10.6.8 Date/time stopped working

Hi, suddenly my date/time icon in the top bar is frozen at last Monday at 17:24. I checked my Pref but it seems properly set up.
--In fact all my Apple OS icons on the top right are giving me the SPOD.
Third-party software with icons up there works fine like Sophos and Dropbox.
Any clues? THanks!
Mac Mini, 10.6.8

Sorry to have troubled anyone, a good reboot was all it needed. I hope.

Similar Messages

  • HID DATA has stopped working

    I have a 15 month old HDX16 laptop running Vista 64 bit. I've just bought Microsoft bluetooth 5000 mouse, having seen favourable reviews for it. Connected fine to the bluetooth, but at the same time I got message HID DATA has stopped working. The mouse continues to work fine during the current session, but needs reconnecting when the laptop is restarted rather than just being able to turn it on and use straight away. Does anyone know a fix for the 64bit OS? Elsewhere in google it seems to be a known problem, but no obvious fix? What is it with MS products on HP? Last year it was the Intellitype s/w that conflicted with the media strip causing Excel to launch; now this. Very frustrating.

    Have now tried the sim in a C6-01 and there were no problems al at all with data connection. So now I'm guessing that there's a problem with the APN for this sim in the Lumia. Unfortunately the Network Setup app runs ok but is not fixing the problem.
    If I reset the phone to clear the APNs, should I reset it with the sim in or out?
    Also, on the subject of resetting, my problem seems to be the same as the one detailed here:
    /t5/Nokia-with-Windows-Phone/APN-configuration-problem-Lumia-800/m-p/1232545/highlight/true#M1713
    ...but in their case resetting did not fix the problem.
    Please please, anybody know what's going on here and now to fix it?  Surely sombody from Nokia must understand what is going on?
    Thanks,
    Matt

  • Data services stop working after updating to new OS version for Q10

    I am from Qatar, after i updated my device ( Q10 SNQ100-3 ) to new OS ( 10.2.1.537 ), the mobile data services stopped working, but it works everytime I connect to wifi. This is the same with Z10. Please need help.

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive
    2) Reboot
    Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Portege - Reel Time stop working with Adobe Reader X

    When I installed adobe reader x (to replace adobe reader 9) reel time stopped working - any advice as to how to install reader x without affecting reel time?

    Hi profpgsmith,
    Probably you must update Toshiba Reel Time as well?! After Adobe Reader X installation I would update Reel Time too that can be downloaded on official Toshiba website.
    Furthermore I would also run CCleaner that is a freeware cleaner to delete old registry keys and keep the registry clean.

  • IPhone 5 data network stops working when using GPS

    Hello,
    I have a strange problem for some time now. The DATA connection in GPS apps stop working when navigating. When I use Google maps or WAZE apps the first time after rebooting the device, everything is working just fine for first address search, but after beginning the navigation, DATA network disappears only for the navigation app, browsing is working just fine (a bit slowly, but fine).
    Tried to factory reset the device few times, and changed the carrier provider, didn't help
    Any ideas??? 

    Hi liokap,
    Welcome to the Apple Support Communities!
    I know that it can be frustrating when applications you downloaded from the App Store do not function as expected. In this situation, I would recommend working through the troubleshooting steps in the attached article.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Have a great day,
    Joe 

  • Reposting External Form Data has Stopped Working

    Hi,
    Admittedly, I have not kept up with the release notes, but has anything changed in the process of reposting external form data to Eloqua? I have three .Net applications that were working up until a couple of weeks ago (around October 8th -- I'm not sure what pods they are on). FWIW, here's the place where the page times-out while trying to post the data:
    Using stream = web.GetRequestStream()
         stream.Write(postdatabytes, 0, postdatabytes.Length)
         stream.Close()
    End Using
    I am passing the siteID and FormName, so I'm perplexed as to why this suddenly stopped working.
    Any clues?

    Have now tried the sim in a C6-01 and there were no problems al at all with data connection. So now I'm guessing that there's a problem with the APN for this sim in the Lumia. Unfortunately the Network Setup app runs ok but is not fixing the problem.
    If I reset the phone to clear the APNs, should I reset it with the sim in or out?
    Also, on the subject of resetting, my problem seems to be the same as the one detailed here:
    /t5/Nokia-with-Windows-Phone/APN-configuration-problem-Lumia-800/m-p/1232545/highlight/true#M1713
    ...but in their case resetting did not fix the problem.
    Please please, anybody know what's going on here and now to fix it?  Surely sombody from Nokia must understand what is going on?
    Thanks,
    Matt

  • Face Time stopped working after 10.9.5 update

    Have been on with Tech support in a chat, but was unable to resolve the issue.
    Now I can not get back on in a chat, the option is no longer on the screen.  I am not in a location where phone calls are possible so chat is the only way to get assistance.  Does anyone have any suggestions?

