10.6.5 One of six SMB shares can't authenticate any more

OD Master OS X Server 10.6.5
Get authentication error from both Mac and PC when connecting to one of six SMB shares. Connection works to all shares via AFP.
All shares are configured identically: POSIX, ACL and in the smb.shares.conf file.
Here's error log when connecting to the troublesome share called FILES:
[2011/03/11 13:35:56, 1, pid=39885] /SourceCache/samba/samba-235.5/samba/source/smbd/service.c:makeconnectionsnum(1092)
bradhemze (10.0.0.45) connect to service FILES initially as user bradh (uid=1081, gid=20) (pid 39885)
[2011/03/11 13:35:56, 2, pid=39885] /SourceCache/samba/samba-235.5/samba/source/smbd/dosmode.c:unix_mode(90)
unixmode(.DS_Store:AFPAfpInfo) inheriting from .
[2011/03/11 13:35:56, 2, pid=39885] /SourceCache/samba/samba-235.5/samba/source/smbd/dosmode.c:unix_mode(99)
unixmode(.DS_Store:AFPAfpInfo) inherit mode 40775
[2011/03/11 13:35:56, 2, pid=39885] /SourceCache/samba/samba-235.5/samba/source/smbd/open.c:open_file(391)
bradh opened file .DSStore:AFPAfpInfo read=Yes write=No (numopen=2)
[2011/03/11 13:35:56, 2, pid=39885] /SourceCache/samba/samba-235.5/samba/source/smbd/vfs.c:reduce_name(917)
reduce_name: Bad access attempt: . is a symlink outside the share pathbradh closed file .DSStore:AFPAfpInfo (numopen=1) NTSTATUSOK
[2011/03/11 13:35:56, 1, pid=39885] /SourceCache/samba/samba-235.5/samba/source/smbd/service.c:close_cnum(1289)
bradhemze (10.0.0.45) closed connection to service FILES

Hello,
Did you ever figure this out?
I'm seeing the same issue now after 10.6.7 update and restart.
Thanks!

Similar Messages

Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

Hey ilyaz20360341,
Could you please specify how exactly did you transfer Acrobat from one MAC to other.
You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
If you have done the same way, then let me know if you are able to open Acrobat itself.
Do you get any specific error message while opening a PDF?
Hope to get your response.
Regards,
Anubha

I have a lengthy list of SMTP servers due to problems setting up iPhone 5s. I was able to remove one entry, however, I am unable to remove any more duplicates. How do I remove the dups?

Due to problems I encountered setting up email on my iPhone 5s, I have a large list of SMTP servers. I was able to remove one entry, however, I am unable to remove any more duplicates. How do I remove the dups?

Due to problems I encountered setting up email on my iPhone 5s, I have a large list of SMTP servers. I was able to remove one entry, however, I am unable to remove any more duplicates. How do I remove the dups?

I bought a EarPods October last year in USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can lisence music but can not adjust the volume and answer the phone, can I get a new one or what can I get?

I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?

Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??

HT1349 i can not text any more on my iphone it just quit one day

I can not text any more on my iphone 4 it just quit one day we have verizon as a carrier can anyone help

Did you just update to iOS 6?
If so,
This seems to be a working solution for some (while not 100% success):
From Demo:
Try this.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
From JaneMH:
After I plugged in my iPad to my PC and loaded up iTunes and let it sync up that sorted the problem and I am able to connect all right again

Trying to access SMB share, can read but not write, I use the domain account to autenticate and domain account has access to the share. its a samba domain and im a Windows Admin by trade.

I have two I Mac's Intel i7 models.
I have some problems getting them to write files to SMB shares.
The domain user account I use when requested to enter when i first try to connect to the share seems to go though without a problem and it presents me with a list of mounts (shares) I select one and the folder opens, I can read files and copy them but I cant write to any of the folders.
I have also mounted the network locatiosn to a folder from the terminal while also specifying a user name and password to use but this also doesnt allow the specified user account to write data to the share.
I have confirmed the user account can write to the share by having the user do so from a windows box.
any help from any of you mac guys would be great!!!!
Im a windows fan boy / Windows Server based Network Administrator and am slowly becomming a fan of your macs (mainly due to the Unix terminal access letting me realise there is more control to be had than most haters would lead you to believe).
Peace Out

I should add that I originally formatted the problematic drive for FAT32 from the Mac, but then the WinXP computer couldn't see the drive when I plugged it in directly via USB. That's why I went with Seagate's utility to format it.

