10.5.8 server postfix sender domain problem

Hi,
I set up my power mac g5 as web and mail server. Everything is working wihout problem except this issue.
ı configure my webmail as webmail.xxx.com. when i try to send mail from mail server to other servers, i can see my mails in queue , i saw sender mail address as [email protected] if i change webmail adress to example.xxx.com this time i saw [email protected]
All the mail recipients saw like this. When i first think this must be a postfix configuration prorblem. i cannot see an extra settings about this in server admin panel.
So i changes the main.conf fie of postfix for smtp settings there are two choise $mydomain or $myhostname.
i caned it to mydomain but nothing changed. How can i fix it ?
Best regards

Is this a problem that only happens when sending from the webmail (SquirrelMail) client, or from all email client apps (Apple Mail, Outlook, Thunderbird, etc.)??
SquirrelMail, by default, uses the hostname entered in DNS as the originating address. So if you log in as User_1 and send via SquirrelMail and your email server is desginated as mail1.example.com, the sending address will show as "[email protected]"
You can over-ride this in the Settings of for each user in SquirrelMail by setting the email address to the proper value, as "[email protected]"
-Doug

Similar Messages

Unable to Connect to the Server and WLI Domain problem

Hi All
this is the details
I have installed installed WIntegration Server and using
quickstart click the Take to Platform tour I started all the servers
Note-- I have not installed separate weblogic server 7.0 and not started.
whenever I click started WebLogic Integration Studio and it shows
user --admin
password- security
url--t3://localhost:7001
once submit it shows always Unable to connect to the server
please help me ???????????????????????????????????????????/
Server is running fine I used quickstart--- Take the live platform tour to run
the below servers.
C:\bea\weblogic700\samples\platform\e2eDomain>"C:\bea\jdk131_08\bin\java" -hotsp
ot -Xms256m -Xmx256m -XX:MaxPermSize=256m -Xverify:none -Dcommerce.properties="
C:\bea\weblogic700\portal\weblogiccommerce.properties" -Dweblogic.jws.Production
Mode="false" -Dweblogic.servlet.ClasspathServlet.disableStrictCheck="true" -De2e
Sample.b2b.path.data=".\beaApps\e2eApp\data" -Dweblogic.Name=e2eServer -Dbea.hom
e="C:\bea" -Dweblogic.management.username= -Dweblogic.management.password= -Dweb
logic.ProductionModeEnabled=true -Dweblogic.management.discover=false -Djava.sec
urity.policy=="C:\bea\weblogic700\server\lib\weblogic.policy" weblogic.Server
Starting WebLogic Server...
<Aug 5, 2003 1:22:23 PM EDT> <Notice> <Management> <140005> <Loading configurati
on C:\bea\weblogic700\samples\platform\e2eDomain\.\config.xml>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090093> <No configuration data
was found on server e2eServer for realm CompatibilityRealm.>
<Aug 5, 2003 1:22:37 PM EDT> <Notice> <Security> <090082> <Security initializing
using realm CompatibilityRealm.>
<Aug 5, 2003 1:22:38 PM EDT> <Notice> <WebLogicServer> <000327> <Starting WebLog
ic Admin Server "e2eServer" for domain "e2eDomain">
<Aug 5, 2003 1:24:23 PM EDT> <Notice> <B2BIntegration> <000000> <INFO: WebLogic
Integration - B2Bi Server started successfully.>
INFO: WebLogic Integration - B2Bi Server started successfully.
<Aug 5, 2003 1:24:31 PM EDT> <Notice> <AI> <000000> <Started WebLogic Integratio
n - AI Server version 7.0.4.0>
<Aug 5, 2003 1:24:35 PM EDT> <Notice> <BPM> <000000> <Started WebLogic Integrati
on - BPM Server version 7.0.4.0>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After the server has booted, your browser should
automatically launch and point to the WebLogic Server
Index running on this server. If your browser
fails to launch, point your browser to the URL
"http://Inforicadb:7501/index.jsp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
=============== Initializing Logger ======================
<Aug 5, 2003 1:24:36 PM EDT> <Notice> <Management> <141053> <Application Poller
not started for production server.>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "SSLList
enThread.Default" listening on port 7502>
<Aug 5, 2003 1:24:46 PM EDT> <Notice> <WebLogicServer> <000354> <Thread "ListenT
hread.Default" listening on port 7501>
<Aug 5, 2003 1:24:47 PM EDT> <Notice> <WebLogicServer> <000329> <Started WebLogi
c Admin Server "e2eServer" for domain "e2eDomain" running in Production Mode>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000365> <Server state
ch
anged to RUNNING>
<Aug 5, 2003 1:24:48 PM EDT> <Notice> <WebLogicServer> <000360> <Server started
in RUNNING mode>
please help me, urgent
Thanks in advance
Domain problem---------------------------------------------
I created WLI domain like this is it correct ?
Next I used Quick start's --Configure New Server
then single server option radio selected
then
single server name--myserver
server listner address---????????? please tell me
server listening port 7001
ssl listnening port 7002
username bala
password subramaniam
verify password subramaniam
c:\bea\user_projects\CIBC
configure database mail--
email address- [email protected]
email host: what need to give ??????? please tell me----
after I created domain called CBC it is in the
c:\bea\user_projects\CBC
then I saw it consists
1)wlai folder
2)dbinfo
3)application
4)keys
5)scripts
setdatabase.cmd
startweblogic.cmd
startmanagedweblogic.cmd
setwlidomaindata.cmd
wliconfig.cmd
checkdomain.cmd
Wliconfig.jar
startweblogic.cmd
stopweblogic.cmd
I try to startweblogic.cmd it open and closed no action
please tell me what is the problem????????????
with regards
bala

