10.6.8 password service consuming memory

I have a Mac Pro running 10.6.8 Server. The password service has suddenly started consuming large amounts of memory - 5.1GB of real memory and almost 40GB of virtual - this has spilled over into the swap space and this is growing at about 2GB per day.
I am up to date will all software updates. I have unloaded/stopped all third party software. This box is just running the Open Directory and some file shares.
Any suggestions on a fix would be greatly appreciated.

hi i tried tks but same problem.
1st my mail does not accept to go on IMAP as per this setting for OS 10.6.8 !
2nd only thunderbird works now as per easy setting on my 10-6.8.
3rd the solution to launch lion fine but i also review some problems as per the same password problem asked wrong.
4th my password are update and perfect for apple as capital and numeric !
but tks so much for your help !
conclusion i'm not able to solve this problem i'll look other solutions than mail as i'm not ready to go to lion as i get some soft not run under lion or require expensive update.
i'm mac user since.... but i'll study windows 8 now as apple are becoming same as windows so i'll now be open mind , why dispoint us like this.
i also pay mac.com since we lost some great functions before like sending greetings cards, and now we will loose idisk i can't send files like before so what's the point to pay for an icloud wish are great but cancel so much great functions !
i wish here in china the chinese will launch an operating system to put compeittion and create the buzz ! in this monopole windows apples
pascal

Similar Messages

Password service won't start

Following an unplanned hard restart of our server (Mac OS X 10.9.5, Server 3.2.2), the password service won't start, so our staff can't log into mail, calendars or file sharing.
When I launch Open Directory, the main window has the message "Unable to load replica list", then it switches itself off after a minute or so.
I've looked at the certificates in Server and they have the green tick so presumably are OK.
DNS is working OK and running the command "sudo changeip -checkhostname" reports success.
Here's the section of log that repeats every few seconds as PasswordService repeatedly starts up and exits:
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService[5890]) Exited with code: 1
13/03/2015 20:55:00.617 com.apple.launchd[1]: (com.apple.PasswordService) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:02.540 xscertd[249]: Failed sending LookupCRLByCARecordName command to com.apple.xscertd.helper: The operation couldn’t be completed. (com.apple.certificateserver error 42005.)
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd[5894]) Exited with code: 1
13/03/2015 20:55:08.708 com.apple.launchd[1]: (org.openldap.slapd) Throttling respawn: Will start in 7 seconds
13/03/2015 20:55:10.206 xscertd-helper[5897]: ldap_search_ext_s returned -1 - Can't contact LDAP server when searching for bdb suffix, exiting
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper[5897]) Exited with code: 1
13/03/2015 20:55:10.207 com.apple.launchd[1]: (com.apple.xscertd-helper) Throttling respawn: Will start in 10 seconds
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.639 PasswordService[5901]: -[PasswordServerPrefsObject loadXMLData]: Unable to locate passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject getSearchBase]: Unable to locate search base: -1 Can't contact LDAP server
13/03/2015 20:55:10.640 PasswordService[5901]: -[PasswordServerPrefsObject saveXMLData]: ldap_modify_ext_s of the passwordserver config record's plist attribute: -1 Can't contact LDAP server
13/03/2015 20:55:10.684 PasswordService[5901]: int pwsf_GetPublicKey(char *): ldap_search_ext_s cn=authdata for Public Key returned -1
13/03/2015 20:55:10.687 com.apple.launchd[1]: (com.apple.PasswordService[5901]) Exited with code: 1
I have backups (both Time Machine and clones of the hard drive) that I could use to restore the corrupted bit of the configuration, if necessary, but I don't know what to restore.

Many Open Directory problems can be resolved by taking the following steps. Test after each one, and back up all data before making any changes.
1. The OD master must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; e.g., Ethernet and Wi-Fi.
2. You must have a working DNS service, and the server's hostname must match its fully-qualified domain name. To confirm, select the server by name in the sidebar of the Server application window, then select the Overview tab. Click the Edit button on the Host Name line. On the Accessing your Server sheet, Domain Name should be selected. Change the Host Name, if necessary. The server must have at least a three-level name (e.g. "server.yourdomain.com"), and the name must not be in the ".local" top-level domain, which is reserved for Bonjour.
3. The primary DNS server used by the server must be itself, unless you're using another server for internal DNS. The only DNS server set on the clients should be the internal one, which they should get from DHCP if applicable.
4. If you have accounts with network home directories, make sure the URL's are correct in the user settings. A return status of 45 from the authorizationhost daemon in the log may mean that the URL for mounting the home directory was not updated after a change in the hostname.
5. Only if you're still running Mavericks server, follow these instructions to rebuild the Kerberos configuration on the server.
6. If you use authenticated binding, check the validity of the master's certificate. The common name must match the hostname and domain name. Deselecting and then reselecting the certificate in Server.app has been reported to have an effect in some cases. Otherwise delete all certificates and create new ones.
7. Unbind and then rebind the clients in the Users & Groups preference pane. Use the fully-qualified domain name of the master.
8. Reboot the master and the clients.
9. Don't log in to the server with a network user's account.
10. Disable any internal firewalls in use, including third-party "security" software.
11. If you've created any replica servers, delete them.
12. If OD has only recently stopped working when it was working before, you may be able to restore it from the automatic backup in /var/db/backups, or from a Time Machine snapshot of that backup.
13. As a last resort, export all OD users. In the Open Directory pane of Server, delete the OD server. Then recreate it and import the users. Ensure that the UID's are in the 1001+ range.
If you get this far without solving the problem, then you'll need to examine the logs in the Open Directory section of the log list in the Server app, and also the system log on the clients.

