10.6.4 with Filevault - random freeze at login

Hello,
I am wondering if anyone else is experiencing this issue:
When logging in into account on Mac running 10.6.4 with Filevault turned on, the system will randomly freeze showing beach-ball or the mouse cursor (black arrow pointer). It does not respond to any key presses any mouse clicks. Only powering off shuts off the computer. On next boot it either does the same thing or logs in the user account - again randomly.
I created multiple user accounts (both admin and limited user) with same effect when Filevault is turned on. It happens in situations when the system is loading other extensions, say Little Snitch, Menu Meters or none at all.
The freezing goes away as soon as Filevault is turned off, no matter if the OS is loading start-up items or not.
I have formatted the hard disk and did a complete re-install, Archive-Install, talked with Apple Support but the problem remains unresolved. All suggestions are greatly appreciated.
What I see in the OS's secure.log is:
10-10-28 12:00:02 PM authorizationhost[49979] Failed to authenticate user (tDirStatus: -14090).

You most likely had a corrupted system prior to upgrading. The solution is to reinstall OS X. Snow Leopard's installer will replace the current system with a new one but preserve your Home folder, third-party applications, network prefs, etc. Hopefully this will fix the problem. If it does then reinstall the 10.6.4 combo updater.

Similar Messages

TS3742 MacBook Pro 13" with Mountain Lion Freezing at login and getting Kernel errors

Ive been working on a friends MacBook Pro 13" with mountain lion for about a week now. It is having intermittent kernal panic errors on boot up only. It is also freezing up frequently at apple logo. Disk check passed, reformatted and reinstalled os. Switched out Ram. Still happening. Can anyone help.

Linc Davis,
I hope this is what you were requesting. I deleted out the UUID but as far as hang reports, wasn't sure what that would look like so I am sorry if that is included in this. Please let me know what you think.
Thank you for your help in this.
Mon Apr 29 12:40:14 2013
panic(cpu 0 caller 0xffffff801c8b8709): "Double fault at 0xffffff801c86e7a4, registers:\n" "CR0: 0x0000000080010033, CR2: 0xffffff80956effd8, CR3: 0x0000000019c3d000, CR4: 0x0000000000000660\n" "RAX: 0xffffff80956f01f8, RBX: 0x0000000000000001, RCX: 0x0000000000000000, RDX: 0x0000000000000001\n" "RSP: 0xffffff80956effe0, RBP: 0xffffff80956f00c0, RSI: 0xfffffe803e625000, RDI: 0xffffff80956f0218\n" "R8: 0xffffff80956f0210, R9: 0xffffff80956f0200, R10: 0x00007ff4ea446c00, R11: 0x000000007215d3ba\n" "R12: 0x0000000000000001, R13: 0xffffff801c8c6d9e, R14: 0xffffff80956f0450, R15: 0x0000000000000000\n" "RFL: 0x0000000000010282, RIP: 0xffffff801c86e7a4, CS: 0x0000000000000008, SS: 0x0000000000000000\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.22.13/osfmk/i386/trap_native.c: 280
Backtrace (CPU 0), Frame : Return Address
0xffffff801c70bd20 : 0xffffff801c81d626
0xffffff801c70bd90 : 0xffffff801c8b8709
0xffffff801c70bf00 : 0xffffff801c8cddcf
0xffffff80956f00c0 : 0xffffff801c862f30
0xffffff80956f0250 : 0xffffff801c8b7a99
0xffffff80956f0420 : 0xffffff801c8cd4dd
0xffffff80956f0440 : 0xffffff801c8c6d9e
0xffffff80956f0570 : 0xffffff801c8b7b3d
0xffffff80956f0740 : 0xffffff801c8cd4dd
0xffffff80956f0760 : 0xffffff801c8c6d9e
0xffffff80956f0890 : 0xffffff801c8b7b3d
0xffffff80956f0a60 : 0xffffff801c8cd4dd
0xffffff80956f0a80 : 0xffffff801c8c6d9e
0xffffff80956f0bb0 : 0xffffff801c8b7b3d
0xffffff80956f0d80 : 0xffffff801c8cd4dd
0xffffff80956f0da0 : 0xffffff801c8c6d9e
0xffffff80956f0ed0 : 0xffffff801c8b7b3d
0xffffff80956f10a0 : 0xffffff801c8cd4dd
0xffffff80956f10c0 : 0xffffff801c8c6d9e
0xffffff80956f11f0 : 0xffffff801c8b7b3d
0xffffff80956f13c0 : 0xffffff801c8cd4dd
0xffffff80956f13e0 : 0xffffff801c8c6d9e
0xffffff80956f1510 : 0xffffff801c8b7b3d
0xffffff80956f16e0 : 0xffffff801c8cd4dd
0xffffff80956f1700 : 0xffffff801c8c6d9e
0xffffff80956f1830 : 0xffffff801c8b7b3d
0xffffff80956f1a00 : 0xffffff801c8cd4dd
0xffffff80956f1a20 : 0xffffff801c8c6d9e
0xffffff80956f1b50 : 0xffffff801c8b7b3d
0xffffff80956f1d20 : 0xffffff801c8cd4dd
0xffffff80956f1d40 : 0xffffff801c8c6d9e
0xffffff80956f1e70 : 0xffffff801c8b7b3d
0xffffff80956f2040 : 0xffffff801c8cd4dd
0xffffff80956f2060 : 0xffffff801c8c6d9e
0xffffff80956f2190 : 0xffffff801c8b7b3d
0xffffff80956f2360 : 0xffffff801c8cd4dd
0xffffff80956f2380 : 0xffffff801c8c6d9e
0xffffff80956f24b0 : 0xffffff801c8b7b3d
0xffffff80956f2680 : 0xffffff801c8cd4dd
0xffffff80956f26a0 : 0xffffff801c8c6d9e
0xffffff80956f27d0 : 0xffffff801c8b7b3d
0xffffff80956f29a0 : 0xffffff801c8cd4dd
0xffffff80956f29c0 : 0xffffff801c8c6d9e
0xffffff80956f2af0 : 0xffffff801c8b7b3d
0xffffff80956f2cc0 : 0xffffff801c8cd4dd
0xffffff80956f2ce0 : 0xffffff801c8c6d9e
0xffffff80956f2e10 : 0xffffff801c8b7b3d
0xffffff80956f2fe0 : 0xffffff801c8cd4dd
0xffffff80956f3000 : 0xffffff801c8c6d9e
0xffffff80956f3130 : 0xffffff801c8b7b3d
0xffffff80956f3300 : 0xffffff801c8cd4dd
0xffffff80956f3320 : 0xffffff801c8c6d9e
0xffffff80956f3450 : 0xffffff801c8b7b3d
0xffffff80956f3620 : 0xffffff801c8cd4dd
0xffffff80956f3640 : 0xffffff801c81e26a
0xffffff80956f3ee0 : 0xffffff801c81e5f5
0xffffff80956f3f20 : 0xffffff801c8b83a9
0xffffff80956f3fb0 : 0xffffff801c8cd401
BSD process name corresponding to current thread: kextd
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID:
Kernel slide:     0x000000001c600000
Kernel text base: 0xffffff801c800000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 21364954792
last loaded kext at 1663726355: com.apple.driver.AppleUSBTCButtons          237.1 (addr 0xffffff7f9e543000, size 20480)
loaded kexts:
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleUSBTCKeyEventDriver          237.1
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.iokit.SCSITaskUserClient          3.5.5
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleUSBHub          5.5.5
com.apple.iokit.AppleBCM5701Ethernet          3.6.0b1
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.5
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.driver.AppleMCP89RootPortPM          1.11
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Random freezes with kernel 2.6.34 and xorg 1.8

