10.5 clients on 10.4.11 server (searching disabled)

We don't have an administrator & I'm charged with fixing this, so type slowly.;)
Since upgrading everyone to 10.5+, we've lost the ability to search the shared folders on our server. We're also having some read & write issues.
From the server side, under Workgroup Manager/Share Points/General, "share this item..." is checked. Under Access– Owner, Group and Everyone are all set to "Reade and Write".
Under Protocals/Apple File Settings - "Share this item..", "Allow AFP guest..." and "Inherit permissions..." are each checked.
This all worked fine while the clients were under 10.4.
From 10.5.6, using "get info" on the shared folders (which are all in the "Shared" folder on the server), the "Sharing & Permissions" says "You have custom access" and says admin has Read & Write capability, but everyone has No Access. It appears that I can use the menu to change "everyone" to Read & Write, but it doesn't change. It goes back to No Access.
So I can't search these folders from the client and some files can't be moved.
Any ideas? Thanks! - j

I am having a similar problem.
I just updated clients to Leopard.
Xserve is still running Tiger.
Now clients cannot search files on the server.
Apple support said Tiger clients used "cat search" instead of spotlight.
Now that clients are Leopard, clients try to search with spotlight,
but Tiger Server cannot search with spotlight.
He suggested looking for a 3rd party cat search for Leopard clients.
Any suggestions?

Similar Messages

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Oracle 8i Client running on Windows 2000 Server

Hi,
I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
I have problems with connectivity.
When I do tnsping <service name>, I am geting the followiing
error:
C:\>tnsping <Instance name>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
02 16:37:01
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
Can any one help me out
Thanks
mka

Hi,
I have Oracle 8i Client running on Windows 2000 Server. I need to connect to Oracle 8i Server running on Sun Box.
I have problems with connectivity.
When I do tnsping <service name>, I am geting the followiing
error:
C:\>tnsping <Instance name>
TNS Ping Utility for 32-bit Windows: Version 8.1.7.0.0 - Production on 04-FEB-20
02 16:37:01
(c) Copyright 1997 Oracle Corporation. All rights reserved.
Attempting to contact (ADDRESS=(PROTOCOL=TCP)(HOST=<IP Address>)(PORT=1521)) TNS-12541: TNS:no listener
Can any one help me out
Thanks
mka

Disappearing folders created by 10.8 client on 10.5.8 server

I have a bizarre problem where a client (running 10.8.n) creates folders on a 10.5.8 server which then disappear for that client. All other clients (running 10.5.n to 10.6.n) on network can see these folders and access them yet the creator cannot. Can anyone shed some light on this please? Thanks Rob

Thanks for your help. I was not on-site when I made the inquiry. It turns out that the Mac client was connecting to the server via an SMB share. This was the root of the problem.

Java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Failure in SDOSerializer.deserialize

Hi All,
I am getting this exception while invoking one of our service from EM. Any pointers will be very helpful.
java.lang.Exception: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Failure in SDOSerializer.deserialize. at oracle.sysman.emas.model.wsmgt.WSTestModel.invokeOperation(WSTestModel.java:813) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:385) at oracle.sysman.emas.view.wsmgt.WSView.invokeOperation(WSView.java:303) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sun.el.parser.AstValue.invoke(AstValue.java:187) at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:297) at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53) at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1491) at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:111) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:384) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:114) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:101) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:111) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:384) at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:114) at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:95) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:972) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:439) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:219) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:102) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:211) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:131) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:181) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:183) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:419) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:61) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3739) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3705) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2282) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2181) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1491) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221) Caused by: oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : Failure in SDOSerializer.deserialize. at oracle.sysman.emSDK.webservices.wsdlapi.dispatch.DispatchUtil.invoke(DispatchUtil.java:362) at oracle.sysman.emSDK.webservices.wsdlparser.OperationInfoImpl.invokeWithDispatch(OperationInfoImpl.java:1004) at

