10.5 Client refuses to authenticate Kerberos or obey managed preferences
I am sure this has come up time and again, but a search in the forums has not come back with a work around.
I am running Tiger Server 10.4.11 as an OD master serving up portable accounts in a mixed Tiger and Leopard Client Environment. I just did a Leopard upgrades on two MacBooks that were previously bound to the OD server when running Tiger.
Upon completing the upgrades I have found two things:
1) Local and network users working on the laptops are no longer being challenged for a kerberos ticket to authenticate to network shares served up by the 10.4 server
2) Managed preferences for users as well as the clients are no longer being obeyed by the Leopard upgraded clients.
Everything works as it should on my Tiger Clients connecting to the server.
I have flushed the kerberos plists and rebound the Leopard clients to no effect, except to see some managed preferences on the login screen that somehow were honored in the upgrade be rolled back to factory defaults.
I know that Apple has made a lot of changes in Leopard, but is there any known work around to get Leopard to pull kerberos tickets from the server and obey managed preferences? I am not yet ready to make the upgrade to Leopard server with a stable server environment already in place.
Seems to me there should be some sort of workaround.
Help!
TIA,
Art
Message was edited by: MacWay
Turns out it was a time synch issue. I discovered this without any help from the forums.
Similar Messages
-
L2TP / PPP & peer refused to authenticate
Hi
Having some trouble with a basic L2TP VPN setup in Xserve 10.6.1 (kerberos auth). From what I've read in the meantime, it seems to indicate that OSX Server is asking for client authentication, that isn't given by the device? (using iPhone 3.0.1 and OSX 10.6.1 client to test). Do I have to turn off client auth somehow? Any suggestions appreciated!
Using Kerberos with a shared secret (no certificate).
fullstatus from the vpn setup is below:
vpn:servicePortsAreRestricted = "NO"
vpn:readWriteSettingsVersion = 1
vpn:servers:com.apple.ppp.pptp:AuthenticationProtocol = "MSCHAP2"
vpn:servers:com.apple.ppp.pptp:CurrentConnections = 0
vpn:servers:com.apple.ppp.pptp:enabled = no
vpn:servers:com.apple.ppp.pptp:MPPEKeySize = "MPPEKeySize128"
vpn:servers:com.apple.ppp.pptp:Type = "PPP"
vpn:servers:com.apple.ppp.pptp:SubType = "PPTP"
vpn:servers:com.apple.ppp.pptp:AuthenticatorPlugins = "DSAuth"
vpn:servers:com.apple.ppp.l2tp:AuthenticationProtocol = "EAP"
vpn:servers:com.apple.ppp.l2tp:CurrentConnections = 0
vpn:servers:com.apple.ppp.l2tp:enabled = yes
vpn:servers:com.apple.ppp.l2tp:startedTime = "2009-10-07 12:41:51 +1000"
vpn:servers:com.apple.ppp.l2tp:Type = "PPP"
vpn:servers:com.apple.ppp.l2tp:SubType = "L2TP"
vpn:servers:com.apple.ppp.l2tp:AuthenticatorPlugins = "DSAuth"
vpn:servers:com.apple.ppp.l2tp:pid = 7459
vpn:servicePortsRestrictionInfo = emptyarray
vpn:health = emptydictionary
vpn:logPaths:com.apple.ppp.pptp_ServerLog = "/var/log/ppp/vpnd.log"
vpn:logPaths:com.apple.ppp.pptp_PPPLog = "/var/log/ppp/vpnd.log"
vpn:logPaths:vpnLog = "/var/log/ppp/vpnd.log"
vpn:configured = yes
vpn:state = "RUNNING"
vpn:setStateVersion = 1
Full server log output for a connection attempt below:
2009-10-07 12:59:55 EST Incoming call... Address given to client = 10.10.5.205
Wed Oct 7 12:59:55 2009 : Directory Services Authentication plugin initialized
Wed Oct 7 12:59:55 2009 : Directory Services Authorization plugin initialized
Wed Oct 7 12:59:55 2009 : L2TP incoming call in progress from '10.10.5.118'...
Wed Oct 7 12:59:55 2009 : L2TP received SCCRQ
Wed Oct 7 12:59:55 2009 : L2TP sent SCCRP
Wed Oct 7 12:59:55 2009 : L2TP received SCCCN
Wed Oct 7 12:59:55 2009 : L2TP received ICRQ
Wed Oct 7 12:59:55 2009 : L2TP sent ICRP
Wed Oct 7 12:59:55 2009 : L2TP received ICCN
Wed Oct 7 12:59:55 2009 : L2TP connection established.
Wed Oct 7 12:59:56 2009 : using link 0
Wed Oct 7 12:59:56 2009 : Using interface ppp0
Wed Oct 7 12:59:56 2009 : Connect: ppp0 <--> socket[34:18]
Wed Oct 7 12:59:56 2009 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth eap> <magic 0x1e583301> <pcomp> <accomp>]
Wed Oct 7 12:59:56 2009 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x2d2bf884> <pcomp> <accomp>]
Wed Oct 7 12:59:56 2009 : lcp_reqci: returning CONFACK.
Wed Oct 7 12:59:56 2009 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x2d2bf884> <pcomp> <accomp>]
Wed Oct 7 12:59:56 2009 : rcvd [LCP ConfNak id=0x1 <auth chap MS-v2>]
Wed Oct 7 12:59:56 2009 : sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x1e583301> <pcomp> <accomp>]
Wed Oct 7 12:59:56 2009 : rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x1e583301> <pcomp> <accomp>]
Wed Oct 7 12:59:56 2009 : sent [LCP EchoReq id=0x0 magic=0x1e583301]
Wed Oct 7 12:59:56 2009 : peer refused to authenticate: terminating link
Wed Oct 7 12:59:56 2009 : sent [LCP TermReq id=0x3 "peer refused to authenticate"]
Wed Oct 7 12:59:56 2009 : Connection terminated.
Wed Oct 7 12:59:56 2009 : L2TP disconnecting...
Wed Oct 7 12:59:56 2009 : L2TP sent CDN
Wed Oct 7 12:59:56 2009 : L2TP sent StopCCN
Wed Oct 7 12:59:56 2009 : L2TP disconnected
2009-10-07 12:59:56 EST --> Client with address = 10.10.5.205 has hungup
Message was edited by: skermajoMy first suggestion is to switch from Kerberos to MS-CHAPv2 and try again.
Personally, I have not been able to get Kerberos authentication to work reliably, and in fact, right now I seem to not be able to set it any longer (thanks, now I have something to fix )
Let us know if that 'fixed' it or post the log once that is done and we will continue along.
Peter -
Kinit: Client not found in Kerberos database while getting initial credentials
Hi all,
I am trying to configure application which uses Kerberos authentication.
Error message:
kinit: Client not found in Kerberos database while getting initial credentials
I use Windows Server 2003 domain controller as LDAP server, Tomcat application (on Linux) and IIS application as client, and apache load balancer.
There is multidomain environment: russia.domain.net, europa.domain.net, asia.domain.net;
Tomcat and IIS servers works behind a proxy server (Apache on Linux).
For applications created two DNS records type A. all DNS use IP address of Apache proxy server:
application-sandbox.russia.domain.net
applicationweb-sandbox.russia.domain.net
To confiure kerberos authentication i have performed the following steps:
1. Create user account in EUROPA domain and configure delegation for this:
EUROPE\application_sandbox
2. Register SPN for this account:
setspn -A HTTP/application-sandbox.russia.domain.net EUROPE\application_sandbox
setspn -A HTTP/application-sandbox EUROPE\application_sandbox
3. After i verified registered SPN for this account:
setspn.exe -L EUROPE\application_sandbox
Registered ServicePrincipalNames for CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net:
HTTP/application-sandbox
HTTP/application-sandbox.russia.domain.net
3. After i generate a keytab file:
ktpass /princ HTTP/application-sandbox.russia.domain.net:@RUSSIA.DOMAIN.NET /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass Pa$$w0rd
4. Properties of account looks like the following:
Get-ADUser -Identity appication_sandbox -Properties CN, ServicePrincipalNames, UserPrincipalName
CN : kxxb999
DistinguishedName : CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net
Enabled : True
GivenName :
Name : kxxb999
ObjectClass : user
SamAccountName : application_sandbox
ServicePrincipalNames : {HTTP/application-sandbox, HTTP/application-sandbox.russia.domain.net}
Surname : application_sandbox
UserPrincipalName : HTTP/[email protected]
4.Note that CN and User logon name are different. SPN registered for DNS record.
There are no computer in domain with name application-sandbox.russia.domain.net. this is a DNS record for application.
5. Then i copy keytab file to Linux machine, configure krb5.conf file and trying to get TGT for registered principal name.
krb5.conf file:
[libdefaults]
default_realm = EUROPE.DOMAIN.NET
dns_lookup_realm = false
dns_lookup_kdc = false
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[realms]
RUSSIA.DOMAIN.NET = {
kdc = dc01.russia.domain.net
admin_server = dc01.russia.domain.net
default_domain = russia.domain.net
EUROPE.DOMAIN.NET = {
kdc = dc01.europe.domain.net
admin_server = dc01.europe.domain.net
default_domain = europe.domain.net
[domain_realm]
europe.domain.net = EUROPE.DOMAIN.NET
.europe.domain.net = EUROPE.DOMAIN.NET
russia.domain.net = RUSSIA.DOMAIN.NET
.russia.domain.net = RUSSIA.DOMAIN.NET
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
Then i verified created keytab file:
klist -e -k -t application_sandbox.keytab
Keytab name: FILE:application_sandbox.keytab
KVNO Timestamp Principal
0 01/01/70 01:00:00 HTTP/[email protected] (arcfour-hmac)
And trying to get TGT ticket:
kinit -V -k -t application_sandbox.keytab HTTP/[email protected]
Using default cache: /tmp/krb5cc_0
Using principal: HTTP/[email protected]
Using keytab: application_sandbox.keytab
kinit: Client not found in Kerberos database while getting initial credentials
But if i use SamAccountName name with kinit commant then i can aquire TGT ticket:
[root@localhost security]# kinit application_sandbox
Password for [email protected]:
[root@localhost security]# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: [email protected]
Valid starting Expires Service principal
06/30/14 16:37:41 07/01/14 02:37:38 krbtgt/[email protected]
renew until 07/01/14 16:37:41
I'm in trouble. can anyone faced this problem?
Thank youHi all,
according to Amy answer I thought, how user principal could not be found in Kerberos database, e.g AD domain.
My HTTP service works in RUSSIA domain, but user principal created in EUROPE domain.
Next, i have checked my ktpass command:
ktpass /princ HTTP/[email protected] /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass
Pa$$w0rd
especially the following parameters:
/princ HTTP/[email protected]
/mapuser EUROPE\application_sandbox
When generating keytab it changes userlogon name to HTTP/application-sandbox.russia.domain.net and set domain domain to RUSSIA.DOMAIN.NET
But no user principal with name application_sandbox in RUSSIA.DOMAIN.NET domain (e.g. Kerberos realm)
So solution is change RUSSIA.DOMAIN.NET to EUROPE.DOMAIN.NAME in ktpass command.
