10.6.8 combo & 10.6.7 pdf fonts problem

Does the 10.6.8 update combo correct the pdf fonts problem that was inherent to 10.6.7? After a couple days of stress I had to do the lengthy 10.6.7 uninstall process in order to refine my doctoral dissertation. This has made me gun-shy & fearful of updates. Is it safe to update now?

The combo should fix your problem. As always have a back-up in case you have to revert.
The Font update came out to fix the problem in 10.6.7
http://support.apple.com/kb/DL1377
It should be rolled into the Combo-Update:
http://support.apple.com/kb/DL1399

Similar Messages

Pdf fonts problem in 10.6.7 - resolved in 10.6.8 combo update?

The pdf fonts problem in 10.6.7 forced me to go through the long uninstall process after a couple days stressing over what the problem was -- it was Adobe tech support that finally informed me what the problem was. Is the problem fixed in the 10.6.8 combo update? Since I got no replies when I asked this question a different way yesterday, can anyone say (for helpful answer points) whether Apple would be inclined to answer this question if I just call them up (i.e., without existing AppleCare)? Any other suggestions for getting official support on this question? As it stands, I fear updating at all, and could be stuck with 10.6.6 for a long time.

The combo should fix your problem. As always have a back-up in case you have to revert.
The Font update came out to fix the problem in 10.6.7
http://support.apple.com/kb/DL1377
It should be rolled into the Combo-Update:
http://support.apple.com/kb/DL1399

PDF font problem on Solaris (Reports9i)

Hi.
We are recently moving our application from 9ias Release 1 to 9ias Relese 2. After several configuration problems I was managet to get most of it to running, but encountered big problem with Reports. In Reports6i we used font aliasing, and included several modified fonts with AcrobatReader3. With AcrobatReader5 it's not posible because of more strict checking of PDF standard.
Then of course with Reports9i we start using PDF font subsetting. After added several ttf's (Arial, Courier New, Times New Roman) it started working fine with one exception. Report created with plain Courier New 10pts is not subsetted - in pdf i receive fixed-bold 12 pts.
It happening only with this one size of font. Courier New with size 10 pts and bold or italic looks good. When I change size to 9 or 11 pts - it's ok. I've checked if fonts existed in Xserver - they are.
I double checked uifont.ali - it's ok. I've temporarily solved the problem by changing font in builder on Windows from Courier New to Courier (same size), and then everything works ok. Of course it might be solving - but for the amount of work (about 200 reports) I'm looking for more 'normal' solution.
Any ideas?
Reports server working on Sun Sparc Solaris 5.8, 9ias Release 2 (Patch 2).
Builder works on WindowsXP, 9ids Release 2 (Patch2).
Czesiek.

Reports 6 or Reports 9? Note that Reports 6 does not generate
syntactically correct RTF for Unicode characters.
We've been running with a postprocessor to correct the RTF and
to change the Oracle-set font to Arial; I'll be watching to see if
there's a better way since our postprocessor shouldn't be needed.
-- allan

IPad export to PDF font problems

Hi guys, would really appreciate any help you can provide on the following:
So I can happily create wonderful documents on pages or keynote. The issue is when I export then to PDF which is by far, what I think is the best option as it seems to retain the layout and picture options etc, it. Seems that when I email this to people who don't have mac's the fonts on the PDF cannot be viewed.
It seems that basic fonts are ok like arial, but anything that is somewhat interesting like apple gothic or even helvetica cannot be displayed.
Does anyone have a solution to this, ie. Is there somewhere I could direct people to go to download apple fonts, or worse case is there anyway I can print from my pc, retaining the font.
Many thanks for any replies....

Unfortunately, the feedback link is next-of-kin to useless. Getting no response from them, and not knowing how many others have similar complaints is just pi**ing in the wind. If I am going to go to all the trouble to analyze a problem in detail and document the parameters, I am not going to just "throw it over the fence" and hope for the best.
To that end, I just got off the phone with Apple Support. They are aware of the problem and have a team working on it.
After discussing the issue at length, it seems that the best work-around is to use the iwork.com sharing gimmick. View the files from a browser and print (if needed) from the browser.
You cannot use the "download as PDF" from iwork.com, because it generates corrupted PDFs, just like iPad does.
It is also possible to be VERY selective about the fonts that are used when creating a document from scratch, but there is no easy way to know which fonts will work and which ones generate embedding errors.
In my experience, most of the new document templates will NOT work.
Anyway, the upshot is that there will be an update to the iPad Apps that will fix the problem. They do not know when that will be.
It is suggested that the more complaints that they get about the issue, the faster it will be fixed. It is POSSIBLE that the feedback link may do something in this regard.
If this issue is important to you, I would suggest taking the time to visit
http://www.apple.com/support/expert/
and talk to a real, live, human being about the problem.