Hi,
its JDeveloper and ADF on this forum. For EM related questions, you should try the EM forum
Frank

How to make Client instantly recieve msg from Server

Hello! I'm trying to make a multiplayer game via Bluetooth (RFCOMM protocol) in J2ME. I already managed to detect devices both as a client and as a server. I also managed to send real-time message from client(s) to server in the following way:
// Pauses thread until Transmission occurs
StreamConnection conn = notifier.acceptAndOpen();
read_msg(conn); //this is the function which reads the date received from client
But when I try the above as a client I got some exception, but never mind actually.
Here is the actual problem:
I want to be able to send a message from server to client whenever I press a key so that the client instantly receives that message.
Now the only thing that comes to my mind is to periodically check (i.e. every 50 ms) StreamConnection and watch for some changes like this.
while(true) {
InputStream input = conn.openInputStream(); // conn is of type StreamConnection
//now I check if the messege received is the new one OR have I actually received a message
// here I pause the Thread for i.e. 60 ms
But that would be extremely CPU heavy and foolish, wouldn't it?
So is there a smart way to register when client gets a message from server?
Please give me some example for client side.
Edited by: leden on Sep 27, 2007 3:07 PM

One more question.
I have a server and many clients. Let's say I had already received the first message from every client with this piece of code:
for(int current_client = 0; current_client < MAX_CLIENTS; ++current_client) {
//notifier is of type StreamConnectionNotifier
StreamConnection conn = notifier.acceptAndOpen(); //wait for transmission to occur
String response = read_msg(conn); //read_msg actually reads the message
Now, at some other moment I want to send a message to one of the clients .
How could I do that?
Do I have to add this command in the for loop above, perhaps?:
conn_client[current_client] = conn;
then simply reply by doing:
OutputStream output = conn_list[who_I_want_to_send_msg_to].openOutputStream();
and then the code like in my first post
OR this whole procedure is totally wrong?
Please explaim me what does openOutputStream() actually do?
Edited by: leden on Sep 30, 2007 8:51 AM

Oracle 8i Windows Client and 9i Unix Database server

Is it recommended to use Oracle Windows 8i client against Oracle 9i Database server?
Does anyone have an official Oracle link about this?
Thanks
Dipak

Only by putting an Oracle 8 database between them... You can set up an Oracle 8 database with a dblink to the Oracle 7 database and connect to that via an Oracle 9 client. Not pretty and not particularly efficient, but it'll work in a pinch.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Can I find out how many clients are connected to a server process?

Hi, I am hoping I can find out how many clients are connected to a server process. This could be either a programmatic lookout number, a number in a log file etc.
By the way, does lookout have any application (not data) logs? I have noticed that occasionally lookout will crash and I cannot find any logs to determine why, what processes were running, who last accessed it etc.
Thanks

Hello,
There's currently no way to acquire this data. I think that'd be a great suggestion for the product. Please submit your feedback to our developers at the following link: http://digital.ni.com/applications/psc.nsf/default?OpenForm&temp1=&node=
Best regards,
Yusuf C
Application Engineer
National Instruments

Client Install Fails: Log: ClientIdManagerStartup - Server rejected registration request: 3

Trying to install the client onto Windows Server 2008 R2 Servers using ConfigMgr 2012R2. no PKI is being used. We do not see this issue on any workstations, only servers.
It returns the following:
Got registration response from MP. Client approval status: -1
[RegTask] - Server rejected registration request: 3 ClientIDManagerStartup
Actions taken based on other Articles:
1.Delete the c:\windows\smscfg.ini file
2) Run CCMDELCERT on the client
3) Restart the SMS agent Host service.
Result: FAILED, it comes back with the same errors.
MP_RegistrationManager.log shows:
MP Reg: Client in-band certificate is not valid due to failures in certificate chain validation, Raising status event. Failure HR = 0x800b010a, In-band Cert SubjectName = Servername - SERVER
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of MpEvent_CertInvalidChain
ClientID = "GUID:D32A0A76-E832-49B6-A431-084DB435FD83";
DateTime = "20140520175614.768000+000";
MachineName = "Servername.tes.name.com";
ProcessID = 3444;
SiteCode = "XYZ";
SubjectName = "Servername - SERVER";
ThreadID = 17368;
Win32ErrorCode = 2148204810;
MP Reg: Registration request body is invalid.
Any other ideas out there???
David Baur