After that i am able to get TGT and authenticate in domain. -
SSO : krb_error 6 Client not found in Kerberos Database
Hi All,
We are trying to configure SSO for Win AD user to login to infoView
OS - Windows 2003 SP2
Machine - 64 Bit
BOE - XI 3.1 + SP2 + FP2.4 (32 Bit)
CMS Database - SQL 2005 Server
Domain Controller - Not sure if is 2003 or 2008 (awaiting information from client)
While executing the kinit
kinit BOSSO/<service accont name with FQDN> <password>
its throwing a "krb_error 6 Client not found in kerberos Database."
However Manual AD is working fine.
What could be the issue here.
Thanks and Regards
Ranjit Krishnan
Edited by: Ranjit Krishnan on Mar 24, 2010 2:56 PMclient not found in kerberos DB means the KDC was located but the username was not found. There are many reasons for this
1) typo in the username or when ktpass was run
2) duplicate UPN (caused by running ktpass on 2 or more accounts)
3) ktpass was not run on the account or not successfully so the username was never changed
4) there is a bug in AD with 2008 DC's when the UPN does not = the samaccountname which will throw this message (search SAP KB's for 2008 client not found in kerberos database and you'll find the link to the Microsoft article to patch it)
Regards,
Tim -
Client not found in Kerberos database
Hi All,
I am getting Client not found in Kerberos database* when i try to a create new connection from SQL Developer 2.1.1.64 to Oracle 10G database.
I am sure that login credentials provided in connection properties are correct. pls respond, if you know the solution.
Regards,
Manoj N.Your "being sure" is overwhelmed by the evidence. The chance that you are correct and database/Kerberos is incorrect is a very small number approaching zero.
So back to basics ...
1. What is your actual database version (it is not 10g)?
2. What version of Kerberos?
3. What platform and operating system?
4. Does it work for anyone else?
5. Did it ever work before and stopped working or is this a first attempt by anyone to log on?
6. Have you turned on connection logging? If not do so. If you have post the relevant section of the log file.
7. Do you have a DBA or system or network administrator on-site?
8. Please also post the full and complete error message not your interpretation of it.
We can not help you without a thorough understanding of what is actually happening which you have not provided. -
Wireless Clients failing to authenticate via the RADIUS
Hi friends
I am trying to use Radius server (NPS) to authenticate my wireless users using 1941W router.
For some reason it cannot authenticate successfully. I checked the radius server is reachable but still I dont see any luck.
the config is like this:
***************Config snap shot*********************
aaa new-model
aaa group server radius group1
server 10.32.0.154 auth-port 1812 acct-port 1813
aaa authentication login EAP group group1
aaa session-id common
dot11 syslog
dot11 ssid CORP
vlan 320
authentication open eap EAP
mbssid guest-mode
interface Loopback1
ip address 10.51.240.1 255.255.255.255
no ip route-cache
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 320 mode ciphers aes-ccm
ssid CORP
antenna gain 0
mbssid
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 320 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 320 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.51.246.2 255.255.255.0
no ip route-cache
ip default-gateway 10.51.246.1
ip radius source-interface Loopback1
radius-server host 10.32.0.154 auth-port 1812 acct-port 1646 key V3rv3@mc0m
bridge 1 route ip
*********************End of config snap shot*********************
When i run the debug i see the following messages which I am still trying to understand thought it would be worthwhile mentioning here:
*******************Debug**********************
AP1#
*Mar 1 01:04:41.951: AAA/BIND(0000001E): Bind i/f
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: Create new client 2477.037e.22d4 for application 0x1
*Mar 1 01:04:41.951: dot11_auth_initialize_client: 2477.037e.22d4 is added to the client list for application 0x1
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: req->auth_type 0
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: auth_methods_inprocess: 2
*Mar 1 01:04:41.951: dot11_auth_add_client_entry: eap list name: EAP
*Mar 1 01:04:41.951: dot11_run_auth_methods: Start auth method EAP or LEAP
*Mar 1 01:04:41.951: dot11_auth_dot1x_start: in the dot11_auth_dot1x_start
*Mar 1 01:04:41.951: dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 2477.037e.22d4
*Mar 1 01:04:41.951: EAPOL pak dump tx
*Mar 1 01:04:41.951: EAPOL Version: 0x1 type: 0x0 length: 0x002F
*Mar 1 01:04:41.951: EAP code: 0x1 id: 0x1 length: 0x002F type: 0x1
030017B0: 0100002F 0101002F 01006E65 74776F72 .../.../..networ
030017C0: 6B69643D 56434F52 502C6E61 7369643D kid=VCORP,nasid=
030017D0: 4B414C2D 30322D41 50312C70 6F727469 KAL-02-AP1,porti
030017E0: 643D30 d=0
*Mar 1 01:04:41.955: dot11_auth_send_msg: sending data to requestor status 1
*Mar 1 01:04:41.955: dot11_auth_send_msg: Sending EAPOL to requestor
*Mar 1 01:04:41.955: dot11_auth_dot1x_send_id_req_to_client: Client 2477.037e.22d4 timer started for 30 seconds
*Mar 1 01:04:41.955: dot11_auth_parse_client_pak: Received EAPOL packet from 2477.037e.22d4
*Mar 1 01:04:41.955: EAPOL pak dump rx
*Mar 1 01:04:41.955: EAPOL Version: 0x1 type: 0x1 length: 0x0000
033E86E0: 01010000 ....
*Mar 1 01:04:41.955: dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,EAP_START) for 2477.037e.22d4
*Mar 1 01:04:41.955: dot11_auth_dot1x_send_id_req_to_client: Sending identity request to 2477.037e.22d4
*Mar 1 01:04:41.959: EAPOL pak dump tx
*Mar 1 01:04:41.959: EAPOL Version: 0x1 type: 0x0 length: 0x002F
*Mar 1 01:04:41.959: EAP code: 0x1 id: 0x2 length: 0x002F type: 0x1
03001A20: 0100002F 0102002F 01006E65 74776F72 .../.../..networ
03001A30: 6B69643D 56434F52 502C6E61 7369643D kid=VCORP,nasid=
03001A40: 4B414C2D 30322D41 50312C70 6F727469 KAL-02-AP1,porti
03001A50: 643D30 d=0
*Mar 1 01:04:41.959: dot11_auth_send_msg: sending data to requestor status 1
*Mar 1 01:04:41.959: dot11_auth_send_msg: Sending EAPOL to requestor
*Mar 1 01:04:41.959: dot11_auth_dot1x_send_id_req_to_client: Client 2477.037e.22d4 timer started for 30 seconds
*Mar 1 01:04:41.963: dot11_auth_parse_client_pak: Received EAPOL packet from 2477.037e.22d4
*Mar 1 01:04:41.963: EAPOL pak dump rx
*Mar 1 01:04:41.963: EAPOL Version: 0x1 type: 0x0 length: 0x0012
*Mar 1 01:04:41.963: EAP code: 0x2 id: 0x1 length: 0x0012 type: 0x1
033603C0: 01000012 ....
033603D0: 02010012 01564552 56455C47 30373532 .....VERVE\G0752
033603E0: 3736 76
*Mar 1 01:04:41.963: dot11_auth_parse_client_pak: id is not matching req-id:1resp-id:2, waiting for response
*Mar 1 01:04:41.963: dot11_auth_parse_client_pak: Received EAPOL packet from 2477.037e.22d4
*Mar 1 01:04:41.963: EAPOL pak dump rx
*Mar 1 01:04:41.963: EAPOL Version: 0x1 type: 0x0 length: 0x0012
*Mar 1 01:04:41.963: EAP code: 0x2 id: 0x2 length: 0x0012 type: 0x1
033AEE90: 01000012 02020012 ........
033AEEA0: 01564552 56455C47 30373532 3736 .VERVE\G075276
*Mar 1 01:04:41.963: dot11_auth_dot1x_run_rfsm: Executing Action(CLIENT_WAIT,CLIENT_REPLY) for 2477.037e.22d4
*Mar 1 01:04:41.963: dot11_auth_dot1x_send_response_to_server: Sending client 2477.037e.22d4 data to server
*Mar 1 01:04:41.963: AAA/AUTHEN/PPP (0000001E): Pick method list 'EAP'
*Mar 1 01:04:41.963: dot11_auth_dot1x_send_response_to_server: Started timer server_timeout 60 seconds
*Mar 1 01:04:41.963: %AAA-3-BADSERVERTYPEERROR: Cannot process authentication server type *invalid_group_handle*
*Mar 1 01:04:41.963: dot11_auth_dot1x_parse_aaa_resp: Received server response: FAIL
*Mar 1 01:04:41.963: dot11_auth_dot1x_parse_aaa_resp: found eap pak in server response
*Mar 1 01:04:41.963: Client 2477.037e.22d4 failed: EAP reason 2
*Mar 1 01:04:41.963: dot11_auth_dot1x_parse_aaa_resp: Failed client 2477.037e.22d4 with aaa_req_status_detail 2
*Mar 1 01:04:41.963: dot11_auth_dot1x_run_rfsm: Executing Action(SERVER_WAIT,SERVER_FAIL) for 2477.037e.22d4
*Mar 1 01:04:41.963: dot11_auth_dot1x_send_response_to_client: Forwarding server message to client 2477.037e.22d4
*Mar 1 01:04:41.963: EAPOL pak dump tx
*Mar 1 01:04:41.963: EAPOL Version: 0x1 type: 0x0 length: 0x0004
*Mar 1 01:04:41.963: EAP code: 0x4 id: 0x2 length: 0x0004
03001DC0: 01000004 04020004 ........
03001DD0:
*Mar 1 01:04:41.963: dot11_auth_send_msg: sending data to requestor status 1
*Mar 1 01:04:41.967: dot11_auth_send_msg: Sending EAPOL to requestor
*Mar 1 01:04:41.967: dot11_auth_dot1x_send_response_to_client: Started timer client_timeout 30 seconds
*Mar 1 01:04:41.967: dot11_auth_dot1x_send_client_fail: Authentication failed for 2477.037e.22d4
*Mar 1 01:04:41.967: dot11_auth_send_msg: sending data to requestor status 0
*Mar 1 01:04:41.967: dot11_auth_send_msg: client FAILED to authenticate 2477.037e.22d4, node_type 64 for application 0x1
*Mar 1 01:04:41.967: dot11_auth_delete_client_entry: 2477.037e.22d4 is deleted for application 0x1
*Mar 1 01:04:41.967: %DOT11-7-AUTH_FAILED: Station 2477.037e.22d4 Authentication failed
*Mar 1 01:04:41.967: dot11_auth_client_abort: Received abort request for client 2477.037e.22d4
*Mar 1 01:04:41.967: dot11_auth_client_abort: No client entry to abort: 2477.037e.22d4 for application 0x1
Any Idea where the problem could be?
Regards,
MohitJust to add here, i ran another command on the AP/Router which indicates to me that there was no response from the Radius server.
