been disabled because of volume corruption issues.
** If you still want to try fixing your volume, use /usr/local/bin/ntfsfix from the command line...
Error: Filesystem verify or repair failed.
It worked with 10.5.6 and it still works with Win XP (it's NTFS format).
Is there something that I can do?
Will this issue be solved in Snow Leopard?
Thanks in advance for any kind of constructive info (I've already read threads with Buffalo issue, but I didn't find any thread giving a solution).
Sharlo

Sharlo wrote:
Hi V.K.,
Thanks for your response, can you provide some more details?
OS X has very limited support for NTFS. you need to repair the drive from windows.
How do I do that? I mean the disk works normally in Win XP and it worked normally in the previous OS X version. Btw. I've also installed NTFS-3D which allowed to write on the disk and search from spotlight (of course when it was mounted).
run chkdsk in windows and see if it finds any errors.
http://support.microsoft.com/kb/315265
it can also be that the problem is caused by ntfs-3g which is known to have a number of bugs. you can try uninstalling it or plugging in the drive in a mac without ntfs-3g installed.
there is no "issue" to solve.
Well if it worked in 10.5.6 and it works in Win XP and it doesn't work in 10.5.7 I am tempted to say 10.5.7 has an issue.
the fact that you have a problem with one drive on your particular system doesn't mean there is a problem with os x in general. an issue is when all or at least many people have a problem, not one.
furthermore, NTFS is a proprietary file system of Microsoft with closely guarded secrets about its inner workings which is why it has very limited support on other types of operating systems. apple is under no obligation to provide ANY support for something like that. programs like NTFS-3g are essentially unauthorized hacks.

Hard Disk Won't Mount; Lion Wants To Initialise It - Please Help!!

Greetings All,
Disk issues! Help! Ok, I have an external RAID box (Sonnet 8 Bay SATA) with 4 pairs of RAID 1 drives. One of the pairs, 3Tb Hitachis, all of a sudden won't mount on OS X Lion. Everything was working fine, tried to save something to them, Mac refused, I restarted and the other three pairs show up, but the 3Tb Hitachi pair don't. OS X gives me the message that "The disk you inserted was not readable by this computer". I've restarted the Mac and Sonnet box several times, checked that all drivers are up to date and reinstalled anyway. Have also taken the two drives out and tried to get them mounted on my Mac Pro or MacBook Pro using a FW800 dock without joy - always get the same message mentioned. Disk Warrior won't even help as when the Hitachi 3Tb is plugged in via the dock, the program hangs when it's scanning for disks. Although all the data on the drives is almost definitely backed up, I don't want to initialise / format the disks as there is a chance some video files aren't and also it'll knock FCP X as this was the primary drive where Events and Projects are stored.
Any suggestions would be thoroughly appreciated :-)
Cheers,
Edmond

Hi,
Both drives physically are working (both bought together several months ago). The Sonner RAID software shows the RAID pair as ok and doesn't report any issues or errors - it sees both drives and the RAID 1 is 100% fine. So, as far as teh RAID box is concerned, all is well and there are zero issues.
When I try plugging the drives in seperately using a dock, neither will mount and give the same error message :-(
The issue seems to be at a data / OS level. Biggest initial problem is I can't mount them to check :-(
Edmond

Hard Disk Won't Mount Volume

I have a hard disk that won't mount. It was previosly part of a software mirror RAID. The raid was degraded, so I tried to rebuild the second raid mirror. THis failed, and now the master won't mount either. In TechTools, the drive is reported as being fine, but the volume still won't mount. Any suggestions? This is really setting us back a bit.
Mini, iBook, PowerMac G5, XServe G4 Mac OS X (10.4.4)

If you know what you are doing you can check out Article number 106987. If that looks too complicated for you you might want to take the computer to an Apple specialist.

Disk won't mount - Unknown USB Device (Link in Compliance Mode)

I have an HP Envy DV7 (dv7-7243cl ) with Windows 8 Pro x64. My Western Digital 2 terabyte My Book USB3.0 external drive periodically won't mount ( sometimes it will, sometimes it won't). The drive has its own power source.
When this happens Windows device manager shows - Unknown USB Device (Link in Compliance Mode). This can happen if the system is up and running and I plug the drive into the USB port or on system startup where the drive is already plugged in.
Any clue how to fix this?
Other details:
Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz
12 Gig memory
Intel(R) HD Graphics 4000
System board 181C 52.24
Bios F.26

