10.6.2 Restart Fails

Things on my Mac Pro and Macbook Pro have been basically OK since the 10.6.2 update. However, I've noticed on the Mac Pro that restart no longer works. It will shut down the machine and then just sit there. After a few minutes I have to hold in the button and cold start it. Once started all seems to work pretty well.
I have seen one other oddity. I had the mouse pointed at the spotlight magnifying glass while it was searching for something and the machine just hung. Never seen that before. I was forced to be brutal and cold start with fingers crossed. All seems well but I'm not used to freezes since I left windows a few years back!
Anyone have any ideas about the restart problems?
goose

Thanks for the replies. I ran the permissions repair but only saw some browser plugin's fixed up.
After that I restarted the Mac Pro. The machine shut down, I heard the "ta-da" music as if it were going to reboot and then nothing. So, I started booting my Macbook Pro laptop to log in here and get the SMC reset instructions and several minutes later the Mac Pro suddenly came alive again! I've read somewhere that this last system update sometimes caused a one time long blue screen. In my case it was a long "black" screen! After it reached the login screen I rebooted yet again and the time to login screen was much more normal. Apparently there is some self healing going on that just requires waiting about 5 minutes. We'll see if it holds up.
goose

Similar Messages

OWB 9.0.4 ability to restart failed ETL jobs ?

Hi all,
Does OWB 9.0.4 provide the ability to restart failed ETL jobs ?
For example in a Module of 20 mappings, 15 mappings have completed with success. Mapping 16 fails and hence OWF exists with failure. In the event the problem is rectified can OWB restart at mapping 16 rather than from mapping 1.
Regards
Nick

Nick,
At the moment there is no way to explicitly start from mapping 16, unless there are specific conditions that caused your mapping to fail.
For example, if you have enabled resumable statements on the database level and your mapping would run into a situation where these can be leveraged (e.g. you run out of tablespace) then you could resume the execution and the process flow would continue.
Also, if there is an external situation that causes your execution to fail (e.g. mapping does not exist) then you can use Workflow's restart capabilities to resume.
If however there is a data reason why a mapping fails, then you will have to manually intervene and resolve the process. If your mappings have been defined in such a way that only changed data is being captured (may be a good idea after all...) then you could just rerun the entire process flow. In other cases... I am afraid you'll have to go in manually to execute the individual mappings and fix the process flow as such.
Mark.

MacPro3,1 Restart Fails along with freezes up during activity

My MacPro3,1 restart fails as well as freezes up during some processes like Finder.app. When it freezes up during with Finder.app and I do a Force Quit Relaunch it never relaunches it just quits and never returns. Clean install.

You have posted three different symptoms in three different posts. In isolation, they do not lead anywhere in particular.
But taken together, I think it is worth investigating graphics card failure.
Several non-graphics-dependent features are discernible:
• The Caps lock light on the keyboard is under software control. The software is not completely dead if the caps lock light is changeable.
• Control-eject produces this familiar dialog box:
Any key other than R for Restart, S for Sleep, Esc for Cancel, or Return (to take the default and Shutdown) will produce a SysBeep sound IF the software is still running.
> So, if the software is still running when your described problems occur, you can conclude that your Graphics card is the source of your not seeing it continue to work.

DB 7.8 Restart fails with SQL error -9407, unexpected error 3

Hello,
MaxDB Instance (7.8.01.18) fails to restart with the error
"SQL error -9407 System error: unexpected error 3
Internal errorcode 6433 "system_error" 20017, Restart Filesystem failed with
'System error unexpected error'
9, File directory restart failed; error '3'
31, Error linking entry to parent; file no '000000004066',
parent file no '000000000000000000033D',
file type 'IndexFile', error '11'
We had the problem "[-8]: Execution failed, parse again" with one table,
then we tried to restart the database. Now it doesn't come up any more.
Is there another possibility instead of a recovery?
Greetings
Ulrich

Your problem description sounds very similar to the following error:
PTS1237652:
"Appearance:
Restart fails with file directory corruption:
31,Error linking entry to parent; file no 'xxx', parent file no 'yyy', file type 'IndexFile', error '11'
Preconditions and circumstances:
During a recreate index operation the index was dropped and recreated manually.
Workaround:
None. The system must be recovered to the time just before the index was recreated."
Please note that this is one of those issues that has only been fixed with 7.8.02. 7.8.02 is currently in customer testing, if anyone wants to join, just open a CSS message and test this version before we make it generally available for download.
Best regards,
Thorsten

Like to know how to restart failes patch

Dear all
If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...
Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....
Regards
Gopinath

Hi,
If any patch fail to apply patch due some reason's how to restart... From some web site i seen that there is option called adctrl is use for restart failed worker.. Now we assume like if the patch completed around 90 % and it taken around 2 hours for that.. Now the remaining 10% only wanna to execute which is taken only ten min to complete now what i wanna to do complete with out start the process from beginning...Please see the link
http://beginapps.blogspot.com/2008/04/how-to-apply-11i-patch-when-adpatch-is.html
The above link talks about 11i. It is the same for R12 except the location of restart files in R12 is in $APPL_TOP/admin/<SID>
Mean while i like to know the difference between adctrl and autopatch restart (i.e the purpose of $APPL_TOP/admin/<SID>/restart ).....Please read the documentation
http://docs.oracle.com/cd/B34956_01/current/acrobat/r12adutil.pdf
Breifly
Using adctrl you can control the workers, like quitting them, restarting them checking the status.
The purpose of restart directory is to store the last status of the workers and other information will be needed if patch needs to be restarted next time.
Thanks