KAL-02-AP1#sh radius statistics
Auth. Acct. Both
Maximum inQ length: NA NA 1
Maximum waitQ length: NA NA 2
Maximum doneQ length: NA NA 1
Total responses seen: 0 0 0
Packets with responses: 0 0 0
Packets without responses: 12 0 12
Access Rejects : 0
Average response delay(ms): 0 0 0
Maximum response delay(ms): 0 0 0
Number of Radius timeouts: 48 0 48
Duplicate ID detects: 0 0 0
Buffer Allocation Failures: 0 0 0
Maximum Buffer Size (bytes): 186 0 186
Source Port Range: (2 ports only)
1645 - 1646
Last used Source Port/Identifier:
1645/12
1646/0
Elapsed time since counters last cleared: 1h52m -
Android Beta client refuses to launch RemoteApp via URI scheme
Android Beta (8.1.7) client refuses to accept following URI: "rdp://full%20address=s:fqdn&remoteapplicationmode=i:1&remoteapplicationprogram=s:%7C%7Ccalc" with the error message "The RDP file is not valid. Notify your network administrator."
But it can launch RemoteApp via equivalent RDP file:
full address:s:fqdn
remoteapplicationmode:i:1
remoteapplicationprogram:s:||calcHi,
For URI scheme, please try to use “:” instead of “=” (equal sign) and recheck result.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Publish client print queues as managed preferences?
Hello,
I followed the documentation from Papercut NG on Mac printing, section Publishing the printer via Workgroup Manager to get the defined print queues for my client machines published as managed preferences.
I set up the print queues on the server. On the client, I configured the server print queues using the local Administrator account and printed successfully a few test pages. I then logged in with an Open Directory account with admin privileges. I then open Workgroup Manager, select a Computer Group, click Preferences, select Printing. I enable Manage Always, but the list of Available Printers remains empty, contrary to what the screenshot tells me from the referred article.
Environment:
+ Snow Leopard Server 10.6.1 on a MacMini.
+ Snow Leopard 10.6.1 on a MacPro.
Am I missing something?
RingoHello,
I followed the documentation from Papercut NG on Mac printing, section Publishing the printer via Workgroup Manager to get the defined print queues for my client machines published as managed preferences.
I set up the print queues on the server. On the client, I configured the server print queues using the local Administrator account and printed successfully a few test pages. I then logged in with an Open Directory account with admin privileges. I then open Workgroup Manager, select a Computer Group, click Preferences, select Printing. I enable Manage Always, but the list of Available Printers remains empty, contrary to what the screenshot tells me from the referred article.
Environment:
+ Snow Leopard Server 10.6.1 on a MacMini.
+ Snow Leopard 10.6.1 on a MacPro.
Am I missing something?
Ringo -
How to generate client for GetFile service of Webcenter Content Management.
How to generate client for GetFile service of Webcenter Content Management.
Downloaded file : GetFile.wsdl
<?xml version="1.0" encoding="utf-8" ?>
- <definitions xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.stellent.com/GetFile/" targetNamespace="http://www.stellent.com/GetFile/" xmlns="http://schemas.xmlsoap.org/wsdl/">
- <types>
- <s:schema elementFormDefault="qualified" targetNamespace="http://www.stellent.com/GetFile/">
- <s:element name="GetFileByID">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByIDResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByIDResult" type="s0:GetFileByIDResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByIDResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:element name="GetFileByName">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="revisionSelectionMethod" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="rendition" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="extraProps" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetFileByNameResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetFileByNameResult" type="s0:GetFileByNameResult" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="GetFileByNameResult">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="FileInfo" type="s0:FileInfo" />
<s:element minOccurs="0" maxOccurs="1" name="downloadFile" type="s0:IdcFile" />
<s:element minOccurs="0" maxOccurs="1" name="StatusInfo" type="s0:StatusInfo" />
</s:sequence>
</s:complexType>
- <s:complexType name="FileInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="dDocName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocTitle" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAuthor" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dSecurityGroup" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocAccount" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevClassID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevisionID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dRevLabel" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIsCheckedOut" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dCheckoutUser" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dCreateDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dInDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOutDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dStatus" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFlag1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dWebExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dProcessingState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dMessage" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dReleaseDate" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition1" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dRendition2" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dIndexerState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishType" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dPublishState" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dDocID" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="dIsPrimary" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dIsWebFormat" type="s:boolean" />
<s:element minOccurs="0" maxOccurs="1" name="dLocation" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dOriginalName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFormat" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dExtension" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="dFileSize" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="CustomDocMetaData" type="s0:IdcPropertyList" />
</s:sequence>
</s:complexType>
- <s:complexType name="StatusInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="statusCode" type="s:int" />
<s:element minOccurs="0" maxOccurs="1" name="statusMessage" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcPropertyList">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="property" type="s0:IdcProperty" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcProperty">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="name" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="value" type="s:string" />
</s:sequence>
</s:complexType>
- <s:complexType name="IdcFile">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="fileName" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="fileContent" type="s:base64Binary" />
</s:sequence>
</s:complexType>
</s:schema>
</types>
- <message name="GetFileByIDSoapIn">
<part name="parameters" element="s0:GetFileByID" />
</message>
- <message name="GetFileByIDSoapOut">
<part name="parameters" element="s0:GetFileByIDResponse" />
</message>
- <message name="GetFileByNameSoapIn">
<part name="parameters" element="s0:GetFileByName" />
</message>
- <message name="GetFileByNameSoapOut">
<part name="parameters" element="s0:GetFileByNameResponse" />
</message>
- <portType name="GetFileSoap">
- <operation name="GetFileByID">
<input message="s0:GetFileByIDSoapIn" />
<output message="s0:GetFileByIDSoapOut" />
</operation>
- <operation name="GetFileByName">
<input message="s0:GetFileByNameSoapIn" />
<output message="s0:GetFileByNameSoapOut" />
</operation>
</portType>
- <binding name="GetFileSoap" type="s0:GetFileSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
- <operation name="GetFileByID">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
- <operation name="GetFileByName">
<soap:operation soapAction="http://www.stellent.com/GetFile/" style="document" />
- <input>
<soap:body use="literal" />
</input>
- <output>
<soap:body use="literal" />
</output>
</operation>
</binding>
- <service name="GetFile">
- <port name="GetFileSoap" binding="s0:GetFileSoap">
<soap:address location="http://localhost:7101/_dav/cs/idcplg" />
</port>
</service>
</definitions>Hi,
I would suggest you to check the time recording functionality, see
details in:
http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/en/d5/299631364d4e959
c6609ca3bc24740/content.htm
Another possibility is configuring the Service Level Agreement, see
details in SDN blog:
Service Desk: SLA configuration hints
https://weblogs.sdn.sap.com/pub/wlg/24813
or
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/24813
Thanks
Regards,
Vikram -
Client Replaced - Managed Preferences no longer working
An iMac on my network came down with a hardware problem, so I replaced it with a different unit. I removed the computer from Workgroup Manager, gave the second one the same name and re-bound it to OD. Workgroup Manager can see the system in the Computer List, and I can add it to the Computer Groups I need, but the managed preferences of the group don't push out to the new system. I've since tried renaming it, but the problem remains.
The groups are working with all the other Macs that belong to them and the new unit is bound in the exact same way - is there some residual of the old machine that OSX server isn't liking? I've been pulling my hair out over this one.Hi
If you've had the logic board replaced the new board will have a different MAC address - obviously. Managing hardware using Computer Lists is actually done using the MAC addressess (ethernet hardware address). Its not enough to name it the same. You have to remove it completely from the Computer List and browse for it again. Better still make a note of the new MAC address and manually add it.
You can find the MAC addresses (as well as the IP addresses) of any networked mac/pc/printer etc by issuing:
ping 192.168.x.255
Or whatever IP address range you are using. Let it run for a few seconds. Use Control C to stop the ping and issue:
arp -a
This should list all IP addresses and associated MAC addresses. If you keep a list of which client computer name is associated with which IP address and MAC address then you should have a clearer picture of your network topology. This is better achieved if the Server is also the DHCP Server.
Tony -
Some Wireless clients won't authenticate to 887VA-W
Hi folks
I've swapped over a few months ago from an 877w router to an 887VAw which has a separate AP in-built, and there are a few wireless clients that had no problem authenticating to the 877w but just refuse to communicate to the 887VA-W.
The clients in question are set top box type devices : (1)Now TV and (2) Sky Wireless Adapter.
They have no problem seeing the SSID's being broadcast, and for troubleshooting I've setup an open test SSID without any encryption, but the clients still won't authenticate and grab an ip address, or more accurately they just don't get a dhcp ip address so I don't think authentication is really the issue. I don't know why these clients aren't happy with dhcp on the guest vlan (vlan2) where other clients get an ip address and work fine. Perhaps the fact I'm using vlan1 (being used for the Eap-Fast home wlan) as the native untagged vlan might have something to do with it? If I use a static ip address on the guest vlan (vlan 2 / ip 10.1.1.n ) then the Sky Wireless Adapter can send and receive packets across the wlan.
Can anybody please suggest some debugs or config changes to try and nail the problem? The relevant configs from the AP is pasted below, and the router below that.
Brgds, Tim
aaa new-model
aaa group server radius rad_eap
server name rs-local
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication ppp default local
aaa authorization exec default local
dot11 ssid home
vlan 1
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa version 2
dot11 ssid guest
vlan 2
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 abcdef123
dot11 ssid test
vlan 3
authentication open
mbssid guest-mode
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 2 mode ciphers aes-ccm
broadcast-key vlan 1 change 30
broadcast-key vlan 2 change 43200
ssid home
ssid guest
ssid test
antenna gain 0
mbssid
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
packet retries 64 drop-packet
no preamble-short
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.2
encapsulation dot1Q 2
no ip route-cache
no cdp enable
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
interface Dot11Radio0.3
encapsulation dot1Q 3
no ip route-cache
no cdp enable
bridge-group 3
bridge-group 3 subscriber-loop-control
bridge-group 3 spanning-disabled
bridge-group 3 block-unknown-source
no bridge-group 3 source-learning
no bridge-group 3 unicast-flooding
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.2
encapsulation dot1Q 2
no ip route-cache
bridge-group 2
bridge-group 2 spanning-disabled
no bridge-group 2 source-learning
interface GigabitEthernet0.3
encapsulation dot1Q 3
no ip route-cache
bridge-group 3
bridge-group 3 spanning-disabled
no bridge-group 3 source-learning
interface BVI1
ip address 172.27.44.2 255.255.255.0
no ip route-cache
ip default-gateway 172.27.44.1
****Router Config****
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered BVI1Hi Sebastian
Please see ip dhcp debug from 887VA-W showing the Sky client requesting an ip address but failing to get one. Also a debug from an 877-W showing successful dhcp assignment. Also the dhcp config as requested.The successful trace shows 2 mac addresses from the Sky wireless adapter/ Sky box each getting a dhcp address. I don't know whether the failure is a bug in the 887 dhcp code or some config in the embedded AP that needs tweaking.
Bregs, Tim
The Sky wired adapter (I think it's the mac of the sky box lan port) mac is 00:19:FB:A4:B2:1A
The Sky wireless mac is 18:28:61:99:7B:A8
887VA-W Debug - Failure:
887#term mon
887#sh deb
DHCP server packet debugging is on.
