[10.5][CS3] Printing margens problem

Hi,
Does anynone have a solution for this problem:
When exporting a document to pdf, using correct settings, a correct PDF document is generated.
When printing the document, using the same correct settings like pagesize and bleedmargens etc, the file is processed using the page-size settings in the page setup dialog box and not the settings used in the main printing dialog box.
Example:
Document size: A3
Main printing dialog box page size: A3
Page setup diaglog box, paper size: A4
result: A4
Resetting the os x printing system has no effect ...
Does anyone have a solution ?
Thanx
Tim

Hi,
I would like to create a pdf-file of a A4 document, with additional space for center and bleed marks...
Exporting the file works perfectly.
When printing to our print-server the size settings of the main dialog box are ignored and overruled by the page setup box.
Other macs do not have the problem, so the print-server works fine...
Removing Indesign correctly and trashing any remaining preferece, and reinstalling does not work...
Anyone have any idea?
Thanx

Similar Messages

Printing problems with CS3- Prints dont match what is on screen

My prints dont match what i am seeing on the screen when using CS3. I am using windows xp and printing on a epson 7800. I never had this problem before i started using CS3. I have calibrated my monitor.
I have the standard version of CS3 not the extended.
I read a arctical that CS3 prints darker then what is on your screen. The solution if you have CS3 extended is to increase lightness just before printing, but what if you dont have the extended version, what do you do?
I couldnt find this topic on the forum here. I am sure others must have had this problem too. What is my solution?
Thanks in advance
KB

There are a bunch of things that can affect the difference between what you see on screen and what you get in print. It is not enough to just look at calibration. Calibration is a starting point. Here are some things that may affect your result:
* Your monitor type
* Your PC type (laptops may not be best for image correction)
* Your calibration device
* The lighting in the area you work in
* Choices made while calibrating
* Proper setup for using the ICC profile (e.g., you aren't running conflicting software)
* Proper color management setup
* Smart choice in color space / working space selection
* Sensible choices for any other color management changes (if any)
* Careful use of on screen proofing settings
* Sensible choice for color management in capture (on camera or with scanner)
* Smart use of color profiling
* Good choice of printing materials / inks (as applicable)
* Good choice of equipment for printing
* Proper maintenance of printing equipment
I'm probably missing a few there, but I'll work on it. The best scheme I think is to keep things as simple as possible. Especially if you are having trouble, eliminate variables. When you get things working as you expect, then you can try to get a little more fancy. However, every variable you add will come with drawbacks in one form or another. Freeagent seems to make some sense here...
Richard Lynch

Has Adobe fixed the cs3 print problem yet?

Please don't beat me up for failing to look for answers. I'm far from lazy. I've spent the last two days and nights trying to print out some portraits that came out too vertically elongated any way I printed.
I emailed nasty letters to Epson, feverishly searched the internet, only to discover on the internet that ADOBE PHOTOSHOP CS3 was the problem. Something about not being able to print non-square images proportionately. Squares print out perfectly.
I went back and studied the program. The problem? If you measure the rulers on the screen (thaaaat's right! Physically hold a ruler to the screen!) the side ruler comes up short, so compensates through the printer.
What did I do in the short time I had left? I calculated the fake measures and the real measures, resized the images so they are proportionatly squished and they printed out perfect.
Am I going to have to do squish my work every time I want to print something not square? And please don't tell me that upgrading to cs4 (or whatever) is the answer. I paid money for cs3 and should get what I paid for.
Thanks!