Adobe PDF Font problem

Im using Adobe reader on a MacBook running Lion OS X v 10.7.3 and printing on an Epson Artisan 837. I cant print a PDF without the font printing in one location as if all vharacters are stacked on on top of the other.

Arial is one of the fonts that is not embedded by most of the job options in distiller. Create a new joboptions file that allows arial to be embedded.

Pdf font problem

Good afternoon to everyone I have a problem with this pdf article http://hotfile.com/dl/86909478/7a0c189/Eye_10_DuoTrav_vs_Xalacom_24-hr_XFG.pdf.html when I use acroread 9.4-1 maverick, at first I get this message: `Cannot extract the embedded font IODIOB+AdvFrutiger-L. Some characters may not display or print correctly.` and the result is strange font in specific parts of the article (eg at the part of the authors), though the main structure of the article has not been disturbed. using evince or okular things are worse and the problem relates to whole article including the structure. using pdftohtml, the browser reads exactly as acroread. using pdfedit and then gedit to open it as html the problem seems more complicated and I get reports for a large number of repeated errors: Error: Couldn't create a font for 'IODIOB+AdvFrutiger-L' Error: Couldn't create a font for 'IODIOC+AdvPalB' Error: Couldn't create a font for 'IODIPI+AdvPalR' My OS is Linux Mint 10 64bit Any ideas?

woopit wrote:
How about if I set security feaures-would they still be able to open it in Illus?
The "security" features of PDFs are totally illusory.
There are readily available, legal programs that will circumvent them. For instance: with PDFKeyPro I can create a decrypted, completely unsecured copy of any encrypted or "secured" PDF you care to throw at me in a matter of seconds.
So, it all depends on how determined they are.

PDF Font Problems

I am exporting an Adobe InDesign file to a PDF. When I take the PDF file to computers other than my own to print, fonts get messed up and lost. How can I correct this problem?

Not sure about where to find this in InDesign but when converting a Word document to PDF you need to go into File > Options > Save > Embed fonts in the file.
I would imagine that InDesign has a similar setting.

Bursting Program PDF Fonts different from Report Program PDF

We have designed a new XML Publisher report which uses bursting mecahnism to send out the output pdf to supplier. The report rdf completes successfully and generates the pdf with right fonts (Font Mapping configured in XML Publisher Administrator). AfterReport trigger of this report triggers the bursting program. This program sends out the pdf to the right recepients. But this pdf that comes through mail has different fonts then what it was in the output of first program. Can some one guide on how to get the same pdf fonts through bursting email file that is similar to the one that was generated through Report Program. Any help will be highly appreciated.
Thanks,
Mohammadi

Anyone who can throw light on this?
Thx

Good day, I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.

Good day,
I have installed Acrobat DC, and would like to combine 2 files. One is excel allready converted to PDF - No problem. The other one is from Pastel mailed as PDF.
When trying to merge the files, this file ask for a Password. No password was issued from the setup or mail?

Good day abrieb93050306,
I can understand your concern, however can you please let me know that are you able to open both the PDF files ( the one you converted form excel to pdf & the other pdf that was mailed to you ) individually without using any password?
As it asks for the password, it means that the postal mailed PDF is password protected. You can ask for the password from the sender of the postal mail & then try to combine the files.
Please follow the steps in the provided KB doc.to combine the files : Combine files into single PDF | Adobe Acrobat DC tutorials
This will probably resolve your issue.
Let me know if you still experience any issue.
Regards,
Aadesh

PDF print problems Preview Fails but Adobe Reader works?

