10.5 update has removed record enable

Hey ho,
I updated to logic pro 10.5 yesterday and record enable has diaspeared. Ive searched some older threads and went througt the sugested steps that fixed the problem for older Logic but they arent sorting out the 10.5 update. There is en empty space where the R button should be and ive also not got and input monitoring. I know its not my interface becaue it works in garageband. Ive been in preferences and the track header show/hide recoed enable but stiil no joy.
any other ideas?
cheers

Magic,
No.. that may not be the case..(Though of course, the update has triggered the problem)
It could well be the way the M-Audio devices (and Alesis's gear comes from the same source. as are a few other cheaper interfaces who 'use' the same basic design ideas.) were designed.. and the fact they 'die' under 10.0.5 could be a symptom of a design issue, which causes the issue when a library/routine in Logic 10.0.5 was changed or updated...
Otherwise many more audio devices would have have the same issue and that is plainly not the case....
It's easy to jump to the wrong conclusion.... but until the cause is fully understood, it's best to say, the reasons for this particular issue, are unknown at this time
It's also worth noting the audio devices having this issue, are also of the group that historically, tends to have issues when OS X and/or Logic is updated...whereas the audio devices that remain stable throughout, are not affected by this issue...
So... It may well be that a fix might have to be forthcoming from the makers of the audio devices affected and not from Apple themselves, if it's a design problem with the devices and/or their drivers..... which in the past has also been the case in similar situations with these particular audio interfaces.

Similar Messages

10.0.5 update has removed "record enable" button

Ever since the update I can no longer record any audio with my blue microphones yeti mic. The "record enable" button that is usually visible in the track header area has disappeared even when enabled in track header configuration. I have also messed with the audio preferences settings but cannot get the button to show up. Please help report this bug to apple using the following link!
https://www.apple.com/feedback/logic-pro.html
Thanks!

Update: Apparently both M-Audio and Alesis have gone 'missing in action' over this issue on the net/forums.. but here are the phone numbers to contact M-Audio support directly for anyone wishing to do so..
M-Audio USA & Canada
Phone: 401-658-5765
Hours: Monday - Friday 8:30AM - 6:30PM EST
M-Audio Germany
Phone: +49-2154-81299-20
Hours: Monday - Friday 9:00AM - 5:00PM CET
M-Audio UK
Phone: 44(0)1252-896040
Hours: Monday - Friday 9:00AM - 6:00PM BST
M-Audio Brazil
Phone: +5511 - 3222-6476
Hours: Monday - Friday 9:00AM - 6:00PM BRT

HT203167 yet again failed iTunes update has removed my purchased music

latest update has removed some of my purchased tunes update stalle part way!

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

E52 firmware update has removed very useful clock ...

When the E52 keypad was locked, I found out that pressing down on the multi directional key, the time was displayed white on black. So it was possible to see the time without unlocking the phone. This was particularly useful at night time. Now having install the latest firmware update to Software version 031.012 and Custom version 031.012.202.01 I now just get Press 'Unlock' to activate keypad.
Why has this been removed?
Is there some set up to get it back?
Was it a known feature previously?
Can the next firmware update please restore this feature.
Thanks
Tim

timst wrote:
When the E52 keypad was locked, I found out that pressing down on the multi directional key, the time was displayed white on black. So it was possible to see the time without unlocking the phone. This was particularly useful at night time. Now having install the latest firmware update to Software version 031.012 and Custom version 031.012.202.01 I now just get Press 'Unlock' to activate keypad.
Why has this been removed?
Is there some set up to get it back?
Was it a known feature previously?
Can the next firmware update please restore this feature.
Thanks
Tim
Reset the E52. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

When-Remove-Record, does not update header field

i have master-detail form and in that there is a DB field eh_amount, which takes it value from
the computed non-db summary field m_amount
my E_head
eh_code
eh_no
eh_amount
my E_detail (tabular with 5 records displayed)
ed_eh_code
ed_eh_no
ed_amount
m_amount <---summary column (summing ed_amount)
whenever i enter/update ed_amount , m_amount get computed properly.
i have WVI trigger written where i store eh_amount := m_amount
i have also written When-remove-record on e_datail block, where i again re-initialize
eh_amount := m_amount
the detail record gets deleted and m_amount gets updated,
but the header eh_amount does not show the updated value of m_amount.
Kindly suggest to me as to where the change has to happen.

