10.6.7 won't print from CS5

I went through hours of troubleshooting and was finally able to print a jpeg from CS5 by going to File/Print in CS5, select Print Settings in the middle column. That opens the Apple print dialogue box and I select Color/Quality Options and change the RGB Color to Device. After that, I was able to print fine even after changing it back to the original settings.
I hope helps someone else...

I spent hours troubleshooting with Adobe and Apple with this very issue. And I think I found a resolution doing my own troubleshooting...
From CS5 go to File/Print and the Adobe print dialogue box opens. In the middle is a field to select Print Settings, under Copies. Select Print Settings which will open the Apple print dialogue box. Hold down the Layout field and a list opens. Select Color/Quality Options and change RGB Color to Device.
Doing this seems to reset something because I was finally able to print! And returning to the original settings seems to work again too. So, it's almost like resetting the print function from Photoshop. Although I hate to say it, seems the issue was with OS 10.6.7
I hope this is helpful to someone else.

Similar Messages

HP Officejet Pro 8600 N911g won't print from applications from IMac OS 10.7.5

Just had a software update today, now it won't print from applications (Excel, Word, etc). I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc. Don't know what else to do. Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer. IP addresses on wireless and printer are similar. Looked all over forum, but couldn't find a solution. Printer is not even 2 months old. Doesn't make sense. Seemed to stop printing after we used the scanner, not sure if that is an issue for any reason. Any help would be appreciated, thanks.

Just had a software update today, now it won't print from applications (Excel, Word, etc). I've done all the troubleshooting in the exact orders and have also shut everything down, reinstalled, turned off router, etc. Don't know what else to do. Prints out printer status report, Wireless network test results shows that no problems found, congratulation on the successful setup of your wireless printer. IP addresses on wireless and printer are similar. Looked all over forum, but couldn't find a solution. Printer is not even 2 months old. Doesn't make sense. Seemed to stop printing after we used the scanner, not sure if that is an issue for any reason. Any help would be appreciated, thanks.

My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
Credit for this solution to ASC user Yuengdog1983.

Won't print from rear tray

I have a Pixma MG6220. No matter what I do it won't print from the rear tray from a source on the web. I go to both the quick setting and main tab and select "rear tray." Still prints from cassette. I took out the paper from the cassette. Won't print unti I load paper in the cassette. I even selected a different paper than plain paper and selected rear tray - but it still printed from the cassette.
I selected "continuous autofeed" for a default, removed paper from the cassette - and it still wouldn't print from paper loaded in the rear tray.
It will print from the rear tray if it's a document originating from my computer (or at least I just tried that and it worked). I did not change from plain paper, I only had to select rear tray.
Yes, I realize "save the document to your computer" will be a suggestion, but the website won't let me. It's a "free printable" that is not downloadable.

Hello.
The issue may also be related to a setting in your web browser. Check to see if your browser has a Page Setup option. This menu may be controlling the paper feed setting.
If the issue persists, please try using a different web browser to test the unit.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Won't print from computer

my printer won't print from computer but will from an sd card

Hi,
Download and run HP Print and Scan Dr utility from link below to troubleshoot the issue.
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

When i 'upgraded' to Mavericks, it locked me out and shut down my computer. now it won't print from my Epson Stylus CX3810. Epson doesn't have the driver to download and neither does the App store. Suggestions?

when i 'upgraded' to Mavericks, it locked me out and shut down my computer. now it won't print from my Epson Stylus CX3810. Epson doesn't have the driver to download and neither does the App store. Suggestions?

I'm having similar problems with my Epson Stylus DX5000. There was no in-built driver available (the generic old and new Stylus drivers didn't work), so downloaded the latest driver from Epson site. It shows as being available to print to, but just sends data to the print queue then job disappears.
I hope you're right C F McBlob, I could do with printing today but if there are new drivers available from November 5, then so be it.

Printing from CS5 Extended

I have upgraded my iMac to Mountain Lion and now I cannot print from CS5 extended version 12.0 x 64. Have you a patch for this please. As a Photography tutor, it is essential to have this working correctly.
Kind regards
Norman Moulsley

Hi Norman - because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

[none] on center of page when printing from CS5

All of the sudden a [none] is printing accross everything I print from CS5. There is no error message and the print goes through without a problem.
I can print from MS word and other programs without a problem. I'm printing to an HP3800 and my OS is Win7.
Any help would be appreciated!

I did the ctrl-alt-shift pressed while starting photoshop. I also uninstalled the only plugin I had installed.
Below is the last bit of information from the Help -> System Info....
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
   Access CS Live
   CS Review
   CS News and Resources
Installed TWAIN devices: NONE
Guess it could be a font issue. What do you reccomend for font validation (OS win7)? Found this info on MS website. http://www.microsoft.com/typography/fontvalidator.mspx
NOTE: The proof I am currently trying to print is flat....
UPDATE: I am able to print the same document from CS6 on a mac without issue.

Just purchased HP 8610 printer, but it won't print from my 8.1 windows computer

just purchased HP 8610 printer, installed it wirelessly to my network but it won't print from my 8.1 windows computer. I can print from my cell phone and I can print using the eprint function, but even though I can see it on the network I can't get it to print a document.