Well, the problem is that - as outlined in one of the articles I linked to - some USB devices will not work in Safe Mode; that may have to do with the fact the Safe Mode is only meant to be a troubleshooting tool, not a regular way of booting up. Did you have the USB devices attached while upgrading to 10.6? That would also be a problem - I unplug everything except keyboard and mouse.And, did you repair permissions after the upgrade? If not, do it now.
And, the other problem is the fact that you wait 1 - 2 years before addressing the issue; when you had it in for the last repair and it still exhibited the same problems afterwards, you should would have taken it back, possibly with some screenshots, exact notes of how/when/error messages, etc. and insisted on having it fixed or replaced.
So, I'd run the Apple Hardware Test (after you make sure that you have a complete backup) - instructions here:
http://support.apple.com/kb/HT1509
Report back with whatever messages you wind up with.

Downloaded update disk won't mount

I've noticed a number of updates failing to complete due to a failure in mounting the downloaded disk image.
Little snitch suggests an hdiutil command failure when it tried but I have had failures with various Google updates and VLC as well.
Any thoughts?

paulhoau wrote:
Sorry about the delay, I suspect we are on different sides of the planet.
Output from step 1:
at.obdev.nke.LittleSnitch (3926)
com.rogueamoeba.InstantOn (6.0.3)
com.AmbrosiaSW.AudioSupport (4.1.2)
com.bongiovi.DPSReflector (1.0)
com.rogueamoeba.InstantOnCore (6.0.3)
com.Cycling74.driver.Soundflower (1.5.3)
com.parallels.kext.prl_usb_connect (7.0
com.parallels.kext.prl_hypervisor (7.0
com.nvidia.CUDA (1.1.0)
com.parallels.kext.prl_hid_hook (7.0
com.parallels.kext.prl_netbridge (7.0
com.parallels.kext.prl_vnic (7.0
com.viscosityvpn.Viscosity.tap (1.0)
com.viscosityvpn.Viscosity.tun (1.0)
Output from Step 2
com.ambrosiasw.snapz.image-exporter
com.ambrosiasw.registration-helper
com.Growl.GrowlHelperApp.GNTPClientService
com.parallels.vm.prl_naptd
com.stclairsoft.DefaultFolderXAgent
com.parallels.desktop.launchdaemon
com.microsoft.office.licensing.helper
com.micromat.TechToolProDaemon
com.lithiumcorp.mars
com.lithiumcorp.lithium
com.lithiumcorp.database
com.lithiumcorp.clientd
com.google.keystone.daemon
com.elgato.eyeconnectd
com.edb.launchd.postgresql-8.4
com.blackmagic-design.streaming.BMDStreamingServer
com.ambrosiasw.ambrosiaaudiosupporthelper.daemon
com.adobe.SwitchBoard
com.adobe.fpsaud
at.obdev.littlesnitchd
Output from Step 3
com.ambrosiasw.SnapzLoginHelper
com.growl.GrowlLauncher
com.parallels.vm.prl_pcproxy
com.parallels.DesktopControlAgent
com.parallels.desktop.client.launch
com.nvidia.CUDASoftwareUpdate
com.micromat.TechToolProAgent
com.maintain.SystemEvents
com.maintain.PurgeInactiveMemory
com.google.keystone.system.agent
com.extensis.FMCore
com.blackmagic-design.DesktopVideoFirmwareUpdater
com.adobe.CS5ServiceManager
at.obdev.LittleSnitchUIAgent
ws.agile.1PasswordAgent
com.zeobit.MacKeeper.Helper
com.vladalexa.MagicPrefs
com.maintain.ShowUserLibraryDirectory
com.digitalrebellion.PreferenceManagerAutoSave
com.aunsoft.LaunchFinalMate
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9
com.adobe.AAM.Scheduler-1.0
Output from Step 4
/Library/Components:
iGlasses3.component
/Library/Extensions:
/Library/Frameworks:
AECore.framework
AEProfiling.framework
AERegistration.framework
Adlm.framework
Adobe AIR.framework
AudioMixEngine.framework
CUDA.framework
ColoristaRenderer.framework
Compressor.framework
CosmoRenderer.framework
DSPPublishing.framework
EWSMac-GC.framework
EWSMac.framework
ExtensisFontManagement.framework
ExtensisPlugins.framework
FxPlug.framework
LS3RendererCPU.framework
MacFUSE.framework
MediaServerAPI.framework
Motion.framework
NIKit.framework
NyxAudioAnalysis.framework
PhotoLooksRenderer.framework
PluginManager.framework
ProMetadataSupport.framework
Qmaster.framework
StuffIt.framework
StuffItCore.framework
TSLicense.framework
Turbo264.framework
XSKey.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/InputManagers:
Ecamm
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
EPPEX Plugin.plugin
Easy-WebPrint EX.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
GameTreeDM.plugin
GameTreeDM_NPAPI.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS5ServiceManager.plist
com.blackmagic-design.DesktopVideoFirmwareUpdater.plist
com.extensis.FMCore.plist
com.google.keystone.agent.plist
com.maintain.LogOut.plist
com.maintain.PurgeInactiveMemory.plist
com.maintain.Restart.plist
com.maintain.ShutDown.plist
com.maintain.Sleep.plist
com.maintain.SystemEvents.plist
com.micromat.TechToolProAgent.plist
com.nvidia.CUDASoftwareUpdate.plist
com.parallels.DesktopControlAgent.plist
com.parallels.desktop.launch.plist
com.parallels.vm.prl_pcproxy.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.SwitchBoard.plist