Oh boy! Let me see what's going on. Are you using the VZW Cloud or the BUA app? Please try downloading the VZW Cloud app if you dont already have it. And once downloaded. Tap the 3 bars in the upper corner and go down to "TOOLS", then tap "RESTORE CONTENT". That should do it!
VanetrisC_VZW
Follow us on Twitter @VZWSupport

I am set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

I set up mac mini and when I test the mail server by sending a mail from administrator to administrator I get the error message 'Diagnostic-Code: X-Postfix; connect to 127.0.0.1[127.0.0.1]:10024: Connection refused'. Can any one suggest a solution

Thanks. Where could I possibly look for a firewall rule. I knowingly did not creat any. My system has internet coming to a Modem which then is connected to a wireless router. I have computers connecting to the router through cable as well as wireless. One of these computers has been our mailserver using Mercury and Pegasus and that computer has a static IP address. The Mac Mini also has been assigned a different srtatic IP address. I have only set up user account, none of them an email account as I initially expect them to receive only internal mails. Is it necessary that I must set up an email id for each user while setting up the user account. My server id is server.local. So would the email id for local users be [email protected]?

Another Mailman and virtual domains problem... mailbox does not exist

Hi,
this is yet another thread about virtual domain mailinglist with mailman.
To sum up:
- OpenDirectory account "[email protected]" -> mail delivered
- Deleting this account and creating a mailing-list "test11", opening the admin interface to change the host "server.domain.com" (which is the primary host of the machine, so each mailinglist is created with this host) and replacing it with "virtualdomain.com"
- sending an email to "[email protected]" -> following error:
Jan 18 14:12:23 server postfix/qmgr[74872]: 698E5BF735: from=<[email protected]>, size=691, nrcpt=1 (queue active)
Jan 18 14:12:23 server postfix/pipe[74882]: 698E5BF735: to=<[email protected]>, orig_to=<[email protected]>, relay=cyrus, delay=0.28, delays=0.14/0.01/0/0.13, dsn=5.6.0, status=bounced (data format error. Command output: test11: Mailbox does not exist )
- adding back the OD account "[email protected]" -> mail delivered to inbox (not to mailing-list recipients)
- now if i delete the mailinglist in Server Admin then send an email to "[email protected]" -> following error (seems obvious):
Jan 18 13:18:49 server postfix/lmtp[74275]: A9B7CBF45F: to=<[email protected]>, relay=server.domain.com[/var/imap/socket/lmtp], delay=0.16, delays=0.13/0/0/0.03, dsn=5.1.1, status=bounced (host server.domain.com[/var/imap/socket/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))
IOW, it looks like somehow the mailinglist aliases are being lost somewhere.
Postfix forgets to delivers the incomming mails to Mailman, doesn't it? According to lots of forum searchs it could be forced by using one of those two commands:
sudo /usr/sbin/postalias
sudo /usr/sbin/postmap
Unfortunately I dont know how they work precisely and can't find X.5 accurate information so I hope you can guide me through this step.
