10.6.4 makes applications crash after upgrade

iTunes, all of Adobe cs4, Quark XPress and several other applications crash without launching after upgrading to 10.6.4. Any suggestions?
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 3 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005D.B00
SMC Version (system): 1.7f10

I have exactly the same problem. I upgraded a MacBook Air, iMac 27 inch Core i7 and a MacBook Pro 15 inch core i7.
The MacBook Pro has been modified -- I installed a 500GB Seagate Momentus XT Hybrid drive.
The MacBook Pro with the Momentus XT Hybrid drive has all the same symptoms you report. If I replace the drive with the Seagate Momentus 7200.4 that came with the MacBook Pro, then the 10.6.4 upgrade goes fine. I even erased and repartitioned the the hybrid drive, installed OS X from scratch, then installed the 10.6.4 update. As soon as I install that, applications crash when you try and launch them.
As I thought this was related to the Hybrid drive, I reported it to Seagate -- both at their user forums and by opening a tech support case.
http://forums.seagate.com/t5/Momentus-XT-Momentus-and/Possible-problem-Momentus- XT-and-OS-X-10-6-4/td-p/54217
Seagate tech support responded by suggesting I call Apple as all was well before the 10.6.4 update. Which is how I found this discussion thread. At least it is not just me!
Any resolution yet?
David

Similar Messages

Powerbuilder application crashes after upgrade to 12.5.2 (build 5006)

I have already seen few similar posts on this forum for similar issue. However, I feel mine is different from those and could be some basic steps am missing. Thanks in advance for any comments.
We are evaluating the effort and benefits of migrating our PB 10.2.1 (build 9731) application to PB 12.5 Classic. After downloading the trial version from the SAP site, I could migrate the application easily with only a handful of warnings. However, while running the application either from build (EXE) or from IDE, it crashes (windows application failure) frequently. In addition to that, few of our application screens opens as blank screen (doesn’t display anything in the DW attached).
My operating system is Windows 7 (32 bit) Service Pack 1. The application has many calls external DLLs (both windows standard and custom), as samples at the bottom. I believe that the correct (from PB 12.5) DLLs are copied to Powerbuilder home directory (C:\Software\Sybase\PowerBuilder 12.5 & C:\Software\Sybase\Shared\PowerBuilder) and the source code directory in my attempt to ensure that there are no issues with DLLs. However, initially I had installed powerbuilder 12.5 also under the same root as Power builder 10.0, but as I read few posts that DLLs from different version residing in same place can cause issues, uninstalled and installed PB 12.5 on different location.
Our PB application also interact with the .Net modules of the application by communicating through a custom DLL. However, that seems still working and I am able to open the .Net screens from the migrated application.
Below are the main scenarios in which the application crashes and every time I get a DLL error as given below.
1. While running the application from IDE and selecting ‘Exit’ from the main window. This will close any instantiated objects and close the mutex by calling the windows API.
function ulong CreateMutexA(ulong lpMutexAttributes, boolean bInitialOwner, ref string lpName) library "kernel32.dll" alias for "CreateMutexW" function ulong GetLastError() library "kernel32.dll" alias for "GetLastError;Ansi"
function ulong CloseHandle(ulong hMutex) library "kernel32.dll" alias for "CloseHandle;Ansi"
This will result in the below crash.
Faulting application name: PB125.EXE, version: 12.5.2.5006, time stamp: 0x50f93412
Faulting module name: kernel32.dll, version: 6.1.7601.17932, time stamp: 0x503275b9
Exception code: 0xc0000005 Fault offset: 0x0004c372
Faulting process id: 0x2bdc
Faulting application start time: 0x01cf3e72371227c9
Faulting application path: C:\Software\Sybase\PowerBuilder 12.5\PB125.EXE
Faulting module path: C:\Windows\system32\kernel32.dll
Report Id: 8feef8fc-aa65-11e3-8049-f500274aecdc
2. Opening of certain windows results in the below crash. If I try to debug the code and move mouse over the line of code being executed, then also I get the same crash. I don’t do the mouse move then I can proceed with the same line, however it will crash at a later line calling ‘classname’.
Problem Event Name: APPCRASH
Application Name: PB125.EXE
Application Version: 12.5.2.5006
Application Timestamp: 50f93412
Fault Module Name: PBVM125.dll
Fault Module Version: 12.5.2.5006
Fault Module Timestamp: 50f93437
Exception Code: c0000005
Exception Offset: 00175357
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 3081
Additional Information 1: 38ca
Additional Information 2: 38ca6ad0537dbd0555785bd862b8e94f
Additional Information 3: 0cd5
Additional Information 4: 0cd54a5b6672f15bf2ca366539d89c12
3. Few of the application screen opens but doesn’t display the datawindow attached to it.