com.adobe.fpsaud.plist
com.ambrosiasw.ambrosiaaudiosupporthelper.daemon.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.blackmagic-design.streaming.BMDStreamingServer.plist
com.edb.launchd.postgresql-8.4.plist
com.elgato.EyeConnect.plist
com.google.keystone.daemon.plist
com.lithiumcorp.clientd.plist
com.lithiumcorp.database.plist
com.lithiumcorp.lithium.plist
com.lithiumcorp.mars.plist
com.maintain.CocktailScheduler.plist
com.micromat.TechToolProDaemon.plist
com.microsoft.office.licensing.helper.plist
com.parallels.desktop.launchdaemon.plist
com.stclairsoft.DefaultFolderXAgent.plist
/Library/PreferencePanes:
AirServer.prefPane
Apple Qmaster.prefPane
CUDA Preferences.prefPane
DesktopVideoPrefsPanel.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
Hazel.prefPane
MacFUSE.prefPane
ProCutX Server.prefPane
TechTool Protection.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
com.stclairsoft.DefaultFolderXAgent
/Library/QuickLook:
GBQLGenerator.qlgenerator
ParallelsQL.qlgenerator
QuickLookEyeTV.qlgenerator
StuffIt.qlgenerator
iBooksAuthor.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
Blackmagic Codec.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
Elgato Turbo.component
EyeTV MPEG Support.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
Motion.component
iChatTheaterPreview.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
ParallelsMD.mdimporter
iBooksAuthor.mdimporter
iWork.mdimporter
/Library/StartupItems:
ProTec6
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
.DS_Store
AdiumAddressBookAction_AIM.scpt
AdiumAddressBookAction_ICQ.scpt
AdiumAddressBookAction_Jabber.scpt
AdiumAddressBookAction_MSN.scpt
AdiumAddressBookAction_SMS.scpt
AdiumAddressBookAction_Yahoo.scpt
BTGoogleDirections.bundle
BTGoogleEarth.bundle
BTGoogleMaps.bundle
BTGooglePreferences.bundle
SkypeABDialer.bundle
SkypeABSMS.bundle
YMsgrCallABPlugin.bundle
YMsgrMsnABPlugin.bundle
YMsgrSmsABPlugin.bundle
YMsgrYimABPlugin.bundle
Library/Adobe Lightroom:
.DS_Store
Develop Presets
Export Actions
Filter Presets
Metadata Presets
Print Templates
Slideshow Templates
Web Galleries
Web Templates
Library/Components:
.DS_Store
MindVision
SharedMenus.component
Library/Extensis:
.DS_Store
Suitcase Fusion
com.extensis.FMCore-LaunchInfo.conf
Library/Fonts:
ARDS1
AdobeFnt07.lst
Brush Script
Vera.ttf
VeraBI.ttf
VeraBd.ttf
VeraIt.ttf
VeraMoBI.ttf
VeraMoBd.ttf
VeraMoIt.ttf
VeraMono.ttf
VeraSe.ttf
VeraSeBd.ttf
encodings.dir
fonts.dir
fonts.list
fonts.scale
opens___.ttf
Library/Frameworks:
.DS_Store
EWSMac-GC.framework
EWSMac.framework
GoogleMapsShared.framework
LXFramework.framework
Library/Indexes:
.DS_Store
FindByContent
Library/InputManagers:
.DS_Store
Saft
Library/Installer Logs:
Library/Internet Plug-Ins:
.DS_Store
CitrixOnlineWebDeploymentPlugin.plugin
EvernoteSafariClipperPlugin.webplugin
FolxNetscapePlugIn.plugin
Google Earth Web Plug-in.plugin
Macromedia
RealPlayer Plugin.plugin
Webex Plug-in.pkg
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
com.apple.AddressBook.ScheduledSync.ABExchangeSource.13106CAD-8BAF-4140-9F41-6ED B82F46AFD.plist
com.apple.AddressBook.ScheduledSync.ABExchangeSource.C1A97B4A-1B1F-467B-BAD5-80A 0911F7B39.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.47308D80-5292-4EFD-BFC8-1D5 64DE88C7F.plist
com.apple.CSConfigDotMacCert-xxxxxxxxx-SharedServices.Agent.plist
com.apple.SafariBookmarksSyncer.plist
com.aunsoft.LaunchFinalMate.plist
com.digitalrebellion.PreferenceManagerAutoSave.plist
com.maintain.ShowUserLibraryDirectory.plist
com.vladalexa.MagicPrefs.plist
com.zeobit.MacKeeper.Helper.plist
net.sourceforge.tvshows.plist
ws.agile.1PasswordAgent.plist
Library/PreferencePanes:
.DS_Store
Default Folder X.prefPane
LiteSwitch X.prefPane
Locations.prefpane
MagicPrefs.prefPane
MediaCentral.prefPane
MenuMeters.prefPane
MouseZoom.prefPane
Opera Preferences
Perian.prefPane
Warp.prefPane
handyPrint.prefPane
iChartwork.prefPane
Library/QuickTime:
.DS_Store
AC3MovieImport.component
OggVorbis.qtx
Perian.component
Library/ScriptingAdditions:
.DS_Store
Default Folder X Addition.osax
Library/Services:
.DS_Store
NoteBookHelper.service
OmniOutliner Professional.service
ToastIt.service
Library/Spotlight:
.DS_Store
NoteBook.mdimporter
Output from Step 5
Default Folder X Helper, Viscosity, EyeTV Helper, Rogue Amoeba Schedule Helper, EvernoteHelper, AirServer, SpyderGallery Desktop, Canon IJ Network Scanner Selector EX, MagicPrefs, MagicMenu, InterarchyHelper, Dropbox, HazelHelper, handyPrintDaemon
I think I need to simplify my Mac world...
You had, at one stage, MacKeeper installed but you appear not to have successfully uninstalled it. As for all the other third party stuff, I have never heard of it either. But make sure you uninstall MacKeeper for a start
how to uninstall MacKeeper – updated « Phil Stokes
Good Luck
Pete