Also I don't know how to track the incomming mails at the moment they are dispatched to either an OD account (so it's delivered or generates the 550 error) or a Mailman list (so it's looking for aliases and so on).
Any help will be appreciated.
Config:
- in /etc/postfix/main.cf
virtual_transport = lmtp:unix:/var/imap/socket/lmtp
virtualmailboxdomains = hash:/etc/postfix/virtual_domains
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
virtualaliasmaps = hash:/etc/aliases,hash:/var/mailman/data/virtual-mailman
- in /etc/postfix/virtual_domains
virtualdomain.com allow
- in /var/mailman/data/virtual-mailman
# LOOP ADDRESSES START
[email protected] mailman-loop
# LOOP ADDRESSES END
# STANZA START: test11
# CREATED: Sun Jan 18 13:55:03 2009
[email protected] test11
[email protected] test11-admin
[email protected] test11-bounces
[email protected] test11-confirm
[email protected] test11-join
[email protected] test11-leave
[email protected] test11-owner
[email protected] test11-request
[email protected] test11-subscribe
[email protected] test11-unsubscribe
# STANZA END: test11
- in /var/mailman/data/aliases
# The ultimate loop stopper address
mailman-loop: /private/var/mailman/data/owner-bounces.mbox
# STANZA START: mailman
# CREATED: Sun Jan 18 14:11:53 2009
mailman: "|/usr/share/mailman/mail/mailman post mailman"
mailman-admin: "|/usr/share/mailman/mail/mailman admin mailman"
mailman-bounces: "|/usr/share/mailman/mail/mailman bounces mailman"
mailman-confirm: "|/usr/share/mailman/mail/mailman confirm mailman"
mailman-join: "|/usr/share/mailman/mail/mailman join mailman"
mailman-leave: "|/usr/share/mailman/mail/mailman leave mailman"
mailman-owner: "|/usr/share/mailman/mail/mailman owner mailman"
mailman-request: "|/usr/share/mailman/mail/mailman request mailman"
mailman-subscribe: "|/usr/share/mailman/mail/mailman subscribe mailman"
mailman-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe mailman"
# STANZA END: mailman
# STANZA START: test11
# CREATED: Sun Jan 18 14:11:53 2009
test11: "|/usr/share/mailman/mail/mailman post test11"
test11-admin: "|/usr/share/mailman/mail/mailman admin test11"
test11-bounces: "|/usr/share/mailman/mail/mailman bounces test11"
test11-confirm: "|/usr/share/mailman/mail/mailman confirm test11"
test11-join: "|/usr/share/mailman/mail/mailman join test11"
test11-leave: "|/usr/share/mailman/mail/mailman leave test11"
test11-owner: "|/usr/share/mailman/mail/mailman owner test11"
test11-request: "|/usr/share/mailman/mail/mailman request test11"
test11-subscribe: "|/usr/share/mailman/mail/mailman subscribe test11"
test11-unsubscribe: "|/usr/share/mailman/mail/mailman unsubscribe test11"
# STANZA END: test11
- in /usr/share/mailman/Mailman/mm_cfg.py
MTA = 'Postfix'
POSTFIXSTYLE_VIRTUALDOMAINS = ['virtualdomain.com','mail.virtualdomain.com']
add_virtualhost('virtualdomain.com', 'mail.virtualdomain.com')

I've finaly solved the problem by myself, mixing postfix-style aliases.
Since it's quite long I wrote a tutorial, it's here:
http://spip.ashorlivs.net/notepad/os-x/article/virtual-host-mailman-w-os-x-serve r
Hope it can help someone else.
Regards,
g.
Message was edited by: ashorlivs

