10.6.7 Crash during the update

Hello everyone,
I just downloaded 10.6.7 update, my macbook wanted to restart to start the system after installing, but after the restart it just stuck at the white screen in the beginning, i waited like 45 minutes but there were no move, so i had to shut down the system from the power button.
Does anyone has the same problem ? does anyone knows if this crash affects anything ?
Now it is written that i am using 10.6.7 os x but i am not really sure if my macbook was able to install it properly.
waiting for the answers.
thanks ...
Message was edited by: u.a.

Hello, I was having the same problem on my wife's laptop. It was stuck on the grey apple screen at startup after the new update was downloaded and had restarted. She was able to restart on her windows partition, but every restart on the Mac disk would get stuck.
A genius bar worker figured that there was probably an internet connection issue during the download of the update which could have caused a corruption that was preventing it from completing the install (I'm paraphrasing an over the phone conversation I had with my wife just after she left the mac store).
If you take your laptop in they should be able to sort it out if this is the issue as it was with us. The genius bar member was able to reinstall the update.
Hope this helps!

Similar Messages

My iphone crashed during the update and now it wont recover.

My iphone crashed during the update and now it wont recover. I keep getting a message say " an iphone has been found thats in recovery mode, please restore it and update."
Every time that i try to restore it, is stops with a couple of minutes left and gives me the same message.
can anyone help?

How many times have you tried...?
Some Users have reported that as many as 8 or 9 attempts were necessary before success.
See Here > http://support.apple.com/kb/HT1808
Be sure to Follow ALL the Steps...

I updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

i updated my ipod and my computer crashed during the update now the apps that come with the ipod such as the app store and itunes are not on my ipod how do i fix this

Connect your iPod to any computer with iTunes installed, highlight your device and try syncing the apps only. If it doesn't work might have to restore through iTunes. With the new iTunes and iCloud beta, you can have the iTunes list what apps are missing on your device but if you had previously purchased in the past and then have iTunes install them. You should always get in the habit of backing up your iPhone whenever you do any firmware/OS updating/upgrading or transferring over to new device. I really really really really hope you can get back at least some of your old info. I will tell you this, I have been kicking myself in the butt for not routinely backing up my iPhone when my beautiful special iPhone 4 came up missing and had to revert back to my 3GS. iPhone 5 will be released in a few months so I am holding off on purchasing a new iPhone til then, not that I did so without reservation and a little bit of iPhone 4 withdraw.

Tried to update iPad to iOS 4.3 and it crashed during the update

Now all the screen on the iPad shows is to connect to iTunes. It has the little usb cord pointing to iTunes. Since then I have not been able to get iTunes to recognize it. I have tried restarting my laptop, reinstalling iTunes, and even checked to make sure the iPad showed up under the device manager. Right now it is basically useless. I am running Windows 7 if that matters. Help

Im having the SAME ISSuE
Same setup.. win7 64bit
iPad is useless right now....
when updating... it said there was an error..
and now the same connect to iTunes screen!
HELP! i use this all day at work... im an idiot for thinking i should have updated.

Computer crashed during software update

Currently using OS X Lion, started the latest software update and computer crashed during the update. I forced the computer to turn off, but when I turn it on, it returns to the same "crashed" condition (grey screen with an apple logo in the center, plus the time symbol spinning).
Greatly appreciate if anyone can help me. Thanks!

Back up all data, then boot from your recovery partition (command-R at startup) and reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

IPhone 4 crashed during app update, apps are blank

I had 24 app updates in the app store, tried to update through the phone. It crashed during the update, and now all the to-be-updated apps are showing up with a white generic logo and 'waiting...' message, updates do not go through. The app store still shows 24 updates, but when I go into that page it just spins. I have rebooted twice. I will not be close to my phone backup until tomorrow. Any ideas are greatly appreciated! Thanks!

Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. See http://support.apple.com/kb/HT1808 for details.
Then you can restore your phone: http://support.apple.com/kb/HT1414

Crash during firmware update

I just tried to update my iPod Shuffle. I ran iPod Updater, it said "Update needed" and I clicked update button. In the middle of the update, Windows crashed and the iPod seems to be dead now. It isn't recognized by Windows anymore and iPod updater just says "Plug in the iPod for update" and when I plug it in, nothing happens. Even when I press the battery button, nothing happens (and I'm sure the battery isn't empty becasue before the incident, when I pressed the battery button, it was showing green). I tried everything: reseting the iPod, restarting computer, reinstalling software and nothing is helping.
I suspect that the firmware of the device got fried during the update procedure (since the update was aborted halfway because of crash). Is there any way to revive the device (reflashing the firmware somehow) than taking it to service?
Shuffle Windows XP Pro
Windows XP Pro
Windows XP Pro

My problem is the same.. If i connect my ipod shuffle on the USB port(s) my PC can't recognize it and in "My Computer" folder there is new device called "Removible Disk (F:)" but I can't open or format it.. I hope in a fast solution, 'cause i can't live without music! :P