USB disk won't mount on startup (have tried everything)

Hi!
I'm having big problems getting my USB disk to mount on startup.:(
It used to work perfectly by having 'mount /dev/sdc1 /media/disk' in rc.local (and umount in local.shutdown) but recently it started saying that 'filesystem type must be defined' (or something like that). So I changed the line to 'mount -t ext3 /dev/sdc1 /media/disk' but now I get a message that '/dev/sdc1 does not exist'.
So I decided to get this fixed in fstab once and for all.
I checked the designations of the disks with 'fdisk -l' and noticed that the USB disk would alternate between /dev/sdc, /dev/sde and /dev/sdd quite random on every reboot. In other words I couldn't mount it in fstab by using one of those paths cause I'd get the same problem with '/dev/sdc or -e or -d does not exist'. I figured the sollution must be to mount the disk by using UUID. I checked the uuid's and got the following (as you can see the USB disk is on this reboot registered as '/dev/sde'):
bash-3.2$ ls -l /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 6cf5e803-429a-44c3-bcf9-0f007df623f3 -> ../../sda1
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 8ef6be20-ee30-4a00-8946-56a4d94a7245 -> ../../sda3
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 947b3b86-8501-4011-9da2-4de45eb4ed60 -> ../../sda2
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 94911fb3-def7-4440-b6a5-5e09f91b19f6 -> ../../sde1
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 acd197d3-f63e-48f9-88de-41eff1b3b425 -> ../../sda4
lrwxrwxrwx 1 root root 10 2009-02-07 11:56 b6745703-bde6-44ef-865d-d09501ecc8ab -> ../../sdb1
I other words the UUID of the disk should be '94911fb3-def7-4440-b6a5-5e09f91b19f6' so I added that to the fstab file, but I still get the same error that the disk doesn't exist. How is this possible? Isn't the UUID supposed to be the same no matter what? When the disk is clearly labeled with this UUID every time I check it why can't it be used in fstab??
Here's my fstab (I've commented out the lines that I've been trying out):
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /mnt/cdrom iso9660 ro,user,noauto,unhide 0 0
/dev/dvd /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/sda1 /boot ext2 defaults 0 1
/dev/sda2 / ext3 defaults 0 1
/dev/sda3 /var reiserfs defaults 0 1
/dev/sda4 /home ext3 defaults 0 1
/dev/sdb1 /extra ext3 defaults 0 1
#/dev/sdc1 /media/disk defaults 0 0
#UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk defaults 0 0
What am I doing wrong here? I've also tried to use different options like 'rw,auto,exec' but it won't work.

