10.5.7 upgrade and windows log in errors

Hi all
Hope someone can give me some feedback
I am running an Intel X-Serve which has been happily serving Mac's and Window's box's for the best part of a year. I upgraded the server to 10.5.7 over last weekend and all seemed good on Monday however yesterday several users ran into issues between log in and getting to the desktop.
The Wintel box's are all linked to the server via SMB and login to a domain, and the X-Serve is the only server on the local network.
Either the Windows box (All XP) could not copy files from the server and came up with an Error performing inpage operation. Or it could not load the roaming profile, either way Windows loads a temporary local profile for the user.
This is not all users just a handful
I have traced the issue to the users folders in /Users/profiles on the boot drive.
This issue seems to be how Windows syncs the info in the profile folder with the desktop.
Has anyone suffered this issue and knows a solution or workaround that does not involve me deleting the user off the server completely and rebuilding them at both the server and client ends? The profile only holds windows info, all files ( or at least they should be) are in home folders away from the users profile, so this is about allowing windows to log back into to the correct user on each Wintel box.
Any help would be appreciated
If you need more info from me just post it and I'll get back to you
Alex

Have you had any luck fixing the issue? I have 7 new Mac Pros running 10.5.7 and 42 new PC's with XP/SP3 and am having the profile sporadic corruption problem as well. Can't seem to find any information. Our previous 10.4 servers and last set of XP machines never had this problem.

Similar Messages

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

FaceTime and Messages log in error on Mac

FaceTime and Messages log in error on my iMac and Mac Mini. (OS X 10.8.2)
Getting a 'registration cannot be completed at this time message', but both worked fine before (when the iMac was in my office).
Both FaceTime and iMessage work on the iPad.
Running the home network through a near-new, still functioning Time Capsule.
Have logged out, tried logging in with a new Apple ID, and get the same result.
Help, please.

Sorry, I'm at a loss...
Try Apple's Express Lane...
https://expresslane.apple.com/

Adobe audition upgrade and windows 7

Hi ,
i want to know if Adobe audition can be upgrade and works propely with Windows 7 or Vista ...
i will change my computer soon ... can i use it on two computers or do i must make a transfer ? (is it an obligation)
Tanks

Vince cb wrote:
i want to know if Adobe audition can be upgrade and works propely with Windows 7 or Vista ...
The only upgrade to 3 is the 3.0.1 bugfix. Generally Auditio works fine with 32-bit W7, but results with 64-bit have, from the reports recieved, been variable. I wouldn't put Vista on a machine at all - it's dreadful.
i will change my computer soon ... can i use it on two computers or do i must make a transfer ? (is it an obligation)
You can audtenticate Audition on a total of two machines, but you are only allowed to use it on one at a time (it says in the licence conditions). You can transfer authentication though - so you could remove it from your old machine, and re-authenticate in on the new one.

Photoshop CS6 upgrade and Windows Vista

I own Photoshop CS5 and Windows Vista Home Premium 32-bit platform. Can I upgrade to CS6 ? Your upgrade ad and recent published info says that only platforms using Windows XP or Windows 7 are upgradable. What happened to Windows Vista ?

It works on Vista, even if it is not officialyl supported. Just be prepared that things like OpenGL support, tablet drivers etc. may act funny and some features may not work at all.
Mylenium

ITunes 8 upgrade and Windows Vista

I tried installing the iTunes 8 upgrade and have not been able to get it to install correctly. When it completes the installation, it says that it needs to reboot my system, so I tell it to go ahead and reboot. Once the system is rebooted, I click on the iTunes icon and iTunes starts to try to re-install again. This happens repeatedly. Any thoughts?
Thanks

