10.5.7 Update not showing in Installed Updates log

Hello everyone!
Not sure if this is some type of problem or not but I'm checking with you guys before I do something drastic like reinstall Leopard or something.
I installed the 10.5.7 update yesterday on my iBook G4. After I installed it, the computer hanged only showing my desktop and dock (no menu bar). After a while, I manually powered off the iBook, turned it on and saw it boot, restart, and boot back up. I updated Safari 4 beta after that. Then I checked the Installed Updates log on System Preferences and it showed the Safari update but not the 10.5.7 update. I thought there might be something wrong so I downloaded the Combo Update, repaired permissions and installed the update again. No hang this time, it restarted but it did do that boot-restart-boot again thing again. Tried it twice now and the 10.5.7 update is still not showing in the Installed Updates log even though in About This Mac it does say I'm running 10.5.7.
Is that normal? Are others having this issue?

Suggest you read my tip at
http://discussions.apple.com/thread.jspa?threadID=2004922&tstart=0
on how to get 10.5.7 to display in you installed updates
System Preferences/Software Update/Installed Updates

Similar Messages

  • I purchased my macbook pro with Lion pre-installed. However its not showing as "installed" from the app store. How can I re-install?

    As the title says, I just bought my macbook pro. I'd like to reinstall Lion. However its not showing as "installed" in my app store? So How can I reinstall it?

    No. Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    diskutil list
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.

  • Custom Inserted HTTP Header not showing up in Iplanet Logs

    ALL:
    I have some iPlanet Enterprise/6.0 web servers sitting behind a LoadBalancer. The LoadBalancer is setup in an 'one-armed mode', and takes a client HTTP request passes it onto the server, but during this process, changes the client source IP to that of local static IP that the LoadBalancer has. Due to our setup we cannot change this.
    By changing the client source IP to a local address, we have lost any useful user session tracking that was done by source IP.
    To get around this, I have the LoadBalancer inserting an HTTP header with the client real source IP. Reading the NSAPI Programmer's Guide (Table 7-1 "http://docs.sun.com/source/816-5686-10/07_magnu.htm"), there is an option "%Req->headers.headername%" that can be used with 'flex-int' to log any header value.
    My output from snoop looks as follows:
    HTTP: ----- HyperText Transfer Protocol -----
    HTTP:
    HTTP: GET /plugin.do HTTP/1.1
    HTTP: OrigClientAddr:10.5.4.28
    HTTP: Accept: image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, application/x-shockwave-flash, */*
    HTTP: Accept-Language: en-us
    HTTP: Accept-Encoding: gzip, deflate
    HTTP: User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)
    HTTP:
    I have set the value to "%Req->headers.OrigClientAddr%" and it still does not show up in the log file. Any clues?
    Works fine in Apache with:
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{OrigClientAddr}i\" \"%{User-Agent}i\"" headerinsert
    CustomLog logs/access_log headerinsert

    Always nice to find resolution to one's own question.
    Fix was to change the header value to all lower case.
    From:
    "%Req->headers.OrigClientAddr%"
    To:
    "%Req->headers.origclientaddr%"

  • Why will all the phone numbers on my phone not show up when I log into iCloud on my computer?

    Why will all the phone numbers on my phone not show up when I log into iCloud on my home computer?

    Hello tamivw,
    I read your post and I have linked to an article that will instruct you on how to access your iCloud contacts on a computer:
    This article is for Windows:
    iCloud Control Panel 3.1 for Windows
    http://support.apple.com/kb/DL1455
    This article will help you access the iCloud preferences where you can enable contact syncing:
    iCloud: Open iCloud preferences
    http://support.apple.com/kb/PH12802
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT1338 Some Purchased Apps not showing as installed

    I have apps loaded on my MBP and some don't show as installed when I log in to App Store and check for updates.
    Current Aperture version is 3.2 and when I apply an update is says i need 3.0 for the update.  Aperture is one of the Apps showing as not installed.
    Any suggestions?