It seems I'm able to mount the disk from the terminal by doing '# sudo mount UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk'.
But this only works when I do it manually. Adding 'mount UUID=94911fb3-def7-4440-b6a5-5e09f91b19f6 /media/disk' to rc.local only gives the error that filesystem must be defined and when it's defined I get the error that device is not found.
How can it work manually, but not in fstab or rc.local?
Here's my dmesg:
BIOS EBDA/lowmem at: 0009f800/0009f400
Linux version 2.6.28-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Mon Feb 2 22:22:59 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.4 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x7fef0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f400 (usable)
modified: 000000000009f400 - 00000000000a0000 (reserved)
modified: 00000000000f0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007fef0000 (usable)
modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
modified: 00000000e0000000 - 00000000f0000000 (reserved)
modified: 00000000fec00000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-16000
RAMDISK: 7fe0e000 - 7fedf2e4
Allocated new RAMDISK: 0055f000 - 006302e4
Move RAMDISK from 000000007fe0e000 - 000000007fedf2e3 to 0055f000 - 006302e3
ACPI: RSDP 000F8600, 0014 (r0 HP-CPC)
ACPI: RSDT 7FEF3040, 0038 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: FACP 7FEF30C0, 0084 (r2 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: DSDT 7FEF31C0, 3C55 (r1 HP-CPC AWRDACPI 1000 MSFT 100000E)
ACPI: FACS 7FEF0000, 0040
ACPI: SSDT 7FEF6F40, 01CA (r1 HP-CPC POWERNOW 1 LTP 1)
ACPI: SRAT 7FEF7180, 00A0 (r1 HP-CPC HAMMER 1 AMD 1)
ACPI: MCFG 7FEF7280, 003C (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: APIC 7FEF6E80, 0068 (r1 HP-CPC AWRDACPI 42302E31 AWRD 0)
ACPI: Local APIC address 0xfee00000
1158MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00012000 - 00018f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520]
#4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000]
#5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [000055f000 - 00006302e4] NEW RAMDISK ==> [000055f000 - 00006302e4]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
found SMP MP-table at [c00f46e0] 000f46e0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007fef0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007fef0
On node 0 totalpages: 523903
free_area_init_node: node 0, pgdat c0406600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2318 pages used for memmap
HighMem zone: 294372 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
PERCPU: Allocating 36864 bytes of per cpu data
NR_CPUS: 16, nr_cpu_ids: 2, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
Kernel command line: root=/dev/sda2 ro quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2188.552 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Scanning for low memory corruption every 60 seconds
Memory: 2072040k/2096064k available (2227k kernel code, 22632k reserved, 1026k data, 332k init, 1186760k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc0433000 - 0xc0486000 ( 332 kB)
.data : 0xc032cfd9 - 0xc042db5c (1026 kB)
.text : 0xc0100000 - 0xc032cfd9 (2227 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4378.48 BogoMIPS (lpj=7295173)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080926
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4379.66 BogoMIPS (lpj=7295468)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 01
Brought up 2 CPUs
Total of 2 processors activated (8757.15 BogoMIPS).
net_namespace: 768 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 18 io port: [0x4100-0x411f]
pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:12.0: reg 10 io port: [0xfe00-0xfe07]
pci 0000:00:12.0: reg 14 io port: [0xfd00-0xfd03]
pci 0000:00:12.0: reg 18 io port: [0xfc00-0xfc07]
pci 0000:00:12.0: reg 1c io port: [0xfb00-0xfb03]
pci 0000:00:12.0: reg 20 io port: [0xfa00-0xfa0f]
pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f1ff]
pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10 io port: [0x500-0x50f]
pci 0000:00:14.0: reg 14 32bit mmio: [0xfe02b000-0xfe02b3ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
pci 0000:00:14.1: reg 20 io port: [0xf800-0xf80f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfb000000-0xfbffffff]
pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfcffffff]
pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:01.0: reg 10 io port: [0xdf00-0xdfff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:03.0: reg 10 io port: [0xde00-0xdeff]
pci 0000:02:03.0: reg 14 32bit mmio: [0xfdeff000-0xfdeff0ff]
pci 0000:02:03.0: reg 30 32bit mmio: [0x000000-0x00ffff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:04.0: reg 10 32bit mmio: [0xfdefe000-0xfdefe7ff]
pci 0000:02:04.0: reg 14 io port: [0xdd00-0xdd7f]
pci 0000:02:04.0: supports D2
pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
pci 0000:02:04.0: PME# disabled
pci 0000:00:14.4: transparent bridge
pci 0000:00:14.4: bridge io port: [0xd000-0xdfff]
pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff]
pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
pci 0000:00:00.0: BAR 3: can't allocate resource
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: mem resource (0xf0000-0xf3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xf4000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp 00:09: mem resource (0x100000-0x7feeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0x228-0x22f has been reserved
system 00:01: ioport range 0x40b-0x40b has been reserved
system 00:01: ioport range 0x4d6-0x4d6 has been reserved
system 00:01: ioport range 0xc00-0xc01 has been reserved
system 00:01: ioport range 0xc14-0xc14 has been reserved
system 00:01: ioport range 0xc50-0xc52 has been reserved
system 00:01: ioport range 0xc6c-0xc6d has been reserved
system 00:01: ioport range 0xc6f-0xc6f has been reserved
system 00:01: ioport range 0xcd4-0xcdf has been reserved
system 00:01: ioport range 0x4000-0x40fe has been reserved
system 00:01: ioport range 0x4210-0x4217 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x87f has been reserved
system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
system 00:09: iomem range 0x7ff00000-0x7fffffff has been reserved
