10.6.2 & Eduroam problem

Is it possible to log on Eduroam network using Snow Leopard (10.6.2)?? I am following directions found all over the internet, but every time I keep gettin 802.1x error. I just got my Macbook Pro because I'm a graphics design student, and I can't get online at my college. My friends with 10.5.x Leopard have no problem connecting. Will there be a patch, because it's obvious that there's a problem with Snow Leopard?

I also have problems. See http://discussions.apple.com/thread.jspa?threadID=2348215&tstart=0
It seams that it depends on the authentication protocol used. I can connect to Eduroam if I use an account that uses TTLS at the home server like SUFRNet or RuG, but not to my own home institute (ASTRON), which uses PEAP-MSCAHPv2 authentication.
Is seems something goes wrong in the authentication protocol negotiation. It worked fine on 10.4/Tiger and on my iPhone, it's specifically Snow Leopard that's broken.
Is your institute also using PEAP-MSCHAPv2, or is it using something else?
If Iker Exebarria can connect, please tell us how you solved it. I've tried everything I could find.
Message was edited by: Adriaan Renting

Similar Messages

Eduroam problem

Hello
I have a very odd problem with my T42. Whenever i try to install the network client, "Eduroam, my laptop won't start up. After typing in my password I can't get further than the blue Welcome-message from XP. I'm running Windows XP proffesional with SP 3 and I need "Eduroam" to connect to the wireless internet at school.
Can some of you guys help me?
Ankeret

Hi Ankeret, and welcome to the Lenovo User Community!
I'm not sure how many eduroam users we have wandering around here...
...knowing nothing about it, I would say check that you have the latest network drivers for your T42. If you have, try reinstall them, then reinstall eduroam.
I'm assuming the system boots and the networking works on other networks, without the eduroam software installed?
Is there a help desk for eduroam?
The T42 is a ubiquitous and solid laptop, compatible with just about everything, and it's most likely you just have a setup issue. Your exact model type will help others help you further...
I don't work for Lenovo. I'm a crazy volunteer!

Nokia N8 eduroam conection

Hello.
I'm trying to follow some protocols to connect my new N8 to eduroam and it looks impossible.
It always give me a error to conect, but without any reason.
I don't know if it is a global n8 problem, if it is a eduroam problem or in last case Lund university problem.
Can someone help me ?
Regards

@NumanAkmal
Have you tried with Opera Mobile 11.1?
Happy to have helped forum with a Support Ratio = 42.5

Problems Connecting to eduroam.

Hello, i have a hughe problem, my macbook pro late 2007 cant connect to eduroam.
I have all the setting that i had in leopard, and now it only stays authenticating and dosen't authenticate.
Can anyone help me?
Compliments

I'm having the same issue on Eduroam in the UK. One workaround most people have been using here is to connect to an unsecured network and wait for an IP address then connect to Eduroam. Seems to work 100% of the time, but connecting to Eduroam fist time always fails.
We have an unsecured, walled garden network to register the MAC address. Nothing has to be registered, but it always seems to work.
That's definitely a SL issue as some people had no issues then, after upgrading, could not connect the next day. I've also had problems connecting the iPhone 3G, but I can't verify that it is the same problem, yet.
(WPA: Enterprise, PEAP + TTLS)
Message was edited by: Aetherium
Added protocols

Dhcp server won't admit my Arch Linux (though Win's have no problems)