887#
887#
000141: Dec 16 07:03:02.082 London: DHCPD: ARP entry exists (10.1.1.10, e0c9.7ad6.24ee).
000142: Dec 16 07:03:02.082 London: DHCPD: unicasting BOOTREPLY to client e0c9.7ad6.24ee (10.1.1.10).
Denham_887#
000143: Dec 16 07:05:25.536 London: DHCPD: client's VPN is .
000144: Dec 16 07:05:25.536 London: DHCPD: No option 125
000145: Dec 16 07:05:25.536 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000146: Dec 16 07:05:25.536 London: DHCPD: Allocate an address without class information (10.1.1.0)
000147: Dec 16 07:05:25.536 London: DHCPD: Saving workspace (ID=0x4000009)
Denham_887#
000148: Dec 16 07:05:27.536 London: DHCPD: Reprocessing saved workspace (ID=0x4000009)
000149: Dec 16 07:05:27.536 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000150: Dec 16 07:05:27.536 London: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.12).DHCPD: Setting only requested parameters
000151: Dec 16 07:05:27.536 London: DHCPD: no option 125
000152: Dec 16 07:05:27.536 London: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
Denham_887#
000153: Dec 16 07:05:32.468 London: DHCPD: New packet workspace 0x123EC554 (ID=0xC700000A)
000154: Dec 16 07:05:32.468 London: DHCPD: client's VPN is .
000155: Dec 16 07:05:32.468 London: DHCPD: No option 125
000156: Dec 16 07:05:32.468 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000157: Dec 16 07:05:32.468 London: DHCPD: Allocate an address without class information (10.1.1.0)
000158: Dec 16 07:05:32.472 London: DHCPD: Saving workspace (ID=0xC700000A)
Denham_887#
000159: Dec 16 07:05:34.080 London: DHCPD: New packet workspace 0x1240A47C (ID=0x5500000B)
000160: Dec 16 07:05:34.080 London: DHCPD: client's VPN is .
000161: Dec 16 07:05:34.080 London: DHCPD: No option 125
000162: Dec 16 07:05:34.080 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000163: Dec 16 07:05:34.080 London: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.12).DHCPD: Setting only requested parameters
000164: Dec 16 07:05:34.080 London: DHCPD: no option 125
000165: Dec 16 07:05:34.080 London: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
Denham_887#
000166: Dec 16 07:05:34.468 London: DHCPD: Reprocessing saved workspace (ID=0xC700000A)
000167: Dec 16 07:05:34.468 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000168: Dec 16 07:05:34.468 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000169: Dec 16 07:05:34.468 London: DHCPD: no option 125
000170: Dec 16 07:05:34.468 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000171: Dec 16 07:05:35.476 London: DHCPD: client's VPN is .
000172: Dec 16 07:05:35.476 London: DHCPD: No option 125
000173: Dec 16 07:05:35.476 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000174: Dec 16 07:05:35.476 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000175: Dec 16 07:05:35.476 London: DHCPD: no option 125
000176: Dec 16 07:05:35.476 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000177: Dec 16 07:05:37.520 London: DHCPD: client's VPN is .
000178: Dec 16 07:05:37.520 London: DHCPD: No option 125
000179: Dec 16 07:05:37.520 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000180: Dec 16 07:05:37.520 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000181: Dec 16 07:05:37.524 London: DHCPD: no option 125
000182: Dec 16 07:05:37.524 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000183: Dec 16 07:05:40.532 London: DHCPD: client's VPN is .
000184: Dec 16 07:05:40.532 London: DHCPD: No option 125
000185: Dec 16 07:05:40.532 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000186: Dec 16 07:05:40.532 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000187: Dec 16 07:05:40.532 London: DHCPD: no option 125
000188: Dec 16 07:05:40.532 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000189: Dec 16 07:05:43.540 London: DHCPD: client's VPN is .
000190: Dec 16 07:05:43.540 London: DHCPD: No option 125
000191: Dec 16 07:05:43.540 London: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI1.
000192: Dec 16 07:05:43.540 London: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.13).DHCPD: Setting only requested parameters
000193: Dec 16 07:05:43.540 London: DHCPD: no option 125
000194: Dec 16 07:05:43.540 London: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
Denham_887#
000195: Dec 16 07:05:48.884 London: DHCPD: client's VPN is .
000196: Dec 16 07:05:48.884 London: DHCPD: No option 125
000197: Dec 16 07:05:48.884 London: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI1.
000198: Dec 16 07:05:48.884 London: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.12).DHCPD: Setting only requested parameters
000199: Dec 16 07:05:48.884 London: DHCPD: no option 125
000200: Dec 16 07:05:48.884 London: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
887VA-W dhcp config:
887#sh run | section dhcp
no ip dhcp use vrf connected
ip dhcp binding cleanup interval 10
no ip dhcp conflict logging
ip dhcp pool home
network 172.27.44.0 255.255.255.0
dns-server 208.67.222.222 208.67.220.220
default-router 172.27.44.1
ip dhcp pool test
import all
network 11.1.1.0 255.255.255.0
default-router 11.1.1.1
dns-server 208.67.222.222 208.67.220.220
ip dhcp pool guest
import all
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
dns-server 208.67.222.222 208.67.220.220
877-W Debug - Success:
877#deb ip dhcp se
877#deb ip dhcp server pa
DHCP server packet debugging is on.
877#deb ip dhcp server ev
DHCP server event debugging is on.
877#
000258: *Jun 23 22:20:07.087 BST: DHCPD: checking for expired leases.
000259: *Jun 23 22:20:14.684 BST: %DOT11-6-ASSOC: Interface Dot11Radio0, Station 1828.6199.7ba9 Associated SSID[guest] AUTH_TYPE[OPEN] KEY_MGMT[WPAv2 PSK]
000260: *Jun 23 22:20:16.289 BST: DHCPD: Sending notification of DISCOVER:
000261: *Jun 23 22:20:16.289 BST: DHCPD: htype 1 chaddr 1828.6199.7ba8
000262: *Jun 23 22:20:16.289 BST: DHCPD: remote id 020a00000a010101f2000000
000263: *Jun 23 22:20:16.289 BST: DHCPD: circuit id 00000000
000264: *Jun 23 22:20:16.289 BST: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI2.
000265: *Jun 23 22:20:16.289 BST: DHCPD: Seeing if there is an internally specified pool class:
000266
*Jun 23 22:20:16.289 BST: DHCPD: htype 1 chaddr 1828.6199.7ba8
000267: *Jun 23 22:20:16.289 BST: DHCPD: remote id 020a00000a010101f2000000
000268: *Jun 23 22:20:16.289 BST: DHCPD: circuit id 00000000
000269: *Jun 23 22:20:16.289 BST: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.9).
000270: *Jun 23 22:20:16.289 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
000271: *Jun 23 22:20:16.493 BST: DHCPD: DHCPREQUEST received from client 0118.2861.997b.a8.
000272: *Jun 23 22:20:16.493 BST: DHCPD: Sending notification of ASSIGNMENT:
000273: *Jun 23 22:20:16.493 BST: DHCPD: address 10.1.1.9 mask 255.255.255.0
000274: *Jun 23 22:20:16.493 BST: DHCPD: htype 1 chaddr 1828.6199.7ba8
000275: *Jun 23 22:20:16.493 BST: DHCPD: lease time remaining (secs) = 86400
000276: *Jun 23 22:20:16.493 BST: DHCPD: Appending system default domain
000278: *Jun 23 22:20:16.493 BST: DHCPD: Sending DHCPACK to client 0118.2861.997b.a8 (10.1.1.9).
000279: *Jun 23 22:20:16.493 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
000280: *Jun 23 22:20:17.089 BST: DHCPD: checking for expired leases.
000281: *Jun 23 22:20:18.097 BST: %SYS-5-CONFIG_I: Configured from console by vty0
Denham#
000282: *Jun 23 22:20:21.314 BST: DHCPD: Sending notification of DISCOVER:
000283: *Jun 23 22:20:21.314 BST: DHCPD: htype 1 chaddr 0019.fba4.b21a
000284: *Jun 23 22:20:21.314 BST: DHCPD: remote id 020a00000a010101f2000000
000285: *Jun 23 22:20:21.314 BST: DHCPD: circuit id 00000000
000286: *Jun 23 22:20:21.314 BST: DHCPD: DHCPDISCOVER received from client 0019.fba4.b21a on interface BVI2.
000287: *Jun 23 22:20:21.314 BST: DHCPD: Seeing if there is an internally specified pool class:
000288: *
Jun 23 22:20:21.314 BST: DHCPD: htype 1 chaddr 0019.fba4.b21a
000289: *Jun 23 22:20:21.314 BST: DHCPD: remote id 020a00000a010101f2000000
000290: *Jun 23 22:20:21.314 BST: DHCPD: circuit id 00000000
000291: *Jun 23 22:20:21.314 BST: DHCPD: Sending DHCPOFFER to client 0019.fba4.b21a (10.1.1.8).
000292: *Jun 23 22:20:21.314 BST: DHCPD: broadcasting BOOTREPLY to client 0019.fba4.b21a.
000293: *Jun 23 22:20:21.406 BST: DHCPD: DHCPREQUEST received from client 0019.fba4.b21a.
000294: *Jun 23 22:20:21
406 BST: DHCPD: Sending notification of ASSIGNMENT:
000295: *Jun 23 22:20:21.406 BST: DHCPD: address 10.1.1.8 mask 255.255.255.0
000296: *Jun 23 22:20:21.406 BST: DHCPD: htype 1 chaddr 0019.fba4.b21a
000297: *Jun 23 22:20:21.406 BST: DHCPD: lease time remaining (secs) = 86400
000298: *Jun 23 22:20:21.406 BST: DHCPD: Can't find any hostname to update
000299: *Jun 23 22:20:21.406 BST: DHCPD: Sending DHCPACK to client 0019.fba4.b21a (10.1.1.8).
000300: *Jun 23 22:20:21.406 BST: DHCPD: broadcasting
BOOTREPLY to client 0019.fba4.b21a.
000302: *Jun 23 22:20:33.049 BST: DHCPD: Sending notification of DISCOVER:
000303: *Jun 23 22:20:33.049 BST: DHCPD: htype 1 chaddr 1828.6199.7ba8
000304: *Jun 23 22:20:33.049 BST: DHCPD: remote id 020a00000a010101f2000000
000305: *Jun 23 22:20:33.049 BST: DHCPD: circuit id 00000000
000306: *Jun 23 22:20:33.049 BST: DHCPD: DHCPDISCOVER received from client 0118.2861.997b.a8 on interface BVI2.
000307: *Jun 23 22:20:33.049 BST: DHCPD: Seeing if there is an internally specified pool class:
000308
Denham#: *Jun 23 22:20:33.049 BST: DHCPD: htype 1 chaddr 1828.6199.7ba8
000309: *Jun 23 22:20:33.049 BST: DHCPD: remote id 020a00000a010101f2000000
000310: *Jun 23 22:20:33.049 BST: DHCPD: circuit id 00000000
000311: *Jun 23 22:20:33.049 BST: DHCPD: Sending DHCPOFFER to client 0118.2861.997b.a8 (10.1.1.9).