I can't download any more one of my pages documents

Hi,
i normally use my pages app for taking notes during school.
I'm acctualli using the iPad.
So I have lots of documents.
Since a week I can't open one of them any more nor from my iPad nor from the iCloud.
I can't download it on my mac or send it on a mail.
I don't knew what to do...
Can somebody help me please?

On the iPad tap Settings > iCloud. Switch Documents & Data off then back on.
On your Mac open System Preferences > iCloud
Deselect the box next to: Documents & Data then reselect it.
Give iCloud a few minutes to re sync the data then try downloading a document.

New SMB share - can access only from owner node

Two nodes new Windows 2012R2 cluster on Azure. Setup all completed OK and with no issue. Cluster is online and can failover to both nodes. Create FileServer and then created couple of share using SMB quick. Access left for the default "EveryOne Full
control"
Now, I can access the share from the current node of the cluster and ONLY if I failover the cluster to the second , I started to access the share. Also other machines on the same network can not access the share (All Windows 2012R2)
I saw few similar posts and read them all , but that does seem to help me. Please advise of any information to resolve this.
Thanks

Hi Sir,
>>Create FileServer and then created couple of share using SMB quick. Access left for the default "EveryOne Full control"
If you share the folder in Windows Explorer as you normally would for a file share , Please refer to following article regarding to add a file share on existing cluster :
http://msdn.microsoft.com/en-us/library/dd897486(v=bts.10).aspx
http://msdn.microsoft.com/en-us/library/dd897474(v=bts.10).aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I cannot 'share' movies in iMovie any more

Having just upgraded to the new iMove, I can no longer share anything. The share buttons repond to the click as a mousedown kind of thing but they dont actuallt do anything!! Frustrating!!

I don't know if this will help, but I'm excited about a recent test I did and am sharing it on several sites --
If your movie is less than about 13 minutes, and you want super quality, I found a way to create a .mov file that fits on a DVD and you can burn it yourself, and anyone can play it. (I did not use iDVD.) If you're willing to live with a slightly degraded version, you can put a 106-minute video on a DVD, and it'll look just fine to a group sitting in a room. Obviously if you want to upload it to a file-sharing site, that's easily doable, as well.
Having slogged my way through iMovie’s “Help,” online Apple Help and numerous blogs like this one with solutions that were frustratingly varied, hard to follow and even outright contradictory, I gave up and did my own methodical tests to see which combination of options and settings yielded the best result for creating a file on my desktop that can be shared. I have no idea what the various and sundry options and settings are doing, but the results (differences) are apparent, and that's all I care about.
Here’s what I worked with: I have a four-minute movie created in iMovie ’11, with nice titles and credits that fade in and out, and one-second cross dissolves in the film. The movie is 3x4 aspect ratio, not letterbox. Looks smooth and clean as can be in iMovie, full screen. (If it matters, I am working on a Mac OS 10.6.8; Processor 2 x 2.66 Ghz 6-core Intel Xeon; Memory 8 GB 1333 Mhz DDR3.)
Tried exporting through Quicktime and not exporting through Quicktime. Most settings resulted in titles that were either fuzzy or were not clean and smooth during the fades, and often videos that were choppy and would freeze every second or so. Some had clean imagery and would play fine but got very pixelated during transitions (dissolves). Some that were much larger (higher megabyte numbers) and took longer to generate the file were actually of lower quality. Go figure.
Of all the tests I did, the best results came from doing the following. Here are two options:
A) For a small, convenient file that came to only 176 MB for my 4-minute movie, if you’re willing to live with some very slight image degradation and titles that show some slight compression during fades -- but looks perfect from across a room:
1) Share > Export using Quicktime > “Export: Movie to Quicktime” / “Use: Most Recent Settings”
2) Click “Options”
3) Click “Settings”
4) Compression: MPEG-4 Video
5) Frame Rate: Current
6) Key Frames: Every 24 frames
7) Frame Reordering -- unchecked
8) Compressor Quality: Best
9) Data Rate: “Restrict to 6400 kbits/sec”
10) Click “OK” and return to “Movie Settings”
11) Ignore “Filter” unless you want to alter the look of your video.
12) Adjust “Size” accordingly to your wishes. I clicked it, then selected “1920 x 1080 HD” and checked “Preserve aspect ratio using: Fit within dimensions.” This results in an image 1440 x 1080 (to fit within 1920 x 1080). Remember that if you don’t preserve your original aspect ratio you’ll get a larger/wider movie, but the top and bottom of your image will be cut off.
13) If your video is silent, make sure “Sound” is unchecked. I read that this speeds up the file-creating process.
14) Hit “OK”
15) Be sure to check where you want your file to appear. I chose “Desktop.”
16) Hit “Save”
That’s it! In my case, after about six minutes, I had a “.mov” file on my desktop that anyone can easily play (people may have to have Quicktime, though, as I understand it, but I believe that’s a free download; you do NOT need Quicktime Pro which costs $). I uploaded the file to a file-sharing site (Hightail) for others to download, and, testing it, it took me only a few moments to download (I have a FiOS fiber-optic connection, so if you don’t, it will likely take a little longer). The downloaded file played perfectly and suffered no degradation whatever from the one I generated to my desktop from iMovie.
B) For a super high-res version, if you’re willing to live with the size, the ONLY difference is No. 9: Change your Data Rate to “Automatic.” But as mentioned in the beginning, a standard DVD-R will only hold about 13 minutes of footage at this quality. If you're only concerned about sending a movie to someone else or a group, upload to a file-sharing site, no problem.
Oddly, this super-quality version took about the same six minutes to generate the desktop .mov file, but the resulting 1.44 GB file is far, far superior. You’ll be thrilled with the result!
The only downside –– to all of the file tests I did –– is that there is a slight loss of color saturation and contrast from the original iMovie imagery I worked with, particularly with the reds and oranges which become a bit muted. The blacks/darks came up a bit, yielding slightly less contrast. But these drawbacks are minor, to me.
If someone knows of a way to preserve the exact original color saturation and contrast, I’m all ears.
Ken M.