1. Generally my dhcpcd works fine in every network (and always has, I have not changed anything substantial).
2. Currently I am in a network (for just a couple of weeks) in which it does not.
3. The network will ignore all my dhcp requests over both network devices, enp1s0 and wlp2s0 (ethernet and wifi)
4. When trying the same from Windows (dual boot), the dhcp client works brilliantly (i.e. the hardware is fine)
5. I can force entry into the cable network by simply assigning an IP address and setting netmask and gateway as was configured by dhcp when I tried from Windows
6. For wifi this does not work. More specifically it works for a brief moment if (and only if) I was connected from Windows immediately before and assign myself the same IP address (I can ping the gateway and also 8.8.8.8). After this moment the network apparently kicks me out (cannot ping anything any more, nothing answers). dhcpcd inform (dhcpcd -s <IP Adress>) does not fare better.
7. I tried changing some of the settings in dhcpcd.conf that have been given as reasons for similar problems in the forums, archwiki, or somewhere else, including exchanging 'duid' for 'clientid', and commenting out 'require dhcp_server_identifier'. Does not help. My dhcpcd.conf, see below.
8. dhclient does not work either.
What I want: Connect to the internet via wifi from Arch.
I guess this comes down to making the dhcp server believe my Arch was one of the Windowses it is used to. How do I do that?
I understand that dhcp does not involve clients revealing their operating systems to the servers; but some configurations are likely different between Arch and Windows. I am not used to working with Windows and have no idea how to access the dhcp client configuration settings there (if this is even possible) to get an idea what exactly is different. Here is my dhcpcd.conf - any ideas what exactly about it displeases the server so much or what I might change or add to make the server more pleasantly inclined?
dhcpcd.conf
hostname
clientid
#duid
persistent
option rapid_commit
option domain_name_servers, domain_name, domain_search, host_name
option classless_static_routes
option ntp_servers
#require dhcp_server_identifier
nohook lookup-hostname
noipv4ll
I would include the logs as well, but they are boring beyond belief, do not contain anything except for dhcpcd trying and failing with timeout.