Apparently, your notebook has an option for the type of screen.
http://www.notebookreview.com/default.asp?newsID=3188
"The E1705 has two options for the screen, a 1440x900 WXGA+ matte screen or a 1920x1200 WUXGA glossy screen."
This is probably why you were able to use the 1920 x 1200 resolution setting.
Joel

CS2 vs CS3 printing to Epson 3800

In trying to diagnose a Photoshop/11880 printing problem, I made some test prints to an Epson 3800 from the same test file. Andrew Rodney's "printer test" image includes very smooth color gradations R > M > B > C > G > Y > R. This image was printed from PS CS2, PS CS3 and Lightroom to the Epson 3800 on Epson Premium Semigloss Photo paper using Epson's Pro38PSPP profile. The CS2 and Lightroom prints were identical. The transitions in the color gradations were very smooth. The CS3 print was very close in overall color balance, but the transitions in the gradations were not as smooth, or gradual, especially between magenta and blue, and between green and yellow. Shouldn't prints of the same file from CS2 and CS3, using the same profile, look identical? The on-screen soft proofs in CS2 and CS3 look identical, but the prints do not.
4 x 2.5 GHz PowerPC G5.
4.5 GB RAM.
OS X 10.4.11.
Photoshop CS2 9.0.2
Photoshop CS3 10.0.1.
Lightroom 1.2
Epson 3800, Driver Version 3.57
Direct USB connection.
Epson profiles are located in driver package (as installed).
Epson Semigloss Photo Paper 250.
Photoshop Manages Color, Epson Pro38PSPP profile.

Yes, all settings were the same. I got official word from Epson today there are problems with CS3. Epson, Apple and Adobe tech people are meeting in a few weeks to find a solution. In the meantime, all printing from my Macs to the 3800 and 11880 will be from CS2 and Lightroom. Thanks for your input.

Placed QuarkXpress 7 eps into InDesign CS3 prints with slanted type

any suggestions to fix?

placed QuarkXpress 7 eps into InDesign CS3 prints with slanted type
The problem may be in the HP print drivers.
Printing to Epson printers works, printing to HP 132, 5000 or 2200 produces slanted type, even at Adobe.
Printing to disk as a Postscript printer and then printing the ps file using the pdf printer works fine.
Roger

Print Quality problems

My print quality for Reds & Greens is coming out streaked. The blacks and blues are fine. I use HP ink cartridges anad keep them cleaned and aligned. But on the Alignment page the reds & greens are streaked and cannot be cognized. Could this be a print head problem ?

Hello novemberwolf,
Welcome to the HP Forums.
I see that you are having some printing issues when attempting to print in colour.
Please click on the following link on Fixing Print Quality Problems for the HP Officejet Pro 8600 e-All-in-One Printer Series.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Print quality problems on Fuji Xerox printers when printing from ArchiCAD and/or Preview.

Hello,
We experience major print quality problems when printing directly from Graphisoft's ArchiCAD, Nemetscheks Vectorworks and from Apple's Preview.
Basically we see various artefacts on our printed drawings, e.g. line thicknesses change and hatched patterns / fills are reproduced with patches where the lineweights and clours change completely... which is not acceptable.
This affects the following Fuji Xerox printer models on both 10.6.x and 10.7.x with the latest FJX PPDs:
ApeosPort C5540I
Xerox LF6605 MF
The workarounds for us are to either print PDFs from Adobe Acrobat Reader or via the rather dated Accxess Tools, besides that we prefer at times to print directly from a given Software it is also not always possible to generate a PDF and print it from Acrobat Reader... especially since the latest Adobe Reader update to its print dialogue makes printing from it extremely tedious - in fact we are considering going back to 9.5.2
Obviously, we have approached FJX Tech Support and are awaiting a reply - however we are disappointed that this is happening on relatively new equipment and wonder if anybody else has already found a solution.

The symptoms you mention could be related to the FJX engine and Acrobat is masking this fault. To test, you can create a Postscript file from the print dialog of ArchiCAD or VectorWorks and then download this to the Apeos RIP. If this produces the same result as when using the printer driver from the applications, then it would indicate that the engine is not capable of handling the data being sent to it from these applications.

Print Cartridge Problem: Tricolor - HP Officejet J4680 All In One

I am seriously going to have an anxiety attack. I run a business from home & I HAVE to have a printer. I just spent $50 on new ink cartridges. My printer was working fine for the last week, and then tonight I have this error message:
Print cartridge problem: [Tri Color] . Refer to device documentation to troubleshoot
SO I reset the printer, shut it on and off, cleaned the cartridge and the printer, switched out the new cartridge with the old one ~ same problem. Over and over.
I called HP and they said that since my printer is out of warranty they can't help me unless I purchase a new warranty plan. What horrible customer service. This printer is a product of HP and I should be able to get help regardless of when the warranty expired.
This is so frustrating. If I can't get help, I think I would rather buy a new printer of a different brand instead of paying for a warranty after I just spent 50 bucks on ink. GRRR!