000312: *Jun 23 22:20:33.053 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8.
000313: *Jun 23 22:20:33.081 BST: DHCPD: DHCPREQUEST received from client 0118.2861.997b.a8.
000314: *Jun 23
Denham# 22:20:33.081 BST: DHCPD: Sending notification of ASSIGNMENT:
000315: *Jun 23 22:20:33.081 BST: DHCPD: address 10.1.1.9 mask 255.255.255.0
000316: *Jun 23 22:20:33.081 BST: DHCPD: htype 1 chaddr 1828.6199.7ba8
000317: *Jun 23 22:20:33.081 BST: DHCPD: lease time remaining (secs) = 86400
000318: *Jun 23 22:20:33.081 BST: DHCPD: Appending system default domain
000319: *Jun 23 22:20:33.085 BST: DHCPD: Using hostname 'skywirelessconnector.indahouse.dyndns.org.' for dynamic update (from hostname opti
indahouse#uon)
000320: *Jun 23 22:20:33.085 BST: DHCPD: Sending DHCPACK to client 0118.2861.997b.a8 (10.1.1.9).
000321: *Jun 23 22:20:33.085 BST: DHCPD: broadcasting BOOTREPLY to client 1828.6199.7ba8. -
Once again, an update appears to have broken Messages/Jabber's ability to authenticate AD users after the 10.9.2/Server 3.0.3 update even though it was working well before. Hoping someone here has some ideas for how to help!
I can log in just fine as a local user (e.g. [email protected]), but no luck with AD users (e.g. [email protected]). As always, it fails with no intelligible error message whatsoever:
Mar 1 09:46:00 comet.ADdomain.private jabberd/c2s[604]: [9] [::ffff:76.24.227.229, port=58658] connect
Mar 1 09:46:01 comet.ADdomain.private jabberd/c2s[604]: [9] [::ffff:76.24.227.229, port=58658] disconnect jid=unbound, packets: 0
Mar 1 09:48:00 comet.ADdomain.private jabberd/c2s[604]: [9] [::ffff:76.24.227.229, port=58667] connect
Mar 1 09:48:01 comet.ADdomain.private jabberd/c2s[604]: [9] [::ffff:76.24.227.229, port=58667] disconnect jid=unbound, packets: 0
I reset the jabber server configuration as described here to no avail: https://discussions.apple.com/thread/5354428
The DNS configuration looks good:
changeip -checkhostname
Primary address = 10.0.17.15
Current HostName = comet.ADdomain.private
DNS HostName = comet.ADdomain.private
The names match. There is nothing to change.
dirserv:success = "success"
The Jabber status from jabber:
serveradmin fullstatus jabber
jabber:state = "RUNNING"
jabber:roomsState = "RUNNING"
jabber:logPaths:PROXY_LOG = "/private/var/jabberd/log/proxy65.log"
jabber:logPaths:MUC_STD_LOG = "/var/log/system.log"
jabber:logPaths:JABBER_LOG = "/var/log/system.log"
jabber:proxyState = "RUNNING"
jabber:currentConnections = "0"
jabber:currentConnectionsPort1 = "0"
jabber:currentConnectionsPort2 = "0"
jabber:pluginVersion = "10.8.211"
jabber:servicePortsAreRestricted = "NO"
jabber:servicePortsRestrictionInfo = _empty_array
jabber:hostsCommaDelimitedString = "comet.ADdomain.private"
jabber:hosts:_array_index:0 = "comet.ADdomain.private"
jabber:setStateVersion = 1
jabber:startedTime = "2014-03-01 17:39:06 +0000"
jabber:readWriteSettingsVersion = 1
Full jabber server startup log:
Mar 1 09:52:19 comet.ADdomain.private servermgrd[180]: servermgr_jabber[N]: waiting for jabberd to finish startup...
Mar 1 09:52:19 comet.ADdomain.private jabberd/router[1785]: starting up
Mar 1 09:52:19 comet.ADdomain.private jabberd/router[1785]: loaded user table (1 users)
Mar 1 09:52:19 comet.ADdomain.private jabberd/router[1785]: couldn't open filter file /etc/jabberd/router-filter.xml: No such file or directory
Mar 1 09:52:19 comet.ADdomain.private servermgrd[180]: servermgr_jabber[N]: jabberd service startup completed.
Mar 1 09:52:19 comet.ADdomain.private jabberd/c2s[1786]: starting up
Mar 1 09:52:19 comet.ADdomain.private jabberd/s2s[1787]: starting up (interval=60, queue=60, keepalive=0, idle=86400)
Mar 1 09:52:19 comet.ADdomain.private jabberd/sm[1784]: starting up
Mar 1 09:52:19 comet.ADdomain.private jabberd/c2s[1786]: modules search path: /Applications/Server.app/Contents/ServerRoot/usr/libexec/jabberd/modules
Mar 1 09:52:19 comet.ADdomain.private jabberd/c2s[1786]: initialized auth module 'apple_od'
Mar 1 09:52:19 comet.ADdomain.private jabberd/sm[1784]: initialised storage driver 'sqlite'
Mar 1 09:52:19 comet.ADdomain.private jabberd/sm[1784]: modules search path: /Applications/Server.app/Contents/ServerRoot/usr/libexec/jabberd/modules
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-last' added to chain 'sess-end' (order 0 index 0 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'validate' added to chain 'in-sess' (order 0 index 1 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'privacy' added to chain 'in-sess' (order 1 index 2 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'roster' added to chain 'in-sess' (order 2 index 3 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=5347] listening for incoming connections
Mar 1 09:52:20 comet.ADdomain.private jabberd/c2s[1786]: [comet.ADdomain.private] configured; realm=comet.ADdomain.private, registration disabled, using PEM:/etc/certificates/mail.ADdomainbio.com.E41BBC081993E348B26181D9CB334A28137A8D8D.concat.pem
Mar 1 09:52:20 comet.ADdomain.private jabberd/c2s[1786]: attempting connection to router at 127.0.0.1, port=5347
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49353] connect
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49353] authenticated as jabberd
Mar 1 09:52:20 comet.ADdomain.private jabberd/c2s[1786]: connection to router established
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [c2s] online (bound to 127.0.0.1, port 49353)
Mar 1 09:52:20 comet.ADdomain.private jabberd/c2s[1786]: [::, port=5222] listening for connections
Mar 1 09:52:20 comet.ADdomain.private jabberd/c2s[1786]: [::, port=5223] listening for SSL connections
Mar 1 09:52:20 comet.ADdomain.private jabberd/c2s[1786]: ready for connections
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'vacation' added to chain 'in-sess' (order 3 index 4 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/s2s[1787]: attempting connection to router at 127.0.0.1, port=5347
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49354] connect
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49354] authenticated as jabberd
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-vcard' added to chain 'in-sess' (order 4 index 5 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/s2s[1787]: connection to router established
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [s2s] set as default route
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [s2s] online (bound to 127.0.0.1, port 49354)
Mar 1 09:52:20 comet.ADdomain.private jabberd/s2s[1787]: ready for connections
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-ping' added to chain 'in-sess' (order 5 index 6 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-private' added to chain 'in-sess' (order 6 index 7 seq 0)
Mar 1 09:52:20 comet.ADdomain.private Rooms[1792]: Starting up...
Mar 1 09:52:20 comet.ADdomain.private Rooms[1792]: Loading persistent rooms from disk...
Mar 1 09:52:20 comet.ADdomain.private Rooms[1792]: Finished loading rooms from disk
Mar 1 09:52:20 comet.ADdomain.private Rooms[1792]: Connecting to XMPP server at 'comet.ADdomain.private' as 'rooms.comet.ADdomain.private'...
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'disco' added to chain 'in-sess' (order 7 index 8 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'amp' added to chain 'in-sess' (order 8 index 9 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'offline' added to chain 'in-sess' (order 9 index 10 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'announce' added to chain 'in-sess' (order 10 index 11 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'presence' added to chain 'in-sess' (order 11 index 12 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'deliver' added to chain 'in-sess' (order 12 index 13 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'session' added to chain 'in-router' (order 0 index 14 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'validate' added to chain 'in-router' (order 1 index 1 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'presence' added to chain 'in-router' (order 2 index 12 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'privacy' added to chain 'in-router' (order 3 index 2 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'privacy' added to chain 'out-router' (order 0 index 2 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-last' added to chain 'pkt-sm' (order 0 index 0 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-ping' added to chain 'pkt-sm' (order 1 index 6 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-time' added to chain 'pkt-sm' (order 2 index 15 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-version' added to chain 'pkt-sm' (order 3 index 16 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'amp' added to chain 'pkt-sm' (order 4 index 9 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'disco' added to chain 'pkt-sm' (order 5 index 8 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'presence' added to chain 'pkt-sm' (order 9 index 12 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 3)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-last' added to chain 'pkt-user' (order 7 index 0 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'active' added to chain 'user-load' (order 0 index 19 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'autobuddy' added to chain 'user-load' (order 1 index 20 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'roster' added to chain 'user-load' (order 2 index 3 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'roster-publish' added to chain 'user-load' (order 3 index 21 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'privacy' added to chain 'user-load' (order 4 index 2 seq 3)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'active' added to chain 'user-create' (order 0 index 19 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'active' added to chain 'user-delete' (order 0 index 19 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'offline' added to chain 'user-delete' (order 2 index 10 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'privacy' added to chain 'user-delete' (order 3 index 2 seq 4)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'roster' added to chain 'user-delete' (order 4 index 3 seq 3)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'vacation' added to chain 'user-delete' (order 5 index 4 seq 3)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-last' added to chain 'user-delete' (order 6 index 0 seq 3)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-private' added to chain 'user-delete' (order 7 index 7 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-vcard' added to chain 'user-delete' (order 8 index 5 seq 2)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'iq-version' added to chain 'disco-extend' (order 0 index 16 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: module 'help' added to chain 'disco-extend' (order 1 index 17 seq 1)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: version: jabberd sm 2.2.17-409
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: [comet.ADdomain.private] configured
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: attempting connection to router at 127.0.0.1, port=5347
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49355] connect
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49355] authenticated as jabberd
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: connection to router established
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [sm] online (bound to 127.0.0.1, port 49355)
Mar 1 09:52:20 comet.ADdomain.private jabberd/sm[1784]: sm ready for sessions
Mar 1 09:52:20 comet.ADdomain.private jabberd/router[1785]: [comet.ADdomain.private] online (bound to 127.0.0.1, port 49355)
Mar 1 09:52:22 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49356] connect
Mar 1 09:52:22 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49356] authenticated as proxy65.comet.ADdomain.private
Mar 1 09:52:22 comet.ADdomain.private jabberd/router[1785]: [proxy65.comet.ADdomain.private] online (bound to 127.0.0.1, port 49356)
Mar 1 09:52:23 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49357] connect
Mar 1 09:52:24 comet.ADdomain.private jabberd/router[1785]: [127.0.0.1, port=49357] authenticated as rooms.comet.ADdomain.private
Mar 1 09:52:24 comet.ADdomain.private jabberd/router[1785]: [rooms.comet.ADdomain.private] online (bound to 127.0.0.1, port 49357)
Mar 1 09:52:24 comet.ADdomain.private Rooms[1792]: Successfully connected to XMPP server, ready for activity
I am not sure if it's attempting to authenticate to AD or not, and if so, why it might be failing. Any suggestions would be greatly appreciated!uscadvit wrote:
Here is the output without the name of our AD:
Advanced Options - User Experience
Create mobile account at login = Disabled
Require confirmation = Enabled
Force home to startup disk = Enabled
Mount home as sharepoint = Enabled
Use Windows UNC path for home = Enabled
Network protocol to be used = smb
Default user Shell = /bin/bash
Advanced Options - Mappings
Mapping UID to attribute = not set
Mapping user GID to attribute = not set
Mapping group GID to attribute = not set
Generate Kerberos authority = Enabled
Advanced Options - Administrative
Preferred Domain controller = not set
Allowed admin groups = not set
Authentication from any domain = Enabled
Packet signing = allow
Packet encryption = allow
Password change interval = 14
Restrict Dynamic DNS updates = not set
Namespace mode = domain
That looks correct. Lets collect a few more config items.