... many calls external DLLs (both windows standard and custom),
You have a very complex application and it is unlikely that you will receive much help in this type of setting. As Chris has already pointed out, previous efforts appear to have been done in a sloppy manner; something indicated by the ANSI qualifiers on API functions that are not needed or relevant. In addition, the PB alias of CreateMutexA for the API function CreateMutexW is also suggestive.
I believe that the correct (from PB 12.5) DLLs are copied to Powerbuilder home directory (C:\Software\Sybase\PowerBuilder 12.5 & C:\Software\Sybase\Shared\PowerBuilder)
You should be very very careful about doing things like this. One should not simply scatter DLLs across directories without very good reasons as it often leads to strange problems. On a machine with the IDE installed, you should allow PB to install everything where it wants them. Copying or moving files is something done as a last resort - it is certainly something that you need to document in case you need to undo it or redo it at a later time.
Lastly, you might reconsider attempting this with the trial version. I don't how "current" the trial version is but I suspect it might be a bit buggier than the most current maintenance build. I'm guessing that you will have to do a bit more than recompiling to get the functionality related to "opening .Net screens" working. It might help to try creating a new application and put in some basic functionality to interact with all of these external processes, screens, dlls, etc since I suspect this is where the bulk of your problems exist.

5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from

5 crashes after upgrade to ios my address book immediately and I can not access emails, because the password is wrong and when I go to mail settings crashes the application immediately from

Same issue also. Occurring both on my iPad 2 and iPhone 4 after upgrading to ios 5
By the way, Mattban and Sancasslano, are either of you also experiencing any of the following issues:
* Problems with Contacts either crashing or listing no names
* Problems with turning iCloud on or off for application under Settings->iCloud... On both mine I just get a pop up saying that iCloud is being turned off but Contacts then just locks up.
* General problems when trying to synch applications on the iPad or iPhone over iCloud?
I am wondering if all these issues are in someway related to and whether it is worth trying to turn off iCloud somehow, though I cannot work out how this can be done once set up.

Curve crashes after upgrade to OS 4.5.0.81

Curve crashes after upgrade to OS 4.5.0.81
Ever since I upgraded to the T-Mobile handheld OS 4.5.0.81, my Curve crashes several times a day down to a black screen. I can't power back up on battery -- I have to plug in to an AC source, then power back up.
Hourglass remains on for quite some time to boot up, then I get a message about verifying security settings.
Curve usually crashes when I'm on a call, although now it seems to be happening when I'm using any of the phone setting menus.
I've already tried 1) freeing up memory on the SIM card by deleting pictures 2) doing a clean install of the handheld software using Desktop Manager.
It's still crashing. My BlackBerry is two months out of warranty (of course!). T-Mobile says I have to buy a new phone. I think it's a software issue (I've used the phone with no problems between 3/1/2008 and 4/4/2009).
Any help/insight would be appreciated.
Message Edited by wrdywmn on 05-11-2009 07:34 PM
Solved!
Go to Solution.

Below there is an excerpt from page to link I provided above:
What If I Want To Downgrade?
Forum member 'bfrye' made a good guide: Here is a quick install guide to your blackberry. This should easily cover reinstallation of OS and reverting back to previous OS version as well.
1. Download the version of OS you want to install from your carrier's website.
2. Extract or install the files from the previous step. They will automatically install into the correct location. This location will be C:\Program Files\Common Files\Research in Motion\Shared\Loader Files. Under this directory you will see directories with the model number of your device (if you installed the correct files) followed by a version number. Under these directories will be a host of .alx and .cod files. Do not modify or delete these files. They are needed to install the new OS.
3. Assume the BlackBerry Handheld Manager is installed, when you plug your device in, a popup will appear and ask if you want to upgrade your device. Choose upgrade and follow the steps given by the Application Loader. If you have any 3rd party applications you would like to keep, locate and select them at this time to avoid having to reload them after the new OS is installed.
4. This will also be the time the apploader will ask if you want to erase all data and reload or backup and restore the data on your device. Choose your preference and continue.
5. Typically a complete OS reload with backup and restore can take anywhere from 5-15 minutes depending on the amount of data on your device to restore.
6. The apploader will inform you when the process is complete. After this, the device will automatically reset itself (sometime this will take longer than a normal reboot) and once completed and on, your device will be upgraded and ready to go.
Now if you wish to downgrade your device to a previous version, many of the above steps will apply.
First, you will have to remove the newer OS from your PC. Do this by going to add/remove programs in the control panel and removing the software for the new BB OS. Make sure desktop manager is not running when you do this. After complete, restart the Desktop Manager.
When you plug in your device, if everything went well, the Desktop Manager should tell you that your PC has an older version of desktop tools than is installed on the device. It will give you an option to keep the version on your BlackBerry or downgrade to the version on your PC. You will want to select downgrade and let apploader do the work.
Should this method fail, you will have to download the file javaloader.exe from the internet. Place it in a common directory (I usually put mine in the Loader Files directory for easy access. From the directory you have javaloader.exe installed in type "javaloader -usb wipe". This will completely erase all data and applications from your devie. Now navigate to C:\Program Files\Common Files\Research in Motion\AppLoader and delete the file vendor.xml. Now plug in your device and install the new OS from scratch. Open apploader and select the USB port as your connection. It will then bring to you to the main apploader screen and all the OS packages will be listed with status as Install.
If you have question beyond the scope of this document please feel free to post them. However I suggest reading and rereading these steps to ensure you have tried the most basic and tried steps to load or reload your OS. Have fun and enjoy!
Have you done all steps described ?
if your issue solved set "Solution" mark at the relevant post