Hi Craig..
I am using form6i, db 10g.
I am not doing summation myself. My m_amount field is calculated field set at design time.
Summary detail block is E_detail and summary field is ed_amount.
Only after saving form, the new value for eh_amount is seen.
what i want is eh_amount should be seen updated, if while entering i delete any detail record.
in when-remove-record i am storing m_amount in eh_amount, but the new value of eh_amount
is visible only after saving the form and not when any record is deleted.

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button. What's wrong?

I have a m-audio producer usb microphone and since the update on Dec. 22, 2013 Logic hasn't been allowing me to record with it. Logic is reading the microphone as the input but the audio tracks don't have the record enable button and won't let me select an input for the audio track on the inspector panel. What are some possible solutions.

Certain M-Audio USB devices (along with some other USB2 class compliant devices that don't use drivers) no longer work with Logic Pro X 10.0.5
At this time it is unknown as to why this has happened. Nor is it known if Apple will need to fix it or if it is up to the Developers of said USB2 devices to remedy the problem.
In the mean time, assuming you made/could make backups prior to updating to 10.0.5.... the solution is to roll back to LPX 10.0.4...

HT5559 Oracle has updated java 7 to update 13. Re-enabling java 6 failed

Oracle has updated java 7 to update 13. Re-enabling java 6 cannot be completed with mentioned commands in artikel HR5559. Can anybody help me?

William Lloyd wrote:
You need to run Java 7 at this point, as Java 6 has been disabled due to security risks and there's no current version available that will run on 10.8.
That's not true. If you already have Java SE 6 installed it will run Lion and Mountain Lion. The latest update was provided last Tuesday Java for OS X 2013-001.
The update disables the Java 6 applet plug-in, but does not destroy it. It can be re-enabled using Apple instructions: "Java for OS X 2013-001: How to re-enable the Apple-provided Java SE 6 applet plug-in and Web Start functionality".
@eoever,
The instructions you cited has worked for many others, so I'm not certain why it isn't working for you. Did you previously have Java SE 6 installed and did you update it with 2013-001?

When downloading updates for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed.

When downloading updated for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed. If I don't get that message I get a message saying that the download was unsuccesful and that in order to download I need to go to tools and then select dowload only. Please help I really want to update my iphone!

Thanks for helping out, but I already tried these steps.
I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
So, it turns out that a broken battery can cause this behaviour.
But thanks again

While Checking In " Cannot remove record because it has links"

Hi All,
We have an scenario while checking In MDM records in Data manager showing the following error " Cannot remove record because it has links".
There are 2 main tables Table A and B, both are look up main to each other.
Record 1 from Table A is linked with 5 records in Table B and one of the record from Table B is linked to Record 1 of Table A
All the Records from Table B is checked In. Now am Check-out Record 1 from Table A and trying to Check-In back, while performing the same am getting the following error " Cannot remove record because it has links".
Is this work as per the Look up main design or am I missing anything. Help appreciated.
thanks,
<ar>

Hi Alex,
Before removing record you need to remove links for those records. By this I mean you must have a field in Table A which is lookup to Table B and vice-versa. So firstly delete this field value which is a sort of relationship between these two tables and afterward only try to delete/remove record.
Regards,
Mandeep Saini

HT1923 I cant update or remove itunes without receiving the message: the install source (itunes.msi) for this product is not available. verify that the source exist and that you can access it. Has anyone had this problem? Thanks

I cant update or remove itunes without receiving the message: the install source (itunes.msi) for this product is not available. verify that the source exist and that you can access it. Has anyone had this problem? Thanks

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

ICloud update 3.0.1 40 has removed my sync buttons in Outlook 2007. I run it as admin but the add in is "unloaded" and will not install :-(

I am about to get a nervous break down from this. FINALLY I got my 2 iP5 and my 2 Win7/Outlook 2007 PC's to work and sync together. This latest update did remove that add in and it's impossible to install / load it. Tried as an admin but of course no result. I hate this so much that I am glad I don't meet any of you Microsoft or Apple guys who produce this updates. WHY NOT DO A BETTER JOB?

