10.6.1 installed this morning - drive not found on reboot
Help!
Installed 10.6.1 update that was in Software Update this morning
File downloaded fine, installation looked like it went fine - system rebooted - and I get the folder icon with a question mark on it.
Rebooted a few more times just to make sure - no good
Held down option during reboot to see if any drives were there at all - none
All my software is at home - i have nothing on me
-Mario
Sorry I didn't see this sooner. I don't know whether you are a DiskWarrior customer, or whether you would want to spend $100 to avoid restoring from backup, but DiskWarrior would fix that for you.
Your disk's Journal Info Block, part of the file system that supports the disk's data and is not visible to the user, was corrupt. There is a new feature in Snow Leopard that saw this corruption as something that doesn't exist and prevented the mount. Running DiskWarrior would repair the disk and prevent the extra headaches.
If nothing else, someone with a similar problem that finds this may avoid having to restore from backup. Glad you are back up and running.
Rusty Little
Alsoft, Inc.
DiskWarrior development team
Similar Messages
-
Microsoft update invited me to update to 14.1.4 today but the process fails with the following error:
"Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume."
System info:-
OS X
Build# 12E55
SN# C02jjoNFDRV7
Version 10.8.4
Processor 1.7 GHz Intel Core i5
Memory 4GB 1600 MHz DDR3
Startup Disk:- Macintosh HD - 24.15 GB Availble - 120.47 GB Total.
Partition Map Scheme: GUID Partition Table
What I do ?
1-I Click Verify Volume its get error msg " Disk Utility stopped verifying MAcintosh HD"
2- Volume bitmap needs minor repair for orphaned blocks????!!!
3-Invalid volume free blocks count !!!
4-The Volume MAC HD was found corrupt and need to be repaird!! How to repair???
5-Error: This Disk need to be repaired us...es window appears, Choose Disk Utility.
Please I need Full Support for above problem
Kind Regards,
Anas Al Areefimisalaram wrote:
Csound1@ thanks for reply
i want to install microsoft office in my macbook pro
how can i do tat...plz tell me
Buy a copy of Office for Mac, install it, update it. -
The latest Firefox update, installed this morning 6/21/2011, disabled McAfee. After installation, a window appeared stating that McAfee was not compatible and couldn't be enabled. This is NOT ACCEPTABLE! Please let me know how to uninstall this update.
Upgrade your browser to Firefox 8 and check
* getfirefox.com -
Table Driver Not Found message during initial boot up - What is this?
Every since upgrading to 10,5 when I boot or change accounts I get the message, "Table Driver Not Found". I am not sure what program this is but there is what looks like the letter A and an art stand? I press ok and never see it again unless I log off or reboot.
Any clue?Did you mean "Tablet Driver Not Found"... oh you did in the title!
So, did you ever have a Wacom Tablet or anything installed before?
Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
HP Deskjet Ink Advantage K209a Driver not found when installing windows 8
MY PRINTER " HP Deskjet Ink Advantage K209a" OPERATING SYSTEM Windows 8 32 bit
Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
[Personal Information Removed]
Please give me a suggestionHey 101214,
I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a). I also see that you need a driver link for this OS and Printer. Please follow the link below to download the driver for this printer/OS combo.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
If you need information on how to perform the USB installation on your Windows 8 PC please click here.
I wish you the best!
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
Windows 7 install stops at "CD/DVD driver not found"
When trying to install Windows 7 with boot camp, all goes well until it stops and gives me the "CD/DVD driver not found". I have a mid 2010 Mac Pro with a 500 GB SSD drive. I have burned a DVD at 1X from a iso file.
ThanksCan you verify the MD5/SHA1 of the DVD with the ISO using OS X 'openssl md5' or the M$ FCIV tool? The source of your ISO should be able to provide MD5/SHA1.
OS X Example
openssl md5 ~/Desktop/GRMCPRXVOL_EN_DVD.cdr
MD5(/Users/MyName/Desktop/GRMCPRXVOL_EN_DVD.cdr)= 977f4f0f1400be91855789213e07b031
Windows FCIV example
D:\>C:\"Program Files (x86)"\FCIV\fciv
// File Checksum Integrity Verifier version 2.05.
Usage: fciv.exe [Commands] <Options>
Commands: ( Default -add )
-add <file | dir> : Compute hash and send to output (default screen).
dir options:
-r : recursive.
-type : ex: -type *.exe.
-exc file: list of directories that should not be computed.
-wp : Without full path name. ( Default store full path)
-bp : specify base path to remove from full path name
-list : List entries in the database.
-v : Verify hashes.
: Option: -bp basepath.
-? -h -help : Extended Help.
Options:
-md5 | -sha1 | -both : Specify hashtype, default md5.
-xml db : Specify database format and name.