Thanks, MoonSwan & ewaller,
MoonSwan wrote:Windows' IP address and network settings navigate to: Control Panel -> Network and Internet -> Network Connections -> Click on Device Here (WIFI or LAN) -> Properties and from there you should be able to see the settings you need to figure out what's going on in Windows.
Found that, There are a lot of "Advanced properties", for instance "Bandwidth Capacity" is set to "11b/g: 20MHz", "BSS Mode" is set to "802.11n Mode", "Fragmentation Threshold" to "2346" (whatever that may mean) ... etc. Unfortunately, I cant copy any of that; most of it also seems rather unimportant; also I left all this on its default setting when I followed the instructions on how to connect to this wifi on Windows.
However, here is some information I managed to squeeze out of the pathetic, pittyful Windows terminal which they call the "Comand Line"
C:\Windows\system32> ipconfig /all
<...>
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : <the network name>
Description . . . . . . . . . . . : <hardware description> 802.11b/g/n (2.4GHz)
Physical Address. . . . . . . . . : <the mac address>
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : <some ipv6> %13(Preferred)
IPv4 Address. . . . . . . . . . . : <the ipv4> (Preferred)
Subnet Mask . . . . . . . . . . . : <subnet mask>
Lease Obtained. . . . . . . . . . : Fri, 23. May 2014 19:47:10
Lease Expires . . . . . . . . . . : Fri, 23. May 2014 21:17:09
Default Gateway . . . . . . . . . : <gateway ip>
DHCP Server . . . . . . . . . . . : <some ip that is not part of the local subnet>
DHCPv6 IAID . . . . . . . . . . . : 319352249
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-9F-0F-D6-E0-DB-55-CF-26-6
DNS Servers . . . . . . . . . . . : <a few dns server ip's>
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : <some ipv6> (Preferred)
Link-local IPv6 Address . . . . . : <another ipv6> %12(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter 6TO4 Adapter:
Connection-specific DNS Suffix . : <the network name>
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : <some ipv6> (Preferred)
Default Gateway . . . . . . . . . : <another ipv6>
<yet another ipv6>
DNS Servers . . . . . . . . . . . : <the same ipv4 dns server ip's as above>
NetBIOS over Tcpip. . . . . . . . : Disabled
C:\Windows\system32> netsh wlan show all
Wireless System Information Summary
(Time: 23.05.2014 20:38:49 W. Europe Daylight Time)
=======================================================================
============================== SHOW DRIVERS ===========================
=======================================================================
Interface name: Wireless Network Connection
Driver : <hardware description> 802.11b/g/n (2.4GHz)
Vendor : Broadcom
Provider : Broadcom
Date : 21.01.2012
Version : 6.20.55.31
INF file : C:\Windows\INF\oem25.inf
Files : 5 total
C:\Windows\system32\DRIVERS\BCMWL664.SYS
C:\Windows\system32\bcmihvsrv64.dll
C:\Windows\system32\bcmihvui64.dll
C:\Windows\system32\drivers\vwifibus.sys
C:\Windows\system32\bcmwlcoi.dll
Type : Native Wi-Fi Driver
Radio types supported : 802.11n 802.11g 802.11b
FIPS 140-2 mode supported : Yes
Hosted network supported : Yes
Authentication and cipher supported in infrastructure mode:
Open None
Open WEP
Shared None
Shared WEP
WPA2-Enterprise TKIP
WPA2-Personal TKIP
WPA2-Enterprise CCMP
WPA2-Personal CCMP
WPA2-Enterprise Vendor defined
WPA2-Enterprise Vendor defined
Vendor defined Vendor defined
Vendor defined Vendor defined
Vendor defined TKIP
Vendor defined CCMP
Vendor defined Vendor defined
Vendor defined Vendor defined
WPA-Enterprise TKIP
WPA-Personal TKIP
WPA-Enterprise CCMP
WPA-Personal CCMP
Authentication and cipher supported in ad-hoc mode:
WPA2-Personal CCMP
Open None
Open WEP
IHV service present : Yes
IHV adapter OUI : [00 10 18], type: [00]
IHV extensibility DLL path: C:\Windows\System32\bcmihvsrv64.dll
IHV UI extensibility ClSID: {aaa6dee9-31b9-4f18-ab39-82ef9b06eb73}
IHV diagnostics CLSID : {00000000-0000-0000-0000-000000000000}
=======================================================================
============================= SHOW INTERFACES =========================
=======================================================================
There is 1 interface on the system:
Name : Wireless Network Connection
Description : 802.11b/g/n (2.4GHz)
GUID : 6d122ca5-cdc2-42d1-a1fb-3754098b19eb
Physical address : <the mac address>
State : connected
SSID : <ssid>
BSSID : <access point mac address>
Network type : Infrastructure
Radio type : 802.11n
Authentication : WPA2-Enterprise
Cipher : CCMP
Connection mode : Auto Connect
Channel : 1
Receive rate (Mbps) : 72
Transmit rate (Mbps) : 72
Signal : 83%
Profile : <ssid>
Hosted network status : Not available
=======================================================================
=========================== SHOW HOSTED NETWORK =======================
=======================================================================
Hosted network settings
Mode : Disallowed
Settings : <Not configured>
Hosted network status
Status : Not available
=======================================================================
============================= SHOW SETTINGS ===========================
=======================================================================
Wireless LAN settings
Show blocked networks in visible network list: No
Only use GP profiles on GP-configured networks: No
Hosted network mode allowed in WLAN service: No
Allow shared user credentials for network authentication: Yes
Block period: Not Configured.