The page here has troubleshooting steps that may resolve your issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Windows 8/8.1: Printer Offline Problems

Windows 8/8.1: Printer Offline Problems
Are you getting an error that your network or wireless printer is offline when you try to print?
When you print to your network printer, does it fail, and when you check the printer status it says Offline?
Do you have problems printing to your wireless printer after your PC has been asleep?
If you answered YES to any of the above questions, then you have a problem with your network printer being offline. After some investigation into this problem, we recommend updating windows. Run Windows update to check that your version of Windows 8 is up to date.
There are a few windows updates that may help with this problem
1) Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
2) Install this Microsoft patch for the WSD service. http://support.microsoft.com/kb/3000461
If this does not help, then please follow the steps list below which will give you a Workaround that may help with this problem.
Assign the printer a static IP address
An IP address is an Internet network address that the computer can use to communicate with the printer. Enter a static IP address to make sure that the wireless connection remains stable. Follow these steps to assign the printer a static IP address.
Get the printer IP address.
Press the Wireless button on the printer control panel to view the network settings.
Access the Network menu on the printer control panel.
Print a Network Configuration Page or Wireless Test Report page.
Once you have the printer's IP address, open a new web browser window or tab.
Type the IP address in your web browser's address bar, and then press Enter.
Make sure that you type the IP address into the browser's address box. If you type it into a tool bar search box, the EWS will not open.
If the message 'There is a problem with this website's security certificate' appears in the web browser when you try to open the embedded web server (EWS), or when you navigate within the EWS, click ' Continue to this website (not recommended)'.
note:
Choosing 'Continue to this website (not recommended)' will not harm your computer while you navigate within the EWS for your printer. If you encounter this error outside of your printer's EWS, your computer could be at risk.
If the browser fails to open the EWS after you click 'Continue to this website (not recommended)', refresh the browser window.
The Embedded Web Server (EWS) for the printer opens and confirms that the printer is on the same network as the computer.
In the EWS, click the Network tab.
In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.
Click Manual IP, and then click Suggest a Manual IP Address. A manual IP address, Subnet Mask, and Default Gateway displays.
After the manual IP address populates, click Manual DNS Server.
note:
Keep a record of the manual IP address for reference.
On the Network Configuration Page you printed earlier, locate the DNS Server addresses, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
If the DNS addresses are not listed on the Network Configuration Page, or if you have trouble accessing the network or Internet with the original DNS addresses, use one of the following methods to obtain DNS addresses.
Method one: Use publicly available DNS server addresses
Configure the printer using publicly available DNS server addresses. To find available DNS server addresses, search online for 'public DNS servers'.
After you find public DNS server addresses, type the addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Method two: Get the network DNS information via your computer
Select your operating system, and then use the following directions to obtain the DNS server addresses.
Right-click the Start button () or the lower left corner of the screen, click Run, type cmd, and then press Enter.
When the command window opens, type ipconfig /all, and then press Enter. Information about the computer's network displays.
Scroll to and locate the DNS Server addresses.
In the EWS, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Print a test page to make sure that the printer's IP address is the same as you assigned.
Right-click the Start button () or the lower left corner of the screen, click Search, type HP and click your printer in the results. Click Utilities, and then click Update IP address to update the address in the software.
Adding a Wireless Network Printer using Control Panel
Go to Control Panel and choose Devices and Printers
Click on Add Printer
The PC will search the local network and display the network printers.
Choose the printer and select Next
The system will then try and auto select a compatible driver
Select the current driver and Click Next
The system will then ask for a name for the printer. The user can change the name and then click Next
The User can then choose to share the printer
The user can select to make this new printer the default and then click Finish.
The new printer is now setup but this printer may be using the In OS driver (Class) rather than the HP Full Function driver.
To change the printer to use the HP Full Function driver follow the following instructions. I would recommend changing the driver to the HP Full Function driver as the User can then use features such as Custom paper sizes.
Go back into Control Panel and choose devices and Printers, right click on the newly created printer and choose Printer Properties
Choose the Advanced Tab
Click on the driver section drop down and choose the Driver for the printer that does not have the words Class driver after it.
Click apply and then OK and the driver will be changed to the HP Full Function driver for the printer.
The user should try this configuration and see if they still experience problems.
Please Note:
DO NOT Remove the Original Printer Icon from Devices and Printers as the HP Printer Assistant will stop working.
JonW
I work for HP

