10.6.2 and Firefox 3.5.5 password problems

Before 10.6.2 Firefox worked as normal, automatically populating my different site login information. Since 10.6.2 the login prompts come up empty on most sites. Have checked Mozilla forums and reset and checked all my FF preferences. The logins are being saved by FF but apparently something new in 10.6.2 is preventing most of them from filling in automatically. This behavior started right after running the combo updater to 10.6.2. Anyone else have this or know what the problem is?

For me, no problem along your lines with FF 3.5.5 and 10.6.2. I use no add-ons. Sounds a bit lame, but you could disable your add-ons and see what happens. If doing so works, then add them back one at a time to find the culprit(s).

Similar Messages

I'm using AOL for email and Firefox 9.0.1. Problem started 2 days ago. Before that I put in the first two letters of an email address and it gave me a list of possibles. Now I get "undefined" for each possible instead of the email address.

After updating to Firefox 9.0.1 there were no problems. My contact list still shows as it did before this problem arose. When I type in the first letter or two of the email address, it used to give me a list of possibles. Now t is just showing the email address as "undefined" when it gives me suggestions for the email address I'm typing in the send line. This means that instead of being able to click on my choice in the possibles it gives me, I have to go to my contact list, find the name and then click on it if I'm sending the email to one person. If it goes to more than one, I either have to type in the full address or use copy and paste from the contact list. This is a huge hassle. Any help is appreciated.

I moved the file formhistory.sqlite to another file folder. I then started Firefox up again to see if it worked or if I needed to start it in Safe Mode. No need for Safe Mode. It now works exactly as it should. Thank you so much!!

Apple ID duplication and invalid email to update password problem

I have a situation where I appear to have 2 apple ids. I cannot remember the password of the one that most of my apps have been downloaded using. The email address with that apple ID is no longer active so I cannot reset the password as it goes to an old inactive email address as the default.
I tried to add the email address used as the apple ID that the password has been forgotten onto the valid emails for the new apple I'd but it will not let me as it is associated with another apple ID account.
How can I update the apple ID that was used to upload all my current apps to the new apple ID I have without having an email address to use to update the forgotten password?
The two apple Ids are very similar:
The one I cannot remember or change my forgotten password is ( The old email address no longer active)
The new one that I know the password for and has a valid email address
Can you help me sort this so I can login to update my apps and download new ones please?
<Email Edited by Host>

Apple is adamant. Apple does not merge Apple IDs and Apple does not transfer content from one Apple ID to another Apple ID.
If you wish to resurrect the old ID, the account support team can assist you to do that, but you will need to come up with a new functioning email address that is not associated with your other Apple ID for them to do so. When you have an email address to use, call Apple Care for your country and ask for help setting an new password for the old ID and then update it with the new email address.

How can I correct the problems I've been experiencing lately with drop-down menus in general as well as and leading of text. It 's occurring on both Safari and Firefox browsers.

The above headline pretty much covers the problems.
Access to the drop down menus is erratic. Sometimes it's problem-free, but at other times it's impossible to see the options on the menu, or if they are visible, it's impossible to effect a change by clicking on one of them. The times I notice it most is when I am trying to change fonts or font sizes, but it occurs at other times, as well.
It's also frustrating to have to deal with double spacing (for example, when describing items on eBay). Sometimes the text flows normally, but if I force a return, the text that follows usually is double-spaced.
Often, the justification option does not work either.
Occasionally, I can get around one problem or another by switching back and forth between Safari and Firefox, but eventually, the original problem resurfaces.
Because it happens on both browsers, eBay tech support is inclined to think the problem is in my software. (I'm inclined to agree.)
Although they have suggested clearing the history in FF, that option must have been relocated, because it'sno longer under the "Tools" menu, where it was in the past. I also can't find the clear your cache option on OS Safari or 10.8.3.

callthescribe wrote:
...Although they have suggested clearing the history in FF, that option must have been relocated, because it'sno longer under the "Tools" menu, where it was in the past. I also can't find the clear your cache option on OS Safari or 10.8.3.
I don't think it'd help much but clearing history is now in the History menu, and setting FF to clear history on exit is near the bottom of the Privacy tab of FF Preferences.
Also, if you don't have the Develop menu in Safari, open Safari preferences, click Advanced, and select “Show Develop menu in menu bar.” You'll find "Empty Caches" there.

