10.5 will not boot after install

I did an upgrade install of 10.5 on my old tower. It said the install was complete and it needed to restart. I restarted and the apple logo screen came up. After several seconds the machine just shut down. Subsequent attempts to boot from this disk caused the same shut down. This system seems to ignore the keyboard so I couldn't boot from the dvd. I finally pulled the wire on disk with the 10.5 system, restarted and let the machine find another disk with 10.3 and that booted fine. Access to the disk with 10.5 seems fine. Anyone have any suggestions.

Reset the SMC for an intel based Mac or the PMU for a powerPC based Mac: Go to the main Support page here and search for "reset SMC" or "reset PMU" in the search field at the top LEFT of that page. In the list of Knowledge Base articles returned, find the instructions specific to your model of Mac. The final instruction will be to boot up normally, but instead, do the following:
Reset PRAM (which may help get your keyboard functional again): Shut down the computer, reboot while holding the 4 keys Apple-Option-P-R until you hear the SECOND startup chime, then release them. Your computer should continue to boot up normally. If it does, do NOT log in. Just shut down again.
Now try to boot once in Safe Mode: Boot while holding the "shift" key until you see the spinning gear on the gray Apple screen. A Safe Mode boot does various maintenance steps in the background. Be patient, this will take a while. You should, eventually, get to a log in window with the notation that you are booted in Safe Mode. Once again, do NOT log in. Just shut down again.
Now see if you can boot from your Leopard install DVD directly. Do this by holding the "option" key as you boot up. An "option" boot sometimes works even when the normal "c" boot doesn't. If the DVD is not already inserted, insert it shortly after pressing and releasing the power button. An "option" boot causes the system to go look for discs to boot from. This takes a while. When the cursor turns back into an arrow you should see your DVD in the list. Select the DVD and then click on the right arrow to the right of the list.
Presuming you can boot up in the install DVD, select your language when asked, and then, when you get to the screen where you would normally start an install, INSTEAD run Disk Utility from the menu bar. Select the line showing the name of your main hard drive in the column on the left. Now click on Repair Disk in the panel on the right. Presuming that completes normally now also do a Repair Disk Permissions in the panel on the right.
The next step would be to Quit out of Disk Utility and the Installer, selecting your main hard drive as the disk to boot from, and then Restart. But before you do so, read this Apple trouble-shooting article and see if any of the fixes they list here might apply to you -- in particular, if you have the DivX stuff they talk about needing to remove:
http://docs.info.apple.com/article.html?artnum=307005
--Bob

Similar Messages

  • Brand New 27" iMac i5 will not boot after installing software updates

    I just purchased my new iMac 2 nights ago. I have been getting it setup with my apps, mobile me account, etc, and luckily just setup time machine and let it do a full backup.
    I just ran Software Update for the first time, and now the machine will not boot. It hangs on the grey screen for about 1 minute before the Apple logo comes up. About 30 seconds after the Apple logo comes up, the grey spinning gear shows up, and about 1 minute after that I get the grey screen of death (You must restart your computer).
    Any suggestions? A little frustrated here....

    If you mean did I receive error messages, No, I didn't. However, the desktop reverted to the default purple night-sky looking thing, my applications and such all disappeared from the dock, and I couldn't open any files or folders (you don't have permission to ...), etc. I tried signing out and back in, rebooting, using a second admin account on the computer, creating a new admin account, etc. I ran Disk Utility, hardware checker, etc. No errors were found, and nothing changed. I could see all my files and folders, but they had a small red circle in the corner, indicating "locked" or "no permission".
    I'll find the lines from the console log if that will help. The error showed up immediately and is in the computer's attempt to access the user/library/application support/sync services and same path to user/library/logs/sync services/log. (or something reasonably close to this. If you can use the exact path, I will get it) The link between my settings and files, and a password is apparently corrupted or something, so that the computer won't even let me change the desktop or any file, so I can't save, edit or discard anything, and can't drag files to another computer on the home network.
    At least I'm still under the 90 day warranty, so I can call tomorrow. At this point, the SMART check says the drive is good, so I assume it's software. The only things new are the three auto Apple software updates I installed yesterday, so I immediately suspect them. But who knows?
    Does this help you at all?

