10.6.3 doesn't play Quicktime...

We went to a website and tried to play some Quicktime movies, but they wouldn't play. Using 10.6.3 (which I believe should be using Quicktime X).
Could someone please verify that these movies play on their Mac:
http://www.tapplastics.com/info/video_detail.php?vid=14&format=quicktime&PHPSESS ID=201003311902121610740914
I'm not sure if it's the site or our mac that bad.... thanks!

Could someone please verify that these movies play on their Mac
Plays fine for me under QT X v10.6.3 in Safari, in the QT X Player, and the QT 7 Pro Player.

Similar Messages

IPhone doesn't play Quicktime Web-Export for iPhone (not cell!)

Hello guys,
I play around with the html5 video tag and the possibilities to get implemented videos working on the iPhone. I exported the video via the standard function in Quicktime (Encoding Video for Wi-Fi, 3G, and EDGE) which is installed on 10.6.
I implemented the exported reference-mov file in my page but on the iPhone only the cell version is viewable - when WIFI is switched off. If WIFI is switched on the iPhone shows the poster image with the crossed play button in the front but the regarding video (not the cell version) can't be started
The desktop (computer) version of the same video is displayed on Safari on the MacBook via the reference file.
Is there someone who knows something about this behavior?
Kind regards
André

This is all to do with MIME types.
iPhones play .m4v files (as exported from quicktime) but will only accept then if delivered as "video/mp4" not "video/m4v".
The easiest way to do this to edit you .htaccess file by adding the line:
===========================
AddType video/mp4 mp4 mp4v mpg4 m4v
===========================
Apache Servers should now add that MIME type to their internal list.
Note: You should still upload the .m4v file (not rename to .mp4 as some have done) - it will now play over wifi.
Hope this helps and thanks to kingkong36 for the original solution.
If you are unsure how to edit your .htaccess file then then is lots of documentation online - just search '.htaccess' but a quick method is to make a .txt file containing the above line, upload that to the root file of your site and then rename it '.htaccess' from htaccess.txt - removing the '.txt' first.
Be careful though that you are not overwriting another file - make sure you ftp software is set to 'Show hidden files' or similar, then edit that one if there is one as files beggining 'dot' are hidden by default.
Cheers, Tim.

QuickTime Problem. Doesn't play video.avi.

I have updated the system up to the latest - Maverick. After that QuickTime Player doesn't play video.avi. I have tried restarting the app - worthless. Yet, it has been showing 'Converting' for 30 mins. Please, help!

Hello, thank you for your reply. I have several more questions if you don't mind.
1. Does it always take that long to convert a file (more than 30 mins)? It seems that it doesn't work. It stops at the beginning and than nothing changes.
2. Since when QuickTime needs convertation for avi? I thought this is a standart format.
3. How can I use QuickTime 7?
Here is what I see during 30 mins.
Thank you beforehand!

Safari doesn't play some quicktime movie/animation

Hi there ..
I have a problem with Safari:
It doesn't play some on screen little quicktime windows used for advertising or .. showing little animation.
Like www.luxology.com (they have a little quicktime playing)
But if I put the mouse over such little windows and rotate the mouse wheel they play.
But they don't play automatically, only by rotating the mouse.
I don't know if it happened after I used Webkit or after Quicktime 7.1
Any Help?

That site uses Flash (.swf) and not all Flash files can be viewed using QuickTime.
I don't know if there is a Universal version of the Flash Player available but it is what you should be using for features like Flash in a browser.

Media played with Quicktime doesn't play! Help please!!

I recently got a new iPod nano, and had to update my iTunes. Since I've done this, Quicktime hasn't been functioning properly. The sound (of a trailer, movie, etc) will play, but the media window doesn't play the picture; instead the window is just green. I've tried uninstalling/reinstalling several times, each without results.
Any help would be greatly appreciated

I had the same problem 4x. They did a clean and install and an archive and install to no avail. Here is the solution. The genius bar went on to the discussion board and found the solution. Ready; go to hard drive then /Library/Internet Plug-ins/Quicktime Plugin.webplugin. Delete last Quicktime plugin.webplugin. Let me know . peace

Quicktime 10.3 doesn't play

I just bought a Mc Book Air. But when I try to play any video mov or avi it doesn't play. I need any additional program or update?
File information: codecs MP42, MPEG Layer 3.

File information: codecs MP42, MPEG Layer 3.
MP42 and MP43 are Microsoft video codecs. Not sure if the free VLC player supports these formats or not. If not, you can always try the Flip Player from Telestream.