Problem with web.show_document with Jinitiator and Firefox

Not sure Firefox 2.0 is officially certified with Forms 9.0.4.1 and Jinitiatorbut regardless we have some users who want to use this combination. Everything seems to work fine except for the calls to web.show_document which opens a new browser window and displays some html etc.
The problem is that even though the client Forms JVM is Jinitiator (1.3.1.18 or .21) when the call to web.show_document occurs somehow the Sun Java Plugin starts and having the two JVM's at once causes a fatal crash in Firefox. Can anyone suggest a way to preven the second JVM from opening?
When the user uses the Sun Plug as the client Forms JVM there is no problem as the second JVM does not open. Unfortunately some users insist on Jinitiator with Firefox hence the problem. -quinn

James,
This whole applet embedded in a browser model for webforms is driving us batty at times. The list of problems includes:
1) Users are constantly tempted by browser controls and accidentally do all sorts of things to get them in trouble. This has included but not limited to using the navigation arrows, jumping off to read their email in the same window as the form and returning to a dead forms session, minimizing, resizing, blurring off to another window and then returning back by clicking on the title bar of the browser and wondering why the form doesn't tab etc.
Sure hobbling the browser by opening with limited functionality is a possibility but not a complete solution.
2) New versions of browsers seem to break something. Both IE 7 and Firefox 2 have their own problems with web.show_document, especially file associations such as CSV and DBF and trying to open things in Excel in IE7.Firefox seems to have less problems for some yet some some oddities like the one that started this thread (and 2.0 opening new windows in tabs by default instead of windows).
3) JVM jigsaw puzzle. Is it Jinit or Sun, which versions? Which combinations of browser version and JVM works.
4) General fragility of the whole architecture. Running a client JVM in a web browser on top of a PC Operating system connectiong to a forms server over a network embedded in a Java Container server on a full blown web server running on a unix operating system is pushing the bubble. Throw in the mix that any of these components can be combined in numerous ways makes one wonder how it works as well as it does.
Still users randomly getting dropped connections to forms server (network gltches?). General sluggishness (poorly written forms?). Periods of users with unduplicatable errors primarily network related it would appear.
General feel that it is not rock solid stable. Perusing metalink documents on performance and tuning gives too much and too general info to troubleshoot so just shrug shoulders and say 'network problem'.
What's the solution? Java webstart would seem to help at least with the browser realted issues but is that supported and documented how to use yet. Also we'd lose web_show_document which is critical (could it be replaced by webutil calls to open browser?).
-quinn

Problems with print to pdf with Acrobat Pro 9 and FireFox 8

***The page I am using for my base is: http://blogs.adobe.com/digitalpublishing/2010/12/google-ebooks.html
***I have Adobe Acrobat 9 Pro and FireFox 8 installed.
The problem with FireFox is when I select a part of a web page and try to print that selected text the first line gets chopped, if the text is small the first line might even be missing completely. Perhaps it is a margin issue but not sure how to modify this.
I know I am not being very clear but if anybody has any ideas or would like further info please let me know.
Thank you.

I suspect if you do the same process with a print to paper, you will get the same result. I got the same result with SeaMonkey, but IE8 printed the full font to a PDF. That would suggest it is not Acrobat, but the browser. As I said, suggests, so be careful about drawing your conclusions.

Why i can't see any image on flickr. That happens most of the times but not always? Both Safari and Firefox

Why i can't see any image on flickr.
That happens most of the times but not always?
Both, on Safari and Firefox i experience the same problem!
I reseted Safari but seems to be useless

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.

When clicking on links that open in a new window, the links don't open and Firefox freezes in a way. I can navigate the page I am on but cannot click to open a new tab or bookmark.

When navigating the internet, if I come across a web page that has a link to open a picture or program in a new window, if I click on it, it does not open. Firefox immediately looses functionality in that I cannot open a new tab with the mouse wheel, right click to open a new tab, or use my bookmarks in either the drop down or toolbar to navigate away. I can usually still navigate the page that I am on, for example, (https://loanconsolidation.ed.gov/AppEntry/apply-online/appindex.jsp), when it freezes I cannot click on any of the content at the center of the page but I can still use the links from the list on the far left. For an example of the pictures, (http://www.insect-sale.com/), if you click on "New Arrivals" at the top of the page it takes you to a list of products that can only be viewed by clicking on them. Usually a picture of the item would open in a small window but it does not and Firefox freezes. This has also happen when I try a view a degree audit on a school's website where a program would usually open in a new window. The only thing I have been able to find that still functions properly when this happens is the home page button. I can click on it or use the wheel to open it in a tab just fine, but if I try and go anywhere else I cannot. The only way I can get Firefox back to normal is to use the Task Manager and end the process. Another thing I have noticed, that may or may not be related; is that my Norton Internet Security toolbar, that should show up below the bookmarks toolbar and above the tabs, only shows up about 1 out of every 10 times I open Firefox. Some days it doesn't show up at all. If it does show up and I log into Identity Safe, the autofill for the programed website works, even if the toolbar doesn't show up the next time I open Firefox.