Korgme986, jegar-
After you restart the computer, when you try to open up iTunes, try getting it from your Start > Programs menu. If you can open it that way, drag it from that menu to your desktop to re-create your shortcut. Perhaps it was somehow linked to your installer file rather than your application .exe file?
Dabbler-
Go into your Documents\Music\iTunes\ directory. Move the files called "iTunes Library.itl" and "iTunes Music Library.xml" to your desktop. Then, you should be able to open up iTunes. If so, click your File menu and choose Import (if running iTunes 8 it's File > Library > Import Playlist) and choose the iTunes Music Library.xml file that's been placed on your desktop.
Helio-
Whenever any Apple products are sent in for service Apple makes it very clear that it is not responsible for personal data left on those machines, and not backed up elsewhere. I'd imagine (although I'm not 100% positive) it would work the same for software. You might be able to find more information in Apple's legal documentation at http://www.apple.com/legal/. This is a user-to-user forum, so I'd be surprised if many people knew the specifics offhand.
Dean-
The iTunes downloads have always been free. Regarding the 2.1 update, specific to an iPhone or iPod touch... if you have an iPhone you don't need to pay for the update. Same for the iPod touch, 2nd generation (the one released this past Tuesday). If you have a 1st generation iPod touch for which you've already paid for the upgrade, the iPod software update files will remain on your computer, even if you uninstall/reinstall iTunes. In the event that you need to re-download a 2.x version, simply act as though you are going to pay for it again with the same Apple ID used to purchase it the first time, and iTunes will automatically prompt you to download it again for free.
CG

HP Laserjet P2055dn and windows 8 PCL6 error

Hello everyboby,
I have a network of two PCs and a networked HP Laserjet P2055dn. The PCs were in windows xp pro and everything go fine. I have changed their PCs with Hp Pro and windows 8 64bits as OS. Since the PCs are windows 8, both users have random PCL6 errors when they print. It does not occur everytime. I have updated the printer firmware to latest ==> same issue.
When i look at the printer configuration, i see that Laserjet P2055dn supports Pcll5e and ps but no PCL6. But on the HP site, for windows 8, there's only PCL5 and Ps driver !!! Anyway, i have tried each driver: PCL6, full software solution driver, Universal print ==> same issue.
Does anyboby has encounter this issue ? What is the solution ?
Thanks to everybody for interest, Sincerly yours, David from France

AlarconDavid,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Airport express and Windows 8 dns error message

I have just purchased a HP windows 8 machine. It works fine on my old Airport (5 years) wireless, but with the Airport express it does not. I can connect with CAT5 cable direct. When I bring up the available connections I see the airport express and pick it, type in the password and it says connected. Next I click on IE and I get the error message "This page can't be displayed" I run the fix connection problems and it says "Your DNS server might be unavailable". Check list of items.
1. Windows 8 wireless machine works fine on old Airport
2. Windows 8 direct connect works fine on Airport Express amd old Airport
3. Windows 7 wireless machine works fine on both old Airport and Airport Express
I am using the default settings on the Airport express except password is being used.
Windows 8 >>>wireless>>>Airport Express>>>router
As suggestions?

What are the model numbers of both your Extreme and Express base stations? Do you have them configured for a 802.11n (extended) or 802.11g (WDS) Wi-Fi network?

VCS Expressway event log errors when Jabber for iPhone and Windows log in

hi folks,
I've deployed Collaboration Edge with VCS Control and Expressway:
my Jabber for iPhone succesfully can log in from Internet and it can IM but not calls and I see next messages in VCS Expressway when Jabber is logging in:
2015-03-27T18:00:28+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49543" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 16:00:28,204"
2015-03-27T17:58:55+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49535" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:55,786"
2015-03-27T17:58:32+02:00
tvcs: Event="Authentication Failed" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49527" Detail="No valid authentication" Protocol="TLS" Method="REGISTER" Level="1" UTCTime="2015-03-27 15:58:32,202"
2015-03-27T17:58:08+02:00
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="49512" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 15:58:08,582"
"Digest User" in the "Protocol Specific Information" section of Phone Configuration selected right user. in this Jabber I see following error "Failed to get device configuration". however Jabber for Windows and for Android hasn't such issues - they succesfully can log in from Internet and it can do calls and IM but I see next messages in VCS Expressway when Jabber is logging in. The same log line appears when Jabber for Android log in:
tvcs: Event="Inbound TLS Negotiation Error" Service="SIP" Src-ip="Client-in-the-Internet-IPaddress" Src-port="56751" Dst-ip="Expressway-IPaddress" Dst-port="5061" Detail="No SSL error available, probably remote disconnect" Protocol="TLS" Level="1" UTCTime="2015-03-27 14:19:11,769"
and I can't find any information which describe such types of error.
thanks!