The other day I upgraded the kernel to version 2.6.34 and at the same time xorg-server to 1.8 (along with input drivers and video drivers). From that moment, I suffer from random freezes, the system is completely locked up; the screen doesn't blank, though. The system appears to be perfectly fine, but after some minutes it will freeze.
As far as I can remember, the freezes only occur when using a webbrowser. Chromium is my default browser, but also Firefox and Konqueror caused the system to freeze completely when I want to open a webpage. Other network programs such as irssi can run for hours and they didn't seem to cause any havoc.
At first I thought this might be caused by some instability in the latest xf86-video-ati driver, so I downgraded back to xorg-server 1.7. Still the same symptoms, so I am pretty sure now there's something in the kernel. So I went back to xorg-server 1.8 and downgraded the kernel to 2.6.33. So far, the system hasn't let me down, yet. Also, I uninstalled the madwifi packages on my system so I'm using the ath5 drivers shipped with the kernel. That change doesn't seem to make a difference.
I am not exactly sure what exactly could cause this, there's no trace in any log file to be found. My suspicion is that it's network related.
The hardware is a Thinkpad T42 with an ATI Radeon Mobility 9600 (r300) chip and an Atheros wireless card.
Anyone else with similar experiences with this hardware? I can't think of a way how to properly debug this. I know I can bisect, but that's time consuming and perhaps it's quicker to ask around first before I walk down that road. Any suggestions are welcome on how to track this down.

The last time I used arch was to do the updates, just got back to using it and crash!
Mine boots up to the point of the UDev events, but when I change the boot line to use /dev/sdxx instead of the /dev/disk/by-id/ xxxxxxxxxxxxxxxxx I go to the next step where the video mode changes, then it freezes. Half the other time it would stop at udev and either blank out totally or just stop. I don't even get a full bootup (standard or fallback). My other archs boot just fine.
Downgraded the kernel to the immediate previous kernel before .34 and booted upto the point of the window manager, so I think it's a problem with either the video driver or the xorg, because they were both updated at the same time, but the kernel may be a bit buggy also. (Of course, using the chroot and the arch install CD appropriate for my arch). Also, it only shows up on one screen on the dual headed setup, which makes obvious which one isn't working.
When the kernel calls the videomode (same one that can be called from kernel command line), that's when it is dying. The only machine I'm having trouble with is the same one that will be the only one to do any updates, maybe this will fix the problem.
The updates didn't make any difference. It still hangs at the videomode change. Was able to get a read out one time that one of the video cards had wrong ROM contents?
Have had to use the top level ftp.archlinux.org just to get the most recent updates, without having to fish through mirrors.
My presumption is that the kernel/video hardware is just not working in console mode or the graphics mode.
Strangely enough both of my hardwares, one is a mobile intel 945 and the other is a desktop 945. The mobile works without a hitch, and the desktop freezes.
Last edited by nomorewindows (2010-08-15 21:23:56)

Random Freeze with { UNC } error - hard disk problems?