Snow Leopard - very slow restart / reboot and Boot Camp restart fail

Hi
After Snow Leopard installation on my Macbook Pro I have a very slow restart. I logged this immediately after install and waited till 10.6.1 was issued and installed but still have the same problems. Hope some one can help.
For an normal restart or reboot I have the grey screen for about 25 secs and then the blue screen hangs for about 2 mins 30 secs before loading desktop. This is longer than Leopard and clearly not what Snow Leopard is meant to be. I have installed on an iMac as well and can see the new normal fast boot.
I also have Windows on it's own partition and use in Boot Camp. I have used this successfully under Leopard.
When I restart from Windows using the Start button and restart, Windows shuts down and then the mac starts up but gets stuck indefinitely on the blue screen. I have waited up to 25 mins then forced a shut down.
However if I restart from Windows using the Boot Camp icon in the taskbar and choose the restart from MacOSX it shuts down windows and restarts the mac in record time!! about 25 secs grey screen and 25 secs blue screen. I can't get this in normal mac mode! - Bizarre.
I have run Disk Utility, repaired permissions, run Tech Tool, Onyx, reset PRAM, deleted startup items plists and removed startup items from System Preferences Account.
I have monitored the Console app for all the startup conditions noted above and will post below. In the logs of the normal mac reboot you can see something to do with Security Agent taking over 2 mins to load. Maybe that is a clue, but I don't understand these messages. Please note that the iStatsmenu app was installed after snow leopard and I had these slow startups before it's installation.
If anyone technical can understand what the **** is going on here I would really appreciate your feedback.
Regards
Eric
system.log
Sep 13 18:09:01 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 13 18:09:08 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
Sep 13 18:09:09 localhost pcscd[28]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
Sep 13 18:09:17: --- last message repeated 1 time ---
Sep 13 18:09:17 localhost configd[15]: network configuration changed.
Sep 13 18:09:17 eric-lawrences-MBP-2 configd[15]: setting hostname to "eric-lawrences-MBP-2.local"
Sep 13 18:09:17 eric-lawrences-MBP-2 bootlog[60]: BOOT_TIME: 1252829340 0
Sep 13 18:09:18 eric-lawrences-MBP-2 fseventsd[54]: could not open <</Volumes/ERICGLPC/.fseventsd/fseventsd-uuid>> (No such file or directory)
Sep 13 18:09:18 eric-lawrences-MBP-2 fseventsd[54]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 493B2D00-47B9-4820-96FB-EF447F07CCDA
Sep 13 18:09:20 eric-lawrences-MBP-2 com.apple.usbmuxd[44]: usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
Sep 13 18:09:20 eric-lawrences-MBP-2 sudo[78]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 13 18:09:21 eric-lawrences-MBP-2 blued[61]: Apple Bluetooth daemon started
Sep 13 18:09:21 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50]: Login Window Application Started
Sep 13 18:09:24 eric-lawrences-MBP-2 loginwindow[50]: Login Window Started Security Agent
Sep 13 18:09:25 eric-lawrences-MBP-2 iStatLocalDaemon[66]: Waiting for connections on port 5204.
Sep 13 18:09:27 eric-lawrences-MBP-2 mDNSResponder[17]: SIGHUP: Purge cache
Sep 13 18:09:31 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 13 18:11:00 eric-lawrences-MBP-2 loginwindow[50]: Login Window - Returned from Security Agent
Sep 13 18:11:00 eric-lawrences-MBP-2 loginwindow[50]: USER_PROCESS: 50 console
Sep 13 18:11:01 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[121] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Sep 13 18:11:10 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[121] (com.apple.Kerberos.renew.plist[137]): Exited with exit code: 1
Sep 13 18:11:11 eric-lawrences-MBP-2 ServerScanner[134]: Not scanning because node /Active Directory/All Domains is in searchPath
Sep 13 18:11:27 eric-lawrences-MBP-2 com.apple.WindowServer[85]: Sun Sep 13 18:11:27 eric-lawrences-MBP-2.local WindowServer[85] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sep 13 18:11:27 eric-lawrences-MBP-2 WindowServer[85]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sep 13 18:11:29 eric-lawrences-MBP-2 SystemUIServer[126]: MenuCracker 2.0 (/Library/Application Support/iStat local/extras/MenuCracker.menu)\n See http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menu extras. Ignore the failure message that follows.
Sep 13 18:11:29 eric-lawrences-MBP-2 SystemUIServer[126]: failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded)
Sep 13 18:11:29 eric-lawrences-MBP-2 SystemUIServer[126]: MenuCracker: Allowing "iStatMenusDateAndTimes".
Sep 13 18:11:36 eric-lawrences-MBP-2 SystemUIServer[126]: MenuCracker: Allowing "iStatMenusNetwork".
secure.log
Sep 13 18:09:08 localhost com.apple.SecurityServer[23]: Session 0x5fbff962 created
Sep 13 18:09:09 localhost com.apple.SecurityServer[23]: Entering service
Sep 13 18:09:17 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'config.modify.com.apple.CoreRAID.admin' by client '/System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/Resources/Core RAIDServer' for authorization created by '/System/Library/PrivateFrameworks/CoreRAID.framework/Versions/A/Resources/Core RAIDServer'