Exchange Server 2010 Accepted Domain

Dear,
I have the following environment:
The company bought the company dominioA.com dominioB.com.
Both companies have mail system.
Company A wants to standardize the environment and wants only the mail platform remains in Exchange 2010 mail servers Company A.
to have many users, and also change the MX ip address, the company does not want to do all of one.
As I raise the following:
One Accepted Domain was created with the dominioB.com
An email policy which I think I will do that by creating the accounts you create them in an organizational unit and change them to dominioB.com SMTP.
Send mail testing was made from those accounts to accounts dominioA.com and there were no problems.
Send mail testing was done from the dominioB.com account to an external account and it worked.
Send test mail dominioA.com to DominioB.com and began to bounce post is made. because the mail server is in the domainB, and server Only the domain was created. for this to work one must change the MX, but the company wants to do it gradually.
As I can do ????
Waiting for your comments
Thank You,
Edwin Duran Ospina

Hi,
According to your description, I notice that you have two company, Company A and Company B. Then want to deploy only one Exchange server for mail flow.
If I misunderstand your concern, please do not hesitate to let me know.
If you want to deploy Only one Exchange server SMTP name for two company, I suggest we can deploy forest trust and linked mailbox for Company B’s user.
More details about Deploy Exchange 2010 in an Exchange Resource Forest Topology, for your reference:
https://technet.microsoft.com/en-us/library/aa998031(v=exchg.141).aspx
Best Regards,
Allen Wang

Envelope sender domain could not be resolved

For this error:
Apr 23 18:11:07 2008 Info: ICID 815272710 Address: <nurmaria> sender rejected, envelope sender domain could not be resolved
If the domain has multiple MX(es) record. I.e cardig.com has :
cardig.com mail is handled by 10 mail.cardig.com.
cardig.com mail is handled by 10 mail2.cardig.com.
Does Ironport check all the mx(es) first then reject if one of them is not exists?
Or just query it once (first match mx or first low priority mx)?
TIA.

I think that the problem is not related to MX records existence or priority.
The error you found occurs when a DNS server does not provide an answer to the query your appliance send when checking the sender.
Suppose that a remote SMTP server connect to your appliance and send a "MAIL FROM: user @ domain.com" SMTP command; at this point your appliance checks whether "domain.com" exists or not and therefore asks for a MX record for "domain.com" to the DNS you configured. The DNS in turn searches for an authoritative DNS for "domain.com" and then sends it a query for the MX records of "domain.com"; if it doesn't get an answer your appliance cannot validate the sender domain and rejects the connection with the error you reported.
In your example this means that the appliance didn't even know that the MX for cardig.com were "mail.cardig.com" and "mail1.cardig.com", but rather that the DNS server didn't get that information from the authoritative DNS server of "cardig.com".
Hope this helps.
Andrea

Unable to edit Default Domain policy on Server 2012 R2 domain controller

Hello,
I recently built a Server 2012 R2 domain controller and added it to my domain. When trying to edit the default domain policy I get the following error:
I can make edits to other GPO objects. All the other domain controllers are Server 2008 and are able to edit that GPO. The issue is on the Server 2012 box only. I've checked the delegated permissions, I'm a domain admin, and have opened
GPMC as administrator. Does anyone know what I'm missing? Thank you for your time.
Tino