Auto configuration logic is enabled on interface "Wireless Network Connection"
=======================================================================
============================== SHOW FILTERS ===========================
=======================================================================
Allow list on the system (group policy)
<None>
Allow list on the system (user)
<None>
Block list on the system (group policy)
<None>
Block list on the system (user)
<None>
=======================================================================
=========================== SHOW CREATEALLUSER ========================
=======================================================================
Everyone is allowed to create all user profiles.
=======================================================================
============================= SHOW PROFILES ===========================
=======================================================================
Profiles on interface Wireless Network Connection:
Group policy profiles (read only)
<None>
User profiles
All User Profile : <ssid>
<other profile names>
=======================================================================
========================== SHOW PROFILES NAME=* =======================
=======================================================================
Profile eduroam on interface Wireless Network Connection:
=======================================================================
Applied: All User Profile
Profile information
Version : 1
Type : Wireless LAN
Name : <ssid>
Control options :
Connection mode : Connect automatically
Network broadcast : Connect only if this network is broadcasting
AutoSwitch : Do not switch to other networks
Connectivity settings
Number of SSIDs : 1
SSID name : "<ssid>"
Network type : Infrastructure
Radio type : [ Any Radio Type ]
Vendor extension : Not present
Security settings
Authentication : WPA2-Enterprise
Cipher : CCMP
Security key : Absent
802.1X : Enabled
EAP type : Microsoft: Protected EAP (PEAP)
802.1X auth credential : Machine or user credential
Cache user information : Yes
<other profiles ...>
=======================================================================
======================= SHOW NETWORKS MODE=BSSID ======================
=======================================================================
Interface name : Wireless Network Connection
There are 4 networks currently visible.
SSID 1 : eduroam
Network type : Infrastructure
Authentication : WPA2-Enterprise
Encryption : CCMP
BSSID 1 : <other access point ssid>
Signal : 2%
Radio type : 802.11n
Channel : 11
Basic rates (Mbps) : 1 2 5.5 11
Other rates (Mbps) : 6 9 12 18 24 36 48 54
BSSID 2 : <other access point ssid>
Signal : 0%
Radio type : 802.11n
Channel : 11
Basic rates (Mbps) : 1 2 5.5 11
Other rates (Mbps) : 6 9 12 18 24 36 48 54
BSSID 3 : <access point ssid>
Signal : 87%
Radio type : 802.11n
Channel : 1
Basic rates (Mbps) : 1 2 5.5 11
Other rates (Mbps) : 6 9 12 18 24 36 48 54
BSSID 4 : <other access point ssid>
Signal : 0%
Radio type : 802.11n
Channel : 1
Basic rates (Mbps) : 1 2 5.5 11
Other rates (Mbps) : 6 9 12 18 24 36 48 54
SSID 2 : <...>
What I find odd is this "Taredo Tunneling Pseudo-Interface". As a matter of fact, I have not the slightest idea if this is happening inside this local Windows I have here or if this is something real in the network configuration (on the other side of the access point)... It apparently should tunnel IPv6 to IPv4 and/or vice versa. However, why would there be two connections over the same network interface (IPv6 and IPv4)...
What is odd as well is that the DHCP server is not part of the subnet my Windows is in. It just seems to announce IP, netmask, gateway to the Windows ... (the gateway is in the subnet). Could it be that the Linux dhcp client does not accept something like that. No, that's unlikely, right? dhcpcd -d should have reported this...
MoonSwan wrote:Btw, love the name,
Thanks. Likewise
MoonSwan wrote:it's nice to see such a name after seeing so many that are intentionally hurtful to others of any stripe in a rainbow.
Actually, I always felt that the Arch Forum is quite tolerant in this respect. (And so is reddit, but of course, you are right, there are places on the internet where you can run into a lot of assholes. Kind of like in the real world... Quite frustrating.)
ewaller wrote:I guess it could be a MAC problem. but I don't know.
Unlikely; on windows the mac address is the same.
ewaller wrote: Can you get to the router logs? Can you see if the router saw a solicitation?
no. and given their network configuration I don't suppose the IT people here would be very forthcoming if I asked them. Their helpdesk said that they couldn't help me since my laptop was not one of their computers.
ewaller wrote:Also, (just a sanity check) are you sure you are connected to the correct access point? But that does not make sense -- you said this happens on wired as well sad
Dang.
I am. It's WPA2 encrypted & I only have access data to this one wifi network. (To avoid confusing everyone with mentioning too many different things, I did not detail this in the original post. I am accessing it using wpa_supplicant running in a terminal; wpa_supplicant works fine says "connection succeeded" etc. So the problem is not in the WPA/ wifi-connection layer but really in the IP/dhcp layer.)
ewaller wrote:Is this a corporate environment? A school perhaps?
Yes, a university. They have someone working here who went through great lengths to make it difficult for people to connect to the internet.