Hi,
Have you ilstalled it software and drivers on your computer yet ? Please download and run the following tool:
http://ftp.hp.com/pub/softlib/software12/COL50849/mp-136589-1/HPPSdr.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Printer won't print from a copy.

Printer won't print from a copy or from computer. Goes through the motions but have blank page. HP Officejet 6600
It was working fine and then had a message that the ink cartigages were bad, so I replaced them. Went to Set-up, tools, cleanprinthead when that finished I aligned printhead, but it didnt print the alignment page. It is a HP Officejet 6600

Hi @happyhunter11
Please make sure your firmware is up to date; Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
If you have the latest update and the issue remains, call us. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP 4500 won't print from my Dell Inspirion Laptop

My new HP 4500 wireless all in one printer won't print from my Dell Laptop running Vista Home Premium. It did for awhile but
only if I left the printer on. The IP address kept changing for some reason. Now, it will not print from my Dell laptop at all. It will
print from desktop computer running XP but it is connected via a USB cable. This printer is definitely not "plug and play". Anyone
have any ideas how I can get it to work with my laptop? I bought this wireless printer for that reason only.
Best Regards,
Mike

It looks like the printer is not on your network properly. The clue is that the printer's IP address is 169.254.x.y.
You are running a ADSL connection, right? Who is your ISP?
Turn off the printer and your computers and finally turn off the Netgear router. Unplug the telephone line (this is important) from the Netgear, wait 30 seconds and turn on the Netgear. Wait another 60 seconds and turn on the printer.
What is the IP address of the printer now? If it starts with 169.254.x.y, then the printer is not properly on the network. If you got a different IP address (one that starts with 192.168.x.z or starts with 10.x.y.z), turn on one of your Macs (but leave the telephone line disconnected).
Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address plus an offset. For example, if the printer's IP address is currently 192.168.0.5, then use 192.168.0.30.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the Netgear wireless-router and reconnect the telephone line. Now turn off the printer and all computers connected to your network. Wait 60 seconds then turn on the wireless-router and then turn on the printer. Then turn on the computers.
Finish up by installing the SW on the Macs. Since you're running Snow Leopard, simply go to the Print & Fax System Preference and press [+] to add the printer.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't.

My HP Photosmart 6520 won't print from my chromebook. It use to, but now it won't. Please help!

Hello,
Is your printer connected to a wireless network with Internet access?
Do other web services work on the printer? Meaning, can you use ePrint or the Printables on the front panel? (printables = apps on the printer like Disney, Menu Planner, Quick Forms, and so on.)
Miles
HP Employee

HT4356 I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE. IT IS NOT ON THE ABOVE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK.

I GOT AN EPSON WP-4533 WHICH HAS AIR PRINT AND PRINTS FROM MY MAC AND MAC BOOK W/O PROBLEMS, BUT WON'T PRINT FROM MY IPHONE. PROBABLY BECAUSE IT'S NEW IT'S NOT ON THE APPLE LIST OF PRINTERS, BUT BOTH EPSON AND APPLE SAID IT WILL WORK. ANY THOUGHTS

Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2)

Why can't I print from CS5? Mac and Snow Leopard

I can't print from CS5. I have a Canon Pro 9000 MKII, and all drivers are up to date. Whenever I need to print I have to close the image and reopen it in CS4. I have an iMac running Snow Leopard and can print from all other programs.
When I do try to print from CS5, I get a dialog box (see attached). If I click the "Cancel" button (the only option) the print command in the menu is grayed out until I restart CS5. Any thoughts would be appreciated.

One other thing to try is changing the name of the printer queue, which may convince Photoshop and the system that it's a different printer, so old print settings will not be used.
Open your System Preferences, select "Print & Fax", and then select your printer.
Click the "Open Print Queue..." button. When that opens, select the "Printer Setup" icon (it should be rightmost in the top row), and then change the name of the printer. and OK.

New oj5745 won't print from dell laptop using Windows 10

New HP OJ5745 won't print from laptop using Windows 10. Set up is wireless. Norton firewall shutoff during set up. Uninstalled all HP products and reinstalled new printer program. Printer acknowledges connection to wireless network. Printer shows up as default device on laptop. When print command is sent, the printer indicates whirling circle but no results. Bought printer yesterday. Should I return it?

Hi , Welcome to the HP Forums! I see that you cannot print with your HP Officejet 5745 on your Windows 10 PC, and I am happy to help! To verify the printer's hardware is functioning, are you able to make copies from the scanner glass? Copying Documents or Photos with an HP ENVY 5640, 5660, 7640 e-All-in-One, HP Officejet 5740 and 8040 e-All-in-One Printer Series. Have you completed the hardware setup before trying to print from the computer? As shown in this guide, Set Up an HP ENVY 7640, Officejet 5740, or Officejet 8040 e-All-in-One Printer. If you are able to make copies, and completed the hardware setup, then try the steps within this guide, 'Offline' Printer Status Message Displays (Windows 10), and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

10.6.7 won't print from CS5

Similar Messages

Maybe you are looking for