Hi,
My laptop randomly freezes for a couple of seconds frequently. I am running 2.6.30-ARCH in a dell inspiron. I did a check on the /var/log/errors.log and found the follwing block of errors occuring over and over again as soon as the freeze up happens.
Sep 26 17:16:04 revelation kernel: end_request: I/O error, dev sda, sector 33016839
Sep 26 22:49:54 revelation kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Sep 26 22:49:54 revelation kernel: ata1.00: BMDMA stat 0x25
Sep 26 22:49:54 revelation kernel: ata1.00: cmd c8/00:08:01:cc:f7/00:00:00:00:00/e1 tag 0 dma 4096 in
Sep 26 22:49:54 revelation kernel: res 51/40:02:07:cc:f7/00:00:00:00:00/e1 Emask 0x9 (media error)
Sep 26 22:49:54 revelation kernel: ata1.00: status: { DRDY ERR }
Sep 26 22:49:54 revelation kernel: ata1.00: error: { UNC }
i did some googling and found out this may be due to damaged areas in the hard disk or the hard disk is about to fail. (is it true?)
I followed some other thread, used system rescue cd and did a fsck -f on the root partition. I still keep getting these randon freezes. is there anything i can do to fix these?
your help is appreciated.
Last edited by greylogic (2009-09-27 03:00:43)

I used the 80 wire cable that came with the board and ran the WD's jumperless (cable select) with the drive at one end and the blue connector on the MB. I also tried a 40 wire cable with the drive set to master. Both of these scenarios worked fine on my other computer, which I switched back and forth several times to prove to myself that the drives were fine and the cables were ok.
I did run spinrite from dos and was always able to work with the drives as long as I selected LBA access and disabled [Integrated Peripherals]->[VIA OnChip IDE Device]->[IDE DMA Transfer Access].
The MB never autodetected any of the drives correctly. Only when I used the the older WD 1200JB with access mode set to [LBA] and disabled IDE DMA Transfer Access did i get partial success. Admittedly, this is a very obscure problem and not many others are hitting. Hopefully the service guys will be able to sort it out since it is easy to reproduce.
I never used that JPWR2 connector, the manual stated that it was to supply power to the graphics card but my card has a regular 4 pin molex that i could get directly from the power supply. Wonder if the board would blow up if someone stuck the 4pin lead from their PSU in there ... maybe not such a great feature.
I did not try a single CPU or run memtest86 - things I probably should have tried. The problem to me seemed to be the integrated IDE controller was just not working correctly, so after changing ram, power supply, drives etc and seeing the exact same problem with the hard disk, I became more convinced it was just a flakey board. Plus the need to clear CMOS and reboot constantly to get the board to post added to theory.
Oh well, it is in RMA land now, so when it comes back I will let you know how it goes.

HP DV6000 randomly freezing with Arch Linux

Hello,
Just to clarify I am working with Arch Linux as a Web Developer, therefore I do have special needs such as having 20+ tabs open with vital information in different pages.
I can assure that after using Windows XP, Windows 7, xUbuntu, Linux Mint and Ubuntu I have never had such breaks or freezes in this machine.
The freezes are identifiable when the mouse seems to be very slow to move, the computer very slow to respond, the cursor of the icon does not change within the context where it is, I can't even open the menu bar to access the terminal (using Terminator).
After noticing these randomly freezes, I've started to keep the Terminator open with top command inserted. After seeing the values of percentage usage in CPU or RAM, the levels don't even go up more than 20%. However, I notice that the laptop suddenly starts heating a lot.
The solution is just to wait with some luck about 10 minutes. If it does not go on after that, I need to turn off the computer by pressing the button or unplugging the battery (yeah, the battery is dead too).
Some main packages I currently use are:
- Cinnamon
- Filezilla
- Netbeans PHP IDE 8.0
- Skype
- Geany
- 7-Zip FM
- Adobe Flash Player
- Chromium (my main browser)
- Firefox
- SSH
- Htop
- VLC Media Player
- Terminator
Any ideas of what could it be?
Thanks!
Last edited by SirPereira (2014-05-19 14:52:56)