Hello All,
I'm having issues printing pdf documents, it appears to be a Font problem, that is when I print from Apple's Preview 7.0 the document prints, but the spacing of characters is wrong, some symbols are missing etc. When I print from Adobe Reader 11.0.07 the documents look normal.
More Details: All pdfs generated using Latex fail this way, so it might be an issue there. PDFs generated from iWork's Pages 5 print fine UNLESS I copy the Latex images into them then they print incorrectly again.
I suspect the issue is with Apple's Preview missing a font, although I'm not sure that's it nor how to fix it. Adobe prints without any issues at all.
I am using OS 10.9.4 on a 2009 iMac. I am printing to a HP Laserjet M4555 over Bonjour Service.
Thank you for reading,
DrD

Hello Eric,
Unfortunately this has not solved the problem. I ended up disabling them all and ultimately deleting the duplicates. Adobe works so that is my work around for now, although I prefer Preview.
I appreciate your help,
DrD

Create a pdf font catalog

Hello,
anyone know is there a freeware that can create a pdf font catalog?
I use theTypeBook to create printed font catalog for all the fonts but takes a lot of space,
now would like to recreate it in pdf format but don't want to scan them all.
Thank you

Hi, B_L. Create your catalog in TypeBook, then choose Print, and in the Print dialog box, click the Save as PDF button.

PDF and Font Problems 10.6.8

Ugh.
MBP13 7,1 (mid 2010) 2.4g C2D 4G Ram
I use Vectorworks 2011 to produce CAD drawings for customers and the plant. Recently I began having issues with my PDFs of my CAD not being fully distilled - various issues but primarily most dimensions not visible. I have read that PDF issues cropped up beginning with 10.6.7 and that certain PS fonts can be the issue. As well as outdated PDF readers used by my recipients. In a short-sighted fit of frustration I began monkeying with Font Book and Font Caches.
My maladies are
1. My PDFs are incomplete
2. Received MS Office filed open "blank". Now MS OFFICE 2011 no longer has common Fonts such as Arial and Times Nee Roman.
Can I fix this or do I need to go back to 10.6.6 and reinstall Office?
Thanks in advance.
BTW this forum is surprising difficult to nav on an iPhone.

MS Office font Problem solved in case anyone else stumbles upon this.
http://hints.macworld.com/article.php?story=20110810001909244

Illustrator cs6 + msword to pdf + links problem

Hello!
BACKGROUND:
I have a TABLE that I need to inserted into my ILLUSTRATIOR file.
Whatever method I'm using is failing as the text comes in but NOT the table.
Instead, I just do this: MSWORD > Print PDF > in Illustrator > Place PDF.
PROBLEM:
But when I want to make CHANGES TO THE PDF (changes in MS WORD DOC - REprint to PDF). The PDF file does NOT show up in the LINKS Box.
Therefore, I can't UPDATE it. I'm always having to re-insert the PDF file -- INSTEAD of like the other files PSD, or .JPG, or whatever else gets UPDATED.
QUESTION:
WHY DOES THE PDF FILE not like the OTHER files that just hang out and can be updated in the LINKS box?
Thank you,
M>

I'm using PC... but the LINK selection was NOT CHECKED.
Funny. I never checked that when I placed all the other IMAGES -- like ever.
Thanks, Larry, that's exactly what needed to be done!!!!!
SOLUTION: PLACE > Check LINK box. Done.

Help - PDF Attachment Problem

Hi,
Receently, some of our users experienced pdf attachment problem. The user sent a 4mb pdf attachment but after the mail was sent out it only showed 4k in sent item. When the recipient received the e-mail the attachment also showed 4kb and it can't be opend too. These users are using Outlook 2000 and our Exchange server is 2000 Enterprise.
Thanks for the help,
JY

Hi Suresh,
I just tried this thing in my systtem and it is working... BADI is trigerred everytime there is a change in the PO... even when you release there is a change in the PO so this BADI will be triggerred....
I suggest you should implement BADI in your dev system and place a break point in the POST method...
After that create a PO and release it using ME29N... thereafter when you save the PO... this method will trigger and you will have access to PO details...
PS: Remember this BADI wont work for transaction ME29...
Regards
Gautam

Pdf attachment problems on osx lion

Hello
i was wondering if apple has fixed the pdf attachment problem seen on other iOS' such as 7.1. I get the same error (blank pdf file, white screen), however, it doesn't happen all the time.
any explanations and comments would be greatly appreciated!

OS 7 or IOS 7?
If IOS 7, try the iPad community.
iPad Community

10.6.8 combo & 10.6.7 pdf fonts problem

Similar Messages

Maybe you are looking for