    My challenge is that when 10.9.5 was installed, it stopped Face time from working.  I can no longer log in.  Get a continuous loop from log in to verify back to log in.
    I have read that others have had this issue at various times over the past year, but no solution have been posted

  • Date & Time & Duration - working week adjustment

    Hi there,
    I have been working on an adjustment for time contract sheet.
    I have an agreed completion date for a contract. Data format is Date & Time
    I have a certain amount of days approved for adjustment of time, anywhere between 1 and x amount of days. Data format is Duration
    I have an adjusted date of practical completion. Data format is Date & Time. SUM of 1. + 2.
    I get the desired result - but only based on a 7 day working week.
    What do I need to implement to allow for a 5 or 6 day working week only?
    Example (based on a 5 day working week):
    Agreed completion is Monday 16 December 2013
    Approved adjustment of time is 6 days
    Adjusted date of practical completion shows Saturday 22 December 2013, however I need it to allow for the weekend and therefor my required adjusted date of practical completion should show as Tuesday 24 december 2013.
    Any help very much welcome.
    Merry Christmas,
    Patrik

    Hi Patrik,
    Although NETWORKDAYS may help, it's actually working in the oposite direction from which you want.
    NETWORKINGDAYS will tell you the number of working days between two date. You want to determine an end date, given one date and a the number of working days to the other date.
    Here's a possibility. It is set for a five day work week, with Saturdays and Sundays off, and does not accoult for additional 'exclude dates.' Adjustment days in the example were set to have the same adjusted completion date for each week of (original) completion dates.
    There are two conditions to account for:
    Each multiple of five adjustment dates will require two additional adjustment days to accomodate the weekend.
    The expression 2*INT(C2/5) is used to insert these sets of two days.
    The first IF expression determins if the adjusted completion date is needed. If no entry has been made in column B, the calculation is suppressed, and column C is left appearing blank.
    IF(LEN(C2)<1,"",rest of formula)
    If you want to see the original completion date rpeated in column C when no adjustment days have been added, replace the pair of double quotes in the (full) formula with B2
    If the adjusted completion date (including the sets of two days added above) falls on a Saturdy or Sunday, OR if it falls on a weekday that is earlier in the week than the original completion day, a single pair of days will also be required to adjust for the crossed weekend.
    The OR statement in the second IF expression triggers insertion of these two days.
    OR(WEEKDAY(B2+2*INT(C2/5)+C2,2)>5,WEEKDAY(B2+2*INT(C2/5)+C2,2)<WEEKDAY(B2,2))
    Formula inserted in D2, and filled down.
    D2: =IF(LEN(C2)<1,"",B2+2*INT(C2/5)+C2+IF(OR(WEEKDAY(B2+2*INT(C2/5)+C2,2)>5,WEEKDAY (B2+2*INT(C2/5)+C2,2)<WEEKDAY(B2,2)),2,0))
    Regards,
    Barry
    Table and formulas constructed in Numbers '09 v2.3

  • Pre time stops "working" when screen dims/locks

    the time on my pre stops "working" when the screen dims/turns off - what i mean by this is that when I wake up the phone the "old" time (time that i last had the phone awake) displays and then quickly updates to the current time.
    The worst part about this is that alarms will not work because it does not know the real time when the screen is off!!
    If the phone is on the touchstone everything works fine
    can anyone help!!!?
    thanks, Gavin
    Post relates to: Pre p100eww (Sprint)

    Hello Gavin and welcome to the Palm forums.
     What trouble shooting steps have you tried so far?  Have you tried restarting the phone?  Reloading webOS using the webOS Doctor tool?
    Alan G

  • Automatic Date & Time not working in Pages 5

    I have some templates that I had created with Pages 09 which have Date & Time fields that are set to auto update.  When I open those templates in Pages 5, the dates are displayed as 7 days in the past.  When I right-click on the field to edit it, I don't see any such option to edit the date like I did in Pages 09. 
    So I tried inserting a new Date & Time field.  This inserts today's date as expected, but there is still no way to edit the date in any way (formatting, auto update option, etc.) that I can find.  Is this a bug, or am I missing something?

    It might be that you need to recreate your document and tables in Pags 5 and then resave it as a template.  Pages '09 gave an "update on open option" with a date insert wich is not there in Pages 5.  So simply insert the today() or now() function into a table cell in Pages 5 and it will update to the current value.  When you select the cell in the table with either of these functions, the Format inspector Cell tab gives you the option to format these calculations further.

  • Automatic date & time not working on my iPhone 4S

    Anyone got any ideas on why, when I set date & time to change automatically, does my iphone 4s revert to London time regardless of where I am?

    Switch to manual and the time where you are. Do it several time then return to automatic. Correct time should stand

  • All of a sudden my Face Time stopped working - I even changed my password but it still doesn't work.  Any suggestions?

    How can I get my Face Time to work again?

    Hello there, joanne88.
    The following Knowledge Base article offers up some great steps for troubleshooting FaceTime:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Data just stops working?

    I've had this issue my last two refills on my Lumia 635 Gophone. Data will work for about a week, then it'll just...stop until my next refill. I'm not coming anywhere close to my limit on high-speed, and my plan includes unlimited data. I don't understand and it's getting pretty frustrating only having data access for a few days for whatever reason.