Copy / paste the output of this command when run against c2s.xml:
sudo grep '<id require-starttls="true" pemfile="' /Library/Server/Messages/Config/jabberd/c2s.xml
Ours looks like this:
<id require-starttls="true" pemfile="/etc/certificates/chat.example.com.1234567890.concat.pem" private-key-password="12345678-1234-1234-12345678" cachain="/etc/certificates/chat.example.com.1234567890.chain.pem" realm="example.com">example.com</id>
Copy / paste the output of this command when run against sm.xml. To give us context, it will display the 6 lines above and below the text:
sudo grep -C 6 'If not set, the SM id is used. -->' /Library/Server/Messages/Config/jabberd/sm.xml
Ours looks like this:
<!-- Local network configuration --> <local> <!-- Who we identify ourselves as. Users will have this as the domain part of their JID. If you want your server to be accessible from other Jabber servers, this IDs must be FQDN resolvable by DNSes. If not set, the SM id is used. --> <id>example.com</id> <!-- <id>vhost1.localdomain</id> <id>vhost2.localdomain</id> --> </local>
Copy / paste the output of this command:
sudo serveradmin settings jabber
Ours looks like this:
jabber:dataLocation = "/Library/Server/Messages"jabber:s2sRestrictDomains = nojabber:jabberdDatabasePath = "/Library/Server/Messages/Data/sqlite/jabberd2.db"jabber:sslCAFile = "/etc/certificates/chat.example.com.1234567890.chain.pem"jabber:jabberdClientPortTLS = 5222jabber:sslKeyFile = "/etc/certificates/chat.example.com.1234567890.concat.pem"jabber:initialized = yesjabber:enableXMPP = nojabber:savedChatsArchiveInterval = 7jabber:authLevel = "STANDARD"jabber:hostsCommaDelimitedString = "example.com"jabber:jabberdClientPortSSL = 5223jabber:requireSecureS2S = nojabber:savedChatsLocation = "/Library/Server/Messages/Data/message_archives"jabber:enableSavedChats = nojabber:enableAutoBuddy = yesjabber:s2sAllowedDomains = _empty_arrayjabber:logLevel = "ALL"jabber:hosts:_array_index:0 = "example.com"jabber:eventLogArchiveInterval = 7jabber:jabberdS2SPort = 0
Also, while you're troubleshooting, I found Adium's debug window to be invaluble for showing errors during logon (even if you plan to use Messages).
You can open it in debug mode by holding option + click Adium.app, select "start in debug mode". Then in Adium menu > Debug window. -
WAP561 - After 2-3 days the AP will not allow clients to fully authenticate (628911547)
Have a total of 5 APs and every 2-3 days these devices seem to not allow clients to connect. Clients appear to associate but never authenticate. I have opened a case with Cisco (Case number in title) but want to see if anyone else is having this issue and how you may have resolved this.
I received an email from an engineer and one of the options he asked me to change was not even an option on the screen. I have UNTAGGED VLAN selected however MANAGEMENT VLAN is not an option. Below is his email.
Making a bit of reasearch i discovered that maybe you have fallen into a firmware bug.
It should be related to VLAN.
If you go on VLAn and IPv4 setting you should see somewhere the MANAGEMENT VLAN and UNTAGGED VLAN settings.
Both of them should be ENABLED.
On the next fw release this should be fixed because it’s normal to have both disabled, but just to workaround the problem you could try with this settings enabled and see if the “freeze” is not happening again.
Please update me so i can close this case or go on with the process.The Fix Multicast rate setting can be found on the Wireless - Radio Page. In the advanced settings section. Below the
Transmit Power settings.
Thanks
Eric Moyers .:|:.:|:.
Cisco Small Business US STAC Advanced Support Engineer
Wireless Subject Matter Expert
CCNA, CCNA-Wireless
866-606-1866
Mon - Fri 09:30 - 18:30 (UTC - 05:00)
*Please rate the Post so other will know when an answer has been found. -
Web test result for a URL which needs a client certificate to authenticate
Hi,
we want to check URL response of a .asmx URL which needs a client certificate for authenticating.
I got the cert object and then passed it to invoke-webrequest cmdlet, but no matter what i try I always get this error
“The underlying connection was closed”.
code1
$WebClient = New-Object System.Net.WebClient
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = {$true}
$WebClient.DownloadString(“https://server1/mywebservices/myser.asmx”)
code2
$url=”https://server1/mywebservices/myser.asmx”
$cert=(Get-ChildItem cert: -Recurse | where {$_.Thumbprint -eq “abcdefgh3333…..something”}| Select -First 1)
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = {$true}
#load my client certificate defined by thumbprint
$HTTP_Request = [System.Net.WebRequest]::Create($url)
$HTTP_Request.ClientCertificates.Add($cert )
# We then get a response from the site.
$HTTP_Response = $HTTP_Request.GetResponse()
Can someone please help me.
Thanks
ManishHi Anna
Thanks for the reply.
I used the function referred earlier in my script, as below.
It is still throwing error. However it does work in powershell v2.
Is there any specific change required in the script to make it work with V3. I tried invoke-webrequest and it failed too.
function Ignore-SSLCertificates
$Provider = New-Object Microsoft.CSharp.CSharpCodeProvider
$Compiler = $Provider.CreateCompiler()
$Params = New-Object System.CodeDom.Compiler.CompilerParameters
$Params.GenerateExecutable = $false
$Params.GenerateInMemory = $true
$Params.IncludeDebugInformation = $false
$Params.ReferencedAssemblies.Add("System.DLL") > $null
$TASource=@'
namespace Local.ToolkitExtensions.Net.CertificatePolicy
public class TrustAll : System.Net.ICertificatePolicy
public bool CheckValidationResult(System.Net.ServicePoint sp,System.Security.Cryptography.X509Certificates.X509Certificate cert, System.Net.WebRequest req, int problem)
return true;
$TAResults=$Provider.CompileAssemblyFromSource($Params,$TASource)
$TAAssembly=$TAResults.CompiledAssembly
## We create an instance of TrustAll and attach it to the ServicePointManager
$TrustAll = $TAAssembly.CreateInstance("Local.ToolkitExtensions.Net.CertificatePolicy.TrustAll")
[System.Net.ServicePointManager]::CertificatePolicy = $TrustAll
$url="https://server1/mywebservices/myser.asmx"
$certs = Get-ChildItem Cert:\CurrentUser\My | where {
$_.Thumbprint -eq “abcdefgh3333…..something”}
$HTTP_Request = [System.Net.WebRequest]::Create($url)
Ignore-SSLCertificates
try
$HTTP_Request.ClientCertificates.Add($certs )
# We then get a response from the site.
$HTTP_Response = $HTTP_Request.GetResponse()
catch [System.exception]
Write-Error $error[0].Exception
$HTTP_Status = [int]$HTTP_Response.StatusCode
Manish -
10.4.11 client don't authenticate on replica server 10.5
We' ve got a 10.5 OD Master and a 10.5 OD Replica.
10.5 Clients (mobile) can log on on master, on the replica (if the master is down) and also locally (if all servers are down)
10.4 Clients (mobile) can log on on master and locally (if all servers are down).
If the OD Master is down and OD Replica is up our 10.4 Clients can't log on.
Any Ideas ?
I think Replica Server is OK, Leopard Clients use it with any problems.
This is the Debug log with the command sudo killall -USR1 DirectoryService
2008-02-27 14:56:47 CET - CLDAPNode: EstablishConnection - Attempting Replica connect to = 192.168.236.11
2008-02-27 14:56:47 CET - CLDAPNode: EstablishConnection - Attempting Replica connect to = 192.168.236.11
2008-02-27 14:56:47 CET - CLDAPNode: EstablishConnection - Attempting Replica connect to = 192.168.236.7
2008-02-27 14:56:47 CET - CLDAPNode: EstablishConnection - Attempting Replica connect to = 192.168.236.200
2008-02-27 14:56:47 CET - CLDAPNode: EstablishConnection - Attempting Replica connect to = 192.168.236.12
2008-02-27 14:56:47 CET - CLDAPNode: EstablishConnection - Using replica with IP Address = 192.168.236.12 for read
2008-02-27 14:56:48 CET - CLDAPNode: Status Node: zeus.marinarinaldi.it -- Server: 192.168.236.12 - Time: 30 sec -- Idle
2008-02-27 14:56:48 CET - CLDAPNode: EstablishConnection - Previous replica with IP Address = 192.168.236.12 responded for read
2008-02-27 14:56:48 CET - CLDAPNode: EstablishConnection - Using replica with IP Address = 192.168.236.12 for read
2008-02-27 14:56:52 CET - Client: automount, PID: 115, API: dsGetRecordList(), Search Used : DAC : 1 : Node Ref = 16777594 : Requested Rec Names = 192.168.230.92 : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Neighborhoods
2008-02-27 14:56:52 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAC : 1 : Node Ref = 16777595 : Requested Rec Names = 192.168.230.92 : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Neighborhoods
2008-02-27 14:56:52 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAC : 1 : Node Ref = 16777596 : Requested Rec Names = 192.168.230.92 : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Neighborhoods
2008-02-27 14:56:52 CET - Client: automount, PID: 115, API: dsGetRecordList(), Search Used : DAC : 1 : Node Ref = 16777594 : Requested Rec Names = 192.168.230.0/0 : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Neighborhoods
2008-02-27 14:56:52 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAC : 1 : Node Ref = 16777595 : Requested Rec Names = 192.168.230.0/0 : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Neighborhoods
2008-02-27 14:56:52 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAC : 1 : Node Ref = 16777596 : Requested Rec Names = 192.168.230.0/0 : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Neighborhoods
2008-02-27 14:57:01 CET - CLDAPNode: Status Node: zeus.marinarinaldi.it -- Server: 192.168.236.12 - Time: 30 sec -- Idle
2008-02-27 14:57:13 CET - CLDAPv3Plugin: LookupAttribute value found ;ApplePasswordServer;0x47a1d9e9390714bd0000005e0000005e,1024 35 1171980931692576885169214171482044657316089548207646087439857899663093596090086 18500022930664585710028775071071758117055259084909099653496495460064998013214753 57636678646248863040314133862180622725241725977528845328297304507793332329161400 1203839046263891507134157771344760551355337344094111692136608729188419 [email protected]:192.168.236.11
2008-02-27 14:57:13 CET - CLDAPv3Plugin: LookupAttribute value found ;Kerberosv5;0x47a1d9e9390714bd0000005e0000005e;[email protected] ;ZEUS.MARINARINALDI.IT;1024 35 1171980931692576885169214171482044657316089548207646087439857899663093596090086 18500022930664585710028775071071758117055259084909099653496495460064998013214753 57636678646248863040314133862180622725241725977528845328297304507793332329161400 1203839046263891507134157771344760551355337344094111692136608729188419 [email protected]:192.168.236.11
2008-02-27 14:57:13 CET - Internal Dispatch, API: dsOpenDirNode(), PasswordServer Used : DAC : Dir Ref = 16777667 : Node Name = /PasswordServer/192.168.236.11
2008-02-27 14:57:13 CET - CPSPlugIn::OpenDirNode path = /PasswordServer/192.168.236.11
2008-02-27 14:57:31 CET - CLDAPNode: Status Node: zeus.marinarinaldi.it -- Server: 192.168.236.12 - Time: 30 sec -- Idle
192.168.236.11
192.168.236.12
2008-02-27 14:58:01 CET - CLDAPNode: Status Node: zeus.marinarinaldi.it -- Server: 192.168.236.12 - Time: 30 sec -- Idle
2008-02-27 14:58:31 CET - CLDAPNode: Status Node: zeus.marinarinaldi.it -- Server: 192.168.236.12 - Time: 60 sec -- Idle
2008-02-27 14:59:01 CET - CLDAPNode: Status Node: zeus.marinarinaldi.it -- Server: 192.168.236.12 - Time: 30 sec -- Idle
I really can't find where the problem is, why can't i find any error in this log?