To display the MD5 hash of a file, type fciv.exe filename
D:\>C:\"Program Files (x86)"\FCIV\fciv -add Windows8.1-64bit.cdr
// File Checksum Integrity Verifier version 2.05.
f104b78019e86e74b149ae5e510f7be9 windows8.1-64bit.cdr -
I'm running windows XP, trying to uppdate iTunes, instalations pack iTunes.msi not found. Is it posible to download this?
I have tried to seek for it on the computer but no.
Se pictureI had the same problem and managed to fix it by doing the following :
First go to the control panel
Choose Add/Remove programs
Find iTunes in the list
Select "Change" and then, when it comes up with the option, "Repair"
I found that this fixed the problem for me and I was able to do the update without coming up with this error - hope it helps! -
Sony MDR-zx550bn driver not found installing on Windows 7.
I keep getting "driver not found" when trying to install my headphones on a Windows 7 computer.
Hi richardph22,
Welcome to Sony Community!
Possibly the driver/s (Bluetooth or Audio) is not properly installed or, for some reason, deleted on your computer. Kindly follow the troubleshooting guidelines here:
If you're trying to connect your headphones to your computer via Bluetooth, please follow these steps:
Reinstall Bluetooth driver -> Go to Device Manager -> Bluetooth -> right click and Properties -> Driver tab-> select Uninstall (DO NOT DELETE) -> restart the computer. The driver will be reinstalled. NOTE: If Bluetooth is not listed, check under Network Adapters -> Bluetooth. Or Click View -> Show hidden devices.
Download or update Bluetooth Driver -> visit the support page (website) of your computer and download the Bluetooth driver.
If the headphones plugged in to the computer via headphones jack, kindly follow these:
Reinstall Audio driver -> Go to Device Manager -> double click Sound, video and game controllers -> right click and select Properties -> Driver tab -> Uninstall the driver/s (DO NOT DELETE) -> Restart the computer. The driver/s will be reinstalled. NOTE: If Audio is not listed, click View -> Show hidden devices.
Download or update Audio Driver -> visit the support page (website) of your computer and download the Audio driver.
Hope these help.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"
-
Can some one help me with diagnostic test result " apple mobile device driver not found"?
I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone. I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?. iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0013AC2C08548378
Current user is an administrator.
The current local date and time is 2012-06-28 15:23:45.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel(R) G41 Express Chipset
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
Description: Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Thu Jun 28 15:17:19 2012
Lease Expires: Fri Jun 29 03:17:19 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
G: Optiarc DVD RW AD-7220A, Rev 1.01
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
This is my post:
https://discussions.apple.com/thread/4063223
Please, we need your help. -
JDBC Driver not found when connecting to Data Federator XI 3.0 SP3
Hello,
I am trying to connect Crystal 2008 to Data Federator however I am getting the Error
Failed to open connection.
Details: JDBC Driver not found.
The JDBC Drivers are installed and working for the Universe Designer, however I am unable to get it working for Crystal. I am using the following connection parameters on Crystal:
Connection URL: jdbc:datafederator://<<servername>>:3055/<<catalog>>
Database Classname: com.businessobjects.datafederator.jdbc.DataFederatorDriver
Any Advice on what I may have missed?The issue was solved, thanks to Patric Wan:
u201CFailed to open the connection. Details: JDBC driver not found.u201D
This means Data Federator JDBC driver was not added to:
C:\Program Files\Business Objects\common\<version>\java\CRConfig.xml
How to connect the Data Federator Server using JDBC?
1. Retrieve the following files from the machine where Data Federator is installed, from the directory [data-federator-installation-dir]/JdbcDriver/lib.
- thindriver.jar
- avalon-framework-4.1.5.jar
- jacorb.jar
- log4j-1.2.8.jar
- logkit-1.2.jar
2. Copy these files to a directory of your choice ([your-jdbc-driverdirectory]).
3. Add [your-jdbc-driver-directory]/thindriver.jar to CRConfig.xml <Add to Classpath tag, you can refer to original sample.CRConfig.xml should be at: C:\Program Files\Business Objects\Common\4.0\java\CRConfig.xml, or search your BOBJ products install to find this file>
4. URL: jdbc:leselect://<host>[:<port>][/[<catalog>]][[;param-name=value]*]
Class Name : LeSelect.ThinDriver.ThinDriver
Edited by: Craig Sander on Feb 12, 2011 8:22 PM -
Drive not found in library database
Greetings.
I'm new to OSB and am having tape drive, volume problems.
File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
Please advise.
