10.5.8 Server, Lost All Account Access
Yesterday (6/2/10), all accounts accessing the server stop working (expired passwords supposedly - everyone). Just finished complete reinstall of server 10.5, setup new accounts and appropriate access privileges. All working nicely. Ran updates, including combo to 10.5.8. Ran one more group of updates including Java for 10.5 Update 7 - then ALL GONE! Only Local Admin access to the computer functions. All Server accounts are gone, wiped out, cannot log into server.
Anyone else experiencing this type of problem? Solution?
I'm suspecting Java Update 7 is culprit.
Have you had any progress on this issue? I just experienced the same thing and am getting ready to start the troubleshooting process.
Similar Messages
-
Osx server lost all accounts after a reboot
We shutted down the server today in the room, everything shuted down normally except it took quite longer than usual to shutdown ( 6 or 7 mins )
we started the server back and the administrator account was not working anymore.
I resetted the password using the original cd, the utility shown only 2 accounts localadmin and root.
I logged using the localadmin account, none of the other accounts are there.
The workgroup utility is sending back an error message related to ldap.
I scanned the disk with disk utility, permissions need to be repaired and there is a lot of acl related errors. The drive filesystem seems to be corrupted too and also need to be repaired.
I'm not sure of what to do right now to bring back the setup on track, what kind of fuckup can cause this ? There is nothing fancy in that setup, it's just a file and internal webserver.
thx for any input.
regards
Message was edited by: blankbotjust to follow my first post
It seems that the filesystem get corrupted while shutting down, dunno if it's related to the fact osx is installed on a mirror raid ( but it's working pretty well since nearly a year ).
The rest of the install seems ok, I corrected most of the permission error ( using 32 000 thousands chmod commands ) and now we are kind of back on track.
anybody know if Linux is running well on a xserve ? -
My IBM blade server Lost all the Interfaces its running oracle linux 6.3
Hi am moses i installed oracle linux on ibm blade server and installed the ethernet, iscsi and fcoe drivers and it worked fine. but after there was an electrical blackout my oracle Linux server lost all
the eth* interfaces. Please assist on what to do because it contains installed application and we don't need to format it.The out put for dmesg is this:
io scheduler cfq registered
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
pcieport 0000:00:02.0: irq 66 for MSI/MSI-X
pcieport 0000:00:02.2: setting latency timer to 64
pcieport 0000:00:02.2: irq 67 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
pcieport 0000:00:03.0: irq 68 for MSI/MSI-X
pcieport 0000:00:11.0: setting latency timer to 64
pcieport 0000:00:11.0: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 70 for MSI/MSI-X
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:0c:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.0: Signaling PME through PCIe PME interrupt
pci 0000:16:00.1: Signaling PME through PCIe PME interrupt
pci 0000:16:00.2: Signaling PME through PCIe PME interrupt
pci 0000:16:00.3: Signaling PME through PCIe PME interrupt
pci 0000:16:00.4: Signaling PME through PCIe PME interrupt
pci 0000:16:00.5: Signaling PME through PCIe PME interrupt
pci 0000:16:00.6: Signaling PME through PCIe PME interrupt
pci 0000:16:00.7: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:11.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:11.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcieport 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcieport 0000:02:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0x90000000, mapped to 0xffffc90027900000, using 6144k, total 16384k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: APEI: Invalid bit width in GAR [0x7ed3b038/3/0]
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0x92301000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92300000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.39-200.24.1.el6uek.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
Refined TSC clocksource calibration: 1999.993 MHz.