Rexilion wrote:
It seems you do not have any swap. Correct?
Could you provide the output of dmesg after the occurance?
Yes, you are correct, I do not have any swap. Would I benefit from it? I guess I never used it.
After the occurance you mean, after the freeze? I will try to do it, but it is rare the case when the computer is able to not freeze at all.
Got it now:
The output of dmesg:
[ 0.443614] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.443838] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 0.444061] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[ 0.444184] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.444187] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.444190] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.444210] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.444213] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.444217] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.444237] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.444239] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.444243] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.444266] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.444271] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.444290] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.444293] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.444295] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 0.444297] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[ 0.444298] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[ 0.444300] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[ 0.444305] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.444324] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.444329] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.444345] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.444364] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.444399] intel_idle: does not run on family 6 model 23
[ 0.444441] GHES: HEST is not enabled!
[ 0.444500] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.444971] Linux agpgart interface v0.103
[ 0.445012] rtc_cmos 00:03: RTC can wake from S4
[ 0.445141] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.445167] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.445178] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.445322] TCP: cubic registered
[ 0.445446] NET: Registered protocol family 10
[ 0.445656] NET: Registered protocol family 17
[ 0.445905] registered taskstats version 1
[ 0.446529] Magic number: 14:681:877
[ 0.446613] rtc_cmos 00:03: setting system clock to 2014-05-20 08:51:33 UTC (1400575893)
[ 0.446705] PM: Hibernation image not present or could not be loaded.
[ 0.447929] Freeing unused kernel memory: 1120K (ffffffff818d8000 - ffffffff819f0000)
[ 0.447931] Write protecting the kernel read-only data: 8192k
[ 0.450553] Freeing unused kernel memory: 904K (ffff88000151e000 - ffff880001600000)
[ 0.451721] Freeing unused kernel memory: 416K (ffff880001798000 - ffff880001800000)
[ 0.458667] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.460077] systemd-udevd[47]: starting version 212
[ 0.478236] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 0.489263] ACPI: bus type USB registered
[ 0.489293] usbcore: registered new interface driver usbfs
[ 0.489304] usbcore: registered new interface driver hub
[ 0.494274] sdhci: Secure Digital Host Controller Interface driver
[ 0.494278] sdhci: Copyright(c) Pierre Ossman
[ 0.494499] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 0.494708] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 0.494739] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 0.494796] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 0.499195] usbcore: registered new device driver usb
[ 0.499671] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.499940] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.500201] ehci-pci: EHCI PCI platform driver
[ 0.500769] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.500777] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.500786] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.500808] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[ 0.501200] hub 1-0:1.0: USB hub found
[ 0.501209] hub 1-0:1.0: 2 ports detected
[ 0.501580] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.501587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 0.501593] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.501626] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000080c0
[ 0.503178] SCSI subsystem initialized
[ 0.503409] hub 2-0:1.0: USB hub found
[ 0.503419] hub 2-0:1.0: 2 ports detected
[ 0.503907] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.503914] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 0.503929] ehci-pci 0000:00:1a.7: debug port 1
[ 0.507842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.507859] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdd005c00
[ 0.508093] libata version 3.00 loaded.
[ 0.508752] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.508793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.513351] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.513563] hub 3-0:1.0: USB hub found
[ 0.513629] hub 3-0:1.0: 4 ports detected
[ 0.536813] hub 1-0:1.0: USB hub found
[ 0.536828] hub 1-0:1.0: 2 ports detected
[ 0.556530] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.560059] hub 2-0:1.0: USB hub found
[ 0.560067] hub 2-0:1.0: 2 ports detected
[ 0.560345] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.560352] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 0.560366] ehci-pci 0000:00:1d.7: debug port 1
[ 0.563401] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[ 0.568179] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.568198] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdd005800
[ 0.576683] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.576856] hub 4-0:1.0: USB hub found
[ 0.576865] hub 4-0:1.0: 8 ports detected
[ 0.577213] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.577220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.577228] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.577249] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[ 0.577420] hub 5-0:1.0: USB hub found
[ 0.577429] hub 5-0:1.0: 2 ports detected
[ 0.577678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.577684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.577691] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.577712] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00008080
[ 0.577877] hub 6-0:1.0: USB hub found
[ 0.577885] hub 6-0:1.0: 2 ports detected
[ 0.578124] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.578130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.578136] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.578156] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00008060
[ 0.578323] hub 7-0:1.0: USB hub found
[ 0.578331] hub 7-0:1.0: 2 ports detected
[ 0.578566] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.578573] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.578579] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.578609] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00008040
[ 0.578778] hub 8-0:1.0: USB hub found
[ 0.578786] hub 8-0:1.0: 2 ports detected
[ 0.579138] ahci 0000:00:1f.2: version 3.0
[ 0.579314] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 0.579386] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.579390] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 0.597458] scsi0 : ahci
[ 0.597577] scsi1 : ahci
[ 0.597688] scsi2 : ahci
[ 0.597787] scsi3 : ahci
[ 0.597890] scsi4 : ahci
[ 0.597988] scsi5 : ahci
[ 0.598049] ata1: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005100 irq 46
[ 0.598053] ata2: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005180 irq 46
[ 0.598054] ata3: DUMMY
[ 0.598056] ata4: DUMMY
[ 0.598058] ata5: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005300 irq 46
[ 0.598060] ata6: SATA max UDMA/133 abar m2048@0xdd005000 port 0xdd005380 irq 46