Hi Tino,
>>Could that be the problem?
I don't think so, for we can still use FRS to replicate Sysvol. However, it is recommended that we use DFSR to replicate Sysvol if our domain
function level is Windows Server 2008 or above.
Besides, we can follow the suggestions from the following thread to check out which replication mechanism we are using.
DFS-R on 2008 R2 by default?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/8f2042d3-193d-4414-b9da-cbcedc6a4c32/dfsr-on-2008-r2-by-default?forum=winserverDS
If the Sysvol is replicated by FRS mechanism, as I suggested in the last reply, we can do a non-authoritative restore for the Sysvol on the new Windows
Server 2012. This will restore the Sysvol from a healthy DC.
To perform a nonauthoritative restore, stop the FRS service, configure the BurFlags registry key, and then restart the FRS service. To do so:
1. Click Start, and then click Run.
2. In the Open box, type cmd and then press ENTER.
3. In the Command box, type net stop ntfrs.
4. Click Start, and then click Run.
5. In the Open box, type regedit and then press ENTER.
6. Locate the following subkey in the registry:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Backup/Restore\Process at Startup
7. In the right pane, double-click BurFlags.
8. In the Edit DWORD Value dialog box, type D2 and then click OK.
9. Quit Registry Editor, and then switch to the Command box.
10. In the Command box, type net start ntfrs.
11. Quit the Command box.
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Hope it helps.
Best regards,
Frank Shen

Roadrunner/cwmx and Invalid sender address problems

I have spent hours trying to fix problem with Road Runner email when not connected to rr via wifi.
Background: rr doesn't allow smtp outgoing if you aren't connected to their cable. Thus you have to be on wifi from your cable router. So, many folks turn on ATT cwmx.com smtp server to send mail when on 3G or Edge. iPhone email is supposed to try next smtp server if first one fails. But when sending mail many folks are getting "Invalid sender address" error message.
I had thought the error message was coming from cwmx but now think that it is coming from road runner's smtp server and the iPhone is not going on to the next smtp server, i.e. cwmx.com.
Maybe this is the problem/bug. I know there are some other bugs in iPhone mail app. For example I have 4 smtp servers showing in "Other SMTP servers" all with the same address and there is no way to delete the duplicates.

It is usually the ISP being used for the internet connection with the SMTP server restriction.
Most, if not all ISPs block the use of SMTP servers that are outside of their network (or that isn't provided by the ISP) unless the SMTP server is authenticated.
Most ISPs don't provide/support an authenticated SMTP server, and Time Warner is one of them. If TW provided/supported an authenticated SMTP server for RoadRunner accounts, using RR's SMTP server wouldn't be an issue regardless the internet connection.
I access my MobileMe account and a business POP account with the iPhone's Mail client. Both accounts have an authenticated SMTP server and I've never had a problem sending with either account regardless my internet connection - via numerous wi-fi connections with different ISPs or via EDGE with my first generation iPhone, or via 3G or EDGE with my iPhone 3G.
These restrictions are in place as a part of an overall effort to prevent spam emanating from the ISP's domain.

10.6 Email-Server/Postfix Helo command rejected - local SMTP clients won't use FQDN

Hi,
I set up a 10.6 server as mail-server which works (more or less) fine. I can send and receive internal and external Emails from various Macs with mail.app and Windows-Boxes with Thunderbird. However, some clients will be rejected due to wrong Helo strings
e.g. a Windows-Box using Outlook express
server postfix/smtpd[73194]: NOQUEUE: reject: RCPT from winbox.intranet.example.com[192.168.2.21]: 504 5.5.2 <winbox>: Helo command rejected: need fully-qualified hostname; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<winbox>
similar happens with my router sending status-Emails (replace "winbox" with "router")
finally my stand-alone-fax-machine uses it's ip-address as helo-string (helo=<192.168.2.10>, similar error)
For now I've commented out
smtpd_helo_restrictions = reject_invalid_helo_hostname
#reject_non_fqdn_helo_hostname
which makes things work. But that's not the right way, I guess, moreover since this entry is "fixed" by Server-Admin ever now and then.
Does this problem arise from misconfigured boxes or a misconfigured OSX-Server? Hope the latter since there're no options to change this in my router nor my fax-machine...
Thanks