Switching to clocksource tsc
usb 1-1: new high speed USB device number 2 using ehci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device number 3 using ehci_hcd
usb 1-1.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 2 ports detected
usb 2-1.1: new high speed USB device number 3 using ehci_hcd
usb 2-1.1: New USB device found, idVendor=ffff, idProduct=0248
usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.1: Product: Gadget USB HUB
usb 2-1.1: Manufacturer: no manufacturer
usb 2-1.1: SerialNumber: 0123456789
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 6 ports detected
usb 2-1.3: new full speed USB device number 4 using ehci_hcd
usb 2-1.3: New USB device found, idVendor=04b3, idProduct=4002
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: IBM MM2
usb 2-1.3: Manufacturer: IBM
usb 2-1.3: SerialNumber: 0000003012214
usb 1-1.2.2: new high speed USB device number 4 using ehci_hcd
usb 1-1.2.2: New USB device found, idVendor=04b4, idProduct=6560
usb 1-1.2.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.2.2:1.0: USB hub found
hub 1-1.2.2:1.0: 4 ports detected
usb 2-1.1.5: new high speed USB device number 5 using ehci_hcd
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
usb 1-1.2.2.3: new high speed USB device number 5 using ehci_hcd
usb 1-1.2.2.3: New USB device found, idVendor=0928, idProduct=0007
usb 1-1.2.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.3: Product: Mass Storage Plus
usb 1-1.2.2.3: Manufacturer: OEM
usb 1-1.2.2.3: SerialNumber: R8RQ6GKC900D1Z
usb 2-1.1.5: USB disconnect, device number 5
usb 2-1.1.5: new high speed USB device number 6 using ehci_hcd
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
generic-usb 0003:04B3:4002.0001: input,hidraw0: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input0
input: IBM IBM MM2 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
generic-usb 0003:04B3:4002.0002: input,hidraw1: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:00:1d.0-1.3/input1
input: OEM Mass Storage Plus as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2.3/1-1.2.2.3:1.1/input/input3
generic-usb 0003:0928:0007.0003: input,hidraw2: USB HID v1.11 Device [OEM Mass Storage Plus] on usb-0000:00:1a.0-1.2.2.3/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: num_devices not specified. Using default: 1
zram: Creating 1 devices ...
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
IMA: No TPM chip found, activating TPM-bypass!
rtc_cmos 00:03: setting system clock to 2013-09-03 14:54:17 UTC (1378220057)
Initializing network drop monitor service
Freeing unused kernel memory: 1508k freed
dracut: dracut-004-283.0.1.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
udev: starting version 147
udevd (141): /proc/141/oom_adj is deprecated, please use /proc/141/oom_score_adj instead.
usb 2-1.1.5: New USB device found, idVendor=04b3, idProduct=4010
usb 2-1.1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.5: Product: RNDIS/Ethernet Gadget
usb 2-1.1.5: Manufacturer: IBM
dracut: Starting plymouth daemon
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
mpt2sas version 13.100.00.00 loaded
scsi0 : Fusion MPT SAS Host
mpt2sas 0000:0c:00.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
mpt2sas 0000:0c:00.0: setting latency timer to 64
mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (41134540 kB)
mpt2sas 0000:0c:00.0: irq 71 for MSI/MSI-X
mpt2sas0-msix0: PCI-MSI-X enabled: IRQ 71
mpt2sas0: iomem(0x0000000092240000), mapped(0xffffc900100d8000), size(16384)
mpt2sas0: ioport(0x0000000000002000), size(256)
mpt2sas0: Allocated physical memory: size(4219 kB)
mpt2sas0: Current Controller Queue Depth(1865), Max Controller Queue Depth(2040)
mpt2sas0: Scatter Gather Elements per IO(128)
mpt2sas0: LSISAS2004: FWVersion(10.00.08.00), ChipRevision(0x03), BiosVersion(07.18.04.02)
mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)
mpt2sas0: sending port enable !!
Emulex LightPulse Fibre Channel SCSI driver 8.3.5.68.6p
Copyright(c) 2004-2011 Emulex. All rights reserved.
lpfc 0000:16:00.2: enabling device (0040 -> 0042)
lpfc 0000:16:00.2: PCI INT C -> GSI 36 (level, low) -> IRQ 36
lpfc 0000:16:00.2: setting latency timer to 64
lpfc 0000:16:00.2: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.2: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.2: PCI INT C disabled
lpfc 0000:16:00.3: enabling device (0040 -> 0042)
lpfc 0000:16:00.3: PCI INT D -> GSI 38 (level, low) -> IRQ 38
lpfc 0000:16:00.3: setting latency timer to 64
lpfc 0000:16:00.3: 0:1408 Port Failed POST - portsmphr=0x80000400, perr=x1, sfi=x0, nip=x0, ipc=x0, scr1=x0, scr2=x0, hscratch=x0, pstatus=x400
lpfc 0000:16:00.3: 0:1412 Failed to set up driver resource.