system 00:09: iomem range 0x7fef0000-0x7fefffff could not be reserved
system 00:09: iomem range 0xffff0000-0xffffffff has been reserved
system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:09: iomem range 0xfff80000-0xfffeffff has been reserved
pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
pci 0000:00:02.0: IO window: 0xe000-0xefff
pci 0000:00:02.0: MEM window: 0xfa000000-0xfcffffff
pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:02
pci 0000:00:14.4: IO window: 0xd000-0xdfff
pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff
pci 0000:00:14.4: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
pci 0000:00:02.0: setting latency timer to 64
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffff]
bus: 01 index 0 io port: [0xe000-0xefff]
bus: 01 index 1 mmio: [0xfa000000-0xfcffffff]
bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 io port: [0xd000-0xdfff]
bus: 02 index 1 mmio: [0xfde00000-0xfdefffff]
bus: 02 index 2 mmio: [0xfdd00000-0xfddfffff]
bus: 02 index 3 io port: [0x00-0xffff]
bus: 02 index 4 mmio: [0x000000-0xffffffff]
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 836k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie01: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /class/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 332k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
ata2.00: ATAPI: HP DVD Writer 740b, ED24, max UDMA/33
ata2.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM HP DVD Writer 740b ED24 PQ: 0 ANSI: 5
sata_sil 0000:00:12.0: version 2.3
scsi2 : sata_sil
scsi3 : sata_sil
ata3: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f080 irq 22
ata4: SATA max UDMA/100 mmio m512@0xfe02f000 tf 0xfe02f0c0 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/100
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: WDC WD2500JS-60MHB1, 10.02E01, max UDMA/100
ata4.00: 488397168 sectors, multi 16: LBA48
ata4.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
scsi 3:0:0:0: Direct-Access ATA WDC WD2500JS-60M 10.0 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02c000
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02e000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02d000
sda1 sda2 sda3 sda4
sd 2:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 3:0:0:0: [sdb] Attached SCSI disk
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
usb 1-7: new high speed USB device using ehci_hcd and address 5
usb 1-7: configuration #1 chosen from 1 choice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
usb 2-2: new low speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
8139too Fast Ethernet driver 0.9.28
8139too 0000:02:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xf8182000, 00:13:d3:88:fb:ec, IRQ 20
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
lirc_dev: IR Remote Control driver registered, major 61
lirc_mceusb2: Philips eHome USB IR Transceiver and Microsoft MCE 2005 Remote Control driver for LIRC $Revision: 1.44 $
lirc_mceusb2: Daniel Melander <[email protected]>, Martin Blatter <[email protected]>
usbcore: registered new interface driver lirc_mceusb2
usb 3-1: new full speed USB device using ohci_hcd and address 2
C-Media PCI 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
usb 3-1: configuration #1 chosen from 1 choice
input: Power Button (FF) as /class/input/input1
usb 3-1: reset full speed USB device using ohci_hcd and address 2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_mceusb2[2]: Philips eHome Infrared Transceiver on usb3:2
usb 3-2: new low speed USB device using ohci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
usb 3-4: new full speed USB device using ohci_hcd and address 4
usb 3-4: configuration #1 chosen from 1 choice
Linux agpgart interface v0.103
usbcore: registered new interface driver hiddev
scsi 1:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 3:0:0:0: Attached scsi generic sg2 type 0
input: Logitech HID compliant keyboard as /class/input/input3
generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:13.0-2/input0
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
input: Logitech HID compliant keyboard as /class/input/input4
generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:13.0-2/input1
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input5
generic-usb 0003:045E:0047.0003: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.1-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nvidia: module license 'NVIDIA' taints kernel.
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x500, revision 0
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
input: PC Speaker as /class/input/input6
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi5 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
ohci1394 0000:02:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdefe000-fdefe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Error: Driver 'pcspkr' is already registered, aborting...
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009
EXT3 FS on sda2, internal journal
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000bc42b8]
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 5:0:0:0: [sdc] Attached SCSI removable disk
sd 5:0:0:0: Attached scsi generic sg3 type 0
scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:0: Direct-Access ST316002 3A 8.01 PQ: 0 ANSI: 0
sd 5:0:0:1: [sdd] Attached SCSI removable disk
sd 5:0:0:1: Attached scsi generic sg4 type 0
scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sd 4:0:0:0: [sde] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 03 00 00 00
sd 4:0:0:0: [sde] Assuming drive cache: write through
sde: sde1
sd 4:0:0:0: [sde] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
sd 5:0:0:2: [sdf] Attached SCSI removable disk
sd 5:0:0:2: Attached scsi generic sg6 type 0
scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 5:0:0:3: [sdg] Attached SCSI removable disk
sd 5:0:0:3: Attached scsi generic sg7 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on sde1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
TCP(wget:15427): Application bug, race in MSG_PEEK.
TCP(wget:18681): Application bug, race in MSG_PEEK.
TCP(wget:4122): Application bug, race in MSG_PEEK.
TCP(wget:4275): Application bug, race in MSG_PEEK.
TCP(wget:19451): Application bug, race in MSG_PEEK.