Sep 13 18:09:24 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Session 0x236025 created
Sep 13 18:09:24 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Session 0x236025 attributes 0x30
Sep 13 18:09:24 eric-lawrences-MBP-2 loginwindow[50]: Login Window Started Security Agent
Sep 13 18:09:25 eric-lawrences-MBP-2 SecurityAgent[103]: User info context values set for ericgl
Sep 13 18:09:26 eric-lawrences-MBP-2 SecurityAgent[103]: Login Window login proceeding
Sep 13 18:11:00 eric-lawrences-MBP-2 SecurityAgent[103]: Login Window done
Sep 13 18:11:00 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'system.login.console' by client '/System/Library/CoreServices/loginwindow.app' for authorization created by '/System/Library/CoreServices/loginwindow.app'
Sep 13 18:11:00 eric-lawrences-MBP-2 loginwindow[50]: Login Window - Returned from Security Agent
Sep 13 18:11:01 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'system.login.done' by client '/System/Library/CoreServices/loginwindow.app' for authorization created by '/System/Library/CoreServices/loginwindow.app'
Sep 13 18:11:09 eric-lawrences-MBP-2 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[145]: Starting up.
Sep 13 18:11:14 eric-lawrences-MBP-2 com.apple.SecurityServer[23]: Succeeded authorizing right 'system.print.admin' by client '/System/Library/Printers/Libraries/makequeuesagent' for authorization created by '/System/Library/Printers/Libraries/makequeuesagent'
Sep 13 18:11:44: --- last message repeated 1 time ---
all messages
13/09/09 6:09:07 PM kernel npvhash=4095
13/09/09 6:09:07 PM kernel PAE enabled
13/09/09 6:09:07 PM kernel 64 bit mode enabled
13/09/09 6:09:07 PM kernel Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
13/09/09 6:09:07 PM kernel vmpagebootstrap: 508922 free pages and 15366 wired pages
13/09/09 6:09:07 PM kernel standard timeslicing quantum is 10000 us
13/09/09 6:09:07 PM kernel migtable_maxdispl = 73
13/09/09 6:09:07 PM kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
13/09/09 6:09:07 PM kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
13/09/09 6:09:07 PM kernel calling mpopolicyinit for TMSafetyNet
13/09/09 6:09:07 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
13/09/09 6:09:07 PM kernel calling mpopolicyinit for Quarantine
13/09/09 6:09:07 PM kernel Security policy loaded: Quarantine policy (Quarantine)
13/09/09 6:09:07 PM kernel calling mpopolicyinit for Sandbox
13/09/09 6:09:07 PM kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
13/09/09 6:09:07 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
13/09/09 6:09:07 PM kernel The Regents of the University of California. All rights reserved.
13/09/09 6:09:07 PM kernel MAC Framework successfully initialized
13/09/09 6:09:07 PM kernel using 10485 buffer headers and 4096 cluster IO buffer headers
13/09/09 6:09:07 PM kernel IOAPIC: Version 0x20 Vectors 64:87
13/09/09 6:09:07 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
13/09/09 6:09:07 PM kernel mbinit: done (64 MB memory set for mbuf pool)
13/09/09 6:09:07 PM kernel rooting via boot-uuid from /chosen: DA111E02-C1F5-3C6F-AB90-AD27A5B932BE
13/09/09 6:09:07 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
13/09/09 6:09:07 PM kernel com.apple.AppleFSCompressionTypeZlib load succeeded
13/09/09 6:09:07 PM kernel AppleIntelCPUPowerManagementClient: ready
13/09/09 6:09:07 PM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 0017f2fffe7f970e; max speed s800.
13/09/09 6:09:07 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/FUJITSU MHW2120BH Media/IOGUIDPartitionScheme/Merged_Untitled@2
13/09/09 6:09:07 PM kernel BSD root: disk0s2, major 14, minor 2
13/09/09 6:09:07 PM kernel USBMSC Identifier (non-unique): MY66AB92R404J7 0x3f0 0x5711 0x100
13/09/09 6:09:07 PM kernel USBMSC Identifier (non-unique): 01974248FFFF 0x59f 0x951 0x0
13/09/09 6:09:07 PM kernel [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
13/09/09 6:09:07 PM kernel [Bluetooth::CSRHIDTransition] transition complete.
13/09/09 6:09:07 PM kernel CSRUSBBluetoothHCIController::setupHardware super returned 0
13/09/09 6:09:07 PM kernel AppleIntelCPUPowerManagement: initialization complete
13/09/09 6:09:07 PM kernel AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
13/09/09 6:09:07 PM kernel AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RXMAXLE 1024, TXMAXLE 768, STMAXLE 3328
13/09/09 6:09:01 PM com.apple.launchd[1] * launchd[1] has started up. *
13/09/09 6:09:08 PM kernel yukon: Ethernet address 00:16:cb:a1:8f:b7
13/09/09 6:09:08 PM kernel systemShutdown false
13/09/09 6:09:08 PM mDNSResponder[17] mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
13/09/09 6:09:08 PM com.apple.SecurityServer[23] Session 0x5fbff962 created
13/09/09 6:09:09 PM com.apple.SecurityServer[23] Entering service
13/09/09 6:09:10 PM kernel Previous Shutdown Cause: 5
13/09/09 6:09:10 PM kernel DSMOS has arrived
13/09/09 6:09:10 PM kernel Atheros: mac 12.2 phy 8.1 radio 12.0
13/09/09 6:09:17 PM configd[15] network configuration changed.
13/09/09 6:09:17 PM configd[15] setting hostname to "eric-lawrences-MBP-2.local"