lpfc 0000:16:00.3: PCI INT D disabled
Initializing USB Mass Storage driver...
scsi1 : usb-storage 1-1.2.2.3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
scsi: waiting for bus probes to complete ...
scsi 1:0:0:0: CD-ROM IBM SATA DEVICE 81Y3658 IB01 PQ: 0 ANSI: 0
mpt2sas0: host_add: handle(0x0001), sas_addr(0x500507604d0112dc), phys(4)
mpt2sas0: port enable: SUCCESS
scsi 0:1:0:0: Direct-Access LSI Logical Volume 3000 PQ: 0 ANSI: 6
scsi 0:1:0:0: RAID1: handle(0x00b5), wwid(0x098d6d2781629507), pd_count(2), type(SSP)
scsi 0:1:0:0: qdepth(128), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:0:0: Direct-Access IBM-ESXS MK1401GRRB SC27 PQ: 0 ANSI: 6
scsi 0:0:0:0: SSP: handle(0x0005), sas_addr(0x5000039428005452), phy(0), device_name(0x5000039428005451)
scsi 0:0:0:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(0)
scsi 0:0:0:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
scsi 0:0:1:0: Direct-Access IBM-ESXS MK1401GRRB SC27 PQ: 0 ANSI: 6
scsi 0:0:1:0: SSP: handle(0x0006), sas_addr(0x500003942802c216), phy(1), device_name(0x500003942802c215)
scsi 0:0:1:0: SSP: enclosure_logical_id(0x500507604d0112dc), slot(1)
scsi 0:0:1:0: qdepth(254), tagged(1), simple(0), ordered(0), scsi_level(7), cmd_que(1)
sd 0:1:0:0: [sda] 285155328 512-byte logical blocks: (145 GB/135 GiB)
sd 0:1:0:0: [sda] Write Protect is off
sd 0:1:0:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3
sd 0:1:0:0: [sda] Got wrong page
sd 0:1:0:0: [sda] Assuming drive cache: write through
sd 0:1:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda3 for LVM logical volumes vg_sspaswl11g3/lv_root vg_sspaswl11g3/lv_swap
dracut: inactive '/dev/vg_sspaswl11g3/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_home' [15.00 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_swap' [19.68 GiB] inherit
dracut: inactive '/dev/vg_sspaswl11g3/lv_oracle' [50.00 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/mapper/vg_sspaswl11g3-lv_root
dracut: Loading SELinux policy
type=1404 audit(1378220065.747:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 2048 avtab hash slots, 250819 rules.
SELinux: 9 users, 12 roles, 3762 types, 187 bools, 1 sens, 1024 cats
SELinux: 81 classes, 250819 rules
SELinux: Permission audit_access in class file not defined in policy.
SELinux: Permission audit_access in class dir not defined in policy.
SELinux: Permission execmod in class dir not defined in policy.
SELinux: Permission audit_access in class lnk_file not defined in policy.
SELinux: Permission open in class lnk_file not defined in policy.
SELinux: Permission execmod in class lnk_file not defined in policy.
SELinux: Permission audit_access in class chr_file not defined in policy.
SELinux: Permission audit_access in class blk_file not defined in policy.
SELinux: Permission execmod in class blk_file not defined in policy.
SELinux: Permission audit_access in class sock_file not defined in policy.
SELinux: Permission execmod in class sock_file not defined in policy.
SELinux: Permission audit_access in class fifo_file not defined in policy.
SELinux: Permission execmod in class fifo_file not defined in policy.