Can't connect to Eduroam on my WP 8 Nokia Lumia 930

Hi!
So, I just got the new Lumia 930, which I am very happy with, however I can not seem to get it to connect to Eduroam at the university I work at. When I go to the page where I am suppose to 'join' or 'download' whatever I need, 'securew2', (using the phone)
it detects that I am using a Windown Phone, but it only just gives me settings to 'configure my device'. Such as:
SecurityType:WPA2-Enterprise
Encryption: AES
EAP Type: TTLS
Inner EAP Type: PAP
CA Certificate: UTN-USERFirst-Hardware, AddTrust etc..
When I then go into WiFi and click on Eduroam, I try to log in with my user-credentials. I can also look through a list of certificates but none of them seem to be the right one. The only choice I really get is the EAP-method, where I change it from PEAP
MA-CHAP v2 (which did not work) to TTLS. Then I am asked to verify that it is the right network, which it is - with the name of the university and everything - I click OK....and then there is a full stop. I only get a 'can't connect' message. Very frustrating.
I talked to the IT people at here, and they verified my user credentials, and told me that people with Windows Phones had trouble connecting to Eduroam.
As should be abundantly clear by now I am technologically challenged, so please help help help me fix this. If for no other reason then to silence my snickering, iPhone-loving colleagues.

Hello,
Did you find a solution for this issue?
I just bought a Nokia Lumia 735 and I have the same problem. Unable to connect the Eduroam network in my laboratory. It seem that I have to put an other certificate which is not on my device (from TERENA), and I did not find how to do it.
It is a bit disappointing to be blocked on such a new device. My previous phone, an old Iphone 3gs, was able to connect very easily...
Please help, or I will regret my choice to switch on Windows Phone (if I add the poor choice regarding the apps on the Store...).
Regards.

WIFI univercity TUHH (Eduroam)

Hi people,
I am now using Lumia 1520 and i get a problem with connection to my uni WLAN(eduroam) TUHH
After search i see this network, then I'm trying to login with my username and pass and its says that connection is not possible
I will leave a link for my uni wlan center, probably someone can give me advice how can i connect my device
https://www.tuhh.de/rzt/wlan/eduroam.html
Its on german, sorry but thats all i have.
Waiting for ur answers.

Please post your question here:
http://answers.microsoft.com/en-us/winphone
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Apple TV using eduroam.

We want to use the apple tv as an academic tool.
The fact is that all of us use an Apple device as a Lab Journal, so we want to have Apple tv in the lab.
As part of the university, our network is Eduroam, a secure, world-wide roaming access service. Would still be possible to use our Apple tv with that kind of network?
And second question, is it possible to do it with a HD beamer, and without connection to a TV?
Thank you very much in advance for your answers,
Tania

Sorry about that. My iPhone is landscape the apple tv mirrors the image horizontal. I can turn phone horizontal & Apple TV displays verticle. So my phone displays the correct orientation but the Apple tv is opposite of what it should be. It is not the other caller either. They can see correctly on their phone/iPad, they are not using Apple tv. Can use a iOS 7 device with my Apple TV and Apple tv works correctly. Not able to send picture at this time. Have also tried with 2 different Apple tv devices. Hope this enough detail that explains that the problem.

Upgrade to Mavericks make Eduroam (WPA Enterprise) intermittent wifi

After upgrade to Mavericks, my MacBook Pro can't stay connected to eduroam for at leas 2 min following, it's always falling.. Any help, and after update to 10.9.2 the stability have dropped considerably..
Any help please..

You're not alone. I have exactly the same wifi problem since the update to 10.9.2. I can't connect to eduroam or to my university wifi (WPA2 Enterprise). I have no IP adress assigned ! At the same time, I have no problem with my PC with Windows Seven ! I have the same problem with my iPhone (ios 7.0.6).
At home, my wifi is WPA2 Personnal and I have no problem nor with my Macbook, nor with my iPhone.
Thanks for your help.

[SOLVED] Gnome Epiphany 3.14 via eduroam, cannot load secure webpages

Hi
My problem is the following: everytime I try to load a secure webpage (https) in epiphany 3.14 the browser responds with "Oops! Unable to display this website." and "Peer failed to perform TLS handshake". Unsecure pages load normally. This problem only occurs when I am connected to the internet using eduroam (in other wireless networks the secure pages load normally). With other browsers all pages (secure and unsecure) load normally using eduroam.
Thanks,
Ricardo Fernandes
Last edited by r12624 (2014-10-28 22:06:02)