Do the following to check the SMS self-signed certificates
Start MMC.exe
Add/Remove Snapin -> Select Certificates -> Select local computer
Locate the SMS folder
Find the SMS Signing certificate and SMS Encryption Cerrtificate - check if they have expired. If they have expired - delete them.
Retry client installation

None of the authentication methods supported by this client are supported by your server.

Dear Exchange Admin
We have implemented exchange server .
MAPI profile configuration in outlook is working fine.but when we try to configure POP3 in outlook ,without SMTP authentication it is fine.
But when we enable SMTP authentication ,it is getting the following error
"None of the authentication methods supported by this client are supported by your server.
Kindly help
Ashraf

This worked for me today, as I had the same issue.
I had to set encryption to TLS to get it to work, and the server names as yahoo.co.uk...
In Outlook 2013, click File | Add Account.
Select Manual setup or additional server types.
Click Next.
Select POP.
Click Next.
On the “Account Settings” page, enter your account settings:
Your Name: The name you want to show when you send email.
Email address: Your full Yahoo email address.
Account Type: POP3
Incoming Mail Server: pop.mail.yahoo.com
Outgoing Mail Server: smtp.mail.yahoo.com
User Name: Your Yahoo ID.
Password: Your Yahoo account password.
Leave the “Require logon using Secure Password Authentication” option unchecked.
Click More Settings.
Click the Outgoing Server tab.
Select the My outgoing server (SMTP) requires authentication box.
Click Use same settings as my incoming mail server.
Click the Advanced tab. Enter advanced information:
Incoming server (POP3) port: 995
Select This server requires an encrypted connection (SSL).
Outgoing server (SMTP) port: 465, 587, or 25
Set the encryption type to SSL or TLS
Set your desired server timeout and delivery options.
- We recommend leaving a copy of messages on the server.
Click OK.
Restart Outlook.
Click Send/Receive All Folders.
You can now retrieve emails from your Yahoo Mail account in Outlook 2013.

SCCM 2012 client push occurs from site server or from distribution point?

I would like to set up client push in SCCM 2012 and I have a remote site with about 80 workstations that I would like to deploy the clients to using client push, but this remote site is VERY slow, as in less than 3Mbps slow. There is a remote DP located
at this site and I wanted to know if the remote workstations will be hammering my Site Server across the WAN (or MP I guess since the MP role is i installed on the Site Server) to request the client installation, or do the clients just request the client from
the Site Server or MP and then the client downloads to the remote DP and then the workstations install the SCCM 2012 client from the local DP at the remote site?
I just do NOT want the WAN link to become overwhelmed with workstation requests to install the client and have the Site Server have to respond to each and every workstation and download the SCCM 2012 client to each system over this slow WAN link.
How does the client push process actually work?
Thank you

The initial files will come from the primary site server. The rest (the biggest part) will come of the distribution point. See for a good read (even though it's more about secondary sites), this post of Jason:
http://blog.configmgrftw.com/secondary-sites-and-boundary-groups/
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Client Installation on DMZ workgroup server

Hi,
Please let me know how the DMZ workgroup client communicate with SCCM 2012 server which is in domain.
Also what client installation properties we need to mentioned while manully installing the client on DMZ workgroup server.
Whether PKI certificate will required for authentication?
I thing only http 80 port will required for communication, please correct if I am wrong.
Please suggest.
Regards
Parag

A client in a workgroup and / or dmz has the same port requirements as any other client. For a complete list see:
http://technet.microsoft.com/en-us/library/hh427328.aspx;
For some guidance on installing a client on a workgroup server see:
http://technet.microsoft.com/en-us/library/gg712298.aspx;
It's not a ConfigMgr requirement that a client in a workgroup requires a PKI certificate.
The key is that the clients in the dmz can communicate and resolve the management point.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Why client is downloading update from server while installing sccm client.