Thanks Srini, but the instructions have two options:
1. Use the Control Panel, select "Oracle 11g..." and uninstall from there.
This is of course the first thing I tried, but as I said, there is no entry for Oracle 11g in my "Programs and Features" applet.
2. Download the install package and run OracleXE.exe with the remove iss file.
Firstly, there is no OracleXE.exe in the package I downloaded, just setup.exe;
Secondly, setup.exe ignores the iss parameter and tells me that OracleXE is already installed (setup.log contains ResultCode=-3) so it can't be installed.
Is there somewhere else to get an OracleXE.exe that will work for 11g? Or are these the instructions for 10g and haven't been updated yet?
Am I unusual in not having a Control Panel entry?
(and I understand this is a beta - that's partly why I'd like to uninstall it - I'll go back to 10g and not be so impatient :))
Regards,
Andrew

Photoshop CS Upgrade and Windows 7

Hi,
I recently purchases a new laptop that has Windows 7 Professional 64 bit, I own Photoshop CS Upgrade that I previously ran on Windows Vista based machine. I was able to install my CS upgrade on the Vista machine after first installing Photoshop 4 and Phooshop 5.0 Upgrade. All of these versions I am the proud owner and have legitimate licenses.
Unfortunately, I am unable to install Photoshop CS Upgrade on my new Windows 7 Professional laptop becuase of the following:
- Windows 7 will not allow me to install Photoshop 4 and Photoshop 5.0.2 Upgrade prior to installing Photoshop CS or,
- Photoshop CS upgrade will not recognize the Photoshop 5.0.2 Upgrade CD and allow it to install.
Does anyone have any thoughts on how to proceed?
Best regards,
Don Barar

Hi Dan - My situation is nearly the same as yours. I recently purchases a new desktop that has Windows 7 Professional 64 bit, I own Photoshop CS Upgrade that I previously ran on my Windows XP based machine. I previously used my Phooshop 5.0 license as the basis to install Photoshop CS upgrade.
When I tried to install Photoshop CS the first time I could not get by the User Agreement screen. I kept clicking multiple "Agree" bottons and none of them worked. I then tried to load Photoshop 5 and it would not work in Windows 7 as it did in XP. I then called Adobe support and they recommended checking out the Forums.
After spending some time reading the user forums, I went back and tried to load Photoshop CS again. When I got to the User Agreement Svreen, I hit "Return" instead of clicking the "Agree" radio box. I learned that "Agree" was the default and that simply hitting the "Enter" key worked. The rest was easy. I entered the serial number of Photoshop CS and then it brought up 3 options for recognizing my old software. I chose the last option, then loaded my old Photoshop 5 disk on my CD/DVD drive and it automatically reconized the old software (Without actually running the "Setup.exe file). Then I took off the Photoshop 5 disc and remounted the Photoshop CS disc and continued with loading the Photoshop CS software.
So far Photoshop CS appears to be working fine on Windows 7. The Adobe support person said that it had not been tested on Windows 7. This was true with most of my old software and Photoshop CS was the last application on my list to get up and running.
Hope this helps you and some other users..

MARS and windows log timestamps

MARS 4.3.3 (2636) pulling logs off a windows 2003 server at 1 hour intervals. The MARS events seem to get timestamped in "clumps" at about 2-hour intervals e.g. 3000 events all timestamped within about a minute of 2:00, then nothing for a couple hours, then another 3 or 4000 events all timestamped within a minute or 2 of 4:00, etc. etc.
the logs on the windows box are all spread out across these "dead intervals" as expected - so it appears MARS is pulling the log and screwing up all the timestamps on the individual events as it parses them.
any help appreciated - thanks
-randy

reply from Cisco indicates that the log pull should be parsing the windows event timestamp info and applying to MARS events as they're generated.
i replied that this isn't the observed behavior here.
only other scenario (suggested) is that the MARS box is busy (from other work, windows pulls, etc.) and possibly has intermittent problems logging into this windows box at certain intervals, somehow screwing up the events on MARS. but I don't see any 'winpull" type errors in the backend log at all. Another suggestion is related to the time sync on the boxes - apparently if they're off then log data can get fubar'd. But none of this seems to apply here or correlate (pardon the pun) with what's going on. Still confused.
Anyway, i'm going to try to migrate to push agent asap - meanwhile any other hints or suggestions appreciated - will see if TAC comes back with anything more