Transcript:
2014/04/23.11:44:01 ______________________________________________________________________
2014/04/23.11:44:01
2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:44:01
2014/04/23.11:44:01 ---
2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.11:44:01 drive not found in library database (library manager)
2014/04/23.11:45:01 ______________________________________________________________________
2014/04/23.11:45:01
2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:45:01
2014/04/23.11:45:01 ---
2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.11:45:01 drive not found in library database (library manager)
2014/04/23.11:46:01 ______________________________________________________________________
2014/04/23.11:46:01
2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:46:01
2014/04/23.11:46:01 ---
2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.11:46:01 drive not found in library database (library manager)
2014/04/23.11:48:01 ______________________________________________________________________
2014/04/23.11:48:01
2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:48:01
2014/04/23.11:48:01 ---
2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.11:48:01 drive not found in library database (library manager)
2014/04/23.11:49:01 ______________________________________________________________________
2014/04/23.11:49:01
2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:49:01
2014/04/23.11:49:01 ---
2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.11:49:01 drive not found in library database (library manager)
2014/04/23.11:50:01 ______________________________________________________________________
2014/04/23.11:50:01
2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:50:01
2014/04/23.11:50:01 ---
2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
2014/04/23.11:50:01 drive not found in library database (library manager)
2014/04/23.12:00:01 ______________________________________________________________________
2014/04/23.12:00:01
2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:00:01
2014/04/23.12:00:01 ---
2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.12:00:01 drive not found in library database (library manager)
2014/04/23.12:01:01 ______________________________________________________________________
2014/04/23.12:01:01
2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:01
2014/04/23.12:01:01 ---
2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.12:01:01 drive not found in library database (library manager)
2014/04/23.12:01:24 ______________________________________________________________________
2014/04/23.12:01:24
2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:24
2014/04/23.12:01:25 ---
2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.12:01:25 drive not found in library database (library manager)
2014/04/23.12:04:01 ______________________________________________________________________
2014/04/23.12:04:01
2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:04:01
2014/04/23.12:04:01 ---
2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.12:04:01 drive not found in library database (library manager)
2014/04/23.12:05:01 ______________________________________________________________________
2014/04/23.12:05:01
2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:01
2014/04/23.12:05:01 ---
2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.12:05:01 drive not found in library database (library manager)
2014/04/23.12:05:21 ______________________________________________________________________
2014/04/23.12:05:21
2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:21
Backup started on Wed Apr 23 2014 at 12:05:51
Volume label:
Volume tag: LEV018
Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Volume ID: mf_2min-000025
Volume sequence: 1
Volume set owner: root
Volume set created: Wed Apr 23 12:05:51 2014
Volume set expires: Wed Apr 23 12:07:51 2014
Media family: mf_2min
Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Archive label:
File number: 1
File section: 1
Owner: root
Client host: x4440a
Backup level: 0
S/w compression: no
Archive created: Wed Apr 23 12:05:51 2014
Encryption: off
Dumping all files in /etc
Backup complete on Wed Apr 23 2014 at 12:06:03
Backup statistics:
status 0
devices IBM4_0_0_1_1
devices 1
volumes mf_2min-000025
voltags LEV018
file 1
host x4440a
encryption off
start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
entries_scanned 3373
kbytes_scanned 40556
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 2047
directories 315
hardlinks 0
symlinks 1011
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 39264
dev_kbytes 35977
dev_iosecs 2
dev_iorate 18.4 MB/S
wrt_iosecs 15
wrt_iorate 2.5 MB/S
physical_blks_written 1102
write_errors 0
physical_blks_read 2
read_errors 0
error_rate 0%
path /etc completed, status 0
[root@x4440a backup]# obtool lsdev -lvg
SL500:
Device type: library (ACSLS)
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: e0b58224-a1a4-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
ACSLS server: v215f
ACSLS port: 0
ACS id: 0
ACSLS access id: acsss
Reservation 1:
Component: obacslibd
Host: x4440a
Process: 32195
Element counts / addresses:
10 mte: 1 - 10
281 se : 1 - 281
1 iee: 1
1 dte: 1
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 0 iee 1 dte 1
From iee, to: mte 0 se 0 iee 0 dte 0
From dte, to: mte 0 se 1 iee 0 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
State of barcode reader: enabled
IBM4_0_0_1_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: 14 minutes, 58 seconds
UUID: 179eb954-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg18
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD4
Firmware: C7Q0
Serial number: 1310127325
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_2_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 7498ff66-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg16
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1168002114
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP6_0_0_3_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 3
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: cd20d3fc-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg21
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 6-SCSI
Firmware: J39S
Serial number: HU1233PPNN