13/09/09 6:09:17 PM kernel AirPort_AthrFusion: Ethernet address 00:17:f2:e6:a8:d1
13/09/09 6:09:17 PM kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
13/09/09 6:09:17 PM bootlog[60] BOOT_TIME: 1252829340 0
13/09/09 6:09:18 PM fseventsd[54] could not open <</Volumes/ERICGLPC/.fseventsd/fseventsd-uuid>> (No such file or directory)
13/09/09 6:09:18 PM fseventsd[54] log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 493B2D00-47B9-4820-96FB-EF447F07CCDA
13/09/09 6:09:19 PM kernel AirPort: Link Down on en1. Reason 1 (Unspecified).
13/09/09 6:09:19 PM kernel AirPort: Link Up on en1
13/09/09 6:09:20 PM kernel AirPort: RSN handshake complete on en1
13/09/09 6:09:20 PM com.apple.usbmuxd[44] usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
13/09/09 6:09:20 PM sudo[78] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
13/09/09 6:09:21 PM blued[61] Apple Bluetooth daemon started
13/09/09 6:09:21 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[50] Login Window Application Started
13/09/09 6:09:22 PM kernel Warning - com.apple.driver.InternalModemSupport declares no kernel dependencies; using com.apple.kernel.6.0.
13/09/09 6:09:23 PM kernel IOBluetoothBNEPDriver: Ethernet address 00:17:f2:9f:b7:a5
13/09/09 6:09:24 PM com.apple.SecurityServer[23] Session 0x236025 created
13/09/09 6:09:24 PM com.apple.SecurityServer[23] Session 0x236025 attributes 0x30
13/09/09 6:09:24 PM loginwindow[50] Login Window Started Security Agent
13/09/09 6:09:25 PM Firewall[100] krb5kdc is listening from :::88 proto=6
13/09/09 6:09:25 PM Firewall[100] krb5kdc is listening from 0.0.0.0:88 proto=6
13/09/09 6:09:25 PM Firewall[100] iStatLocalDaemon is listening from 0.0.0.0:5204 proto=6
13/09/09 6:09:25 PM Firewall[100] iStatLocalDaemon is listening from ::ffff:0.0.0.0:5204 proto=6
13/09/09 6:09:25 PM SecurityAgent[103] User info context values set for ericgl
13/09/09 6:09:26 PM SecurityAgent[103] Login Window login proceeding
13/09/09 6:09:27 PM mDNSResponder[17] SIGHUP: Purge cache
13/09/09 6:09:31 PM Firewall[100] krb5kdc is listening from :::88 proto=6
13/09/09 6:09:31 PM Firewall[100] krb5kdc is listening from 0.0.0.0:88 proto=6
13/09/09 6:09:31 PM configd[15] network configuration changed.
13/09/09 6:09:35 PM Firewall[100] krb5kdc is listening from :::88 proto=6
13/09/09 6:09:35 PM Firewall[100] krb5kdc is listening from 0.0.0.0:88 proto=6
13/09/09 6:11:00 PM SecurityAgent[103] Login Window done
13/09/09 6:11:00 PM loginwindow[50] Login Window - Returned from Security Agent
13/09/09 6:11:00 PM loginwindow[50] USER_PROCESS: 50 console
13/09/09 6:11:01 PM com.apple.launchd.peruser.501[121] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
13/09/09 6:11:10 PM com.apple.launchd.peruser.501[121] (com.apple.Kerberos.renew.plist[137]) Exited with exit code: 1
13/09/09 6:11:11 PM ServerScanner[134] Not scanning because node /Active Directory/All Domains is in searchPath
13/09/09 6:11:27 PM com.apple.WindowServer[85] Sun Sep 13 18:11:27 eric-lawrences-MBP-2.local WindowServer[85] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
13/09/09 6:11:27 PM WindowServer[85] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
13/09/09 6:11:29 PM SystemUIServer[126] MenuCracker 2.0 (/Library/Application Support/iStat local/extras/MenuCracker.menu)
See http://sourceforge.net/projects/menucracker
MenuCracker is now loaded. Ready to accept new menu extras. Ignore the failure message that follows.
13/09/09 6:11:29 PM SystemUIServer[126] failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded)
13/09/09 6:11:29 PM SystemUIServer[126] MenuCracker: Allowing "iStatMenusDateAndTimes".
13/09/09 6:11:36 PM SystemUIServer[126] MenuCracker: Allowing "iStatMenusNetwork".
failed reboot from windows - note date and time wrong
Sep 13 19:00:10 eric-lawrences-MBP-2 sudo[200]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 13 19:00:10 eric-lawrences-MBP-2 WindowServer[85]: bootstraplookip failed: Unknown service name
Sep 14 05:26:46 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 14 05:26:53 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
Sep 14 05:26:54 localhost pcscd[28]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
Sep 14 05:27:02: --- last message repeated 1 time ---
Sep 14 05:27:02 localhost configd[14]: network configuration changed.
Sep 14 05:27:02 eric-lawrences-MBP-2 configd[14]: setting hostname to "eric-lawrences-MBP-2.local"
Sep 14 05:27:02 eric-lawrences-MBP-2 bootlog[62]: BOOT_TIME: 1252870005 0
Sep 14 05:27:03 eric-lawrences-MBP-2 fseventsd[56]: checkvol_last_modtime:XXX failed to get mount time (25; &mount_time == 0x1000b5358)
Sep 14 05:27:03 eric-lawrences-MBP-2 fseventsd[56]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: 1C45E673-8EEA-4ACF-B0F2-BAE1FB843D2B
Sep 14 05:27:05 eric-lawrences-MBP-2 com.apple.usbmuxd[46]: usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
Sep 14 05:27:05 eric-lawrences-MBP-2 sudo[82]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 14 05:27:06 eric-lawrences-MBP-2 blued[63]: Apple Bluetooth daemon started
Sep 14 05:27:06 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[52]: Login Window Application Started
Sep 14 05:27:11 eric-lawrences-MBP-2 iStatLocalDaemon[68]: Waiting for connections on port 5204.
