10.6.6 the premature update

I have been following the OS 10.6.6 problems and usually wait a day or two after the announcement before I upgrade in case there are problems . I always back up and do all disk maintenance as well as start the upgrade in safe mode.
My 2008 MBP was the first upgrade which installed with no problems. I used this machine for routine tasks all day and have had no problems at all.
I then felt confident enough to upgrade my 2010 MBP and the installation process completed without any problems. After the restart things turned ugly as my first click on the dock froze the computer. I then did all the maintenance tasks as well as a rebuild with DiskWarrior and the glitch continued. Both of these MBPs have almost identical software installed including files and programs.
I am a back up fanatic so at the moment I am well into restoring the OS 10.6.5 state of the 2010 MBP via Time Machine. I have a clone which can be used if for some reason the Time Machine restore fails.
This is the first time I have had a problem with an OS X upgrade starting with version 10.2.0. I think this upgrade was rushed to accommodate the announcement of the App Store without adequate testing. I'll be eagerly awaiting 10.6.7

Thanks for the comment.
Both MBPs were updated with the 10.6.6 combo version which I always use.
Since I am batting .500 in the 10.6.6 game I don't have any urgency
to update the 2010 machine from which I am making this post with
10.6.5. I'll wait for 10.6.7 or even 10.7.0.

Similar Messages

HT4623 my phone does not have the software update option

my ipone 4 does not have the software update option?

Do the following:
Open the App Store app on your phone and update all your apps so the will work with the new iOS.
Connect your phone to your computer and open iTunes. If prompted that there is an update available, decline.
Sync with iTunes to create a new backup and transfer any purchases from your phone to your iTunes library.
Import your photos to your computer for safekeeping as explained here: http://support.apple.com/kb/HT4083.
Go back to iTunes, click on the name of your phone on the left side, go to the Summary tab to the right and click on Check for Update (or Update).
This will download iOS to your computer (which may take a while), then install the update on your phone. Pay attention to the progress information in iTunes on the top of the screen, and any information that appears on your phone during this process to be sure you don't disconnect your phone prematurely.

Office 2013: where the heck are the security updates hiding?

I built a deployment for Office 2013 yesterday. The source files were downloaded from Microsoft, with SP1 integrated. This is *not* a "Click to Run" deployment. I used the Office Customization Tool to make a few changes (we're
not using OneDrive, so that piece isn't getting installed. I disabled the "First Run" and Customer Experience stuff, and disabled RSS Feeds and SharePoint integration. And I put in our volume license key. Overall it's a pretty vanilla
build.)
I wanted to include all available security updates since SP1 has been released, and stick them into the "Updates" folder of my deployment. So after I installed Office 2013 x64 on my Windows 7 x64 system (the base package that I built installs
just fine), I went to Windows Update to see what was available. There is nothing there. I rebooted, and tried again. Still nothing. If I go into one of the Office 2013 apps, and go to File -> Account, I do *not* have any "Update"
buttons or options.
If I go to Windows Update in my Control Panel, and click "Change Settings", I have two things checked. "Give me recommended updates the same way I receive important updates", and "Allow all users to install updates on this
computer." There are no other options to look for alternative Microsoft products, or at least no options that I can find. This is Windows 7 x64 SP1, fully patched.
I know that there have been security updates released for Office 2013 since SP1 came out in February 2014. I manually downloaded a security patch for Lync 2013, and installed that MSP onto this test system with no
issues. So there are applicable security updates out there. So why in the world can't I find the updates through the normal mechanisms? Ideally, we'd want for end users to be able to install security updates manually in an
emergency, but either I'm missing something, or that is not possible in Office 2013. Hopefully distributing Office 2013 updates through SCCM will work, but from what I'm seeing so far, I'm not sure the machines will be "detected" as having
Office 2013, because right now it can't even scan itself against Windows Update for that product.
Thanks for any input...I'm quite baffled at how the update routine is supposed to be functioning in Office 2013. I think the missing link is why I can't choose to search for "other" Microsoft products from the Windows Update panel.
The option/checkbox is totally gone.