SELinux: Permission syslog in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev dm-0, type ext4), uses xattr
type=1403 audit(1378220066.125:3): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
readahead: starting
udev: starting version 147
WARNING! power/level is deprecated; use power/control instead
be2net 0000:16:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.0: setting latency timer to 64
be2net 0000:16:00.0: POST error; stage=0x400
be2net 0000:16:00.0: PCI INT A disabled
be2net 0000:16:00.0: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.0 failed with error -1
be2net 0000:16:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.1: setting latency timer to 64
be2net 0000:16:00.1: POST error; stage=0x400
be2net 0000:16:00.1: PCI INT B disabled
be2net 0000:16:00.1: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.1 failed with error -1
be2net 0000:16:00.4: PCI INT A -> GSI 34 (level, low) -> IRQ 34
be2net 0000:16:00.4: setting latency timer to 64
be2net 0000:16:00.4: POST error; stage=0x400
be2net 0000:16:00.4: PCI INT A disabled
be2net 0000:16:00.4: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.4 failed with error -1
be2net 0000:16:00.5: PCI INT B -> GSI 37 (level, low) -> IRQ 37
be2net 0000:16:00.5: setting latency timer to 64
be2net 0000:16:00.5: POST error; stage=0x400
be2net 0000:16:00.5: PCI INT B disabled
be2net 0000:16:00.5: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.5 failed with error -1
be2net 0000:16:00.6: PCI INT C -> GSI 36 (level, low) -> IRQ 36
be2net 0000:16:00.6: setting latency timer to 64
be2net 0000:16:00.6: POST error; stage=0x400
be2net 0000:16:00.6: PCI INT C disabled
be2net 0000:16:00.6: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.6 failed with error -1
be2net 0000:16:00.7: PCI INT D -> GSI 38 (level, low) -> IRQ 38
be2net 0000:16:00.7: setting latency timer to 64
be2net 0000:16:00.7: POST error; stage=0x400
be2net 0000:16:00.7: PCI INT D disabled
be2net 0000:16:00.7: Emulex OneConnect 10Gbps NIC(be3) initialization failed
be2net: probe of 0000:16:00.7 failed with error -1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
cdc_ether 2-1.1.5:1.0: usb0: register 'cdc_ether' at usb-0000:00:1d.0-1.1.5, CDC Ethernet Device, 36:40:b5:d1:00:67
usbcore: registered new interface driver cdc_ether
sd 0:1:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:0: Attached scsi generic sg1 type 0
scsi 0:0:1:0: Attached scsi generic sg2 type 0
sr 1:0:0:0: Attached scsi generic sg3 type 5
input: PC Speaker as /devices/platform/pcspkr/input/input4
microcode: CPU0 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU1 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU2 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU3 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU4 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU5 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU6 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU7 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU8 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU9 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU10 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU11 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU12 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU13 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU14 sig=0x206d7, pf=0x1, revision=0x70b
microcode: CPU15 sig=0x206d7, pf=0x1, revision=0x70b
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
EXT4-fs (dm-0): re-mounted. Opts: (null)
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-3, type ext4), uses xattr
Adding 20635644k swap on /dev/mapper/vg_sspaswl11g3-lv_swap. Priority:-1 extents:1 across:20635644k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
NET: Registered protocol family 10
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.10 (March 21, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
usb0: no IPv6 routers present
802.1Q VLAN Support v1.8
bnx2fc: Broadcom NetXtreme II FCoE Driver bnx2fc v1.0.10 (Jan 22, 2011)
TARGET_CORE[0]: Loading Generic Kernel Storage Engine: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
TARGET_CORE[0]: Initialized ConfigFS Fabric Infrastructure: v4.0.0-rc7-ml on Linux/x86_64 on 2.6.39-200.24.1.el6uek.x86_64
TCM: Registered subsystem plugin: rd_dr struct module: (null)
TCM: Registered subsystem plugin: rd_mcp struct module: (null)
CORE_HBA[0] - TCM Ramdisk HBA Driver v4.0 on Generic Target Core Stack v4.0.0-rc7-ml
CORE_HBA[0] - Attached Ramdisk HBA: 0 to Generic Target Core TCQ Depth: 256 MaxSectors: 1024
CORE_HBA[0] - Attached HBA to Generic Target Core
RAMDISK: Referencing Page Count: 8
CORE_RD[0] - Built Ramdisk Device ID: 0 space of 8 pages in 1 tables
rd_dr: Using SPC_PASSTHROUGH, no reservation emulation
rd_dr: Using SPC_ALUA_PASSTHROUGH, no ALUA emulation