Go to Tools->Options->Apps
Here you should see two columns: Content Type on the left, Actions on the right.
Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
Always Ask - Firefox will ask each time: What do you want to do with this file?
Save file - Firefox will save this file to your computer
Use - Firefox will give this file to the program to open it
In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
Tools->Options->General->Download

HT204416 My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
3. If the above steps don't resolve the problem, please describe it in more detail.

I run mac os 10.4.11 and firefox 7 will not open, and I get an error message saying firefox is not supported on this version of mac os. is there a different version I can download? Am I missing something?

firefox used to work no problem, I updated firefox a few month ago, now firefox will not open and I get the error message as above

As of Firefox 4.0 and newer one needs both OSX 10.5+ and a Intel Mac.
The last version to work on a Intel Mac using OSX 10.4.* is Firefox 3.6.*
http://www.mozilla.org/en-US/firefox/all-older.html
http://www.mozilla.org/en-US/firefox/7.0/system-requirements/
http://www.mozilla.org/en-US/firefox/4.0/system-requirements/
http://www.mozilla.org/en-US/firefox/3.6/system-requirements/

Urgent Help Required - Video Not playing on IE11 and Firefox

Hi,
I need Urgent Help , I am trying to Play this Presentation on IE 11 and Firefox and it doesn't play the Video part which is FLV and f4v formats.
I have been googeling it but couldn't find a solution so far ,Can anyone please help , its really urgent as I am done with the Project ,and this is the last bit which I have been struggling with for a while now.
Here is the HTML Code I am using :
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
<head>
<title>index</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css" media="screen">
html, body { height:100%; background-color: #ffffff;}
body { margin:0; padding:0; overflow:hidden; }
#flashContent { width:100%; height:100%; }
</style>
</head>
<body>
<div id="flashContent">
   <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="800" height="600" id="index" align="middle">
    <param name="movie" value="index.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#ffffff" />
    <param name="play" value="true" />
    <param name="loop" value="true" />
    <param name="wmode" value="window" />
    <param name="scale" value="showall" />
    <param name="menu" value="true" />
    <param name="devicefont" value="false" />
    <param name="salign" value="" />
    <param name="allowScriptAccess" value="sameDomain" />
    
    <object type="application/x-shockwave-flash" data="index.swf" width="800" height="600">
     <param name="movie" value="index.swf" />
     <param name="quality" value="high" />
     <param name="bgcolor" value="#ffffff" />
     <param name="play" value="true" />
     <param name="loop" value="true" />
     <param name="wmode" value="window" />
     <param name="scale" value="showall" />
     <param name="menu" value="true" />
     <param name="devicefont" value="false" />
     <param name="salign" value="" />
     <param name="allowScriptAccess" value="sameDomain" />
    
     <a href="http://www.adobe.com/go/getflash">
      <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
     </a>
    
    </object>
    
   </object>
</div>
</body>
</html>
<----------------------------------------------------------------------------------------- ----------------------------------------------------------------->

Any Help in this Regards will be highly appreciated

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

On Windows 8.1 and Firefox 36.0.1 the textarea in forms has no carriage returns. Earlier versions the forms work. Is there a fix for this?