It seems that the problem disappeared, epiphany now works again. Here is the list of packages upgraded since the last post:
[2014-10-26 08:17] [PACMAN] upgraded accountsservice (0.6.38-1 -> 0.6.39-1)
[2014-10-26 08:17] [PACMAN] upgraded geoclue2 (2.1.8-2 -> 2.1.10-1)
[2014-10-26 08:17] [PACMAN] upgraded empathy (3.12.5-1 -> 3.12.7-1)
[2014-10-26 08:17] [PACMAN] upgraded firefox (33.0-2 -> 33.0.1-1)
[2014-10-26 08:17] [PACMAN] upgraded gtk3 (3.14.3-2 -> 3.14.4-1)
[2014-10-26 08:17] [PACMAN] upgraded gnome-calculator (3.14.0-1 -> 3.14.1-1)
[2014-10-26 08:17] [PACMAN] upgraded gnome-online-accounts (3.14.0-1 -> 3.14.1-1)
[2014-10-26 08:17] [PACMAN] upgraded upower (0.99.0-3 -> 0.99.1-2)
[2014-10-26 08:17] [PACMAN] upgraded gnome-settings-daemon (3.14.1-1 -> 3.14.1-2)
[2014-10-26 08:17] [PACMAN] upgraded gnome-control-center (3.14.1-1 -> 3.14.1-2)
[2014-10-26 08:17] [PACMAN] upgraded libtracker-sparql (1.2.2-2 -> 1.2.3-1)
[2014-10-26 08:17] [PACMAN] upgraded tracker (1.2.2-2 -> 1.2.3-1)
[2014-10-26 08:17] [PACMAN] upgraded gnome-documents (3.14.0-1 -> 3.14.1-1)
[2014-10-26 08:17] [PACMAN] upgraded libqmi (1.10.2-1 -> 1.10.4-1)
[2014-10-26 08:17] [PACMAN] upgraded mesa-dri (10.3.1-1 -> 10.3.2-1)
[2014-10-26 08:17] [PACMAN] upgraded mesa (10.3.1-1 -> 10.3.2-1)
[2014-10-26 08:17] [PACMAN] upgraded mesa-libgl (10.3.1-1 -> 10.3.2-1)
[2014-10-26 08:17] [PACMAN] upgraded libva (1.4.0-1 -> 1.4.1-1)
[2014-10-26 08:17] [PACMAN] upgraded libxml2 (2.9.1-5 -> 2.9.2-1)
[2014-10-26 08:17] [PACMAN] upgraded mutter (3.14.1-1 -> 3.14.1-2)
[2014-10-26 08:17] [PACMAN] upgraded neon (0.30.0-1 -> 0.30.1-1)
[2014-10-26 08:17] [PACMAN] upgraded tzdata (2014h-1 -> 2014i-1)
[2014-10-26 14:20] [PACMAN] upgraded webkitgtk (2.4.6-3 -> 2.4.7-1)

WLC 5508 Release 7.4.100.0 RADIUS PROBLEM

Hi,
Previously I was using 7.0.116.0 and there was no problem on Radius Authentication.
Client uses secure V2
After upgrading 7.4.100.0 Radius Authentication Successfull,
but Secure V2 continuously opens login page
Thanks

(Cisco Controller) >show wlan 2
WLAN Identifier.................................. 2
Profile Name..................................... Eduroam
Network Name (SSID).............................. eduroam
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Number of Active Clients......................... 48
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ eduroam_1
Multicast Interface.............................. Not Configured
--More-- or (q)uit
WLAN ACL......................................... unconfigured
DHCP Server...................................... 10.0.15.1
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver (best effort)
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ 193.140.164.5 1812
--More-- or (q)uit
   Accounting.................................... Disabled
   Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
   802.11 Authentication:........................ Open System
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Disabled
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Disabled
         AES Cipher.............................. Enabled
                                                               Auth Key Management
         802.1x.................................. Enabled
         PSK..................................... Disabled
         CCKM.................................... Disabled
         FT(802.11r)............................. Disabled
         FT-PSK(802.11r)......................... Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
CCKM tsf Tolerance............................... 1000
--More-- or (q)uit
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   H-REAP Local Switching........................ Disabled
   H-REAP Local Authentication................... Disabled
   H-REAP Learn IP Address....................... Enabled
   Client MFP.................................... Optional
   Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Mobility Anchor List
WLAN ID     IP Address            Status

[solved] eduroam with netctl?