    Hope these screenshots explain it better.
    Most of the apps with 'install' next to them in the second pic have already been installed

  • Control pannel not showing some installed programs

    my os is win 7 and my control pannel is only showing google chrome and microsoft . net framework 4 client and ms office enterprise.but i have installed many programs such as mozila,adobe reader,avast antivirus and so many others but they are not showing
    in my control panel programs..but at present they are working properly they are opening i am not having trouble with that..but i want to uninstall some programs and not finding a way i used even c cleaner tools but of no use..i started system scan but of no
    use..pls suggest a solution

    Hi,
    When you launch Control Panel\Programs and Features, aren't you able to find the installed programs there?
    All programs icons stored under control panel\Programs and Feature are related with registry keys
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
    and
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432node\Microsoft\Windows\CurrentVersion\Uninstall  (64 bit system)
    If these keys are corrupted or you don't have enough permissions on these keys, then the program icons will not be displayed under Programs and Features.
    Yolanda Zhu
    TechNet Community Support

  • Installed App Not Showing as Installed

    I'm a bit new to the whole Creative Cloud and I've installed a bunch of the suite which shows as installed, but Edge Animate refuses to show as installed.  Is there some sort of cache to clear or something to fix in order to show that app as installed or is this a limitation of the Edge software?

    Hi SnakEyez02,
    Are you on Windows or Mac?
    Is Edge Animate installed but still lists the install option within Adobe Application Manager?
    Where are you looking to see that its installed where its not showing up?
    -Dave

  • Successfully downloaded os x lion, but does not show as installed

    Bought and successively downloaded os x lion on my Mac, but does not show as installed

    That's one of the confusing things about the App store.  The app you purchase there is the Installer.
    If you've successfully run the installer then your Mac is on Lion but the last step of the install proceedure deletes the Installer from your apps directory.  The App store then reflects that the Installer is not installed on the system..  which is true.
    You can redownload the installer from the app store if needed.  If the installer is still in the Apps directory then you probably haven't installed Lion yet, just downloaded it.
    Regards,
    Captfred

  • Crystal Reports XI Release 2 Viewer Not showing when installed on 64-bit OS

    Hello,
    I'm having an issue with the Crystal Active X Report Viewer Control 11.5.  I've got a VB .NET 2005 application that uses this control to view a Crystal Report.  I created a Setup Project and added all of the required Merge Modules to it.  It installs perfectly on both 32-bit & 64-bit OSes, but the viewer control does not show up when I launch my application on the 64-bit OS (it works as expected on the 32-bit OS).  I've tried just about everything (including changing the target platform and using the Service Pack 6 Merge Modules among other things), but I just can't get it to work.  The application doesn't error or anything, the form is just completely empty.  Will this application work on a 64-bit OS?
    Thanks!

    Hi,
    This could be a good start:
    What do I need to do to get the fastest issue resolution?
    Next you might want to look here:
    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567
    If you find above helpful then look here
    How do I resolve  “'bobj' is undefined” issue?
    Hope that helps.
    - Saurabh

  • Customer information screen not showing when installing photoshop CS2 -- cannot enter serial number

    I own Adobe Premier CS2. When I run photoshop installation, customer information screen is not showing. So I cannot enter serial number. I have serial number.

    CS2: Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Time Machine does not show after installing Lion?!

    I upgraded to Lion and now my Time Machine does not work. When I connect the disk it starts and then shuts down. It does not show neither on desktop or on Time Machine. Any ideas. I hate the thought of reinstalling Snow Leopard but...
    Thank you in advance
    Matej

    No reason to reinstall Snow Leopard.
    What's shown on the Time Machine Preferences window for Latest Backup?  If it shows "Error" in red, see #C2 in Time Machine - Troubleshooting.
    If not, a clue may be lurking in your logs.  Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs.  Locate the backup in question, then copy and post all the messages here.

  • ILife '11 not showing as installed in Mac App Store

    I've been told that if you buy a new Mac it will show iLife '11 as installed in the Mac App Store so that you can then install the iLife '11 apps on your other macs without having to re-purchase iLife '11 on each computer.  I have a 2010 MacBook Pro and a 2011 MacBook Pro and I've signed into the Mac App Store using the same account on each computer but the iLife '11 app still shows as being purchaseable from both computers.  Any advice on how to get this to show as installed so that I can install it on my 2010 MBP without re-purchasing it?
    Thanks!

    Hi Dahveed,
    I just tried it but iLife doesn't show up in the Purchased pane on the Mac that came with iLife '11.  It's a 15-inch, Early 2011 MacBook Pro. 
    It's so strange.  Any suggestions for what to do next? 
    Thanks!

  • Contact name not showing in call/sms log even when I call/sms from my address book.