QuickTime 7 Upgrade and Windows Movie Maker v6 Audio Problem

Since ITunes up graded my quick time player to the latest version I can no longer add audio to my movies made on Windows Movie Maker version 6. The application crashes. Uninstalling Quick Time player seven and installing Quick Time Player 6 solves the problem but I loose the use of ITunes. I have included the crash information how do I correct this issue.
Problem Event Name: APPCRASH
Application Name: MOVIEMK.exe
Application Version: 6.0.6000.16386
Application Timestamp: 4549b5b6
Fault Module Name: QuickTimeAudioSupport.qtx
Fault Module Version: 7.6.3.0
Fault Module Timestamp: 4837d2d4
Exception Code: c0000005
Exception Offset: 0013e9e2
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160

Any updates on this?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Windows 10 Preview load SL 9926 (upgrading from windows 8.1) Error 80070032

Follow the log from "WindowsUpdate" file:
After a long period sending "data" setup fails with error 80070032
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {4B9F6CAB-3750-47A4-9944-57EEA40AC186}.102 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {0CB1B9B6-7C8B-4D2F-92D3-F6C65375E09A}.200 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {7070A079-C202-4D3B-8359-F5E9662682EA}.201 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {AEA37390-ADFF-47F6-9383-C01E45E0878B}.200 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {4C86671F-DE10-430C-9F7D-F8677D3E28C7}.201 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {E46BBBA1-D5EF-49A4-82B3-35F0082C778C}.200 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {BD64895D-728D-435C-A608-04ADF7F5FD09}.200 to search result
2015-02-19 11:54:56:451
708 15d0
Agent Update {6CBBBB9B-0BE6-408C-835C-879BD892CE4B}.200 is pruned out due to potential supersedence
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {23A13D79-814D-4289-96F6-1A7F528A96EF}.200 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {70156CA0-8697-472B-B03D-C71559BAA4AA}.200 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Added update {38F052E8-0DEC-4E44-97AA-89D60C52C31F}.200 to search result
2015-02-19 11:54:56:451
708 15d0
Agent * Found 10 updates and 88 categories in search; evaluated appl. rules of 2691 out of 5243 deployed entities
2015-02-19 11:54:56:466
708 15d0
Agent *********
2015-02-19 11:54:56:466
708 15d0
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 42]
2015-02-19 11:54:56:466
708 15d0
Agent *************
2015-02-19 11:54:56:466
708 15d0
IdleTmr WU operation (CSearchCall::Init ID 42, operation # 764117) stopped; does not use network; is at background priority
2015-02-19 11:54:56:466
708 1684
AU >>## RESUMED ## AU: Search for updates [CallId = {2CBC89B5-ECA8-4F41-975B-BA32A343E1B3} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2015-02-19 11:54:56:466
708 1684
AU # 10 updates detected
2015-02-19 11:54:56:466
708 1684
AU #########
2015-02-19 11:54:56:466
708 1684
AU ## END ## AU: Search for updates [CallId = {2CBC89B5-ECA8-4F41-975B-BA32A343E1B3} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2015-02-19 11:54:56:466
708 1684
AU #############
2015-02-19 11:54:56:466
708 1684
AU All AU searches complete.
2015-02-19 11:54:56:466
708 1684
AU Adding timer:
2015-02-19 11:54:56:466
708 1684
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-19 19:22:34, not idle-only, not network-only
2015-02-19 11:54:56:466
708 1684
AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-1024816770-2381424383-3620500882-1001} Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
2015-02-19 11:54:56:466
708 1684
AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-1024816770-2381424383-3620500882-1001} Service {855E8A7C-ECB4-4CA3-B045-1DFA50104289}
2015-02-19 11:54:56:466
708 1684
AU # Publishing WNF Per user update count event Count: 2 SID {S-1-5-21-1024816770-2381424383-3620500882-1009} Service {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
2015-02-19 11:54:56:466
708 1684
AU # Publishing WNF Per user update count event Count: 0 SID {S-1-5-21-1024816770-2381424383-3620500882-1009} Service {855E8A7C-ECB4-4CA3-B045-1DFA50104289}
2015-02-19 11:54:56:466
708 1684
AU Adding timer:
2015-02-19 11:54:56:466
708 1684
AU Timer: E25CADF6-86A6-4569-BCDF-89BE66B0CA66, Expires 2014-11-28 16:35:58, not idle-only, not network-only