Try this.
Symptoms Users who use Microsoft Outlook as their email client and whoconnect to an email server running on Mac OS X Server v10.6 may not beable to send mail. The following (or similar) alert is returned toOutlook clients: The message could not be sent becauseone of the recipients was rejected by the server. The rejected emailaddress was "[email protected]" is subject "example", account:"mail.example.com" , server "mail.example.com", protocol: SMTP, serverresponse: "504 5.5.2 < hostname > : Helo command rejected: needfully qualified host name", port: 25, secure (SSL): no, server error:504, error number: 0x800CCC79. Products Affected Mac OS X Server 10.6 Resolution In Mac OS X Server v10.6, Postfix is configuredto require a fully qualified hostname from SMTP clients. This settingis configurable and the restriction can be removed, however anymodification of a security-related setting should be evaluated prior tomaking the change. Once you have evaluated the change, you can use the following steps to implement it: Note: Before proceeding, back up the /etc/postfix/main.cf file as a precaution.
In /etc/postfix/main.cf, locate the smtpd_helo_restrictions setting
Remove "reject_non_fqdn_helo_hostname" from the list of settings.
Restart the Mail service.

Is anyone using the Calendar Server to send external invites?

Is anyone using the Calendar Server to send external invites?
We have a Mountain Lion server running DNS, Open Directory, File Sharing and VPN. We have recently stood up the Calendar server and it is working very well. Internal invites work fine and are instantaneous to computer, iPhone, iPad. We have the ports working so that calendar items created outside the network work fine as well. Only problem is we cannot invite anyone with an external e-mail address. Each time we do the Calendar Error Log populates with:
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 5
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 4
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 3
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 2
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] SMTP Client retrying server. Retry: 1
2013-04-15 13:11:03-0500 [-] [mailgateway] 2013-04-15 13:11:03-0500 [Uninitialized] [twistedcaldav.mail.MailHandler#error] Mail gateway failed to send message <[email protected]> from [email protected] to mailto:[email protected] (Reason: Failure with multiple causes.)
We have set up an internal e-mail address. I have confined that it works fine. I have tried more than one internal account. I have also verified the settings through the command line by typing "sudo serveradmin settings calendar" The iMIP sending and receiving information is correct. There is no authentication type setting listed in the command line output even though there's a place to choose it in the Enable invitations by email - Edit button on the third screen. No matter what I choose it goes back to "login" and still doesn't work.
The command line settings mention a port number 62310 as being the MailGatewayPort but opening that port on the network's firewall makes no difference. As I said external set up works fine from Mac/iPhone/iPad and push notification works fine as well.
Is anyone using this functionality?

I'm sorry. I forgot to add Mail to the list of services. I AM using mail on that server. Here's the iMIP portion of my settings output from Terminal.
calendar:Scheduling:iMIP:Sending:Server = "boardwalkserver.kuhnwitt.com"
calendar:Scheduling:iMIP:Sending:UseSSL = yes
calendar:Scheduling:iMIP:Sending:Username = "calendarserver"
calendar:Scheduling:iMIP:Sending:Address = "[email protected]"
calendar:Scheduling:iMIP:Sending:Password = "password"
calendar:Scheduling:iMIP:Sending:Port = 465
calendar:Scheduling:iMIP:Enabled = yes
calendar:Scheduling:iMIP:MailGatewayPort = 62310
calendar:Scheduling:iMIP:Receiving:Server = "boardwalkserver.kuhnwitt.com"
calendar:Scheduling:iMIP:Receiving:UseSSL = yes
calendar:Scheduling:iMIP:Receiving:Username = "calendarserver"
calendar:Scheduling:iMIP:Receiving:PollingSeconds = 30
calendar:Scheduling:iMIP:Receiving:Type = "imap"
calendar:Scheduling:iMIP:Receiving:Password = "password"
calendar:Scheduling:iMIP:Receiving:Port = 993
calendar:Scheduling:iMIP:AddressPatterns:_array_index:0 = "mailto:.*"
calendar:Scheduling:iMIP:MailGatewayServer = "localhost"
So Add mail to the services being used. Since Calendar is running on the mail server one would assume that it could communicate with it fairly easily.