Sep 14 05:27:11 eric-lawrences-MBP-2 configd[14]: network configuration changed.
Sep 14 05:27:12 eric-lawrences-MBP-2 mDNSResponder[18]: SIGHUP: Purge cache
Sep 14 05:27:12 eric-lawrences-MBP-2 loginwindow[52]: Login Window Started Security Agent
Sep 13 19:33:18 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 13 19:33:25 localhost DirectoryService[11]: Improper shutdown detected
Sep 13 19:33:39 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
fast reboot from boot camp icon in Windows - note date and time wrong
Sep 14 05:46:42 localhost com.apple.launchd[1]: * launchd[1] has started up. *
Sep 14 05:46:53 localhost mDNSResponder[18]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
Sep 14 05:46:53 localhost pcscd[31]: Non-smartcard device launched pcscd [Vendor: 0X3F0, Product: 0X5711]
Sep 14 05:46:54: --- last message repeated 1 time ---
Sep 14 05:46:54 localhost configd[15]: network configuration changed.
Sep 14 05:46:54 eric-lawrences-MBP-2 configd[15]: setting hostname to "eric-lawrences-MBP-2.local"
Sep 14 05:46:56 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 14 05:46:57 eric-lawrences-MBP-2 bootlog[65]: BOOT_TIME: 1252871201 0
Sep 14 05:46:58 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 14 05:47:01 eric-lawrences-MBP-2 fseventsd[59]: could not open <</Volumes/ERICGLPC/.fseventsd/fseventsd-uuid>> (No such file or directory)
Sep 14 05:47:01 eric-lawrences-MBP-2 fseventsd[59]: log dir: /Volumes/ERICGLPC/.fseventsd getting new uuid: CA5F549C-7E51-4D0B-BEB6-7B91A7544AE2
Sep 14 05:47:01 eric-lawrences-MBP-2 sudo[82]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/Library/StartupItems/HWNetMgr/HWNetCfg
Sep 14 05:47:03 eric-lawrences-MBP-2 com.apple.usbmuxd[49]: usbmuxd-176 built for iTunesNine on Jul 20 2009 at 13:06:53, running 32 bit
Sep 14 05:47:03 eric-lawrences-MBP-2 blued[66]: Apple Bluetooth daemon started
Sep 14 05:47:04 eric-lawrences-MBP-2 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[55]: Login Window Application Started
Sep 14 05:47:09 eric-lawrences-MBP-2 iStatLocalDaemon[71]: Waiting for connections on port 5204.
Sep 14 05:47:09 eric-lawrences-MBP-2 mDNSResponder[18]: SIGHUP: Purge cache
Sep 14 05:47:10 eric-lawrences-MBP-2 configd[15]: network configuration changed.
Sep 14 05:47:10 eric-lawrences-MBP-2 loginwindow[55]: Login Window Started Security Agent
Sep 14 05:47:11 eric-lawrences-MBP-2 loginwindow[55]: Login Window - Returned from Security Agent
Sep 14 05:47:11 eric-lawrences-MBP-2 loginwindow[55]: USER_PROCESS: 55 console
Sep 14 05:47:11 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[109] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Sep 13 19:47:17 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[109] (com.apple.AddressBook.abd): The following job tried to hijack the service "com.apple.AddressBook.abd" from this job: [0x0-0x5005].com.apple.AddressBook.abd
Sep 13 19:47:24 eric-lawrences-MBP-2 com.apple.launchd.peruser.501[109] (com.apple.Kerberos.renew.plist[131]): Exited with exit code: 1
Sep 13 19:47:24 eric-lawrences-MBP-2 ServerScanner[128]: Not scanning because node /Active Directory/All Domains is in searchPath
Sep 13 19:47:38 eric-lawrences-MBP-2 SystemUIServer[114]: MenuCracker 2.0 (/Library/Application Support/iStat local/extras/MenuCracker.menu)\n See http://sourceforge.net/projects/menucracker\n MenuCracker is now loaded. Ready to accept new menu extras. Ignore the failure message that follows.
Sep 13 19:47:38 eric-lawrences-MBP-2 SystemUIServer[114]: failed to instantiate and get the principal class of bundle: NSBundle </Library/Application Support/iStat local/extras/MenuCracker.menu> (loaded)
Sep 13 19:48:03 eric-lawrences-MBP-2 WindowServer[85]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Sep 13 19:48:03 eric-lawrences-MBP-2 com.apple.WindowServer[85]: Sun Sep 13 19:48:03 eric-lawrences-MBP-2.local WindowServer[85] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Hi guys
Thanks for your contributions. I have made little progress on this issue since posting.
Just as added info, I did a re-install of Snow leopard from install DVD and upgrade again to 10.6.1 and no change to the startup behaviours. Same pattern as before, although the first restart was fast and probably how it is meant to be, then the slow ones reappeared.
I also had a thought that somehow it may be related to the nominated startup disk. There were posts on other boards about similar issues with Leopard where the hanging start was found to be related to the computer not knowing which startup disk to use. I thought maybe as it works when using the boot camp icon from Windows but not the restart button, it may be related, but in OSX and Windows both are set to startup in OSX on HD. So no further joy.
Maybe someone else will come along who can understand the Console logs. Why does the loginwindow and Security Agent take so long?
Do you guys have any clues from your Console system logs? Does yours hang on loginwindow?
The fact that there are so few people with the same problem suggests to me that there is a third party device/preference/ hidden file somewhere that is having an effect and it's not an Apple issue.
I am getting close to wiping the hard drive and starting again....but live in hope.
Cheers