Hi Christian,
Could you please explain when you encounter this error code?
If this occurred when you installing Windows Update, you may try to download it/them from Microsoft Update catalog, and then install them manually.
If this is happened when you upgrade to the new build, you may consider to do a clean install using the Windows 10 9926 build ISO file.
Best regards
Michael Shao
TechNet Community Support

Problems with Labview and Windows XP with error -2147217865

Hello. Im a new beginner in Labview and am having a problem with a error message
I dont understand. Im running Labview on a pc-logger with windows XP.
The program is written by a guy on my university, and logs voltage from
a solar cell panel. He doesnt have the time to check in to it, so Im supposed to
find out what's wrong.
The error message is as follows :
Error -2147217865 occured at Cmd Execute.vi->DB Tools Insert
Data.vi->Solcelle.vi
Possible reasons :
Exception occured in Microsoft OLE DB Provider for ODBC Drivers,
[MySQL][ODBC 3.51 Driver][mysqld-3.23.38-log]Can't open file :
'solcelledata.MYD'. (errno: 145). in Rec Create - Command.vi-
>Cmd Execute.vi->DB Tools Insert Data.vi->Solcelle.vi
I really hope someone can tell me what's wrong and specifically what to do
with it, or possibly guide me to someone who could suggest a solution to this
problem.
Reguards
chrisdee

Hi Chrisdee,
(.. not to discount what TimoS has suggested, however...)
Embedded in the error information you provided:
... Can't open file : 'solcelledata.MYD'.
Sounds like the program needs this file? Has the program been moved to a new location?
just a wild guess!
Cheers
Message Edited by Dynamik on 10-06-2005 04:53 AM
When they give imbeciles handicap-parking, I won't have so far to walk!

Pro*C and not logged in error

Hi,
i tried rewriting the sample1.pc code so i could test it on a
client machine connecting to a DB host.
this is what CONNECT looks like:
EXEC SQL CONNECT :username IDENTIFIED BY :password
AT :hostname USING :dbsid;
then when i run:
[oracle@xonos proc]$ ./sample1
Connected to ORACLE as user: SCOTT
Enter employee number (0 to quit): 7900
ORACLE error--
ORA-01012: not logged on
i can run:
sqlplus scott/tiger@obiwan (obiwan is my DB server name)
it works fine.
any info would be most helpful.
thanks ahead of time,
-- adam
null

well, i find an Pro*C book and i saw what i was doing wrong.
the "using" is the host name, but i still do not know what "at"
is for, but i got more program working....
Adam (guest) wrote:
: Hi,
: i tried rewriting the sample1.pc code so i could test it on a
: client machine connecting to a DB host.
: this is what CONNECT looks like:
: EXEC SQL CONNECT :username IDENTIFIED BY :password
: AT :hostname USING :dbsid;
: then when i run:
: [oracle@xonos proc]$ ./sample1
: Connected to ORACLE as user: SCOTT
: Enter employee number (0 to quit): 7900
: ORACLE error--
: ORA-01012: not logged on
: i can run:
: sqlplus scott/tiger@obiwan (obiwan is my DB server name)
: it works fine.
: any info would be most helpful.
: thanks ahead of time,
: -- adam
null

10.5.7 upgrade and windows log in errors

Similar Messages

Maybe you are looking for