Crashes during the save process

Okay, so now that we’ve determined that I DO have the PrE 8.0.1 update/patch… I need to figure out why I am unable to save the video I’ve spent days working on.
As I stated in the last discussion concerning the update, I am in possession of a fairly high-speed computer that should be able to handle this kind of work.
I believe I’ve seen some other folks having problems because of the type of video they are using or importing… What kind of video should I convert to if PrE 8.0.1 doesn’t like what I am using? Oh and I have gotten the message to “Save often because you are running low on system memory” WHICH IS UNBELIEVABLE!!!
So here we go. The video that I am trying to save is approx. 10 minutes in length and is made up of still .jpg photos and videos taken from a Canon SX210 IS. I sure hope that is helpful. I looked at the file types and they are .mov files.
One other thing that may be helpful in identifying the problem… and is quite interesting… after the program crashes during the saving process, I can always go to the save location and find the entire PLAYABLE video saved in the format that I wanted (which was MP4). The only thing is that there are three separate files. 1) Complete clear audio 2) Complete clear video and 3) A third unknown file type that I can’t open. Quite strange. Oh and if you’re wondering if I tried to add open those two (Audio and Video) files in PrE and save them together yes, I did… And it crashed again.
Bob

Bob,
Here is SOMETHING to think about, regarding the Memory/Resources error messages.
This ARTICLE might be helpful at finding clues as to what could be causing the problem.
The links in this ARTICLE will help provide you with some very useful tools for checking programs and Processes, like Process Explorer.
As for the inability to Save, I would try a Save_As, and see if that helps, and does the trick. If not, try Save_As_a_Copy.
When you do Save, do you get any error messages, or does the program just not Save the Project file (.PREL)?
In case it's a system issue, can you tell us about your system in detail? Aspects like the I/O sub-system, i.e. the HDD's, their size, speed, free space, controller type(s) and how they are allocated, will be very useful.
If you are working with SD material, converting to DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio, will be as good as it gets.
Good luck,
Hunt

IPhone 4 crashed during ios update (5.0.1) and won't restore. anyone know how i can get my iPhone working again?

iPhone 4 crashed during ios update (5.0.1) and won't restore. anyone know how i can get my iPhone working again?

Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. See http://support.apple.com/kb/HT1808 for details.
Then you can restore your phone: http://support.apple.com/kb/HT1414

Lumia 920 freezes/crashes during the night. Can't ...

I have had my Lumia for 10 days and for the second time it crashes during the night and the next morning I was not able to turn it on using the power button. I had to do a soft reset... The alarm that I set to wake me up never started... This means that I cannot trust my phone for waking me up in the morning! This is unacceptable!

There is a possible alternative to the flashing or reset suggestet by the care point.
As the problem only started recently, there is a high probability that it is caused by a bad app or setting or the combination of the two. The alternative is to reverse whatever apps you installed or settings you changed just before this problem started.
The flashing is just an easy way out because it reverts the phone back to its out of the box condition. However, you may find yourself in the same situation again should you install the same app or make the same setting changes after the flashing.
I had a similar problem with one app but I managed to isolate it and the problem disappeared after I uninstalled the app. The app was pulled subsequently and updated by the developer and is now working fine on my phone.

In updating my iPod to 6.1.2, I received an error during the update. Now, ipod is not rebooting. Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture. I don't know how to reset so that I can restore my backup

In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says impo

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

I downloaded the 4.0.1 and have had 10 updates so far. Firefox freezes up constantly and is now locking up during the updates. What the heck is going on?

I downloaded 4.0.1 Saturday and have had 10 updates so far, including 5 today. I am now up to 4.0.10.
Since I updated, Firefox keeps locking up while I am using it. It is now locking during the updates.
Why so many updates so soon.
What is wrong with Firefox and when am I going to be able to get on the web without locking up constantly?

I have Internet Explorer as well, but, It says I need Adobe to go to Facebook. When I try to download Adobe, I says IE must be my primary browser. I have no idea how to change, do you?
Firefox is especially bad at locking up when I am playing games. Have you had this problem?
I will switch immediately if I can figure out how.
Thanks so much for any help.

I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!

I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

HT5313 it seems the comupter is frozen during the update of OS X Lion TO v10.7.5

it seems the comupter is frozen during the update of OS X Lion TO v10.7

Antony D'Emanuele wrote:
Can anyone provide me with a link to the OS X bash Update 1.0 for OS X Lion Server v10.7.5, apparently there is a specific update. I have searched the Apple site without success, I have found the Mavericks, Mountain Lion and Lion version but not the server versions (which do exist, see Apple security updates)
With Lion and later there is no such thing as a server version of the operating system, this is unlike the previous Mac OS X 10.6 aka. Snow Leopard which did have a specific server version of the operating system.
So, in reality one only needs Lion, Mountain Lion and Mavericks versions. The server software is merely an application these days.

10.6.7 Crash during the update

Similar Messages

Maybe you are looking for