Hi,
By default Windows Update only updates Windows itself. To get updates for Office and for any other Microsoft products as well, you will need to upgrade your Windows Update to Microsoft Update.
On Windows Update panel, click "Find out more" link to install Microsoft Update.
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

I think there is a very annoying bug after the latest update of firefox, can I talk to someone, or chat with someone so I can get rid of it

Since the latest auto update of my firefox browser I am experiencing strange issues. Every evening when I stop working, I close my browser (closing all the tabs that I am working on and in the morning, I restore the session) . For many years everything worked just fine ... untill after the last auto update of the firefox browser .. all of a sudden a got 302 errors ( a blank page with the description 302 and I believe "page moved here" or something to that extend ... i try to click the link and get nowhere.
I first noticed it on a few wordpress pages (backend ) that I was working on and which were restored from the previous day ...
thinking it was a server error, since we have several vps and dedicated servers .. i contacted the company who hosts our servers ..
they looked into it and apparently .. there were no issues on the server side and neither on that particular computer ... but our server hosts told us .. that it is probably browser related and seemed to have something to with a bug with the cache of the browser
we didn't know what to do .. it was very annoying .. but at that point it only happened once on a hew pages .. so we decided to see what happened the next time
Next time we did not restore a session with wordpress pages .. but with the google search engine open and on a few other tabs logged into social media .... and as was saidn by our server hosts it was indeed not related to work that we did on pages on our servers ... since that time even the google search engine homepage ... showed us ... moved here
Can you pease look into it and fix this .. we are doing the same thing as many years on the same computer also a few years .. so it is not anything we do wrong either .. it is most definitely browser related
so can you please fix it asap .. since when we work on wordpress .. that is not the only thing that goes wrong .. we also have difficulty uploading updates ... when updating sometimes after the update of any particular change on a wordpress page is done ... we are also redirected to a blank page .. so the updated page does not want to load ... in that case we have use our back button ...
which sends us back to the right page ... but with the old data on it ... then we have to refresh that page .. and only then we see the page updated ... so it seems that there is an issue in both direction with the caching of the browser after the last update
Kind regards,
Robert

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

IPod Not being recognized with all the software updates

I've been without my iPod for a few weeks now and I desperately want it back. I dropped it a while back, and have come online to look up stuff to restore it, but none of that is working for me. I reset it by pressing "menu" and "Play" at the same time, then put it into disk mode by pressing the "ff" and "rwd" buttons together, but even in disk mode my computer is not recognizing it at all. The iPod screen says that it is in disk mode, and says it's okay to disconnect, but its not giving me the option to restore when I connect it to my computer and open the iPod updater.
It also gives me the file folder w/ an exclamation point whenever i don't put it into disk mode. And the few times that my computer does pick up something the iPod updater flashes a message that says "Can't Mount iPod" and then the updater manually closes itself. Anyone know what to do?
Thanks
20GB with Dock Connector Windows XP

For "Cant mount iPod" - please try the following first
Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
-- Right-Click on the iPod and select “change drive letter”
-- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
-- Safely eject the iPod
-- Reboot the PC
If still cant solve it then
The Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm

Software for HP Color LaserJet CM1312nfi MFP is not currently available from the Software Update server.

I recently upgraded to Mountain Lion, and found that I could no longer print to my HP CM1312nfi.
This is usually a problem with HP at every upgrade, but this time, they appear to have offloaded the driver download process to Apple.
My printer is connected wirelessly through a time capsule by IP address—the physical, not the virtual, e.g: 169.254.xx.xx instead of 10.0.1.x.
When I try to download the driver by bonjour or IP, I get the following error message:
Can't install the software for the Hewlett-Packard HP Color LaserJet CM1312nfi MFP because it is not currently available from the Software Update server.
Is this truly a Software Update server error, and if so, any clue when it will be resolved?
I am able to print with the generic driver as of now, but fax and scan capabilites are gone. The add fax dialog lists no devices.
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?
Thanks for your time and attention.

Of course, once I posted this, I tried again and downloaded the driver without issue.
My second question still stands, however:
Scanning is not supported on my printer model with the Hewlett Packard Print 2.12 driver. Will support be forthcoming, or did Mountain Lion brick my scanner?

Can't install printer driver: HP Color LaserJet 2605dn drivers "not currently available from the Software Update server"

I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!