Please Help, After Kernel panic restart failed- apple swirl(6 hrs), SafeMode-failed, SUMode-sucess. Could not unmount disk to erase. Repair permissions-multiple fail errors:unable to set permissions on... unable to set owner and group...

Please Help, I deleted an account that was the same name as the administrator but was not the administrator. Also a samsung galaxy s phone was charging through the usb port.
I closed out a program and got a message that the temp file could not be stored/saved.
Then a Kernel panic message occurred and restart was necessary.
The restart resulted in the screen with the apple logo and a continous swirl for 6+hrs,
Attempted Safe Mode start up, unsuccessful,
Single User Mode-sucess.
Ran $ fsck_hfs -rfd /dev/disk0s2 Ran several times repairs made with one which remained. something about a node.
No change in start up attempts
Started with install CD matching current OS 10.6
Ran Disk Utility Repair Permissions resulting in multiple errors:
One line/error
Warning: SUID file /////Ardagent has been modified and will not be repaired
144 lines/errors of this type of series of lines
Group permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
permissions differ on...should be drwxr-xr-x, they are -rw-r--r-- .
unable to set owner and group...error 22: Invalid Argument
unable to set permissions on...error 22: Invalid Argument
Ran Repair Disk, result:
Error: Could not unmount disk (in red)
Ran Verify Disk, result:
The volume HD appears to be ok (in green)
Next I attempted to erase the dist to start from scratch since I have data backed up on time machine.
Error message box
Volume Erase failed
Volume Erase failed with error:
Could not unmount disk
I am looking to solve without buying DiskWarrior unless only resort.

So it looks like solved it for now I will update later. What I did was after starting from the install cd for the 10.6 system I ran from terminal ran:
diskutil disablejournaling /dev/disk0s2
diskutil disableownership /dev/disk0s2
diskutil repairPermissions /dev/disk0s2
then i closed terminal and then when to disk utility and chose to repair disk with results all was fine. Then ran repair permissions and got similar results from terminal function next I erased disk and then chose to restore from time machine and it is now restoring! yea!

Restart Fails after Software Update

For the past few weeks (I cannot tie down when this started), after carrying out any download that requires a restart through Software Update when I click on the Restart Button the menu bar disappears but the machine will not restart. If I leave it for a minute I get the message that restart has timed out as software update failed to quit. From here on in I cannot do a shutdown or restart from the Apple Menu, I have to do a hard shutdown by powering off. When I power back on the restart happens normally but no software is installed. After I logon I can then select restart from the Apple Menu and I then get the dialog box that gives me the option to install updates and restart or just restart. Selecting Install Updates and restart then works as normal. After restarting again logoff, shutdown and restart options from the Apple menu all work as normal, until I do a software update that requires a restart..... Anyone any ideas on how to fix this? It only happens on my MacBook Pro (migrated originally from Tiger), not on my relatively new iMac which was Leopard from new.

Exactly the same issue too on a iMac G5 upgraded from 10.4, started few weeks ago, very annoying. Makes the usually painless updates a lot more painful.