Error while Setting Up Oracle Content Server to Send Jobs to Oracle IBR

Hi,
I am trying to configure Oracle Content Server to send jobs to IBR.
I am using following version of UCM:
11gR1-11.1.1.3.0-idcprod1-100505T121221 (Build:7.3.0.180)
Both UCM and IBR are using same WAS domain. Installed on Windows server 2008.
1.I have started both manged servers for UCM and IBR.
2.Then by browsing IBR console http://vpunvfpctnsz-07:16250/ibr/ , i have changed the
Incoming Socket Connection Address Security Filter:
127.0.0.1|0:0:0:0:0:0:0:1|<<my.server.IP.address>>
3.Enabled DAMConverter component on IBR
4.Restarted IBR.
5.Created an outgoing provider on UCM content server as follows:
Provider Name: IBR
Provider Description: Provider for IBR
Provider Type: outgoing
Provider Class: intradoc.provider.SocketOutgoingProvider
Provider Connection: intradoc.provider.SocketOutgoingConnection
Instance Name: VPUNVFPCTN955099yscom16250 << same as IBR server name >>
Server Host Name: vpunvfpctnsz-07
HTTP Server Address:
Server Port: 16250
Relative Web Root: /ibr/
Conversion Options: Handles Inbound Refinery Conversion Jobs
Refinery read-only mode: False
Maximum Jobs to Queue: 1000
It is showing following status:
Connection State: This remains "good" when i click on test and after some time chages to "down".
Connection Error: Unable to communicate with refinery provider IBR; it does not resolve to a valid IBR. Exception type is 'java.lang.Throwable'.
Did i miss any step?
Please suggest.
Thanks and regards,
Minal

Hi
Server Port: 16250
This should be the value of IntradocServerPort for IBR server .
By default it is 5555 .
Replace 16250 with 5555 (if you have not changed it ) .
Save the changes , restart UCM managed server .
Test to see if the error shows up .
Hope it helps .
Thanks
Srinath

How to configure ML Server to send Alert Notifications by mail?

Is it possible to configure Mountain Lion Server to send out Alert notification by e-mail without enabling full Mail services?
I don't want to run the Mail service on the Server. I'm quite happy with my ISP's mail service. Besides, I have a dynamic public IP address, hence no rDNS entry (so I couldn't run Mail if I wanted to). And I don't have the expertise to configure and maintain the Mail service. But I would like to get the Server to send me any important alert notifications by e-mail.
I have access to an authenticated SMTP server I can use to relay the outbound alert notification emails. But I don't know how to coerce the alert service into using it. Is it possible to do so, or does one need the full-blown Mail service to be configured (with both dovecot and postfix running) in order to get Alerts to be e-mailed?
Thanks for any help.

@MrHoffman,
Thanks for the pointers and suggestions.
The config for my ISP's SMTP server is correct. I specified the port (:465), and double-checked userid/password. It's the same as used by all our e-mail clients (a half-dozen or so on various Macs, iPhones, iPads, Linux boxes), all of which work fine from my LAN.
As for DNS, it seems OK. (I am indebted to you for the excellent series of articles on servers and networking at http://labs.hoffmanlabs.com/node/1705 )
The changeip command reports:
The names match. There is nothing to change.
dirserv:success = "success"
However, I should point out that I do not have the DNS service enabled on ML Server. I already have a local DNS running on my gateway router. (it's an instance of the dnsmasq process that is part of Tomato firmware). It has local names defined for all the servers and hosts on my LAN, and provides rDNS for them as well.
However, what I haven't done is enabled the Mail service. You've (slightly) misunderstood the core of my plan. My intent is not simply to secure the local mail server against remote access. I don't want either remote or local users from accessing the mail server. I don't want it listening for POP or IMAP connections from anywhere (on my LAN or remotely). I don't want it receiving inbound mail from anywhere. I don't want it relaying outbound mail for any client on my LAN. All I want the ML Server to be able to do is to send me alerts (by e-mail) when it's in need of attention. Other appliances on my LAN (eg. a NetgearReadyNAS) can send me e-mails when they are unhappy, and I hope I can coerce the ML Server to do the same.
I know I don't have the expertise to operate and maintain my own mail server, and I'm quite happy with the mail service provided by my existing network service provider. Plus, I'm behind a cable modem with a dynamic IP address, so I'm unable to establish my own rDNS record (which I understand is required to handle inbound mail).
It looks like the next step is to turn on the Mail service. But I'm sure it's going to be unhappy since there's no MX record set-up. I was hoping there was a way that ML Server could simply send out its own outbound alerts (using my ISP's SMTP relay) without having the incoming part of the mail service active. But perhaps Apple didn't anticipate that sort of configuration.