Vendor: LIO-ORG Model: RAMDISK-DR Revision: 4.0
Type: Direct-Access ANSI SCSI revision: 05
CORE_RD[0] - Added TCM DIRECT Ramdisk Device ID: 0 of 8 pages in 1 tables, 32768 total bytes
TCM: Registered subsystem plugin: pscsi struct module: ffffffffa056ece0
TCM: Registered subsystem plugin: fileio struct module: ffffffffa0575700
TCM: Registered subsystem plugin: iblock struct module: ffffffffa057a740
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
pci 0000:04:00.0: Invalid ROM contents
fuse init (API version 7.16)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
usb 1-1.2.2.1: new high speed USB device number 6 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi2 : usb-storage 1-1.2.2.1:1.0
scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg4 type 0
sd 2:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] No Caching mode page present
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
udev: starting version 147
udev: starting version 147
udev: starting version 147
udev: starting version 147
usb0: no IPv6 routers present
usb 1-1.2.2.1: USB disconnect, device number 6
usb 1-1.2.2.1: new high speed USB device number 7 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=058f, idProduct=6387
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Mass Storage
usb 1-1.2.2.1: Manufacturer: Generic
usb 1-1.2.2.1: SerialNumber: 68204C70
scsi3 : usb-storage 1-1.2.2.1:1.0
scsi 3:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi generic sg4 type 0
sd 3:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 1-1.2.2.1: USB disconnect, device number 7
usb 1-1.2.2.1: new high speed USB device number 8 using ehci_hcd
usb 1-1.2.2.1: New USB device found, idVendor=1e3d, idProduct=2093
usb 1-1.2.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2.2.1: Product: Flash Disk
usb 1-1.2.2.1: Manufacturer: USB 2.0
usb 1-1.2.2.1: SerialNumber: 0719440042B25701
scsi4 : usb-storage 1-1.2.2.1:1.0
scsi 4:0:0:0: Direct-Access USB 2.0 Flash Disk 5.00 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg4 type 0
sd 4:0:0:0: [sdb] 2052096 512-byte logical blocks: (1.05 GB/1002 MiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] No Caching mode page present
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
[root@sspaswl11g3 Desktop]# -
The server lost all my sync data after new OS install (I know my pass & key); How do I get it back?
Hello,
Ive been using sync on both my laptop and desktop in windows 7 and linux mint. Its been working great cross platform, but I recently formatted my drives and reinstalled everything. I obviously didn't save the Firefox passwords because I trusted the sync server to have it all. After a fresh OS install, I installed the latest ver of Firefox, logged in to my sync account and selected the default option for sync (both ways) knowing that the server has all my data and will download it onto my newly installed Firefox.
Unfortunately the server doesn't seem to have my data anymore as it didn't download any passwords I had saved and sync since before the full format/installation process.
How do I get it back now? Does the server has a roll back function?
Thank you
OviThank you again for your kind and prompt reply. I really appreciate it. I think the fact that I am transferring stuff from my old desktop PC to a new laptop has saved me. I copied all the apps from iTunes on the old desktop to a flashdrive, then added those apps (via Explorer!) into iTunes Media. Then I synched the phone. I have got all but 45 apps back, including the data!!! How awesome is that! It's 9.50 pm here in Australia and I have been sat in front of all this technology for about 15 hours now, so I'm giving up for the night. Perhaps tomorrow, somehow the lost 45 apps will magically appear. I haven't quite worked out which ones I'm missing as I'm so tired.
I want to thank you most sincerely though for taking the time to reply to me. You are wonderful.
Please, Heavenly Technology God, let this all work in the morning. -
ICal server lost all delegation suddenly & day by day - 10.6.8 OSX server
I really want to say how bad iCal Server is. It always lost all delegation after there are more then 10 people were setup in the delegation.
And it always lost connection, lost delegation, and never smooth. It is so bad that I would like to stop using this.
Is there anyone who know how to config it and make it better?Oh my goodness, i have the same issue and searching on resolution.
-
ICloud transition lost all email access
Hi,
I have read a few people are having issues with .mac / .me email once moved over to iCloud. Since my move everything is working fine, except email; this has not been working on Macbook, iPad & iPhone for 3 days now, it's now getting unbearable and I'm ready to throw all devices in the bin unless I know this is going to be fixed! (I'm in the middle of an overseas house sale with everythng on email!)