I have the printer offline problem. It started when I ran out of toner. I have now installed a new toner cartridge.
Your solution does not help me because I have tried to install Win8.1 and it failed.
I would just reinstall my printer but I have a long list of items in my print queque and I don't want to lose them.
Is there another solution?
Or is there a way I can save the print queue?
Mike

Windows 7 - HP Laserjet 8500 print driver problem

I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network. The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS.
Can anyone please help me correct this problem?

Hi,
Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7. On the machines affected, try the procedure below to see if it helps at all
Next download revo uninstaller on the link below and install it.
http://www.revouninstaller.com/download-freeware-version.php
Disconnect the printer from the PC.
Run Revo and see if it finds any HP Printer Software installed. If it does, right click the software icon and select uninstall. During the process you may be asked to delete registry entries. If you are, just select all and click delete. Do the same for any left over files and folders. Once completed, reboot the PC.
Re-connect your printer to the PC and follow the guide below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
If this helps you will need to repeat the process on each of the affected machines.
Best wishes,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Officejet Pro L7590 Print Quality Problems - Black/Yellow Printhead

Officejt Pro L7590 All-In-One
Running on Windows 7 64 bit, USB connected to computer
Approx 2.5 yrs old; has printed 30,000 pages.
Issue: Black/Yellow printhead replaced about 500-1000 pages ago; new unit only tested as "Fair" in diagnostics, even though it was fresh outta the box. Print Quality good.
About two weeks ago, printer refused to print, flashing ambler "!", etc., error message regarding black/yellow printhead.
Ordered replacement ($71 again -- ouch! Whole printer only cost $199 30 months ago).Again, new unit only "fair" in diagnostic (original Cyan/Magenta printhead still reads as "good").
New printhead required much cleaning and aligning, and now prints with large gaps on a regular basis down the page. Talked to tech guy @ Staples where i bought it; his only "helpful" suggestion was that most people just toss the printers the first time the printheads go bad.
Print heads are separately warranted.
My questions:
(1) What else is there that's screwing up my print quality,a nd is it fixable?
(2) Can i get my $ back on the two printheads that didn't fix the printer's problems?

I've included a link below to help you troubleshoot rpint quality issues...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu03037&tmp_task=solveCategory&lc=en&dlc=en&cc=...
This document provides some system settings that may help fix the issue.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Printing quality problem with Photosmart D110

The printing quality is very bad after we changed the catridge. The printer keeps saying that there is catridge jam. But after I followed the steps by the printer, the problem is still unsolved. What is the possible reason and how could I solve it?

Hello RussellYang.
Welcome to the HP Forums! I understand your concerns with your Photosmart D110A. Does this issue occur from multiple program(s) or just one program?
Please follow this entire HP document on Continuous Pages of Strange or Garbled Characters Print in Windows.
What is your operating system on your computer? Click here to find out: Windows.
Have you tried using a different USB cord, to verify if the issue still occurs?
Please inform me your troubleshooting steps.
I worked on behalf of HP.