[ 0.916700] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.916718] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.063421] firewire_core 0000:06:00.0: created device fw0: GUID 0000000000000000, S400
[ 1.083353] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.083369] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.083987] ata1.00: ATA-8: TOSHIBA MK5055GSX, FG002C, max UDMA/100
[ 1.083990] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.084680] ata1.00: configured for UDMA/100
[ 1.084792] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5055GS FG00 PQ: 0 ANSI: 5
[ 1.087088] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[ 1.092125] ata2.00: configured for UDMA/100
[ 1.113361] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.203938] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
[ 1.208648] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.208739] sd 0:0:0:0: [sda] Write Protect is off
[ 1.208743] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.208779] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.290173] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.323084] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.323088] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.323226] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.325332] usbcore: registered new interface driver usbhid
[ 1.325335] usbhid: USB HID core driver
[ 1.325918] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.0/0003:045E:0750.0001/input/input2
[ 1.326088] hid-generic 0003:045E:0750.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input0
[ 1.336169] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1a.1/usb2/2-2/2-2:1.1/0003:045E:0750.0002/input/input3
[ 1.336217] hid-generic 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1a.1-2/input1
[ 1.418377] sda: sda1 sda2
[ 1.418731] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.426688] tsc: Refined TSC clocksource calibration: 2394.269 MHz
[ 1.446699] usb 4-4: new high-speed USB device number 3 using ehci-pci
[ 2.115101] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.200031] usb 5-1: new low-speed USB device number 2 using uhci_hcd
[ 2.385422] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0003/input/input4
[ 2.385472] hid-generic 0003:046D:C05A.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 2.426729] Switched to clocksource tsc
[ 2.490018] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 2.502963] random: nonblocking pool is initialized
[ 2.721320] systemd[1]: systemd 212 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 2.721454] systemd[1]: Detected architecture 'x86-64'.
[ 2.739429] systemd[1]: Set hostname to <arch>.
[ 3.632105] systemd[1]: Configuration file /etc/systemd/system/netctl@my\x2dnetwork.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.755410] systemd[1]: Starting Login Prompts.
[ 3.755928] systemd[1]: Reached target Login Prompts.
[ 3.755939] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.755992] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.756002] systemd[1]: Starting Remote File Systems.
[ 3.756478] systemd[1]: Reached target Remote File Systems.
[ 3.756488] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device...
[ 3.756839] systemd[1]: Starting Encrypted Volumes.
[ 3.757313] systemd[1]: Reached target Encrypted Volumes.
[ 3.757330] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.757364] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.757373] systemd[1]: Starting Paths.
[ 3.757845] systemd[1]: Reached target Paths.
[ 3.757866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.758419] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.758432] systemd[1]: Starting Swap.
[ 3.758902] systemd[1]: Reached target Swap.
[ 3.758913] systemd[1]: Expecting device dev-disk-by\x2duuid-3e31eb5f\x2d326a\x2d4cd0\x2daab3\x2d7d1e7ac0797b.device...
[ 3.759249] systemd[1]: Starting Root Slice.
[ 3.766515] systemd[1]: Created slice Root Slice.
[ 3.766527] systemd[1]: Starting User and Session Slice.
[ 3.767173] systemd[1]: Created slice User and Session Slice.
[ 3.767184] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.767681] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.767691] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.768180] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.768189] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.768677] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.768687] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.769176] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.769189] systemd[1]: Starting udev Control Socket.
[ 3.769676] systemd[1]: Listening on udev Control Socket.
[ 3.769688] systemd[1]: Starting udev Kernel Socket.
[ 3.770181] systemd[1]: Listening on udev Kernel Socket.
[ 3.770192] systemd[1]: Starting Journal Socket.
[ 3.770700] systemd[1]: Listening on Journal Socket.
[ 3.770716] systemd[1]: Starting System Slice.
[ 3.771341] systemd[1]: Created slice System Slice.
[ 3.771357] systemd[1]: Started File System Check on Root Device.
[ 3.771365] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 3.772001] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.772011] systemd[1]: Mounting Temporary Directory...
[ 3.790231] systemd[1]: Starting system-netctl.slice.
[ 3.790914] systemd[1]: Created slice system-netctl.slice.
[ 3.790930] systemd[1]: Starting system-getty.slice.
[ 3.791567] systemd[1]: Created slice system-getty.slice.
[ 3.809849] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.852492] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.876658] systemd[1]: Starting Apply Kernel Variables...
[ 3.877416] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.878150] systemd[1]: Mounting Huge Pages File System...
[ 3.878884] systemd[1]: Starting udev Coldplug all Devices...
[ 3.879636] systemd[1]: Starting Setup Virtual Console...
[ 3.880782] systemd[1]: Started Load Kernel Modules.
[ 3.880820] systemd[1]: Mounting Configuration File System...
[ 3.881579] systemd[1]: Mounting Debug File System...
[ 3.882319] systemd[1]: Mounted FUSE Control File System.
[ 3.882346] systemd[1]: Starting Journal Service...
[ 3.883635] systemd[1]: Started Journal Service.
[ 4.312288] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.431925] systemd-udevd[146]: starting version 212
[ 5.513427] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 5.513433] ACPI: Power Button [PWRB]
[ 5.513493] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 5.513777] ACPI: Lid Switch [LID0]
[ 5.513831] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 5.513834] ACPI: Sleep Button [SLPB]
[ 5.513911] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 5.513914] ACPI: Power Button [PWRF]
[ 5.596907] ACPI: AC Adapter [ACAD] (on-line)
[ 5.645033] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.657955] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.661096] acpi device:08: registered as cooling_device0
[ 5.663657] acpi device:0a: registered as cooling_device1
[ 5.663725] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input9
[ 5.708497] hp_accel: laptop model unknown, using default axes configuration
[ 5.720053] lis3lv02d: 8 bits sensor found
[ 5.729279] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.791571] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[ 5.791574] ene_ir: PLL freq = 1406
[ 5.791575] ene_ir: KB3926C detected
[ 5.791586] ene_ir: Firmware regs: 00 00
[ 5.791587] ene_ir: Hardware features:
[ 5.791589] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 5.821208] Monitor-Mwait will be used to enter C-1 state
[ 5.821217] Monitor-Mwait will be used to enter C-2 state
[ 5.821221] Monitor-Mwait will be used to enter C-3 state
[ 5.821225] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.821242] ACPI: acpi_idle registered with cpuidle
[ 5.821270] Switched to clocksource hpet
[ 5.827916] Registered IR keymap rc-rc6-mce
[ 5.828003] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input10
[ 5.828066] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 5.840895] ene_ir: driver has been successfully loaded
[ 5.848018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 5.877265] IR JVC protocol handler initialized