Thanks, Sandra.
Thanks,
Sandratiger client 10.4.11 bind on the replica (the master is master down)
mrssi-ard-server:~ cedadmin$ sudo killall -USR1 DirectoryService
mrssi-ard-server:~ cedadmin$ dirt -u mrcgemaris -p mrcgemaris
Call to dsGetRecordList returned count = 1 with Status : eDSNoErr : (0)
Call to checkpw(): Bad Password
path: /LDAPv3/venere.marinarinaldi.it
Username: mrcgemaris
Password: mrcgemaris
Error : eDSAuthNoAuthServerFound : (-14102)
LOG SERVER
Server Replica (venere) nothing to see
Server Master (zeus) is down....
LOG CLIENT
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsOpenDirService(), Server Used : DAR : Dir Ref 16777692 : Result code = 0
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsFindDirNodes(), Server Used : DAC : Dir Ref 16777692 : Data buffer size = 2048
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsFindDirNodes(), Server Used : DAR : 1 : Dir Ref = 16777692 : Requested nodename = /Search
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsFindDirNodes(), Server Used : DAR : 2 : Dir Ref = 16777692 : Result code = 0
2008-03-27 15:49:34 CET - Client: Requesting dsOpenDirNode with PID = 384, UID = 502, and EUID = 502
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsOpenDirNode(), Search Used : DAC : Dir Ref = 16777692 : Node Name = /Search
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsOpenDirNode(), Search Used : DAR : Dir Ref = 16777692 : Node Ref = 16777693 : Result code = 0
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsGetRecordList(), Search Used : DAC : 1 : Node Ref = 16777693 : Requested Rec Names = mrcgemaris : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Users
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsGetRecordList(), Search Used : DAC : 2 : Node Ref = 16777693 : Requested Attrs = dsAttrTypeStandard:AppleMetaNodeLocation;dsAttrTypeStandard:RecordName : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 0
2008-03-27 15:49:34 CET - Client: Requesting dsOpenDirNode with PID = 0, UID = 0, and EUID = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), NetInfo Used : DAC : Dir Ref = 16777218 : Node Name = /NetInfo/DefaultLocalNode
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), NetInfo Used : DAR : Dir Ref = 16777218 : Node Ref = 16777694 : Result code = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAC : 1 : Node Ref = 16777694 : Requested Rec Names = mrcgemaris : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Users
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAC : 2 : Node Ref = 16777694 : Requested Attrs = dsAttrTypeStandard:AppleMetaNodeLocation;dsAttrTypeStandard:RecordName : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAR : Node Ref = 16777694 : Number of Found Records = 0 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:34 CET - Client: Requesting dsOpenDirNode with PID = 0, UID = 0, and EUID = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), LDAPv3 Used : DAC : Dir Ref = 16777218 : Node Name = /LDAPv3/venere.marinarinaldi.it
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), LDAPv3 Used : DAR : Dir Ref = 16777218 : Node Ref = 16777695 : Result code = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAC : 1 : Node Ref = 16777695 : Requested Rec Names = mrcgemaris : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Users
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAC : 2 : Node Ref = 16777695 : Requested Attrs = dsAttrTypeStandard:AppleMetaNodeLocation;dsAttrTypeStandard:RecordName : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAR : Node Ref = 16777695 : Number of Found Records = 1 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: dsGetRecordList(), Search Used : DAR : Node Ref = 16777693 : Number of Found Records = 1 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:34 CET - Client: dirt, PID: 384, API: checkpw(), Server Used : dsmig DAC : Username = mrcgemaris
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), Search Used : DAC : 1 : Node Ref = 16777321 : Requested Rec Names = mrcgemaris : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Users
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), Search Used : DAC : 2 : Node Ref = 16777321 : Requested Attrs = dsAttrTypeStandard:AppleMetaNodeLocation;dsAttrTypeStandard:RecordName : Attr Type Only Flag = 0 : Record Count Limit = 1 : Continue Data = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAC : 1 : Node Ref = 16777658 : Requested Rec Names = mrcgemaris : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Users
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAC : 2 : Node Ref = 16777658 : Requested Attrs = dsAttrTypeStandard:AppleMetaNodeLocation;dsAttrTypeStandard:RecordName : Attr Type Only Flag = 0 : Record Count Limit = 1 : Continue Data = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), NetInfo Used : DAR : Node Ref = 16777658 : Number of Found Records = 0 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAC : 1 : Node Ref = 16777685 : Requested Rec Names = mrcgemaris : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:Users
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAC : 2 : Node Ref = 16777685 : Requested Attrs = dsAttrTypeStandard:AppleMetaNodeLocation;dsAttrTypeStandard:RecordName : Attr Type Only Flag = 0 : Record Count Limit = 1 : Continue Data = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), LDAPv3 Used : DAR : Node Ref = 16777685 : Number of Found Records = 1 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsGetRecordList(), Search Used : DAR : Node Ref = 16777321 : Number of Found Records = 1 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:34 CET - Client: Requesting dsOpenDirNode with PID = 0, UID = 0, and EUID = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), LDAPv3 Used : DAC : Dir Ref = 16777320 : Node Name = /LDAPv3/venere.marinarinaldi.it
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), LDAPv3 Used : DAR : Dir Ref = 16777320 : Node Ref = 16777696 : Result code = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsDoDirNodeAuth(), LDAPv3 Used : DAC : Node Ref = 16777696 : User Name = mrcgemaris : Auth Method = dsAuthMethodStandard:dsAuthNodeNativeCanUseClearText : Auth Only Flag = 1 : Continue Data = 0
2008-03-27 15:49:34 CET - CLDAPv3Plugin: DoAuthenticationOnRecordType - Attempting use of authentication method dsAuthMethodStandard:dsAuthNodeNativeCanUseClearText
2008-03-27 15:49:34 CET - CLDAPv3Plugin: Attempting to get dsAttrTypeStandard:AuthenticationAuthority
2008-03-27 15:49:34 CET - CLDAPv3Plugin: LookupAttribute value found ;ApplePasswordServer;0x47a1d9e9390714bd0000005e0000005e,1024 35 1171980931692576885169214171482044657316089548207646087439857899663093596090086 18500022930664585710028775071071758117055259084909099653496495460064998013214753 57636678646248863040314133862180622725241725977528845328297304507793332329161400 1203839046263891507134157771344760551355337344094111692136608729188419 [email protected]:192.168.236.11
2008-03-27 15:49:34 CET - CLDAPv3Plugin: LookupAttribute value found ;Kerberosv5;0x47a1d9e9390714bd0000005e0000005e;[email protected] ;ZEUS.MARINARINALDI.IT;1024 35 1171980931692576885169214171482044657316089548207646087439857899663093596090086 18500022930664585710028775071071758117055259084909099653496495460064998013214753 57636678646248863040314133862180622725241725977528845328297304507793332329161400 1203839046263891507134157771344760551355337344094111692136608729188419 [email protected]:192.168.236.11
2008-03-27 15:49:34 CET - CLDAPv3Plugin: DoPasswordServerAuth::
2008-03-27 15:49:34 CET - CLDAPv3Plugin: Attempting use of authentication method dsAuthMethodStandard:dsAuthNodeNativeCanUseClearText
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirService(), Server Used : DAR : Dir Ref 16777697 : Result code = 0
2008-03-27 15:49:34 CET - Client: Requesting dsOpenDirNode with PID = 0, UID = 0, and EUID = 0
2008-03-27 15:49:34 CET - Unable to determine fPluginPtr from node table
2008-03-27 15:49:34 CET - Determined plugin ptr for call
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), PasswordServer Used : DAC : Dir Ref = 16777697 : Node Name = /PasswordServer/192.168.236.11
2008-03-27 15:49:34 CET - CPSPlugIn::OpenDirNode
2008-03-27 15:49:34 CET - CPSPlugIn::OpenDirNode path = /PasswordServer/192.168.236.11
2008-03-27 15:49:34 CET - CPSPlugIn::EndServerSession opens: 2, closes 2
2008-03-27 15:49:34 CET - Determined plugin ptr used and returns result 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsOpenDirNode(), PasswordServer Used : DAR : Dir Ref = 16777697 : Node Ref = 16777698 : Result code = 0
2008-03-27 15:49:34 CET - Internal Dispatch, API: dsDoDirNodeAuth(), PasswordServer Used : DAC : Node Ref = 16777698 : User Name = 0x47a1d9e9390714bd0000005e0000005e,1024 35 1171980931692576885169214171482044657316089548207646087439857899663093596090086 18500022930664585710028775071071758117055259084909099653496495460064998013214753 57636678646248863040314133862180622725241725977528845328297304507793332329161400 1203839046263891507134157771344760551355337344094111692136608729188419 [email protected] : Auth Method = dsAuthMethodStandard:dsAuthNodeNativeCanUseClearText : Auth Only Flag = 1 : Continue Data = 0
2008-03-27 15:49:34 CET - CPSPlugIn::DoAuthentication
2008-03-27 15:49:34 CET - PasswordServer PlugIn: Attempting use of authentication method dsAuthMethodStandard:dsAuthNodeNativeCanUseClearText
2008-03-27 15:49:34 CET - GetAuthMethodConstant siResult=0, uiAuthMethod=1228, mech=
2008-03-27 15:49:34 CET - hexHash=25DDD5DED1651A0CCEB1E2B99DD09FFB
2008-03-27 15:49:34 CET - HandleFirstContact
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsVerifyDirRefNum(), Server Used : DAC : Dir Ref 16777534
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsVerifyDirRefNum(), Server Used : DAR : Dir Ref 16777534 : Result code = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsVerifyDirRefNum(), Server Used : DAC : Dir Ref 16777534
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsVerifyDirRefNum(), Server Used : DAR : Dir Ref 16777534 : Result code = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAC : Dir Ref 16777534 : Data buffer size = 512
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAR : 1 : Dir Ref = 16777534 : Requested nodename = DefaultNetworkNodes
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAR : 2 : Dir Ref = 16777534 : Result code = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAC : Dir Ref 16777534 : Data buffer size = 512
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAR : 1 : Dir Ref = 16777534 : Requested nodename = /SLP/DEFAULT
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAR : 2 : Dir Ref = 16777534 : Result code = 0
2008-03-27 15:49:40 CET - Client: Requesting dsOpenDirNode with PID = 246, UID = 0, and EUID = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsOpenDirNode(), SLP Used : DAC : Dir Ref = 16777534 : Node Name = /SLP/DEFAULT