Has anybody else had no email access for this amount of time and is it just a case of wait even longer?
The main problem seems to be with p99-imap.mail.com.
Any suggestions before I unplug and put to the bin......
Thanks,
NickI have the same problem. For at least a day now, no email. I was travelling so don't know how long this has been going on. On top of that, my wife and daughter (on the same family account) have no problems. I have contacted Apple, they are reorganising my mailbox but that can take 24 hours they said.
I am a bit sad as well, it has worked for a few days since I migrated it from me to iCloud, but it is unacceptable to be without email for so long time, a useless service and it can cost us all a lot. I have been thinking to reroute all my personal email via gmail (I have a own website/email account that I can reroute to any other adress), since it seems that is working fine for ever. But what stops me is that my wife and daughter have no problems.
I have an appointment with a Genius, next thursday, and I wait till that 'rendez-vous' to decide whether to reroute my mail to gmail. -
Can't Reset Password. Lost all account info.
My husband's computer crashed. He's not very technically oriented and cannot remember his user name or password access for Itunes. I tried his email and it doesn't work. Nor does any other possible combination. So what's my next step. Do I set up a totally new user account? And if so -- how does that effect all the purchases he made that are on his ipod.
Also -- best way to synch once I have this set up so I don't lose all his songs? THanks all.Unfortunately -- that's the problem. The email we are putting in is not working. It's not senidng the password to the account. I even went ahead and tried to create a enw account with the email I thought it was and it accepted it which says to me -- we didn't have an account under that email. So -- basically -- we have no idea what email was used to set up the account.
So I think ever getting access to my account is over. Any advice on what to do so I don't lose all the music that was purchased? -
Mail crashed and lost all accounts
Mail just crashed, and whern I restated, it went back to defaults and all my accounts except .Mac have disappeared. My mailboxes are intact, except all mail in my inbox has disappeared. I know this info has to be on my HD somewhere, where do I find it and how do I get it back?
Hello David.
What is your hard drive capacity and available free space?
As a firs step, check this link for system troubleshooting procedures and when doing so, follow all steps/instructions in the order provided:
http://www.thexlab.com/faqs/repairprocess.html
When completed and with the Mail.app quit, using the Finder go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
If you have limited free hard drive space - well less than 5GB available, do not place the copy of the Mail folder on the Desktop - this needs to be place on an external drive or anywhere else.
Using the Finder go to Home > Library > Preferences > com.apple.mail.plist. Delete the com.apple.mail.plist file and empty the Trash.
Note: Deleting the com.apple.mail.plist file will require re-entering all email account information when relaunching Mail with the exception of your .Mac account.
Launch Mail and decline any prompt to import mailboxes.
After re-entering all other email account information the same as before, the Mail.app should rediscover the existing account named folders and mailboxes within the Mail folder at Home > Library > Mail.
After confirming all mailboxes were successfully rediscovered and all messages are available, you can delete the copy of the Mail folder. -
Have Wireless Connectivity and Ethernet connection
When I click to open IE browser a window opens but it remains blank and just hangs/locks up.
I had downloaded a Norton Update 2008, scanned and then had this issue. First Access Connections wouldn't connect at all nor would the ether. After a Lenovo System Restore I was able to at least get connectivity but no IE.
I have since removed all norton and done above. I currently have Wireless Connection and Ethernet but no Internet Access.
Thank you
Solved!
Go to Solution.FIXED!!! After 10 hours of searching and the like.....
Went to microsoft site and just needed to Restore and Reset Internet Options in the Advanced Tab.
I was determined not to pay the 2 hour minimum of $179per hr. $360 to lenovo. Not that lenovo hasn't been the best computer I have owned cause it has. My old IT Tech guy said once after giving me a new computer 10 years ago...repeat after me....I AM THE MASTER OF MY OWN COMPUTER...."good luck" LOL
This is an awesome forum.
Message Edited by rmte5280 on 08-09-2008 08:53 PM -
I was using my iTunes Library and it is now gone. I have my songs stored on an external drive. I checked the connections and they seem OK. I can't get the iTunes screen to show the sync button nor find my library. Does anyone have a suggestion?