Prior to this version of Firefox 36.0.1, the <textarea> in my HTML forms was working; displaying carriage returns. In version 36.0.1 they no longer function properly. Instead when I enter a carriage return, it displays a space instead of a newline. I went to the most basic textarea testing
<textarea> name="comments" cols=20 rows=10 </textarea>
to make sure I wasn't introducing anything with other languages.
I am using Windows 8.1 Pro. I rolled back to Firefox 35.0 and everything works fine. I install 36.0.1 and it stops working.
I have access to another Laptop also running the same version of windows and Firefox and it appears to be doing strange things as well. I am suspicious in that I started noticing this immediately after a windows upgrade last night. The laptop also experienced the issues it is having immediately after a windows update yesterday evening.
I have yet another PC running a different version of windows and Firefox and it too works fine. It looks like the issue is where there is windows 8.1 Pro and Firefox 36.0.1.
Do you guys have any idea what is going on here?
Thanks
JMRAUPE57

The current release supports the white-space property for a text area and it is possible that the website uses white-space: pre instead of white-space: pre-wrap.
The former will prevent Firefox from wrapping the text.
You can check that in the Inspector via the right-click context menu.
*https://developer.mozilla.org/Tools/Page_Inspector
See:
*https://developer.mozilla.org/en-US/Firefox/Releases/36#CSS
<blockquote>The white-space property is now working on <textarea> HTML elements (bug 82711).</blockquote>
See also:
*[[/questions/1050456]] Word wrap problems in 36.0

When I try to use the print/save as pdf option, I get a scripting error and Firefox usually freezes.

On my MacBook Pro running OS 10.5.8 and Firefox 3.6.13, I am trying to save documents as pdfs under the print window, I get a scripting error and Firefox usually freezes/becomes nonresponsive. This happens every time I tried to perform this task.

This is a fresh install of Windows 7. It is installed on virtual environment on my mac mini using the parallels virtualization application.
I purchased the windows version of dream weaver CS 6 through an online website which I tried to install to my new windows instance. This is the academic version of the Dreamweaver application with a perpetual license that I am trying to install.
I verified my eligibility through adobe which gave me a link to download the CreateiveCloud Set-up program. I downloaded the install program in my windows environment and program and the gave the above error message. Below is a copy of my computers specs.

Content search webpart in sharepoint 2013 paging is not not working for anonymous users on IE9, IE10 and Firefox

Dear All,
Issue in CQWP paging on IE9, IE10 and Firefox
We have created CQWP in SharePoint 2013 for images rollup and its paging perfectly working for authenticated users on all browsers but it’s not working on public facing site for specific browser
while we are trying to click on paging getting
something went wrong and correlation with correlation id
We did log analysis and getting different kind of problem description on every click some time contents authentications error, sometime memory
Once I put webpart inside the  its completely stop working
  so we placed webpart outside  currently
Strange point is its working on IE11. Please help us its highly appreciated
Code Details :
<div data-name="WebPartZone">


<div xmlns:ie="ie">




</div>




                        

<div ms-webpart-chrome-fullWidth "><div webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ1" width="100%" noindex
" onlyformepart="true" allowdelete="false" ><div style="display: none;"></div><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr"
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_csr" style="display: none;"></div><noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_noscript">It
looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48"><div><div
id="WebPartWPQ2_ChromeTitle"><span title="" id="WebPartTitleWPQ2"><h2 style="text-align:justify;"><nobr><span></span><span id="WebPartCaptionWPQ2"></span></nobr></h2></span></div><div
webpartid="00000000-0000-0000-0000-000000000000" haspers="true" id="WebPartWPQ2" width="100%" ms-WPBorder noindex ms-wpContentDivSpace " onlyformepart="true" allowdelete="false" ><div componentid="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"
id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_csr"><div id="DataProvider" name="Control"></div></div><noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00_noscript">It
looks like your browser does not have JavaScript enabled. Please turn on JavaScript and try again.</div></noscript><div id="ctl00_ctl00_PlaceHolderMain_ComponentMain_ComponentPropertyGrids_g_9f61c988_228e_4f91_8d67_04314f144f48_ctl00"></div><div></div></div></div></div><div></div></div></div>

      </div>

Hi,
In the “Property Mappings” of the Content Search Web Part, we can see that the Picture field will only display the value retrieved from “PublishingImage;PictureURL;PictureThumbnailURL”,
because there is corresponding column in OOTB Document Library holds the valid value of a thumbnail image for a document, that’s why documents from Document Library display no thumbnail image in a Content Search Web part.
If you want to display thumbnail images for documents of Document Library, you can add a custom Picture column to hold the thumbnail image of a document, set the “Property
Mappings” to display this custom Picture column.
By doing this, every time uploading a document to this library, setting a thumbnail image(provided by common users, not generated by SharePoint automatically) for
that custom Picture column, in the Content Search Web Part, the thumbnail image will display.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

10.6.2 and Firefox 3.5.5 password problems

Similar Messages

Maybe you are looking for