10.6.3 disk won't mount on intel iMac

I have an intel 3.06 GHZ Core 2 Duo iMac running 10.5.8. I purchased Snow Leopard family pack 10.6.3. I installed the disk but after about a minute it dismounts and gets ejected. Won't display on desktop. What's up?

Or the disc itself could be damaged, possibly as a result of use in some other Mac with a dirty optical drive or contamination or scratches from handling it between uses. Look carefully at the surface of the disc for scratches or contaminants, which may be faint & hard to see.

Disk Won't Mount - Broken Pipe

I'm no longer able to mount disk images that I have downloaded. Double-clicking on the downloaded .dmg gives me a cryptic message: "The following image failed to mount." "Reason: Broken pipe"
I attempted to mount it using the hdiutil command and got the following:
michael-babcocks-computer:~ MB$ hdiutil attach /MacOSXUpdCombo10.4.9Intel.dmg
dyld: lazy symbol binding failed: Symbol not found: _DIGetLocalKey
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
Expected in: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
dyld: Symbol not found: _DIGetLocalKey
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
Expected in: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
hdiutil: attach failed - Broken pipe
So far I have done the following:
Repaired permissions
Verified disk with Disk Utilities (passed verification)
Rebuilt directory with DiskWarrior
Checked file structure with DiskWarrior
Ran Tech Tools Pro 4.5.1 to repair structures & files
Uninstalled WindowShade 4.1.2 & APE
Purged all caches with both Cocktain & Cache Out X
Zapped the PRAM
Anything I can do, short of a system re-install? I've got a (Intel) Mac Pro running 10.4.9 -- It seems to have happened after downleading the 10.4.9 upgrade via Software Update.
MacPro Mac OS X (10.4.9)