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_1_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 5b6cf420-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg15
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1068002447
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP4_0_0_2_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 8bd3659a-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg13
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 4-SCSI
Firmware: H64S
Serial number: HU1803168E
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_3:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 3
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 9ee7dbd4-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg23
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NFE
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_4:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 4
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: b45b889e-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg24
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NBF
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
[root@x4440a backup]#
[root@x4440a backup]# obtool lsvol -L SL500 -l
Inventory of library SL500:
in 1: barcode F50216, oid 100
in 2: barcode I50116, oid 101
in 3: barcode LEV008, oid 102, mediainfo hw encryptable
in 4: barcode LEV010, oid 103, mediainfo hw encryptable
in 5: barcode LEV017, oid 104, mediainfo hw encryptable
in 6: volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
in 7: barcode LEV049, oid 106
in 8: barcode LEV058, oid 107
in 9: barcode PQ4196, oid 108
in 10: barcode PQ4883, oid 109
in 11: barcode S50282, oid 110
in 12: barcode S50290, oid 111
in 13: barcode S50291, oid 112
in 14: barcode S50292, oid 113
in 15: barcode S50300, oid 114
in 16: barcode S60111, oid 115
in 17: barcode S60113, oid 116
in 18: barcode SF6410, oid 117
in 19: barcode SF6411, oid 118
in 20: barcode SF6412, oid 119
in 21: barcode SF6413, oid 120
in 22: barcode SF6414, oid 121
in 23: barcode SF6416, oid 122
in 24: barcode SF6417, oid 123
in 25: barcode SF6418, oid 124
in 26: barcode SF6419, oid 125
in 27: vacant
in 28: vacant
in 29: vacant
in 30: vacant
in 31: vacant
in 274: vacant
in 275: vacant
in 276: vacant
in 277: vacant
in 278: vacant
in 279: vacant
in 280: vacant
in 281: vacant
in iee: vacant
in dte: vacant
[root@x4440a backup]#Rich
Thanks for your response.
ACSLS is part of the configuration requirements I need to have in this OBS environment.
I'm going to re install OBS just to see if anything changes.
Thanks again.
Update:
When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
After the daemon was restarted I was able to use the attached tape drives. -
after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks
YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga. -
Error msg. 1327 Drive not found REALLY NEED HELP
Hello,
I recently installed iTunes and ever since then whenever I try to install new software from a website I.E. Adobe.com "Reader" I get an error message saying F:\ drive not found, which there is not F:\ drive.
I have gone to administrative tools but have only found C:\ drive. Now, when I go to "Run" in the Start menu I see in the browse menu "F:\iTunes.exe and iTunesHelper.exe
My iTunes does work properly but on start-up do get an msg. saying it was not installed proberly and to re-install.
I do not want to re-install iTunes for fear I will get the same msg. and not be able to complete install.
Really need help on this because I need to install Acrobat Reader for work.
Thanks
Mark
[email protected]Doublechecking something.
Could you confirm for us both that error message number and message?
Checking, because the 1327 error message number usually comes with an "invalid drive" message rather than a "drive not found" message. -
SAP Design Studio ODBC Driver Not Found error while creating HANA connection.
Hi,
While creating SAP HANA ODBC connection in Design Studio via Tools > Preference > Application Design > Backend Connection. I am getting error ODBC Driver Not Found. Error screen shot is attached.
My Design Studio version is 1.3 win 32 bit
My OS Win 7 64 bit
I have installed both HANA client 32 bit and 64 bit.
I have tried creating DSN ODBC connection via "C:\Windows\SysWOW64\odbcad32.exe" and via Control Panel > Administrative tools > Data Sources(ODBC). But it does not detect it either.
I am not sure what needs to change to let Design Studio know which HANA client driver to use.
Please help!.Hi Rohit,
This seems to be a known bug with Design Studio. Please see the SAP Note below on this.
1774480 - Fix launching of ODBC Data Source Administrator
Regards,
Abhijit -
Garage band newbie here...Been trying to record using PreSonus as my interface..having nothing but problems when I try to bring up
garageband. Multible restarts did help at first but now I can get no sound and cant seem to load the drivers at all in output/input...any help with this problem?YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.
Maybe you are looking for
-
I just got an iPhone 4 and have been downloading apps from the iTunes store when I encountered difficulty with two specific apps. Each time I try to download dictionary and star walk I get a message saying they are over 50MB and I need to be connecte
-
So, I'm rendering out an audio visualization for my portfolio in .mov with the H.264 or any other compression but the thing is, After Effects keeps crashing. I get the following error message and crash log: I have absolutely no idea what is going on.
-
Dell Laptop Solaris Installation
Hi I have Dell Inspiron 8100 with P-III, 256 MB RAM. I would like to install Solaris(Intel) 8 10/01on this. When I run installation, after device check it gives an error: epb0: M II link not found. and when it asking to enter laguage option, it won't
-
Report Painter - Available characteristics
Hello all, Simple Question on report Painter... When I select characteristics to the lead column I expect to see al parameters that been choosen for the library. However, only part of the characteristics are available. I try to figure out how can I
-
Billing request appearing multiple times in document flow
Hi, After upgrading from 4.6c to ECC6, for contracts the billing request(same document number, same items) is appearing multiple times in the document flow. Please help me in resolving this issue. Thanks, Ramesh