"DataSocket Server has encountered a problem and needs to close" - why?

I am trying to use DataSocket to publish a Front Panel control. First I start the DataSocket Server and then run a corresponding VI. It goes well once or twice but in the end DataSocket Server crashes producing an error message and offering to send an error report to Microsoft:
"National Instruments DataSocket Server has encountered a problem and needs to close. We are sorry for the inconvenience".
I wonder if there is any remedy for this. Windows firewall does not seem to be the cause - the crash happens with the firewall disabled.
Alternatively - is there any way other than using DataSocket to dynamically access data from a running VI?
Regards,
Danielis

Hi Danielis
This kind of errors usally occurs when there is a file corruption. In either the application of the configuration files. The Datasocket configuration is save in the 'cwdssini.dss' file. this is by default installed in 'C:\Program Files\National Instruments\DataSocket'. Yu could try and remove this and then run the Datasocket Server Manager once to recreate a file with default settings.
We it is a problem with the Application you could try and install a fresh copy on a other machine and run the VI and server on that machine. Or just run the server on the other machine and connact you Front panel object to that server instead.
As for other ways of doing this you could look into the Shared Variables that have been introduced in LabVIEW 8
Hope this helps
Karsten

Can i set a node manager serve for 2 domain on one machin??

My question is simple.
I installed webcenter suite and soa suite in a machine using difference linux user and difference middleware home.
and I want to set a node manager server for two domains (soa_domain and webcenter_domain).
Is is possible?
When I tried to register domain list in node manager domain list using nmEnroll() of wlst, it failed.
please check following logs in 7101 is admin server port of soa domain and I ran node manager on webcenter domain.
Thanks in advance.
BmW.
~~~~~~~~~~~~~~~~~~
wls:/offline> connect()
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://localhost:7101
Connecting to t3://localhost:7101 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'soa_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> nmEnroll('/u02/app/soa11g/middleware/user_projects/domains/soa_domain', '/u02/app/wc11g/middleware/wlserver_10.3/common/nodemanager');
Enrolling this machine with the domain directory at /u02/app/soa11g/middleware/user_projects/domains/soa_domain ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1447, in nmEnroll
File "<iostream>", line 1848, in raiseWLSTException
WLSTException: Error occured while performing nmEnroll : Problem enrolling the machine. : /u02/app/soa11g/middleware/user_projects/domains/soa_domain/config/nodemanager/nm_password.properties (Permission denied)
Use dumpStack() to view the full stacktrace
wls:/soa_domain/serverConfig> exit();

you might be victim of the "node manager starts WL Server with same Unix user id that was used to start Node Manager itself" problem
see here http://forums.oracle.com/forums/thread.jspa?threadID=2184607&tstart=89
I have been looking everywhere for a simple way to tell Node Manager to use a different Unix UID,
anybody any clue?
here http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/overview.html the Node Manager doc page

Linked Server across the Domain

Hi
I have one problem encountering with Linked server connectivity.
Have one of the server in Domain A and another server into other Domain B. Am able to connect and execute the sql query from Domain A to B. (Creating a linked server in Domain A and trying to access the database which is in Domain B). The problem is that vice
versa am not able to achieve. Could you just help me in debugging this scenario?
Also if you could throw me some light how to verify the IP is not blocked in firewall settings will be helpful to debug further.
Some of the things which I have played around was to verify the remote connectivity was enabled, TCP/IP protocol was enabled, SQL service is up running etc
Regards
Srinivasan Baskaran
Srinivasan, Sr. Software Engineer, India

To verify firewall settings:
Please refer -
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx
Try one more trick given in below similar thread:
SQL2008r2 Linked Server fails across domains
Cheers,
Vaibhav Chaudhari
[MCTS],
[MCP]

10.5.8 server postfix sender domain problem

Similar Messages

Maybe you are looking for