Sean L. wrote:
I was having trouble printing to my HP Color LaserJet 2605dn from a Mac Pro running Mountain Lion, so I went to System Prefernces -> Print & Scan deleted it and atempted to re-add it. When I try add the printer I get this message:
Software for this printer is available from Apple. Would you like to download and install it?
After clicking Download & Install (the only option other than Cancel), I get this:
Can't install the software for the Hewlett-Packard HP Color LaserJet 2605dn because it is not currently available from the Software Update server.
What's the workaround when Mountain Lion can't find the driver?
Thanks!
The 2605dn has dual Network and USB connectivity. Which are you attempting to configure: Network or attached USB?
Printer on, and if networked, use a static IP address
Print & Scan
IP
Provide printer static IP address
Select Printer Software ... HP Color LaserJet 2605dn driver (not sure about that 2600 driver)
Add
Configure Driver under Options and Supplies
I have a 1994 HP Laserjet 4m Plus set up using these steps and the appropriate driver. I just added another network printer, using the same IP address, but using the above 2605dn driver without any issue other than complaint about a redundant IP address.
Hopefully, you have already sorted this out.

I downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

i downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

What version of iPhoto?
What format is the disk?

After trying to install the new update, I am getting a message from Windows saying that an MC file is missing, reintall Itunes-which I have now done 3 times. How do I fix this?

I received the new update from Itunes and after installing, I couldnt get into my Itunes. I get a message from Windows saying that an MC file is missing and to reinstall I tunes. I have reinstalled 3 times, the first time I didn't remove the old version, I installed the update over it. Next I tried the repair function under Control Panel. After that, I uninstalled Itunes and reinstalled again from the website. I still get the same message about missing files from Windows.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

I downloaded the latest update for my ipad and now it won't open. the screen shows the itunes icon and a pic of the usb cable

That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
iTunes: Restoring iOS software - Support - Apple

I got the MSCVR80.ddl message after I tried to do the latest update on Itunes. I went in and deleted all the related programs and reinstalled, but I keep getting a message during installation that "Service 'Apple Mobile Device' failed to start. Help!

I was trying to do the latest update on my desktop for my Itunes. I got MSVCR80.dll is missing. I saw a post about deleting all the apple itunes programs, restarting and reinstalling. I tried that. As it was installing a message came up about "Service'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start systems services. I did a retry, got the same message, then hit ignore. It went on. Then a message popped up saying "Itunes not installed correctly" Error 7 (Windows error 126)
Now my Itunes program will not open at all. What gives? This is very frustrating and I am not very computer literate to begin with.

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

After the last update for OSX 10.9.5, I get messages stating that I need to re-install the update because it did not install properly - How do I do this

On September 24, I got a message from the App Store saying there was an update of the Operating System on my MacBookPro laptop - OS X 10.9.5 - once I updated it, I got a message saying that there was an error in the update and that it did not install properly and that I should re-install the update. I have no idea how to do this. Can anyone help me?

You can manually download the Combo update if in doubt of the integrity of the OS 10.9.5
install on top of what you have, backups are always a good idea.
OS X Mavericks 10.9.5 Update (Combo)

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Can't install the software for the Brother MFC-9440CN because it is not currently available from the Software Update server....how do I get the driver then..it ised to work in my old mac..but cant print to it in my new unit

Download the Brother Mountain Lion drivers here.

After the last update on Mac os 10.9.2 end of April - I

After the last update on Mac os 10.9.2 end of April - I opened Pagemaker and my whole system crashed after talkign with Apple, I had to erase everything on my hard drive. I finally got it fixed and re-installed pagemaker cs5 and a few other program that I HAD to have while I was on vacation. When I got home, I tried installing CC and various programs (pagemaker, indesign, photoshop etc. Had to erase all of the other adobe programs and start from scratch. Every time I open ANY adobe products all of my "white space" is pink and white vertical striped in EVERY program. Apple mail, contacts etc. If I completely shut down the computer and then restart everything is fine until I open an adobe product again. I can't seem to get any help out of Adobe, does any one have any suggestions before I cancel my subscription entirely?
Thank you in advance,
Janie

You may need to ask for help in the individual program forums
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.

Anything known on this issue? Solutions? Even importing files from memory card is a problem.
In import window images are not diplayed as images but all the same blue mini images.
vertical files are changed into landscape positions and more. Mac version.
cj de vries

Op 12 apr. 2014, om 19:27 heeft Yammer <[email protected]> het volgende geschreven:
Re: Adobe Bridge CS6 is malfunctioning after the last update raw 8.0.199. Several problems.
created by Yammer in Bridge General Discussion - View the full discussion
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6292450#6292450
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6292450#6292450
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6292450#6292450. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Bridge General Discussion at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
THNX Problem solved

10.6.6 the premature update

Similar Messages

Maybe you are looking for