AW crashes after upgrade to OSX

AW crashes after upgrading to OS10.4.4.
I have never, in many years, had it fail to open prior to this.
I don't know if this is a coincident or not, but it will not open at all.
It begins the process then stops and gives this message:
.... The application Appleworks quit unexpectedly.
I restarted the system a couple of times but that did not help.
I believe it fails during font installation.
Maybe a font is incompatible with the new OS. ...but which one??
Harold

After updating AppleWorks 6 or OS X, it is necessary to delete the AppleWorks preferences. See my user tip, AppleWorks has stopped working correctly, for more information.
Even though it does appear that you may have a corrupt font, do the preference thing first. It is likely that the font was added with the system upgrade or you have a duplicate font. First, look for a font named Bauhaus 93. This font is installed by versions of Microsoft Office before Office 2004. The Bauhaus 93 with Office 2004 is not corrupt. If you don't find Bauhaus 93, before going through the trial & error of locating a corrupt font, use FontBook to check for duplicate fonts.
The trial & error method of corrupt font isolation involves moving all of the fonts from the various font folders to another folder (the Desktop is a good place) & then moving a few back at a time & trying to launch AppleWorks. When it crashes you will know the culprit is in the last bunch.
Peggy

My Aperture crash after upgrade to 3.4. Pls help !

My Aperture crash after upgrade to 3.4. Pls help!

Removing the plist "fixed" my problems too.
Any idea what specifically in the plist is causing the problem?
That depends. I have not seen your crash log.
The problem is, that the current Aperture installer is buggy. Depending on the Aperture version you are upgrading from, some frameworks may not be installed correctly. The installer erraniously assumes they are already installed. That is why the suggested fix is to reinstall from an early version, so the installer is forced to install everything new.
Your plist contains your webaccounts, recent files, the layout of the Gui. If one of these settings prompts Aperture to use ine of the missing frameworks, it will crash. For most people here it is the Facebook setting. Removing the preferences makes Aperture forget that you have a Facebook account. If you add that account again, Aperture probably will crash again.
Reagrds
Léonie

Various programs crash after upgrade to 10.6.4

Various programs crash after upgrade to 10.6.4 but only late in the day / evening. There seem to be no crashes early in the day.
After a reboot the problem is fixed and things seem to work OK.
Might this be some kind of memory-related issues?? Programs not releasing memory until eventually there's nothing left?
I'm a Windows guy until recently so am not up to speed with Mac software / hardware yet.
Any suggestions?
Thanks.

Hi, I am facing major instability in MS Office for Mac 2008 after the 10.6.4 upgrade. Programs (Word, Excel, PowerPoint), just crash randomly. Mostly when opening existing Office documents but there is no fixed pattern.
Tried Office auto update but no joy.
Any suggestions
Here is the MS Error log
Microsoft Error Reporting log version: 2.0
Error Signature:
Exception: EXCBADACCESS
Date/Time: 2010-07-23 20:37:36 +0530
Application Name: Microsoft Word
Application Bundle ID: com.microsoft.Word
Application Signature: MSWD
Application Version: 12.2.5.100505
Crashed Module Name: libTrueTypeScaler.dylib
Crashed Module Version: unknown
Crashed Module Offset: 0x00009bd5
Blame Module Name: libTrueTypeScaler.dylib
Blame Module Version: unknown
Blame Module Offset: 0x00009bd5
Application LCID: 1033
Extra app info: Reg=en Loc=0x0409
Operating System Information
Operating System: Mac OS X 10.6.4 (Build 10F569)
CPU: Intel Core Duo, Number: 2, Speed: 2147 MHz
gestaltPhysicalRAMSize err = 0, result = 2047 MB
gestaltSystemVersion err = 0, result = 0x1064
Screen: 1440 x 900, depth = 32, ltbr = 0, 0, 900, 1440
Microsoft Application Information:
Error Reporting UUID: 0B338D65-7DAA-4B4A-B8B1-0C17F587C24A
Time from launch: 0 hours, 14 minutes, 46 seconds
Total errors on this client: 40
Does this help at all ?

Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?

Many of my Apps are now crashing after upgrading my iPad 1 to OS 5. What's up?

Free memory. You are probably getting crashes becasue you have too much stuff floating sround in memory. Double tap the home button to see the task bar. Touch and hold any of those icons until they jiggle, then delete them all by touching the minus sign.
Do this every day, or more oftern if needed to keep the system freed up. If you are using safari a lot, make sure to fully close some of the windows by touch the x on the tabs. Each window uses some active memory.
From time to time, do a full reboot by holding the sleep and home button until the apple logo appears. Ignore the red slider. This also frees up some system resources.
The iOS system is supposed to do this for you, but since the intro of ios 5 there are a fair number of folks crashing.

Application crashes after IOS 5

Application crashes after installing IOS 5

OK, thanks for sharing that information.
Now, how about more details, assuming you are looking for assistance, here, such as the name of the application? It's impossible for anyone here to offer even a guess with so little to go on. Have you checked for an update to said app, or contacted the developer to ask for help?
Regards.

Missing application icons after upgrade to 2.0

Missing application icons after upgrading to 2.0. Tetris, Clock and Voice recording icons are missing. Looks like the applications are still installed but they are not showing up with all the other icons.
There is absolutely nothing in the help about restoring icons.
Any ideas as to how I can get these missing icons to display again?
Thanks.

Great! Where was it?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

IPad Air crashes after upgrade to IOS8.02

ipad air is crashing after upgrade to IOS 8.02. The apps crash leads to restarting of the iPad. Is this a software issue or hardware?
the apps that I use are Facebook,you Tube, chrome and LinkedIn.

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost if you do not have backup)
Settings>General>Reset>Erase all content and settings

Mail Crashes After Upgrade to Leopard

After upgrading from Tiger to Leopard I have found that Mail crashes every time I start up. For a start I need to select New Viewer Window to even see the application. When I do, I can see my old message folders but there is no content in them and although all of the account settings are correct, it won't download email. Then it won't let me quit unless I force quit. The problem persists after restarting.
I do have my mail backed up but Mail isn't working at all.
Please help!

Try this, make sure Mail is quit first of all.
1. Go into your users library (Macintosh HD/Users/username/Library).
2. In here you should have a folder called Mail, drag this folder to your desktop.
3. Now open mail, it will give you a window saying you have opened mail for the first time. DO NOT click continue (yet), leave this window open for now in the background.
4. Go back to the users Library Folder (Macintosh HD/Users/username/Library) where you just dragged the Mail folder from. It should now have created a new mail folder. Rename this NEW mail folder something like 'mailold'.
5. Once the new Mail folder has been renamed drag the Mail folder which is on the desktop (the one moved in step 2) back into the user Library folder. Now click continue on the Mail application window (step 3) and hopefully it will re-import as it was before.
I would backup your Users folder before you attempt any of the above steps just in case.

Excel Crash after upgrade Exception Code: c0000602

After upgrading from various previous versions of Excel to 2013. We now get random crashes, the latest was the following:
Problem Event Name: APPCRASH
Application Name: EXCEL.EXE
Application Version: 15.0.4569.1504
Application Timestamp: 52c5fc07
Fault Module Name: mso.dll
Fault Module Version: 15.0.4569.1506
Fault Module Timestamp: 52e0dcca
Exception Code: c0000602
Exception Offset: 0000000001061d55
OS Version: 6.3.9600.2.0.0.144.8
Locale ID: 1033
Additional Information 1: 4e04
Additional Information 2: 4e0485253d2f44721c5bb4fb58b546cc
Additional Information 3: 3ad5
Additional Information 4: 3ad5ddd13e408384c4d0aef897adf0ac
Please help, our clients are growing tired of these crashes.

Hi,
This forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office .etc. But I think your question is related to the upgrading of Excel product. So I suggest you posting it in Excel IT pro forum for more efficient responses.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

IMobile App crashes after upgrading iOS5

iMobile is the app for icici on-line Banking available in the App store. This app is really a very good and was working fine up to iOS4. After upgrading iOS5 this app is no more working. when I launch this app, while entering the " Login Pin " it is getting crash every time.
Please do the needful changes/correction.
Thanks.

You will need to contact the maker of the application. In the iTunes App Store, you will find a link for the developer and their support information.

10.6.4 makes applications crash after upgrade

Similar Messages

Maybe you are looking for