[ 5.878491] IR NEC protocol handler initialized
[ 5.879175] IR RC6 protocol handler initialized
[ 5.880281] IR RC5(x) protocol handler initialized
[ 5.880739] IR SANYO protocol handler initialized
[ 5.881059] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input12
[ 5.881065] IR MCE Keyboard/mouse protocol handler initialized
[ 5.881065] IR Sony protocol handler initialized
[ 5.881758] lirc_dev: IR Remote Control driver registered, major 249
[ 5.882267] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 5.882270] IR LIRC bridge handler initialized
[ 5.891466] [Firmware Bug]: Invalid critical threshold (0)
[ 5.892123] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.892126] ACPI: Thermal Zone [TZ01] (31 C)
[ 5.903447] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input13
[ 5.903835] wmi: Mapper loaded
[ 5.927466] ACPI: Battery Slot [BAT0] (battery present)
[ 6.029419] [drm] Initialized drm 1.1.0 20060810
[ 6.114983] cfg80211: Calling CRDA to update world regulatory domain
[ 6.137776] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMBA) (20131218/utaddress-258)
[ 6.137785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137789] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000050f (\GPIO) (20131218/utaddress-258)
[ 6.137793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.137822] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.180252] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 6.180255] Copyright(c) 2003- 2014 Intel Corporation
[ 6.180475] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 6.287693] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.287960] r8169 0000:03:00.0: irq 49 for MSI/MSI-X
[ 6.288149] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc9000584a000, 00:00:00:00:00:00, XID 1c4000c0 IRQ 49
[ 6.288152] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.345229] mousedev: PS/2 mouse device common for all mice
[ 6.436120] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801f conflicts with OpRegion 0x0000000000008000-0x000000000000800f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
[ 6.436128] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.526671] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[ 6.535077] media: Linux media interface: v0.10
[ 6.569608] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[ 6.569745] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.570548] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.570639] input: HDA Intel Front Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.570714] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.581760] input: PC Speaker as /devices/platform/pcspkr/input/input18
[ 6.599116] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 6.683172] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 6.683177] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 6.683179] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 6.683182] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 6.683232] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 6.701985] Linux video capture interface: v2.00
[ 6.780556] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.922833] nvidia: module license 'NVIDIA' taints kernel.
[ 6.922839] Disabling lock debugging due to kernel taint
[ 6.939605] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.939882] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 6.939892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.12 Fri Apr 4 14:51:15 PDT 2014
[ 6.991292] iTCO_vendor_support: vendor-support=0
[ 6.991687] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.991726] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 6.991831] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.064547] input: HP WMI hotkeys as /devices/virtual/input/input19
[ 7.066862] systemd-udevd[153]: renamed network interface eth0 to enp3s0
[ 7.089277] Bluetooth: Core ver 2.18
[ 7.089304] NET: Registered protocol family 31
[ 7.089306] Bluetooth: HCI device and connection manager initialized
[ 7.089316] Bluetooth: HCI socket layer initialized
[ 7.089319] Bluetooth: L2CAP socket layer initialized
[ 7.089331] Bluetooth: SCO socket layer initialized
[ 7.097641] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 7.119889] uvcvideo: Found UVC 1.00 device HP Webcam (05c8:010f)
[ 7.125560] usbcore: registered new interface driver btusb
[ 7.136432] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb4/4-4/4-4:1.0/input/input20
[ 7.136523] usbcore: registered new interface driver uvcvideo
[ 7.136525] USB Video Class driver (1.1.1)
[ 7.162108] kvm: disabled by bios
[ 7.167498] systemd-udevd[149]: renamed network interface wlan0 to wlp2s0
[ 7.515656] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 3655, fw id: 428212
[ 7.594362] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14
[ 7.949749] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.055002] systemd-journald[127]: Received request to flush runtime journal from PID 1
[ 13.835532] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.838466] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.935096] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 13.938046] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.964225] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 14.845976] nvidia 0000:01:00.0: irq 50 for MSI/MSI-X
[ 20.903153] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 20.906517] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 20.909113] wlp2s0: authenticated
[ 20.910074] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 20.913437] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 20.918955] wlp2s0: associated
[ 20.919008] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 21.089546] wlp2s0: deauthenticating from b8:c7:5d:02:3b:9d by local choice (reason=2)
[ 21.096263] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 21.099042] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 21.099780] cfg80211: Calling CRDA for country: AT
[ 21.101974] wlp2s0: authenticated
[ 21.103555] wlp2s0: associate with b8:c7:5d:02:3b:9d (try 1/3)
[ 21.108457] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9d (capab=0x1431 status=0 aid=7)
[ 21.115231] wlp2s0: associated
[ 26.591580] fuse init (API version 7.22)
[ 148.105211] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 148.107797] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 1/3)
[ 148.108518] cfg80211: Calling CRDA to update world regulatory domain
[ 148.310034] wlp2s0: direct probe to b8:c7:5d:02:3b:9e (try 2/3)
[ 148.513366] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 3/3)
[ 148.514272] wlp2s0: authenticated
[ 148.516865] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 148.517652] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 148.519034] wlp2s0: associated
[ 148.531940] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 231.077026] wlp2s0: authenticate with b8:c7:5d:02:3b:9d
[ 231.080206] wlp2s0: send auth to b8:c7:5d:02:3b:9d (try 1/3)
[ 231.081422] cfg80211: Calling CRDA to update world regulatory domain
[ 231.082756] wlp2s0: authenticated
[ 231.083955] wlp2s0: waiting for beacon from b8:c7:5d:02:3b:9d
[ 231.362261] wlp2s0: authenticate with b8:c7:5d:02:3b:9e
[ 231.365917] wlp2s0: send auth to b8:c7:5d:02:3b:9e (try 1/3)
[ 231.380479] wlp2s0: authenticated
[ 231.383400] wlp2s0: associate with b8:c7:5d:02:3b:9e (try 1/3)
[ 231.386425] wlp2s0: RX AssocResp from b8:c7:5d:02:3b:9e (capab=0x1511 status=0 aid=4)
[ 231.390072] wlp2s0: associated
[ 231.481241] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by b8:c7:5d:02:3b:9e
[ 311.833862] perf samples too long (2511 > 2500), lowering kernel.perf_event_max_sample_rate to 50100
[ 3074.285425] Watchdog[977]: segfault at 0 ip 00007f42693ed9b8 sp 00007f4251f777d0 error 6 in chromium[7f4265a4e000+55d7000]
[ 3166.859073] chromium[1212]: segfault at 39 ip 00007f7ddd6a7280 sp 00007fff9d984088 error 6 in chromium[7f7ddcefc000+55d7000]
[ 3172.385333] chromium[1169]: segfault at fbadbeef ip 00007f7ddf63345d sp 00007fff9d983f20 error 6 in chromium[7f7ddcefc000+55d7000]