Was the media solely on the external library? If so, it is likely that iTunes was started at some point with the external drive unaccessible. Simply point iTunes to the correct library location. To do this, close iTunes. Hold <SHIFT> and launch iTunes. When prompted to find library or create a new one, select the find option and point iTunes to where the iTuneslibrary.itl file is at on your computer (or external drive).
-
Have lost all FTP access for DWCS3
I just created a key for Ct for a client on my computer and
suddenly cannot establish an FTP connection for any of my sites. Is
there possibly some connection here between the two or purely
coincidental?Coincidence, I think.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Paevo Kelley" <[email protected]> wrote in
message
news:gea3bk$hof$[email protected]..
>I just created a key for Ct for a client on my computer
and suddenly cannot
> establish an FTP connection for any of my sites. Is
there possibly some
> connection here between the two or purely coincidental?
> -
I lost all me emails, what is mail set-up? Mail.me.com?
Incoming is imap.mail.me.com. Outgoing is smtp.mail.me.com (see http://support.apple.com/kb/HT4864). But if you're setting up iCloud mail on OS X Lion or higher, you go to Settings>iCloud and check Mail. This will add the account with the proper settings.
-
Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?
No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.
-
Lost all my mail in my inbox +my mail account
lost all my mail in my inbox +my mail account settings except @mac.com after a crash of my system.
When I rebooted my mac, a pop-up from mail was telling me that it had created a new folder called "distributed" in replacement of the usual "sent items" folder. This last folder is still there but is empty.
Can I somehow recuperate the settings as it was before the crash?Hi Jake, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
After we're sure those things are OK, we can go further. -
Windows 8 upgrade lost all my account settings
I just upgraded from Windows XP to Windows 8 and it deleted my Thunderbird program. SO, I reinstalled it but I've lost all my account settings and e-mail folders.
I stored my e-mail folders in another location, and they're still on my harddisk, but I no longer see an option for controlling where the e-mails are stored in this version of T-bird.
Do I have to manually recreate all my e-mail accounts again? And, after that...how do I get it to read my e-mail folders? I have thousands of e-mails that I must have access to. This is a disaster!
Please help.
Thank you so much!Thank you for your reply, but I don't think I was clear with the problem. I can find the account settings option. The problem is everything that was there before I installed Windows 8 is gone. I have to manually re-enter all my e-mail accounts, but all of my old e-mails are not showing up. I can get new e-mails (if I re-enter all the account information), but I have thousands of old e-mails and folders that I cannot access.
How do I get those folders back "into" Thunderbird? It doesn't allow me to import anything. I am only given the option to import from Outlook, and I don't even have outlook.
I was storing (at least I THINK I was storing) my e-mail files on a separate partition of my hard disk, and I THINK it's all still there, but there's no way to access those files for some reason on my newly installed Thunderbird.
Maybe you are looking for
-
Approval for Contract and Order based on PO date and Document Date Combinat
Dear All, I have a critical requirement from my client. 1. If the PO date in the contract is less than 10 days or more of the document date [Created date] then further process should not be allowed. Only authorized person should release the contr
-
Ios 5 possible firmware bug for iPhone 4; Voice command/text-to-speech doesn't work properly.
I upgraded an AT&T and Verizon iPhone 4 to the ios 5 firmware, and I am having the same exact issues for both phones. When using the voice command a few times, the audio voice does not come through the "speaker" (referring to the speaker located at
-
Changing the date and time in a 1240 ap
How do you change the date and time in a Cisco 1240AG AP
-
Bluetooth will not recognise my GPS
Can any one help, please? I have a PowerBook G4 1.25 GHz running Mac OS X, version 10.4.3 and want to use a BT-338 GPS with my ROUTE 66 Route 2004 Application. Although Bluetooth Preferences says that it has connected with the GPS, when I tell ROUTE
-
LR 3.6 Catalogue unable to be optimized
In Lightroom 3.5 and now 3.6 every attempt to optimize my catalogue results in the error message "Your catalog was not optimized and Lightroom must restart. Lightroom will check the catalog for damage when it resumes." Lightroom resumes, and everyt