Registration of oracle database in restart fails

Installed Grid Infrastructure12C/Oracle 12c running on Oracle Linux 6.4 with Oracleasm . Single instance, Oracle Restart environment created.
Role separation with users grid and oracle. When running DBCA
PRCR-1006 : Failed to add resource ora.test12c.db for test12c
PRCR-1071 : Failed to register or update resource ora.test12c.db
CRS-2877: Owner 'oracle' of the entity 'ora.test12c.db' does not belong to the 'asmdba' group.
When running
srvctl add database -d test12c -o /orainst/app/oracle/product/12.1.0/db_1
PRCR-1006 : Failed to add resource ora.test12c.db for test12c
PRCR-1071 : Failed to register or update resource ora.test12c.db
CRS-2877: Owner 'oracle' of the entity 'ora.test12c.db' does not belong to the 'asmdba' group.
looking at /etc/group ....
[oracle@new-host-6 ~]$ cat /etc/group|grep asmd
asmdba:x:54327:grid,oracle
[oracle@new-host-6 ~]$
What is missing?

That's what it is, still broken.
srvctl start database -d test12c works after recycle of GI
253 crsctl stat resource -t
254 crsctl start has
255 crsctl stat resource -t
256 srvctl start asm
257 crsctl stat resource -t
Cluster Resources
ora.cssd
      1        ONLINE ONLINE       new-host-6               STABLE
ora.diskmon
      1        OFFLINE OFFLINE                               STABLE
ora.evmd
      1        ONLINE ONLINE       new-host-6               STABLE
ora.test12c.db
      1        ONLINE ONLINE       new-host-6               Open,STABLE

Help!!! Restart fail

Hello I´m spanish and my english is very bad,sorry.
I have a PIII 700MHz 512Mb Ram PC133,
my motherboard is MS 6309v2 and my graphic card is a
MSI Geforce 4 mx440 64 Mb Ram. I have installed Medal of honor, battlefield 1942, GTA3 ... and all runs well, perfect.But yesterday I bought a MSI geforce FX 5200 128Mb.
After it is istalled all these games dont work fine, my computer restart itself. The games beging well,introduction video run well but before the computer does nothing. Directx test tell me dat Direc3D dont work fine (7 interface-ok,8 interface-fail,9interface-ok.
I have installed: windows xp
the last version of nvidia driver
and directx 9.0b
Help me please
Thanks

elpe0,
I am looking for the amps on the 3.3v RAIL and the Max Combined Wattage for the 3.3v + 5v RAILs. You can get them off the sticker on the Power Supply which looks like this:
Take Care,
Richard

Restart fail - grey screen

Two failed updates. Downloads and seems to install ok but hangs after the 'restart to complete' leaving just a blank grey screen and my mouse cursor. Prior to that the progress bar only reaches about a third before vanishing. Disconnected all other devices, did all the recommended grey screen trouble shoots - same result. All was well with Mavericks. Anyone any bright ideas? Thanks.

Resolved eventually - had to restart in Safe Mode. Then made sure I backed everything in Time Machine. After which I restarted again (in normal mode) and after disconcertingly pausing again about a third of the way through the progress bar (held breath), I was finally able to access the new Yosemite interface as expected.
No idea what the issue was - the upgrade moved one Apple file to the 'incompatible software' folder and marked Apple's own MainStage software as incompatible but left it (I later deleted it to be safe).
Mmm... user status feedback for the process not good, especially the dodgy progress bar and at one point (I now forget where) I was viewing flashing images of my wireless mouse and trackpad with no idea what was expected i.e. they were already switched on. Indeed, both were rendered useless and I could not progress until I dug out an old USB mouse to let me click the next install screen.

Restarting failed BPEL instances in production

1. Assume there are 1000 transactions per hour. If one of the 3rd party services is down (say Oracle Apps) for an hour and 1000 bpel instances have failed, How do we restart the failed 1000 instances at the same time (or in a single click)? We want to avoid the administrator going and starting each BPEL instances separately.
2. If the BPEL flow has 10 activities in the flow and all instances have failed in the 6th activity (calling Oracle Apps Adapter service), when we restart the failed instance, Will it again redo the first 5 activities or will it start exactly from where it failed?
Thanks,
Joe

You said:
1 Assume there are 1000 transactions per hour. If one of the 3rd party services is down (say Oracle Apps) for an hour and 1000 bpel instances have failed, How do we restart the failed 1000 instances at the same time (or in a single click)? We want to avoid the administrator going and starting each BPEL instances separately.
It could be that processes are restarted by the BPEL PM by itself. Otherwise the message of the instances are recorded in the dehydration store. You can recover the message from this recover area via the BPEL console. You can selected them all and recover them at once. Or you create a Java program using the BPEL API to perform this. BUT it all depends on your process design! If a process fails, it should go into the exception flow and handled by the exception process, aka error-hosipital. If processes should be re-started you must design it.
2. If the BPEL flow has 10 activities in the flow and all instances have failed in the 6th activity (calling Oracle Apps Adapter service), when we restart the failed instance, Will it again redo the first 5 activities or will it start exactly from where it failed?
It depends in the process-type; synchronous or a-synchronous. A synchronous process will fail and restarteing should be done via the calling process, because the sync process does not dehydrate. An a-sync process will de-hydrate his process state on specific aktivities; receive/invoke/wait, when a process fails it will contuniue from his last process state.