I have now got my "buttons" back ("Refresh iCloud" & "Notifications"), but in spite of that my shared calendar does not sync the events I insert in my PC Outlook 2007 to my other 3 devices.
Events between my 2 iPhones (iP5/OS 7.0.4) work fine, even with my other Win7 PC.
All was fine until I updated my iCloud a week ago... :-(
I have now - as an admin in Outlook - under Tools/Trust Center/Add ins activated the iCloud Add-in, so it is not any longer Deactivated (?)
Under Help / Outlook 2007 - under Disabled Items the add-in is now removed. It was there even after it had been removed from the Trust Centers Disabled Items..
This is honestly the most stupid way of using nice time (thank god it's raining today and my golf was cancelled.. )

Record enable button not showing up in logic pro x?

it is checked under the "configure track header" box and even has a blank space for it ("input monitoring" button is slid to the right), but is invisible. checking and unchecking "record enable" slides the "input monitoring" button right and left. this isn't an issue with the built-in mic on my comp but does become an issue with my m-audio fast track. i have the fast track set as the input and output and can hear the microphone through the monitoring (although i don't think any added effects are present in the microhpone monitoring). it just cannot record. what? is this a driver issue or something? logic displays the interface correctly with the name and everything. thanks for any help.

Look at all the posts in the forum from users with similar problems, it happened with the last Logic update.

Slicers Removed from Template: "Removed Records: Slicer Cache from /xl/slicerCaches/slicerCache3.xml part (Slicer Cache)"

Product: Microsoft Office Professional Plus 2010
I have created a template file with a data table, 2 pivot tables, and each of those 2 pivot tables has a pivotchart and 2 slicers. I have some code that updates the pivot table ranges. When that occurs the pivot tables, pivotcharts and slicers
all update successfully.
The problem comes after saving the .xlsm file. Upon opening the file I receive a message saying "Excel found unreadable content in 'myTemplate.xlsm'. Do you want to recover the contents of this workbook? If you trus the source of this workbook,
click Yes."
I then get a list or removed records and the repair that was done.
Removed Records: Slicer Cache from /xl/slicerCaches/slicerCache3.xml part (Slicer Cache)
Removed Records: Slicer Cache from /xl/slicerCaches/slicerCache4.xml part (Slicer Cache)
Removed Records: Slicers from /xl/slicers/slicer2.xml part (Slicer)
Removed Records: Drawing from /xl/drawings/drawing4.xml part (Drawing shape)
Repaired Records: Named range from /xl/workbook.xml part (Workbook)
Most of the file is OK with the exception of my last worksheet. The pivot table and chart get updated, but the slicers are gone. Any idea why this is happening? Can something be done to prevent this?
Thanks,
Rich

Hi Rich,
Based on your description, my understanding is that slicers are removed after you get the error messages and repair it. You wonder to know why slicers are lost after repairing, it seems that the corrupted file caused the issue.
Please try to update the pivot table ranges manually without macros. According to my test, the slicers won’t be lost without macros. Please test this method in your own environment. If it
works fine after disable macros, please check your code.
If my understanding is incorrect, could you upload a sample via OneDrive and be at bit more precise explain your problem, so that we can get more accurate solutions to this problem. I am glad to help and forward to your reply.
Hope it’s helpful.
Regards,

Record enable button disappeared Logic Pro X

I have been using Logic Pro X for several months without any problems but now the Record Enable Button has disappeared.
There is a space where it should be. If I choose "Hide Record Enable" the space disappears, but choosing "Show Record Enable" results in only a blank space where R used to be.
I have checked my hardware settings and my audio input appears like it should.
The problem is not appearing on my MacBook so I tried creating a new file and importing it to my desdtop Mac (Mini), but when I did this the Record Enable button promptly disappeared.

Well, yes.. but thats how you are meant to assign/select an Audio device in every version of Logic... going back several major versions now. You had to have done that in Logic Pro 8 or 9 in the past.. You probably just forgot you had to do so initially.
Anyhow...
The problem described in this thread was caused by incompatible drivers and a change made to LPX during an update...
...and was not caused by the OP failing to select the Audio interface correctly in audio prefs in the first place...
Cheers..
Nigel

Tax classification codes being updated to inactive record

I tried manually update the tax amount which calculated by system,but the system rejected it and now hold all further actions until it is re-process/ re-validate and, yet I am not able to re-process or revalidate. I am getting an error box prompting the system was unable to generate distribution due to tax classification code getting updated to inactive record in HZ_Cust_Site_Uses_All. I am on ver 12g.
Has anyone encountered such problems? and do anyone know what can be done to fix it

I'm not a functional expert but I would suggest reviewing the following docs and see if it helps.
How To Update EBusiness Tax Lookup Codes? (Doc ID 466578.1)
Payables - Invoices - Invoice Lines Tax Classification LOV duplicating entries (Doc ID 1265315.1)
Upgraded Tax Classification Codes Not Enabled For Iexpenses (Doc ID 851607.1)
Thanks,
Hussein

10.5 update has removed record enable

Similar Messages

Maybe you are looking for