HP Pavilion p6670t desktop randomly freezing with distortion to monitor (suspect hardware issues)

HP Pavilion p6670t desktop
Intel Core i3 550
Windows 7 64-bit
Intel HD graphics
I get random freezing on my computer with distortion to the screen (some of the colors look off, and I see thick purple vertical lines).
I'm not running any labor intensive processes (sometimes not even doing anything when it freezes). The temperatures are cool.
No BSOD.
I ran HP's hardware diagnostics tools, and everything passed. Ran Memtest on each individual stick and all together, and they all passed as well.
I suspect video hardware problems, but since it is integrated with my mainboard, I was wondering if anyone would have any suggestions before I go out and buy new hardware.
Thanks!

when the blue screen comes up next time, write down any error codes (long string of numbers) this will give you an idea on what the problem could be. write them down and either come back here or google the code... it sounds like hardware failing... could be your hard drive or maybe ram failing. one thing you can do is open it up and make sure you remove all the dust and lint from the inside and you can re-seat your ram chips along with checking your Hard Drive cable/ribbon

Random freeze, always when using 'save as' or 'open with' or 'attach'

For quite a while now I get random freezes (no specific event started this, and I cannot remember if it did it pre-10.6 it used to be very sporadic and gotten worse over time). I first thought it had to do with my temp control in my graphic card (RadeonX1900), since I had a lot of freezes when playing games. I controlled that by cleaning the dust and using smcFanControl, but I still have the random freezes. So I think this is something unrelated to temp control...
It happens randomly, sometimes once a week, sometimes 10 times a day, and it doesn't seem to relate to the amount of usage and what kind of usage on the mac.
But always these kind of events triggers it: 'save as' in any application. 'open with' in the finder. 'attach' in Mail. So whenever an application needs to show me what is on my computer (excuse my lack of technical terms). And it seems to happen more often when timemachine is backing up.
When it happens the only thing to do is to restart by holding the power button.
I run cocktail once a week, I have cleaned up using Clean My Mac. I have done a reinstall of snow leopard.
I would like to avoid doing an erase and install since I do not have the discs for a lot of software and the ones I do have, it would take forever to get everything installed and running again.
Any help is greatly appreciated!
Danielle

I've used that version on Tiger quite well, but if you're worried, I can give you a direct download link to an older archived one, (batchmod_137.dmg).
But I think something stranger is going on now, I'd try this Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Random freezes with INSERT-HANG-DETECTED in system log

Hi,
Since a few months I am experiencing random freezes on my early 2011 MacBook Pro 15". Sometimes they occur every few minutes and sometimes they can be away for hours. During the freeze the system is not responding and often a spinning beachball is shown. After the freeze the system resumes to work as normal.
In the system log (/var/log/system.log) I noticed the following messages which seem to have a timestamp corresponding to the freeze:
WebProcess[151]: INSERT-HANG-DETECTED: Tx time:28.505937, # of Inserts: 1, # of bytes written: 4875, Did shrink: NO
Does anyone know what these messages mean?
It doesn't seem to be related to the application that is in use during the freeze. Most of the time I only use Mail, Safari, Calendar, Terminal and Preview. My system (10.6.8) is fully up-to-date. The Activity Monitor does not show exceptional CPU or Memory usage.
What could also be relevant is that the freezes started to appear a week after I replaced a defective Hitachi HDD with a Crucial M4 SDD.
Does anyone have had the same issues with this SSD?
Thanks in advance for any help.
Maarten

This is an update to the question above.
I put in the original HDD and had the same issues. At one time it didn't even boot anymore. Then I sent in my MBP for repair. They first replaced the HDD with no success. Then they replaced the logic board and all issues dissapeared.
Maarten

My mbp with 10.8.2 is randomly freezing. Is there any test i can run?

My mbp with 10.8.2 is randomly freezing. Is there any test i can run? Software and hardware,?

Step by Step to fix your Mac

IMac (i3 2010) random freezing and now with 3 beeps

Hi I have a 21" iMac i3 base model with 8Gb of Ram (see below).
Ever since I got the mac about 10 months ago it has been randomly freezing up, becoming completely unresponsive to any input (keyboard mice etc), and can only be fixed by a hard reboot (holding down power button).
It can happen while I am away at lunch and I come back to find it frozen on the screen saver. Other times I'm just browsing the web (nb has happens with safari, firefox, and chrome). While others times I have been using the system to its fullest. There never seems to be a reproducible way of triggering it. I can go for a week without issue, and then it can happen 6+ times a day, and they go back to being fine again for awhile. Although it has been getting progressively worse over time and more constant.
I have tried repairing permissions (disk utility and onyx). Defraged the drive (drive genius), run TechTools pro and it passed all the tests. I don't have access to the orginal disks (work iMac) so running the AHT is not possible, as is a clean instal.
I updated to 10.6.8 this week, and now when it freezes, it is now accopained by 3 loud beeps...pause...3 beeps etc etc.
This suggests that it could be a memory problem, but I have never had a problem during the boot up process, and as I said it has passed the memory test on both TechTools6 and Rember, I'm not sure if this is the case.
Because the system completely frezzes, there is no log or error reports created, meaning that pin-pointing the issue or even having proof for the tech-guys/Apple is difficult.
Has anyone got any suggestions on a fix, or how I might be able to get an error report, or how I could induce the problem on que.
Thanks heaps
a
Model Name:          iMac
Model Identifier:          iMac11,2
Processor Name:          Intel Core i3
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per core):          256 KB
L3 Cache:          4 MB
Memory:          8 GB
Processor Interconnect Speed:          5.86 GT/s
Boot ROM Version:          IM112.0057.B00
SMC Version (system):          1.64f5