    That isn't right, and very inconvienient.
    Please message

  • My cellular data has stopped working after updating to ios 6.1, i need help, urgently...!!!

    This is just crazy, i just updated and now nothing works...whats wrong with apple developers, i m stuck here now! what do i do...such thing is now happening so frequently, i am never goin to get another apple product here after, I just stupid!!!! cant believe this..!

    Have you tried restarting or resetting your iPHone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • Date range stops working when I add record selection criteria

    I have a simple report, using only nine fields, from four tables, plus two date parameter fields that I use to set a date range:
    SELECT "Job"."Job", "Job_Operation"."Vendor", "Customer"."Customer", "Job"."Part_Number", "Delivery"."Promised_Date", "Job_Operation"."Status", "Job_Operation"."Sched_End", "Job_Operation"."Sched_Start", "Job_Operation"."Operation_Service"
    FROM   ("TECH"."dbo"."Delivery" "Delivery" INNER JOIN ("TECH"."dbo"."Job_Operation" "Job_Operation" INNER JOIN "TECH"."dbo"."Job" "Job" ON "Job_Operation"."Job"="Job"."Job") ON "Delivery"."Job"="Job"."Job") INNER JOIN "TECH"."dbo"."Customer" "Customer" ON "Job"."Customer"="Customer"."Customer"
    WHERE  (("Job_Operation"."Sched_End">={ts '2013-08-05 00:00:00'} AND "Job_Operation"."Sched_End"<{ts '2013-08-08 00:00:01'}) AND "Job_Operation"."Status"='O' OR "Job_Operation"."Status"='S' AND "Job_Operation"."Operation_Service"='150-170 SS' OR ("Job_Operation"."Operation_Service"='150-170 ST' OR "Job_Operation"."Operation_Service"='60-180' OR "Job_Operation"."Operation_Service"='180-200 SS' OR "Job_Operation"."Operation_Service"='180-200 ST' OR "Job_Operation"."Operation_Service"='200-220 ST' OR "Job_Operation"."Operation_Service"='F-1.1923'))
    ORDER BY "Job"."Job"
    When my record selection formula is
    {Job_Operation.Sched_End} IN {?StartDate} TO {?EndDate}
    AND
    {Job_Operation.Status} = 'O' OR {Job_Operation.Status} = 'S'
    the date range works.
    However, when my record selection formula is
    {Job_Operation.Sched_End} IN {?StartDate} TO {?EndDate}
    AND
    {Job_Operation.Status} = 'O' OR {Job_Operation.Status} = 'S'
    AND
    {Job_Operation.Operation_Service} = '150-170 SS' OR
    {Job_Operation.Operation_Service} = '150-170 ST' OR
    {Job_Operation.Operation_Service} = '60-180' OR
    {Job_Operation.Operation_Service} = '180-200 SS' OR
    {Job_Operation.Operation_Service} = '180-200 ST' OR
    {Job_Operation.Operation_Service} = '200-220 ST' OR
    {Job_Operation.Operation_Service} = 'F-1.1923'
    the date range doesn't work. Instead, the report returns records with all kinds of {Job_Operation.Sched_End} dates.
    What could be the reason?
    Thanks,
    Matteo

    Hi Matteo,
    Try this as the selection formula:
    {Job_Operation.Sched_End} IN {?StartDate} TO {?EndDate}
    AND
    ({Job_Operation.Status} = 'O' OR {Job_Operation.Status} = 'S')
    AND
    {Job_Operation.Operation_Service} = '150-170 SS' OR
    {Job_Operation.Operation_Service} = '150-170 ST' OR
    {Job_Operation.Operation_Service} = '60-180' OR
    {Job_Operation.Operation_Service} = '180-200 SS' OR
    {Job_Operation.Operation_Service} = '180-200 ST' OR
    {Job_Operation.Operation_Service} = '200-220 ST' OR
    {Job_Operation.Operation_Service} = 'F-1.1923'
    -Abhilash

Maybe you are looking for

  • Lost import from camcorder

    I imported my film clips from my camcorder and then lost them. Where are they?

  • 0IC_C03 InfoCube Issue?

    We are having an interesting issue with the 0IC_C03 material movements cube.  We ran the initial, "BX", load near the end of January, on the 26th, and the data ties out to R/3 on that day.  After loading the deltas though "BF", when we attempt to tie

  • Msi k9n2gm-fd no sound

    Hi. I had sound until my realtek ethernet card went dead so i used the onboard ethernet.. now i have no sound from onboard sound card need help thnx

  • How to plaot a 3d surface Can we plot it if we have the surface coordinates in the form of text file?

    Hi I have the co-ordiantes for a 3 dimensional surface and I want to plot it using labview. Can some one help me & tell me the way how to feed in the co-ordinates in the  3d surface?

  • Libsystem.B.dylib  missing file

    When starting up Compressor it crashes out because it can't find the file /usr/lib/libsystem.B.dylib Does anyone know where this file comes from and how I can install it. I have tried a reload of OS 10.5 but the file is still missing.