I too accepted the Software Update, as I always have in the past, and so I downloaded the 10.4.9 update on my MacPro. The installer for the System Update (third installer to run, after Quicktime and iTunes) gave me the "disk image failed to mount: broken pipe" message. From then on I have not been able to mount any DMG files.
If I use "hdiutil mount" in Terminal on any DMG I get this sort of output:
2007-03-20 23:27:59.400 hdiutil[483] CFLog (21): dyld returns 2 when trying to load /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin
2007-03-20 23:27:59.400 hdiutil[483] CFLog (22): Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x31b420 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
2007-03-20 23:27:59.570 diskimages-helper[484] CFLog (21): dyld returns 2 when trying to load /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin
2007-03-20 23:27:59.570 diskimages-helper[484] CFLog (22): Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x324f70 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
2007-03-20 23:27:59.581 diskimages-helper[484] CFLog (21): dyld returns 2 when trying to load /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin
2007-03-20 23:27:59.581 diskimages-helper[484] CFLog (22): Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x324f70 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
dyld: lazy symbol binding failed: Symbol not found: _DIGetLocalKey
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
Expected in: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
dyld: Symbol not found: _DIGetLocalKey
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
Expected in: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
So if I remove the "DiskImages" folder that contains "/Library/Plug-Ins/VirtualPCDiskImagePlugin.bundle" (a suggestion I found at Macintouch) I get a smaller subset of the same message (though why would hdiutil have anything to do with VirtualPC in the first place) :
dyld: lazy symbol binding failed: Symbol not found: _DIGetLocalKey
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
Expected in: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
dyld: Symbol not found: _DIGetLocalKey
Referenced from: /System/Library/PrivateFrameworks/DiskImages.framework/Resources/diskimages-hel per
Expected in: /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
hdiutil: mount failed - Broken pipe
A search for the term "_DIGetLocalKey" in Google returns NO links. Nothing at all in billions of webpages? What's with that? However, I've seen enough posts on this very topic to see that it has been a common experience for the update to 10.4.9.
Other than going back to 10.4.8 and using the Combo Installer, is there something that can be done to fix this specific problem?
For example: Might there be a problem in the DiskImages Framework?
MacPro Mac OS X (10.4.9)

Time Capsule Hard Drive (hard disk) Won't Mount

I just purchased a new 1TB Time capsule. I installed the software on the disc out of the box as required, then started up TC and it installed the new Firmware 7.3.2 and I was good for internet wirelessly and via ethernet. BUT the main feature, the access to its internal 1TB Hard Drive NEVER mounts. I can't find it anywhere. Light on TC is steady green.
After reading the discussions no clues either. I tried downgrades to 7.3.1 firmware but still not Hard Drive to access anywhere.
HELP!
Kurt

Replaced the Time capsule, avoided firmware update 7.3.2 and jumped straight to 7.4.1.
Now all works fine.
truk

OS X 10.5 Leopard install disk won't mount

I'm running OS X 10.4.11 on an iMac G4 and want to upgrade to OS X 10.5. I bought a retail 10.5.1 installation DVD set but I can't get the disks to mount on my iMac G4. I've tried loading it in with OS 10.4 running and I've tried starting up from the 10.5 disk holding down the C key. I've also tried starting up holding down the option key. Nothing seems to work. The disk does not show up in disk utility. The disks are apparently ok because I can mount them on my intel iMac as a test.
Any help would be greatly appreciated.
Thank you

Some Macs are not able to boot from USB drives.
These options come to mind:
1 - Make a bootable USB stick - very slow and painful - several tutorials on the web
2 - Make a reduced (single layer DVD) - not too difficult - I have done it several times - let me know if you decide to do this - I can give you a list of items to remove.
3 - Partition your G4 hard drive, boot into installer on one volume and install onto the other volume - very fast and easy - useful in the future - if G4 has important data this will need backing up to another disk first as partitioning normally erases the whole disk.
For 3:
1 - If necessary backup all data, and perhaps whole disk, to another disk with eg Carbon Copy Cloner
2 - Use Tiger install CD/DVD to partition G4 disk - can be equal volumes or perhaps make one about 10 GB for installer.
3 - Install Tiger onto one volume - the larger one if they are different
4 - Boot into Tiger volume
5 - Use Carbon Copy Cloner to clone Leopard installer onto the other volume
6 - Boot into installer and use it to replace Tiger with Leopard
In future you can use the installer volume in the same way that you would use an installer DVD for repair or reinstalls etc.
Good luck.

HT3275 My backup disk won't mount on my desktop. The preferences window says it is not available. I am runng Lion on a late 2007 Macbook.

My external backup disk will not show up on my desktop anymore. Always did before. Using WD external backup disk.Any suggestions?

Try power cycling the entire network
That means powering off every device in any order that you want
Wait a few minutes
Start the modem first and let it run 2-3 minutes
Start the next device connected to the modem next, and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network for proper operation

10.5.7 update: Bluetooth gone, disks won't mount

Similar Messages

Maybe you are looking for