  • Windows 8.1 Pro will not boot after installing iTunes 11.1.5.5

    It's a little hard for me to accept that this is true, but the symptoms seem to be pointing the direction of the title of this thread.  I have an all-in-one touch-screen Gateway computer that came with windows 7 (yeah, a win7 machine that came with touch, yeesh) and I put windows 8.1 pro 64-bit on it with a clean install (actually windows 8 was the clean install and then I did the free microsoft store upgrade to 8.1).  It has 4GB of RAM and has a Pentium Dual Core cpu @ 2.2 Ghz.  It was running fine with the previous version of iTunes, but as soon as I updated to iTunes 11.1.5.5 (and there may have been other apple things that updated too (ie quicktime of course), the computer prompted me for a reboot and froze during the reboot process (before it even shut down).  Then it had trouble booting into windows.  I ran startup repair to no avail and decided to do a sytem restore.  My most recent restore point was from a few weeks back, before iTunes was even installed at all on the machine.  I went back to that point and the machine worked fine again.  Then I installed iTunes 11.1.5.5 and the same exact problem occurred - it froze while shutting down after the iTunes install and then would not boot into windows 8.  I did another system restore and have not put iTunes back on.  The system is working fine.  I'm going to try to find out if there's a way to download older versions of iTunes, so that I can install it, but the bigger issue here is: Is this a legitimate bug/incompatibility with some hardware or software or driver that I have on this computer?  I run a computer support business so I know my way around but I don't have time to troubleshoot this from scratch.  Anyone else seeing this?  Apple employees...a little help here?  Any input?

    let it sit for about 30 min and still got nothing
    I then did a "hard shutdown(just pressed power button till it turned off the computer)"
    That may not have been long enough.  But a "hard shutdown" would definitely have been construed as a problem due to the update.
    Asus apparently is a known problem case...
    http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
    Link courtesy Darrell Gorter [MSFT] found here
    "Windows 8 Keyboard and mouse not working"
    http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
    (RSS given to avoid overhead of opening long thread for IE users)
    Note that there may be useful tips for you in both of those threads' comments.
    Robert Aldwinckle

  • Windows 8 will not boot - After install virtual box (virtualization)

    I installed virtual box and now I am unable to start window 8.
    I read online that there is a known issue with virtualization on windows 8. They suggested trying to toggle virtualization on/off in the bios which has not solved my problem. Does anyone know of anything else I can do to get my install back? I really do
    not want to have to re-install windows.  I have only had windows 8 installed for three weeks!

    I tried upgrading from VirtualBox 4.3.12 to 4.3.20 and ended up with an unbootable machine (Windows 8.1 Pro 64-bit). It would come up to the desktop but nothing would work - there were no icons on the desktop, the tray applications didn't seem to be loading,
    the transparent task bar was shown as a block of solid colour. Pressing CTRL-ALT-DEL brought up the menu where I could choose Task Manager, but the Task Manager itself would not show up, just a dialog warning me that a process was not responding and asking
    if I wanted to end the task (I forget the exact wording). Clicking "End task" that dialog removed the dialog only for it to appear again a minute later. It was not possible to do anything with the machine or to open the Task Manager.
    I have updated through a number of versions of VirtualBox without issue. 4.3.20 seems to be a bad update. Unless some other recent update has changed something in Windows so that the VirtualBox update now conflicts.
    I forced the system to turn off then used System Restore to reset it to an earlier time. System Restore told me it had failed with an error, but then when I rebooted the machine a dialog came up at the desktop saying that System Restore had succeeded. It
    works again now but I am stuck with the older version of VirtualBox.

  • HT4623 iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    iPhone 4s will not boot after trying to install ios7 beta 4. Stops at apple logo with progress line under it. how can I reset it or get it back up to do a restore then try the iOS 7 beta 4 install again. Issue was probably caused by disconnection

    Obviously since you have iOS 7 you're a developer.  As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum.  Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
    Thanks, and best of luck to you.
    GDG

  • Mac Mini will not boot after Security Update 2008-007

    Hello,
    A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
    Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

    Hi Arkku , and a warm welcome to the forums!
    I'd certainly give Sig's advice a try first.
    If that should fail...
    applesetupdone...
    This was Posted by: JoseAranda at September 9, 2006 3:48 AM
    "OK, restart your computer, hold down Command-s and type in the following:
    /sbin/fsck -fy Enter
    /sbin/mount -uaw Enter
    rm /var/db/.applesetupdone Enter
    # The rm command is the remove command which deletes the file.
    # Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
    reboot Enter
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    end of posted by: JoseAranda"
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  • HP Pavilion 15-n268sa will not boot after windows update (windows 8.1)

    After a series of windows update (windows 8.1) my HP Pavilion 15-n268sa will not boot up, no fan noises, no lights no nothing. 
    I have tried a "hard reset" a number of times with no success. 
    When the battery is present the white LED flashes 3 times when the power button is pressed. 
    Please please help. 