Dear team,
Can anybody give answer to my question?
I am new to sccm so when I am installing any client software the ccmsetup.log file is showing connecting to the server for downloading updates and it's taking long time to downloading because the office network is very slow 512kbps.But my setup file size
is 111MB then what updates are downloading from server and is it possible to put that updates in the offline setup.

You can copy the installer from the SCCM client installers from the SCCM server to the local machine.
Refer to the below for the switches for installation.
Use the switch /source:<Path>
to specify the location of the folder for the installers you copied earlir.
http://technet.microsoft.com/en-us/library/bb680980.aspx
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway

Building a simple J2ME chat client (for own J2SE-based server) Threading Qs

Hi!
I am making my own simple chat / messenger service to use between a couple of friends over GPRS.
On the server side i have made a multi threaded TCP server that opens a new thread for each connecting client and stores these socket connections in a hashtable for access to send data between each thread.
So when a client logs on to the server, the server sends a printwriter message to all other clients informing them of what client connected, and the clients can put the username in its out-database. then the clients can send messages to each others using a simple, self build protocol.
All connection between clients/server happens over a simple printwriter on in/out streams.
Problem is: it works perfectly most of the time.... However, sometimes a message is mysteriously lost when transferred from the server to a client. Transfer from client to server works flawlessly. I am thinking that it might have something to do with the client side threading, or slow network transfer casuing a TCP read error.
Client structure is as following:
start-> Midlet class -> (press connect to server) -> new Client class (impl runnable) -> new thread(this) -> void run() sets up all connections and writers, waits in a while loop for messages from server and takes action according to message type. -> Button(send) uses output stream to send a message to server.
Do anyone have any suggestions on what I must consider when making a client that will simultaniously be able to listen for data from server as well as send data to server over 1 socket and slow mobile connection without causing any trouble?
More info can be provided if necessary.
Thank you!

Building a simple J2ME chat client (for own J2SE-based server)a. i would like to say that this is a bl00dy brilliant idea. i mean ~ its been done before but building one yourself is quite thrilling.
b. are u using java 4 or java 5. ?
sometimes a message is mysteriously lost when transferred from the server to a client. Transfer from client to server works flawlessly.are you using push registry to recieve incoming connections.
i recommend using a StreamConnectionNotifier connection instead of just a socket connection. you could send your data (xml/plain text) just like a stream (tcp ofcourse). if you want to know how to use a StreamConnectionNotifier connection, here's how
try{
// listen at local port 789
StreamConnectionNotifier notify = (StreamConnectionNotifier) Connector.open(http://:789);
// infinite loop to get incoming connections
for(;;)
StreamConnection stream = notify.acceptandOpen(); // return a stream connection when a connection is made
InputStrean mystream = stream.openInputStream();
while(mystream!=-1)
mystream.read();
....cheers

Why won't a Windows 7 client connect to my web server?

I've got 5 Mac clients that can connect to my Snow Leopard server. They use file sharing, iCal, and web services.
We're trying to put a Windows 7 client on the network to use just file sharing and web services. Unfortunately, I can't get the Windows client to connect to the server at all.
We're using an Airport Extreme as a local network router. All devices are successfully connecting to this device.
When I try to access web services on the server using the Windows 7 client, I get an error message that the server is inaccessible.
Anyone know what might be different about how the Windows device is accessing the server vs how the Mac devices are?

How are you trying to connect to it? Just typing in its web address in a browser?
Is your DNS configured correctly?

10.5 clients on 10.4.11 server (searching disabled)

Similar Messages

Maybe you are looking for