    Two things have changed on my phone recently.
    1. I ran the latest update 4.3.2
    2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
    I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number.  This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
    I've turned the phone off and on a couple of times.
    I would appreciate any advice.
    Cheers

    Thanks iraghib,
    In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
    Good luck. And thanks for the post.

  • Username not showing up in access log for authenticated users

    I'm using form-based authentication in a Java web application on Sun One Web Server v6.1 to restrict access to authenticated users. However, even after the users authenticate and access the application, the username field in the access log is showing them as anonymous.
    request.getRemoteUser() is reporting the correct username, so it just seems to be the access log that is in error. Right now it is set to the default but changing formats to custom doesn't seem to help in displaying the username.
    Here's an excerpt from the access log:
    // anonymous access attempt, redirects to login page...
    10.100.168.110 - - [01/May/2006:14:34:42 -0400] "GET /profile/index.jsp HTTP/1.1" 302 0
    10.100.168.110 - - [01/May/2006:14:34:42 -0400] "GET /profile/login.jsp HTTP/1.1" 200 3355
    10.100.168.110 - - [01/May/2006:14:34:47 -0400] "POST /profile/j_security_check HTTP/1.1" 302 0
    // at this point they are logged in and their username should be reflected in the access log, but is not:
    10.100.168.110 - - [01/May/2006:14:34:47 -0400] "GET /profile/index.jsp HTTP/1.1" 200 3532 And the relevant code from the web application's web.xml:
    <security-constraint>
        <web-resource-collection>
          <web-resource-name>AllFiles</web-resource-name>
          <description>
                     Restricts anonymous access.
                  </description>
          <url-pattern>/*</url-pattern>
          <http-method>POST</http-method>
          <http-method>GET</http-method>
        </web-resource-collection>
        <auth-constraint>
          <description>
                   Authenticated Users
                  </description>
          <role-name>user</role-name>
        </auth-constraint>
      </security-constraint>I've searched the forums and the manuals but can't see anything showing that the access log's username field doesn't work with form-based authentication. Can anyone shed some light on this?

    Some background:
    The Java Servlet container has its own authentication infrastructure (which is what you configure in web.xml) which is separate from the non-Java authentication infrastructure (ACLs, etc.). If you set up authentication via ACLs the resulting user identity can (though you may configure it not to) propagate to the Java Servlet container such that request.getRemoteUser() will return it, even though no web.xml-driven authentication occurred. The coverse is not true, however: if you authenticate via a Java Realm, based on web.xml configuration, that user identity is not available to non-Java code.
    (Your web.xml snippet doesn't show you using FORM auth - but it doesn't matter, the explanation above applies in any case.)
    That is why the log file (generated from non-Java code) doesn't have access to that user. It probably should, but there's no config option today for you to make that happen.
    If you're using BASIC auth you may consider moving the authentication configuration from web.xml to ACLs as a possible workaround. It will then show up in the access logs.
    If you prefer web.xml-based authentication, consider the <SECURITY audit="true"> option in server.xml. It won't be in the access log but you'll have an audit trail of authentications, which may help.

  • Errors detected, but not showing up in the Log

    Hi Experts!
    I've made a copy of "Set JavaRoleForUser&Group" pass from the SAP IDM Provisioning Framework for use in a Sync task. I'm working with IDM 7.2 SP8, back end is DB2. Repository is set and the background configuration is correct.
    However when the pass is executed, I get 253 errors but NONE of them show up in the log.  I've checked all varieties of log and I've also checked in the "\usr\sap\IdM\Identity Center\Jobs folder"
    <mx:NENTRIES noops="0" mods="0" markdels="0" dels="0" adds="0">0</mx:NENTRIES>
    <mx:NERRORS>253</mx:NERRORS>
    <mx:NWARNINGS>0</mx:NWARNINGS>
    No log exists.
    Is anyone aware of a way to get this information.  Clearly IDM and the SPML connector are seeing the error, but it's not piping back to the IDM log.
    Thanks,
    Matt

    Chris,
    I checked the jobs folder.... No prelog.log, just a DSE.log and a DSE_log.xml.
    Runtime logging already turned up. I'll check the tables and try the test mode.  Thanks.
    Follow up. I don't seem to have an mc_execution_log table, but I do have a mc_dispatcher_log table.  I don't see anything specific to my job.
    In the meantime, I'm directing the results to a text file via ToASCII so I can try and figure out what the deal is.
    Matt

Maybe you are looking for