    Hello Cuffy,
    Welcome to the HP Forums!
    I understand you notebook will not boot after a series of Windows updates.
    Can you tell me if you are able to access the HP Recovery Manager by repeatedly tapping the F11 key while the notebook turns on? If you can access this, try doing a system restore to before you installed the updates. If not I would suggest you go through this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps.
    If it's the Caps Lock light that is blinking this document will tell you exactly what the error is (spoiler: 3 beeps is a memory failure). This could also explain the failed updates. The updates are stored in the RAM before being applied to the operating system.
    You can try reseating the RAM, or using only 1 of the RAM cards, as you have 2x4GB cards. If it still doesn't work with 1 card, try the other card to confirm it has failed.
    You can replace defective cards via HP Phone Support if covered under warranty or at the HP Part Store if not covered. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.
    Hopefully this information helps!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

    Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
    I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

  • Will Not Boot from Install Disc  & 4SNS/1/40000000: TG0D - Thermal Sensor?

    *Will Not Boot from Install Disc*
    I used the "option key" approach with the gray start up disk. At first it ejected the start up disk. Then I nudged the disk back in the machine and it showed on the screen as an option. I clicked on the start up disk image and it finally loaded.
    But, it won't accept the start up disk when holding down the "C" key at restart.
    *4SNS/1/40000000: TG0D*
    I did an Apple Hardware Test and received the following diagnostic:
    Version: 3A121
    Test Suite: Extended Test
    Loop Count: 2
    Result: Failed
    Failure code: 4SNS/1/40000000: TG0D
    *Thermal Sensor*
    A search for the failure code 4SNS/1/40000000: TG0D brought up an Apple Discussion topic entry stating: That error code indicates a problem with a thermal sensor. It could be not working or possibly not connected. You will need to take it to Apple for repair.
    Would a thermal sensor have anything to do with it not starting up when holding down the "C" key at restart? What are thermal sensor problem symptoms?
    *User File Folder Opened Up*
    The machine also starts up with my user file folder opened up rather than with a blank screen as it normally should
    I completed a DiskWarrior rebuild on the disk and verify disk shows it is fine.
    Any suggestions on what to do next with these issues?

    The answer was in your post: "You will need to take it to Apple for repair."

  • MacBook Pro will not boot after software update

    MacBook Pro will not boot after doing an Apple Software Update (of course they will not help you).  MONEY, MONEY, MONEY is the name of the game.  They can cause your computer to crash and still charge you! 
    Does anyone have an answer to why my computer is showing a little gear spinning for hours?  I have tried several things with NO luck.
    Thanks-

    Run through the list of fixes here
    Step by Step to fix your Mac

  • Photoshop CS4 will not launch after installing Yosemite.

    Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

    Here's the fix I found, by way of an explanation...
    Snow Leopard prompted me on my first startup with the following error:
    "There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
    The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
    Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
    So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
    Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
    Thanks for the ideas!

  • PE 9 will not load after installing Elements 10

    Installed Elements 10 on Vista 64-bit.  Did not uninstall Elements 9.  Now PE 9 will not load; get window Adobe Premiere Elements.exe - No Disk.  There is no disk in the drive. Please insert a disk into drive\Harddisk2\DR2.  Tried disk 2 of 3 from package, nothing happens.

    Tried twice, PE9 still locked up both times - I think the intent is to have me try PE10, because that did work!!!
      From: Steve Grisetti
      Sent: Monday, January 02, 2012 7:09 PM
      To: cptiger
      Subject: PE 9 will not load after installing Elements 10
            Re: PE 9 will not load after installing Elements 10
            created by Steve Grisetti in Premiere Elements - View the full discussion

  • Telephone will not work after installing fax wizard

    I have  a new HP Office Pro 8615.   After I installed the fax wizard, my telephone quit receiving or sending calls.  The only incoming call will ring on the fax.  Can I uninstall the fax, as I do not need it?

    Hi , Welcome to the HP Forums! I see that your telephone will not work after installing fax wizard, for your HP Officejet Pro 8615. I am happy to help!  What is the Operating System you are using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. If you do not need the fax, all you should have to do is unplug the phone cable from the back of the printer. That will prevent the printer from using the fax function.  If your phone continues not to work, I would consider contacting your phone provider.  Thank you for posting!  “Please click the Thumbs up icon below to thank me for responding.”

  • HT4528 My (2) I5 phones ios 8.0.2 firmware 7.03.00 will not rotate after installing IOS 8

    My (2) I5 phones ios 8.0.2 firmware 7.03.00 will not rotate after installing IOS 8. I have lock portrait orientation turned off. It won't even after turning the phone to the portrait landscape position it will not even turn TURN ON!!

    It shows I5c... the phones are I5 not I5c's

  • Boot Camp will not work after installing recovery disk

    I purchased a refurbished Macbook Pro 2012. I went ahead and installed dual ssds and used the Mac OS X recovery disk from USB flash drive. I wanted to install WIndows 7 through bootcamp. Bootcamp will not start after selecting continue. I'm not sure if boot camp is corrupted or something I did wrong.

    Well you'll need to see if that remote app has an update or if it is compatible with IOS 7.
    since you didn't state which remote app your using.

Maybe you are looking for