Ok so it definitely appears to be the RAM. I have found a way to reproduce the crashing....Running Prime95. Its normally takes about 15-30min on the stresstest to get the system to lock up.
But here is the strange thing. It only seems to work if I have the full 8Gb installed.
I have run each 2Gb stick by itself without issues.
And then run 6Gb, changing the empty slot each time, and again no crashing.
I found the following thread also has similar issues, with the RAM the most likely cause.
https://discussions.apple.com/message/15610565#15610565
I can discount USB,wifi,bluetooth as I tried this and still managed to get a crash.
But I did have screen sharing on so I am now testing if I can run the 8Gb with this disabled.
Will report back with my findings.

Random freeze of iMac with Tiger 10.4.5

Hello, since a few weeks my iMac freezes almost regular but I can not say if it is due to an application or anything else as it happens complete random. Sometimes it happens after a few minutes, sometimes after hours but in 8 of 10 "on times" the Mac freezes. I can only turn him off...
Does anybody know if there is a way to track last actions and investigate what the reason for these freezes are?
Thanks in advance. KM
iMac 800Mhz PowerPC G4 Mac OS X (10.4.5)

Open the Console app in the Utilities folder. Click on the Logs icon in the toolbar to open the sidebar logs list. You can examine the console and system logs as well as any crash logs to see if you can find anything helpful.
If your random freezes occur only when using a particular application, then there may be a bad preference file associated with that app. If the freezes are occuring almost always when you use Safari, then there are some things you can try. If the freezes are accompanied by a kernel panic alert, then there are other things to consider.
In the meanwhile it cannot hurt to do the following:
Boot from your OS X Installer. Be sure to use the installer for the version of OS X you have installed. After the installer loads select Disk Utility from the Installer menu (or Utilities menu if using Tiger.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Why does my new MacBook pro retina with 16gb ram keep randomly freezing

Why does my new MacBook pro retina with 16gb ram keep randomly freezing

Hi ..
A new Macbook Pro should not randomly freeze.
You have 14 calendar days from the time your items are delivered to initiate a return as noted here.

No more "random freezing" with my MbP ....

...since I installed Safari 4 Beta 10 days ago!
Before Safari 4, I had 2-3 freezes per day when using the 9600 graphics Chip. Not just using Safari but using all kinds of programs (with safari closed!). This has been a huge problem for many people.
See this link for more info: http://discussions.apple.com/thread.jspa?threadID=1767718&tstart=0&messageID=908 2914#9082914
Now, since I installed Safari 4 beta: not a single freeze in 10 days! and some other people see the same thing.
This is very weird no? The system is supposed to be designed so that a single program can not crash the whole system, no?! So now that the new version of Safari solves a permanent system crash problem, it looks like the problem was safari 3.x.x, which should not happen! Or...maybe Safari 4 contains also some System updates that were not published...
Well at least the problem seems to be solved, hope it doesn't come back! Would have been nice to know what the exact problem was though...

Unless I'm remembering wrong, there have been incidences of "random freezing" after installing Safari 4.
The system is supposed to be designed so that a single program can not crash the whole system, no?!
It is. The random freezing is very likely not a software issue though, so this point does not apply to the issue at all. The system software is not "crashing" in these cases of random freezing. It is much more likely that there is some hardware issue that causes the system to just freeze.
Or...maybe Safari 4 contains also some System updates that were not published...
This is actually likely, but I doubt that it fixed your freezing issue. Webkit (the underlying engine of Safari) was substantially upgraded in Safari 4. Webkit (being an open-source standard that Apple develops) is also used in some other areas of OS X for rendering HTML content. So, when the Webkit engine is updated as a result of a Safari update, there are changes occurring at a system level.
Again, I would really really really doubt that this update fixed your freezing. However, if it isn't freezing anymore, then I guess we shouldn't complain.
--Travis

Strange problem with desktop applications randomly freezing

Hi guys,
Over the past two weeks I've noticed that a few, very specific applications, have been crashing horrifically for me. Specifically, they're Firefox, Chromium and Eclipse and anything else powered by Java as well. I found the Eclipse issue people talked about on here regarding the upgrade to Xulrunner, but they only partially fix my problem.
What happens is the applications will randomly freeze, completely. The gui locks up and the window becomes a grey box, and the only way I can get rid of the window is with kill -9.
I've tried figuring out what's wrong, but honestly I have no idea. I'm running 32bit Arch, with a Nvidia 8800GTX card on the official binary drivers, using Openbox. Everything as of the time of this post is up to date throug Pacman.
Also, with the amount of problems I'm seeing on Gnome3 in here, what about creating a temporary sub-forum to hold them all? It would certainly tidy this one up a lot.

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Disgusted with HP Elite m9280a constant/random freezes, lock ups, BSOD, black screen

constant/random freezes, lock ups, BSOD, black screen.
I have been trying to trouble shoot this PC for almost a day now. weird problems like when 3 sticks of memory is present it wil not boot but it will boot on 1 and on 2 sticks will have hangs?
disappointed tot the max... u think HP TOTAL CARE - u pay extra thinking u are going to get a decent system...
i have run diagnostics on all major components... still no luck
someone please help - i have never spent sooo much time trying to repair a pc

Try this bootable memory diagnostic tool:
Download memtest86 iso file and burn it to disk using Imgburn.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

10.6.4 with Filevault - random freeze at login

Similar Messages

Maybe you are looking for