I have two apple IDs. One I can access and the other one the email address is not in function any more.

I would like to access the one that I no longer have a functioning email address for.

I do not have my password and that email address is no longer in service.
Any thoughts would be great!

I have an HP Photosmart 8200 and and Epson Artisan 800 printer and neither one is showing up in my printer selection any more. How do I get these back?

I have a MacBook Pro that came with Mac OS 10.7 Lion on it, and had been printing on both an HP Photosmart 8200 and an Epson Artisan 800. I had an issue where I would print from Photoshop and every time I would print I'd need to make a new printer. I don't think that it was ONLY WAY, but it worked for me. Anyways, I finally got tired of scrolling down the list to choose the new printer – HP Photosmart 8200_23 – or something like that, so I deleted some of the printers that had extra numbers. This is where the print Print & Scan dialog in the system prefs has the little plus and minus. It turns out that I pressed the minus on everything - going overboard with my clicks. Now, I have NO PRINTER and each time my computer tries to download drivers from HP and Epson, they have no updates for me. When I go on there website there are no drivers for Mac 10.7. I have no idea how to get my printers back. Any ideas or assistance would be greatly appreciated.
Thanks,
Erik Jurado

Download the HP drivers here:
http://support.apple.com/kb/DL907
Download the Epson drivers here:
http://support.apple.com/kb/DL1398

Iphoto 11 import problem. My camera is importing photos as 4x4. I see a single image in the preview window, but the import is 4x4. I just imported from a different camera and that one was OK. I can't find any setting to change to fix this problem

I am having a new problem in IPhoto'11. An older camera is importing photos as 4x4 (16 copies to a single image). In the preview pane the photos are fine (single copy per image). I have tried disconnecting and reconnecting but the problem repeats. Earlier I had a successful import from a different camera.
I can't find any settings to change this. Help!

Sorry but I do not understand your question
As to importing iPhoto simply copies the photos to the iPhoto llibrary - no changes of any sort are made
LN

I can't open a tab (tabblad in Dutch), only by clicking another one away, my Awesome bar isn't working any more and I can't scroll while watching web sites. what's wrong? (I hope you can answer me in Dutch...)