Hello, i'm trying to install arch on my school laptop. (I installed linux (not arch) before: it ain't a problem.)
Here they use a network called Airborne. It has wpa2-enterprise security.
(Here is a picture of the network configration in windows)
To install netctl I just placed the netctl and openresolv packages in my windows partition and installed them with pacman -U during installation.
My question is: how can I connect to wpa2-enterprise with netctl?
Last edited by mid-kid (2013-06-21 13:27:14)

I found setting it up with wpa_supplicant too complicated.
I used archiso on my other pc to make an iso including wicd and this config: https://wiki.archlinux.org/index.php/Wi … _with_wicd
Thanks for the help anyway!
EDIT: It looks like somebody made it work with netctl: https://wiki.archlinux.org/index.php/Netctl#Eduroam
I haven't tried it though.
Last edited by mid-kid (2013-06-21 13:26:06)

X6 - problem with 802.1x wlan

Hi, finally my university has joined eduroam, they use EAP-PEAP and EAP-MSCHAPv2. I have the right Authorithy Cert installen in the mobile. However, i cannt connect. Either the X6 shows something like "Error: Wlan not found" or "EAP_PEAP: Authentification failed" Is there anything i can try? Non-802.1x-wlans work without problems.
greetings malte

Hello,
thanks for your link. Of course I will read. CiscoTac think that we have bug CSCtq32145 and we are working in this way.
Regards.

Serious problem with Safari

Sometimes (after upgrading to SL 10.6.3) when I start Safari and open some page, it shows the wheel, the display sometimes flash (sorry, not sure the correct therm - maybe blinking?) and I can not do anything. So I have to turn down the macbook by pressing power button for 10 sec.
I§ve tried to take some picture of it. You can see some scratches on left bottom corner of Safari. I had just iPhone 3G with myself, so the pictures are not so great, but you can see it there
http://gallery.me.com/jakudo#100169
What can I do with it? How can I fix it?

Thanks for idea, however, I don't think this is part of the problem.
Eduroam or *.cvut.cz is network in our university. When I connect to the network (LAN or Wi-Fi), I have to sign in with my university name and password and the answer for your question - no it is not happening every time I connect. I connect my computer to that network almost every day and it happen just sometimes. Actually the strange thing happened also at home, where I don't need to sign in.
Just few minutes ago, Safari freeze again (for about 2 minutes) and than kept working correctly. The console show this:
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:45 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:45 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 9:59:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 09:59:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:06 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:06 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:06 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:06 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:46 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:46 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:00:47 AM [0x0-0x15015].com.apple.Safari[162] Sat Apr 24 10:00:47 jakudo.local Safari[162] <Error>: unknown error code: invalid drawable
4/24/10 10:01:23 AM com.apple.WebKit.PluginAgent[200] Debugger() was called!

Problems authentication school network

Hi,
At the moment I'm unable to connect to the school network with Arch Linux.
If using Windows and/or Android, I can connect without any issues.
The school uses the following security (authentication)-method:
- WPA2 Enterprise
- PEAP
- MSCHAPv2
- No certificate (they said it's not needed)
- A global username/password
The school should support it (at least Ubuntu).
There is also an eduroam network available, but also unable to login to this network.
I also tried the code (wiki) for eduroam, but this didn't work either.
I can connect, but I'm getting a message that the authentication failed with wicd & NetworkManager.
Has it something to do with the certificate? I had this problem somewhere else, but I needed the certificate of the network before I could connect to it properly.
Should it be possible to export the Android settings somewhere and port this to Arch? Has someone maybe an idea to solve this?
I already searched on the forums, but most of them got it working, but I haven't found any solution yet. Maybe I'm looking at the wrong info.
Thanks!

Thanks for the suggestion orschiro , unfortunately none of them work.
I'm using USB-tether to share the WiFi-connection, but it is a bit strange it connects correct with Android, but not with Arch Linux.
Maybe I'm missing something. :S
For the record, I have the same error on both the own school network and eduroam.
Last edited by beta990 (2014-02-11 19:04:38)

10.6.2 & Eduroam problem

Similar Messages

Maybe you are looking for