Deskjet 3520e all in one printer network problems

Hi All.
I have a brain teaser for the technical types out there hoping someone can shed some light on a weird sort of problem.
History: All has been fine with my g6 Pavillion latop 64bit W8 and 3520e all in one printer and working as always very well.
Oct 16th 2014 My broadband service went down and after many communictions with ISP eventualy received (Nov 4th) and installed a new "super hub modem".
OK so far, Managed to connect laptop via wireless router and connect to internet etc., however . . . I cannot get my printer to network as before, I can use it via USB port but if I try to network it, The Cyan ink cartridge reports as being broken or damaged even though 3/4 full and will not allow printing, but when connect via USB port the Cyan ink cartridge registers normal and will print as expected.
Has anyone else come across this problem?
If I go down the route of uninstalling and reinstallin the Printer software is there a set order in which to do so?
In the list of programs these four are shown. .
HP Deskjet 3520 series Basic Device Software
HP Deskjet 3520 series Help
HP Deskjet 3520 series Product Improvement Study
HP Deskjet 3520 series Setup Guide.
I would like very much to get back to network printing if at all possible.
The router IP address is 192.168.1.3
The printer IP address is 192.168.0.1
I have been led to believe that as the addresses are so close this shouldnt be the cause.
I must add that in the past I have had occasional printer software problems which I was unable to resolve without help from the technical centre and I would prefer not to restart the installation if at all possible.
Your comments would be appreciated.
Thanks in advance.
Un1corn.

Hi @Un1corn
What exactly happens when you try to convert from USB to Wireless and configure the printer to the Virgin Media Super Hub? Do you get an error message of some sort?
Maybe there is a firewall on the Super Hub. Do you have the model number for this device? I can look up some information to see what could be casing the issue.
In the meantime, running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Print selection problem

when i select a page to be print from my pc the page select in

Hello. I feel your pain and frustration with the print selection problem in safari, especially in Snow Leopard. I have spent hours trawling help pages and forums etc. BUT YEE HAA (sorry got a bit excited, but it really was hours) I found the answer. So here goes.
Click on Safari
Scroll down to services then slide to right
Scroll down to services preferences and click
Scroll down to the Text section
If you Tick the Text box it will choose all options for you. Or if you don't want all options in the Text list, then untick Text box and tick options you do want.
BUT for your print selection problem make sure you tick NEW TEXT EDIT WINDOW CONTAINING SELECTION.
Then when you want to select something in a web page you want to print (including pictures etc) then highlight it, then Right click. And low and behold, in the list is NEW TEXT EDIT WINDOW CONTAINING SELECTION. Click that, Then press cmd+p and your printing.
I really hope that helps with your problem
I can now go to sleep.

Any way to keep faxing/scanning after "Print-head problem"??

We've got a "Print-head has problem" message. Ordered new print-head (before seeing another poster's message saying "I did that twice and it didn't help!) but it won't arrive for several days. Meanwhile we'd love to still be able to use this alleged "all in one" to scan and fax.
Problem is, there doesn't seem to be a way to escape from the "print-head problem" message--none of the "cancel" or fax buttons will work. Cycling the power just recovers the same message again, and otherwise locked up.
I'm hoping some old hand at HP may actually read this and know the magic fix.
So the question: Is there any way to keep using the 7780's fax and/or scan functions after getting a "print-head has problem" message?
BTW, we've had several problems with the 7780 in the 3 years we've had it. Had to send one back, and the auto-feeder has been hit-and-miss. But we've been able to work thru the problems with HP support--though certainly at a high cost in our time. Then with the problems getting a new Windoze-7 computer to work with it (certainly not entirely HP's fault but your customers could have used some better planning for the thing), we're starting to look at other manufacturers.
If any HP managers or execs ever read these boards, you might keep in mind that a reputation, once lost, is extremely hard to recover.
In any event, any help greatly appreciated. Thanks.

Hey Kappy, While my network is the only one in my preferred list, it's not the only one that the airport "sees". When I click on the wireless signal strength icon in the upper right part of the menu, when connected to my network, it says at the top of the pop up list "Airport: Scanning". It then lists about 10 wireless networks that are in range.
What I want it to do is stop "scanning" for other networks and simply lock on to my network once connection has been established. Is there a way to do this do you know? Thanks, Dan

[10.5][CS3] Printing margens problem

Similar Messages

Maybe you are looking for