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsOpenDirNode(), SLP Used : DAR : Dir Ref = 16777534 : Node Ref = 16777699 : Result code = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAC : Dir Ref 16777534 : Data buffer size = 512
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAR : 1 : Dir Ref = 16777534 : Requested nodename = /SMB/MARINARINALDI
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsFindDirNodes(), Server Used : DAR : 2 : Dir Ref = 16777534 : Result code = 0
2008-03-27 15:49:40 CET - Client: Requesting dsOpenDirNode with PID = 246, UID = 0, and EUID = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsOpenDirNode(), SMB Used : DAC : Dir Ref = 16777534 : Node Name = /SMB/MARINARINALDI
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsOpenDirNode(), SMB Used : DAR : Dir Ref = 16777534 : Node Ref = 16777700 : Result code = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAC : 1 : Node Ref = 16777700 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAC : 2 : Node Ref = 16777700 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAR : Node Ref = 16777700 : Number of Found Records = 0 : Continue Data = 16777700 : Result code = 0
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:40 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAC : 1 : Node Ref = 16777700 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAC : 2 : Node Ref = 16777700 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777700
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAR : Node Ref = 16777700 : Number of Found Records = 1 : Continue Data = 16777700 : Result code = 0
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAC : 1 : Node Ref = 16777700 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAC : 2 : Node Ref = 16777700 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777700
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsGetRecordList(), SMB Used : DAR : Node Ref = 16777700 : Number of Found Records = 0 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsCloseDirNode(), SMB Used : DAC : Node Ref = 16777700
2008-03-27 15:49:41 CET - Client: automount, PID: 246, API: dsCloseDirNode(), SMB Used : DAR : Node Ref = 16777700 : Result code = 0
2008-03-27 15:49:42 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:42 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:42 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:43 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:43 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:43 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:44 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:44 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:44 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:45 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:45 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:45 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:46 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:46 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:46 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:47 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:47 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:47 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:48 CET - CLDAPNode: Status Node: venere.marinarinaldi.it -- Server: 192.168.236.12 - Time: 30 sec -- Idle
2008-03-27 15:49:48 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:48 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:48 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:49 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:49 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:49 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:50 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:50 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:50 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:51 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:51 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:51 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:52 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:52 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:52 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:53 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:53 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:53 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 16777699 : Result code = 0
2008-03-27 15:49:54 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 1 : Node Ref = 16777699 : Requested Rec Names = dsRecordsAll : Rec Name Pattern Match:8193 = eDSExact : Requested Rec Types = dsRecTypeStandard:AFPServer;dsRecTypeStandard:SMBServer;dsRecTypeNative:cifs;ds RecTypeStandard:NFS;dsRecTypeNative:webdav;dsRecTypeStandard:FTPServer
2008-03-27 15:49:54 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAC : 2 : Node Ref = 16777699 : Requested Attrs = dsAttributesAll : Attr Type Only Flag = 0 : Record Count Limit = 0 : Continue Data = 16777699
2008-03-27 15:49:54 CET - Client: automount, PID: 246, API: dsGetRecordList(), SLP Used : DAR : Node Ref = 16777699 : Number of Found Records = 0 : Continue Data = 0 : Result code = 0
2008-03-27 15:49:54 CET - Client: automount, PID: 246, API: dsCloseDirNode(), SLP Used : DAC : Node Ref = 16777699
2008-03-27 15:49:54 CET - Client: automount, PID: 246, API: dsCloseDirNode(), SLP Used : DAR : Node Ref = 16777699 : Result code = 0
2008-03-27 15:50:14 CET - CPSPlugIn::DoAuthentication returning -14102
2008-03-27 15:50:14 CET - Internal Dispatch, API: dsDoDirNodeAuth(), PasswordServer Used : DAR : Node Ref = 16777698 : Result code = -14102
2008-03-27 15:50:14 CET - Plug-in call "dsDoDirNodeAuth()" failed with error = -14102.
2008-03-27 15:50:14 CET - Port: 0 Call: dsDoDirNodeAuth() == -14102
2008-03-27 15:50:14 CET - CLDAPv3Plugin: Attempting to get dsAttrTypeStandard:PasswordServerList
2008-03-27 15:50:14 CET - CLDAPv3Plugin: LookupAttribute value found <?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>DecommissionedReplicas</key>
<array>
<string>Replica1</string>
<string>Replica2</string>
<string>Replica3</string>
<string>Replica4</string>
<string>Replica5</string>
<string>Replica6</string>
<string>Replica7</string>
<string>Replica8</string>
</array>
<key>ID</key>
<string>25DDD5DED1651A0CCEB1E2B99DD09FFB</string>
<key>Parent</key>
<dict>
<key>DNS</key>
<string>zeus.marinarinaldi.it</string>
<key>EntryModDate</key>
<date>2008-03-04T14:20:43Z</date>
<key>IDRangeBegin</key>
<string>0x00000000000000000000000000000619</string>
<key>IDRangeEnd</key>
<string>0x0000000000000000000000000000080d</string>
<key>IP</key>
<array>
<string>192.168.236.11</string>
<string>169.254.5.51</string>
</array>
<key>LastSyncDate</key>
<date>2008-03-04T15:45:13Z</date>
<key>ReplicaPolicy</key>
<string>SyncDefault</string>
<key>Replicas</key>
<array>
<dict>
<key>EntryModDate</key>
<date>2008-03-12T10:37:36Z</date>
<key>IDRangeBegin</key>
<string>0x00000000000000000000000000000821</string>
<key>IDRangeEnd</key>
<string>0x00000000000000000000000000000a15</string>
<key>IP</key>
<string>192.168.236.12</string>
<key>ReplicaName</key>
<string>Replica9</string>
<key>SASLRealm</key>
<string>zeus.marinarinaldi.it</string>
<key>SyncInterval</key>
<integer>300</integer>
</dict>
</array>
</dict>
<key>Status</key>
<string>AllowReplication</string>
</dict>
</plist>
2008-03-27 15:50:14 CET - Internal Dispatch, API: dsDoPlugInCustomCall(), PasswordServer Used : DAC : Node Ref = 16777698 : Request Code = 1
2008-03-27 15:50:14 CET - CPSPlugIn::DoPlugInCustomCall
2008-03-27 15:50:14 CET - Internal Dispatch, API: dsDoPlugInCustomCall(), PasswordServer Used : DAR : Node Ref = 16777698 : Request Code = 1 : Result code = 0
2008-03-27 15:50:14 CET - Internal Dispatch, API: dsDoDirNodeAuth(), PasswordServer Used : DAC : Node Ref = 16777698 : User Name = 0x47a1d9e9390714bd0000005e0000005e,1024 35 1171980931692576885169214171482044657316089548207646087439857899663093596090086 18500022930664585710028775071071758117055259084909099653496495460064998013214753 57636678646248863040314133862180622725241725977528845328297304507793332329161400 1203839046263891507134157771344760551355337344094111692136608729188419 [email protected] : Auth Method = dsAuthMethodStandard:dsAuthNodeNativeCanUseClearText : Auth Only Flag = 1 : Continue Data = 0
2008-03-27 15:50:14 CET - CPSPlugIn::DoAuthentication
2008-03-27 15:50:14 CET - PasswordServer PlugIn: Attempting use of authentication method dsAuthMethodStandard:dsAuthNodeNativeCanUseClearText
2008-03-27 15:50:14 CET - GetAuthMethodConstant siResult=0, uiAuthMethod=1228, mech=
2008-03-27 15:50:14 CET - hexHash=25DDD5DED1651A0CCEB1E2B99DD09FFB
2008-03-27 15:50:14 CET - HandleFirstContact
2008-03-27 15:50:18 CET - CLDAPNode: Status Node: venere.marinarinaldi.it -- Server: 192.168.236.12 - Time: 30 sec -- Idle
2008-03-27 15:50:44 CET - CPSPlugIn::DoAuthentication returning -14102
2008-03-27 15:50:44 CET - Internal Dispatch, API: dsDoDirNodeAuth(), PasswordServer Used : DAR : Node Ref = 16777698 : Result code = -14102
2008-03-27 15:50:44 CET - Plug-in call "dsDoDirNodeAuth()" failed with error = -14102.
2008-03-27 15:50:44 CET - Port: 0 Call: dsDoDirNodeAuth() == -14102
2008-03-27 15:50:44 CET - Internal Dispatch, API: dsDoDirNodeAuth(), LDAPv3 Used : DAR : Node Ref = 16777696 : Result code = -14102
2008-03-27 15:50:44 CET - Plug-in call "dsDoDirNodeAuth()" failed with error = -14102.
2008-03-27 15:50:44 CET - Port: 0 Call: dsDoDirNodeAuth() == -14102
Maybe you are looking for
-
Outlook is syncing sporadically
I manage the cell phones and Blackberries for the company that I work for. There are 3 of my Blackberry users (that I know of) that are having problems with their Verizon Tour 9630 syncing correctly with their Outlook. Some messages that have been re
-
Button not working when using JumpTo Captivate 8
I seem to be having a problem when using smart objects as buttons, I select use as button, select jumpto and select the slide , in this case home, I have named the home slide home, but when previewing the button doesn't work, this is pretty basic and
-
How to make paging in JSP?
I would like to know how to make paging in JSP? PLEASE HELP ME !
-
hi i have a question that was asked to me what pattern does log4j appender(consoleappender,rollingfileappender etc) implement? candidates can be dao, facade etc.... can somebody xplain what pattern does it use and how techy
-
International Transfer scenarios to US ( Management of Global Employees)
What's the best way to handle Actions-MASSN for International transfers to US ? My client is a global company and every month there are 3-4 International transfers (not expatriates) to US from all over the world. Right now we terminate the employee i