Error message on restart: Failed to register application management beans

We are receiving an error when deploying custom task flows to the spaces instance in our Development environment and are experiencing the following problems:
Custom taskflow instances are all being "overwritten" by a single parameter (we have a webcam 'widget' each space points do a different location, but when we deploy they all suddenly point to the same place - this is not reflected in the parameters for the instance of the task flow).
Errors we are finding when we deploy:
Message Level     1
Relationship ID     0
Component     xx_xx_Spaces
Module     oracle.webcenter.webcenterapp.internal.view.webapp
Host     xx.xx.com
Host IP Address     xx.xx.xx.xx
Thread ID     [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
ECID     014fc7558b241cc9:-13d743d3:1367e1ed952:-8000-000000000001096f
Supplemental Detail     javax.management.InstanceAlreadyExistsException: oracle.webcenter.community:name=LoadTranslationsMXBeanImpl,type=LoadTranslationsMXBeanImpl,Application=webcenter,ApplicationName=webcenter,ApplicationVersion=11.1.1.4.0
at com.sun.jmx.mbeanserver.Repository.addMBean(Repository.java:453)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.internal_addObject(DefaultMBeanServerInterceptor.java:1484)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:963)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterAppContextListener.createAndRegisterMBeans(WebCenterAppContextListener.java:389)
at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterAppContextListener.contextInitialized(WebCenterAppContextListener.java:233)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.activate(AbstractOperation.java:569)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.activateDeployment(ActivateOperation.java:150)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doCommit(ActivateOperation.java:116)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:164)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:69)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)..
Message Level     1
Relationship ID     0
Component     xx_xx_Spaces
Module     oracle.webcenter.webcenterapp.internal.view.webapp
Host     xx.xx.com
Host IP Address     xx.xx.xx.xx
Thread ID     [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'
ECID     014fc7558b241cc9:-13d743d3:1367e1ed952:-8000-000000000001096f
Message     Failed to register application management beans
I have searched please help.
Edited by: jrickoi on Apr 6, 2012 2:38 PM
Edited by: jrickoi on Apr 6, 2012 3:02 PM

I have no idea except to suggest you contact them.

Restart failed - no longer able to boot

I plugged a USB external DVD (as my B&W has only a CD-Rom) in order to install OS X. I was able to get to the OS X Welcome page, wher it ask to RESTART. As the RESTART did not work, I went to the startup disk select, saw the DVD with OS X, selected it, then clicked on RESTART from the Welcome screen of OS X.
Now, surprise : all I get is a dolder with a question mark (?) blinking. The Support online here says to go back and select another startup disk, which *of course* I cannot do!
I disconnected the DVD, retried many times, there is nothing to do.
Any insight or trick so I can restart this machine ?
Thanks,

Check firmware (see link later in post)
This may sound like an involved solution but the USB ports come online too late in the boot sequence to use as boot device.
Instead, consider replacing CD drive with a new DVD burner. You can pick up a DVD+-RW for about $40-80 at any computer store. Or open the USB burner case you have and remove the drive.
Open your B&W (power down of course)
For a temporary work around, notice that there are 2 ATA cables on the motherboard. Unplug the chain to the optical/ZIP carrier. Plug any ATA 33/66/100 cable into the system board and your DVD drive. Make sure your optical drive is set to master (check jumper settings). There are several unused power connectors in a Yikes case, use any one.
Restart with your CURRENT OS. Check system profiler to verify drive. (Burning may not be supported fix that later by visiting http://patchburn.de and get Patchburn. It installs profiles for ANY burner not Apple OE.)
Now insert your install DVD, hit restart (don't change start up disk) and hold down "C". If your B&W doesn't boot to 10.4 DVD you can release the "C" and it will boot to original drive. If is doesn't boot to 10.4 check firmware updates
http://docs.info.apple.com/article.html?artnum=86117
And seriously consider installing that cheap DVD drive in your B&W. The Yikes case is really easy to upgrade. And if you are brave you can turn that G3/400 (100 FSB) into a G3/472 (105 FSB)
G4/533 Dual Mac OS X (10.3.9)

Java program to restart failed message in Adapter Engine

Hi,
I am using PI 7.0.
Could anyone tell me whether there is an automated job or URL I can schedule in order to periodically resend messages sitting in the Adapter Engine receive queue that are in status System Error, Holding, or Waiting?
I want to avoid having to monitor the system through message monitoring and manually resending the messages...
Many thanks
Brian

Hi,
please check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/05/b1b740f83db533e10000000a155106/content.htm
Restarting
Instead of restarting messages with errors manually with message monitoring, you can schedule a job to automatically restart these messages. This is possible for all messages for which the number of defined restart attempts has been exceeded (messages with the System Error status).
You can define one or more rules for each job to restart messages; these rules contain conditions that a message must meet in order to be restarted by the job. At least one of the defined rules must be met for archiving to take place.
Rescheduling
A standard job to reschedule messages is created automatically. The job runs once a day and ensures that messages lost as a result of database failure, for example, are rescheduled. You can schedule additional rescheduling jobs; however, you cannot define rules for them.

10.6.2 Restart Fails

Similar Messages

Maybe you are looking for