.SWF doesn't play in website

Hi, I am using Flash 5. I need to save my flash .swf to play on a website. I went into Publish settings and selected Flash player 9 and Actionscript 3. I then exported the .swf and .html.
Animation Doesn’t Play
I then placed the .swf in Dreamweaver using Dreamweavers .swf plugin. When I previewed the page in my browser the sound played but the animation didn’t. What a I missing?
Animation Play Button
Also, can someone please tell me the best way to have my .swf not play until the user clicks’ play. Is there a setting to get a start arrow like a Quicktime mov.? or do I need to set it up myself?
Thanks

Does the html page that Flash publushed work okay? USe the codee from that file if it does, DW is not a reliable source for embedding Flash content.
You will need to build in your own controls to have something clickable that plays the file.

ITunes doesn't play wavs made on PC

I have backed up a number of PC files on a DVD and tried to put them on my iPod shuffle, using iTunes on my MacPro, when I realized that iTunes doesn't play them, so I can't put them on the shuffle. However, those wav files play alright in Quicktime on my Mac. Why not also on iTunes? Is there something that I have to enable, or some sort of conversion that I must do?
The files seem to load in the playlist, then they show in both the playlist and the Music folder. The files seem to be there, for when I Ctrl+click > Get info, within iTunes, it shows their size, sample rate, etc. It's just that they won't play.
Any suggestion will be much appreciated.
Message was edited by: aeneas12

Yes, I have played almost endless numbers of WAVs in iTunes. These files have been created with foobar2000, PlexTools Professional, and EAC for the most part.
My PC is switched off right now so I can't play with NMP WAV files and iTunes, but I still think that if you simply use another program to reconvert the problematic files to WAV format again (a lossless process) with known good settings, the files will likely play in iTunes.
Also, it may be that NMP has created "floating point" vs. "fixed point" WAVs, and that would cause problems with iTunes.

Sound doesn't play with video

i just recently put a few music videos on my ipod and they play fine, but the music doesn't play along with them. also if i try to play the music then start the video, my ipod freezes up. can anyone help me resolve my dilemma here? thanks (:

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

I've updated iTunes to 11.1.4.64 on my windows 8.1 machine but no music will play. the track shows but doesn't play at all.

I've updated iTunes to 11.1.4.64 on my windows 8.1 machine but no music will play. the track shows but doesn't play at all. Any ideas? Thanks

Hi TRDV,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting steps in these articles if iTunes does not play your music:
iTunes 11 for Windows: If you have trouble playing music or other audio
http://support.apple.com/kb/PH12335
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Best,
Jeremy

IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

I am having trouble burning DVDs. Everything seems to be working fine during the iDVD project creation. I can watch the movie and select scenes within iDVD. Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left. Yet it ejects the DVD and the DVD won't play when inserted into a DVD player. It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play. I have already uninstalled and reinstalled iDVD. The problem persists. It seems like the burner itself is the problem. What can I do to fix it? I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

Hi
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev.
(Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Yours Bengt W

Itunes doesn't play the video anymore

Help! ITunes doesn't play the video clips anymore just the sound works.
I've restarted, quit the other applications but no result.
What can I do ?
Thank you for your suggestions.
ITunes 8.1
QuickTime 7.6
Mac OS 10.5.6
Mac Pro 2x3 GHz
RAM 8 Go

If you are playing through remote speakers, iTunes 8.1 will not play the video. Previous versions would play fine using only the computer's speakers, but 8.1 requires the remote airtunes speakers be deselected.

Firefox doesn't play video and audio, cann't download anything!

A very strange problem occurred a few days ago. I didn't pay attention on it at first ( I thought it was caused by my provider) but now I found that it's a real problem. Firefox doesn't play video or audio. For instance, it starts loading and that's all. The same is with playing music. In addition, I can't download any files and view a big image as quick as early.
What is more interesting sometimes Firefox just begins to work in ordinary way.

There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. Perian, which rolls several codecs into one package, might also work.
If you just want to play the movie any way you can, you can also give this player a try:
http://www.videolan.org/vlc/
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

IE8 doesn't play .mov files

i had downloaded few .mov files which are associated with an HTML page. I usued to open this HTML page in IE8 to view the .mov files in the browser itself when I was running windows vista. I have upgraded my system to windows 7. Now when I click on the .mov file in the web page, .mov files doesn't play within the browser, but it opens quick time player to play the movie. no issues with firefox (in vista & windows 7).
I have uninstalled & reinstalled quicktime 7.6.4. browser plugin is available in IE8 and enabled. still, no go.
your help would be much appreciated.
Message was edited by: devajeet

I have uninstalled & reinstalled quicktime 7.6.4.
Do you still get the same problem if you upgrade to QuickTime 7.6.5, devajeet?
http://www.apple.com/quicktime/download/

30G iPod doesn't play audio in movies or videos

My 30G iPod doesn't play audio in movies or videos... Can anybody help me?
Thanks!

What is the source of the videos and movies? Downloaded from the iTunes store or did you convert them from other sources? If the latter...
QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

10.6.3 doesn't play Quicktime...

Similar Messages

Maybe you are looking for