Ik kan geen tabbladen openen als ik erop klik, alleen als ik een andere wegklik, dan kom ik automatisch bij het andere tabblad aan. Mijn 'Awesome bar' werkt ook niet meer en het viel me op dat ik ook niet meer kan scrollen met de muis als ik webpagina's aan het bekijken ben.

You have Acrobat Pro on your system. It will try to open PDFs, and of course it will fail. You must uninstall it. Then, you will need a PDF reader. So install Adobe Reader. That seems quite simple, but perhaps something is wrong. If anything goes wrong with these two steps (1) uninstall Acrobat Pro (2) install Adobe Reader, then please let us know the details.

Creating a folder on an SMB share using a Mac

Hi everyone,
This is more of a question than a problem I'm trying to solve, really. Though the answer might help me better explain the issue to our security team.
Our environment has multiple Windows file servers, both 2003 and 2008. If one of these SMB shares is accessed from a Mac and the user creates a folder, will the ACLs on the share that are set to cascade actually cascade to this newly created folder? We've had issues in the past where ACLs that are supposedly set to cascade on a shared folder are not present on sub-folders created from Macs.
Next question: if the share resides on a netapp device, do the same rules apply? The Macs are still connecting to these shared folders using the SMB protocol.
All Macs are bound to our 2008 AD domain and use network accounts with local homefolders. The issue seems to happen when one or both of the following things happen:
1. A Mac user copies/creates a folder on a Netapp share and for some reason it doesn’t inherit rights correctly
2. We move the folder from one share on an actual Windows server to the Netapp and it doesn’t take permissions correctly.
Please let me know if you need any other information.

Let's put it this way: I'm asking on a Mac site because the people on non-windows support sites are WAAAAY more interested in talking about problems and solutions involving things other than Windows.
I'm fairly certain that the windows servers ARE respecting their own inheritance rules, barring any major bugs and the like which someone may know about...
The isue isn't with Macs moving shares to a netapp, it's with a share being moved to a NetApp that has folders created by a Mac. Talking with our security team further, it seems the problem may be limited to shares resident on a NetApp or moved from a Windows server to a NetApp.
I was primarily asking to see if anyone knew of any issues with these particular situations or had experienced something similar and had dug into it any deeper with F5 (NetApp vendor).

Windows Server 2012: SMB share with transparent failover

Have a nice day to all!
I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
So, there are 2 arrays on every server:
1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
And I installed Windows Server 2012 Standard on each server.
Than I created a failover two-nodes cluster.
And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
VMs even if one node of SMB share cluster is failed.
I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
Can anyone advice me something?
Thanks in advance!

Have a nice day to all!
I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
So, there are 2 arrays on every server:
1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
And I installed Windows Server 2012 Standard on each server.
Than I created a failover two-nodes cluster.
And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
VMs even if one node of SMB share cluster is failed.
I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
Can anyone advice me something?
Thanks in advance!
You need to have your storage you want to export as being a shared storage visible to your cluster (part of CSV). Then you'll configure failover file shares using content accessible from both cluster nodes. Refer to this manual for diagrams (ignore StarWind
and replace it logically with your existing shared storage you've used to create your cluster):
http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
Also see these manuals from MS on how to create failover file server:
http://technet.microsoft.com/en-us/library/cc753969.aspx
http://technet.microsoft.com/en-us/library/cc731844(v=ws.10).aspx
http://blogs.technet.com/b/askcore/archive/2010/08/19/working-with-file-shares-in-windows-server-2008-r2-failover-clusters.aspx
However if you want to use existing storage located on the both nodes you're out of luck. Microsoft does not provide anything representing local DAS to the cluster nodes. If you want to use existing DAS then you'll have to stick with a third-party product
like StarWind, SteelEye or DataCore. To create something like in this picture:
So you'll have a configuration with only two nodes, no physical shared hardware (SAS JBOD, FC or iSCSI) and vSAN. Refer to this manual:
http://www.starwindsoftware.com/ns-configuring-ha-file-server-for-smb-nas
Hope this helped :)
StarWind iSCSI SAN & NAS

10.6.5 One of six SMB shares can't authenticate any more

Similar Messages

Maybe you are looking for