Web service consumer wizard in ECC 6.0 SP17

Hi,
I'm trying to create web service consumer using the wizard. I completed the step and click finish button at the end of the wizard. However, the process is just stop there and the main menu SAP Easy Access is displayed. No objects created.
I can generate the object after clicking the finish in the wizard on ECC 6.0 SP15.
Any idea on what can I do to generate objects so I can consume the webservice?
Additional info: When I tried this on different system with SP17, I got message 'no vendor specified' after the wizard analyzing WSDL given in the url. No service provider object is created after that message is displayed. It is a success message (green).
Thanks,
Iwan
Edited by: Iwan Santoso on Feb 12, 2009 5:48 PM
Update: I had a brain ****... when selecting Create -> Web Service, there is an options for Service Consumer, which I thought this is how you generate the proxy. Actually I need to select Create -> Proxy Object. When I select the proxy object, it works just fine. A class is generated.
However, in different system, there is no option to create Web Service and Proxy Object. It's on SP17 as well. I'm going to do additional research since in that system I do not have proper auth. for SICF transaction.
Edited by: Iwan Santoso on Feb 12, 2009 7:27 PM

Hi
Q :- we activate ICF service? How?
Just goto TCODE - SE38 and run program - RSXMB_ACTIVATE_ICF_SERVICES
SXMB_ACTIVATE_ICF_SERVICES
some ICF service must be inactive
Activating ICF service is a generic requirement.
Check SAP Note 750287
Thanks !
Edited by: Abhishek Agrahari on Jan 8, 2009 9:22 AM

No result while creating a service consumer with Web Service Wizzard

Hi,
I've tried to create a service consumer with Web Service Wizzard in SE80 by using URL/HTTP Destination but nothing happens. After the popup with logondata for the WSDL I get the CRM start screen and nothing has been created in the given package.
technical details:
I use a CRM 5.0 system with SP15 (SAPKB70015).
I created the provider service at a 7.10 system with SP5 (SAPKB71005) via SPROXY, SOAMANAGER and WSPUBLISH and get the WSDL-URL from Service Registry.
The Service Registry of the 7.10 system serves as central Service Registry.
Has anybody an idea ?
Christoph

Guy,
Thanks for your reply.
This problem has been solved. Since I haven't turned on everything that to use transaction SOAMANAGER needs. After complete the switch-on works, the problem never happens again.
Thanks again.

How to use a cascading LOV as a Web Services Consumer?

How to use a cascading LOV as a Web Services Consumer?
We are trying to populate a prompt programmatically.
Our program is a Web Services Consumer.
As an example we use Island Resorts Marketing
The cascading LOV for City is
Country -> Region -> City
The City object is key-aware to the customer table
The query is
Customer | Revenue
(where) City = [prompt]
In order to make the key-awareness work, we must select the value (rowIndex) from the LOV
When we run our program below, the LOV for City is not populated, as expected since we must first select the Country, then the Region.
The code snippet below shows that the LOV for Country is populated. We have no idea how to go from there.
Any hint will be immensely appreciated.
Let us know if anything is unclear in the code.
Source
RetrieveMustFillInfo retrieveMustFillInfo = RetrieveMustFillInfo.Factory.newInstance();
        RetrievePromptsInfo retrievePromptInfo = RetrievePromptsInfo.Factory.newInstance();
        retrievePromptInfo.setPromptLOVRetrievalMode(PromptLOVRetrievalMode.ALL);
        retrievePromptInfo.setRefreshReturnedLOVs(true);
        retrievePromptInfo.setReturnLOVOnMustFillPrompts(true);
        retrieveMustFillInfo.setRetrievePromptsInfo(retrievePromptInfo);
        // *-- need the "Refresh" action to get the .promptToBeFilled
        Action[] boActions = new Action[1];
        boActions[0] = Refresh.Factory.newInstance();
        try {
            documentInformation = reportEngine.getDocumentInformation(Integer.toString(infoObject.getID()), retrieveMustFillInfo, boActions, null, null);
            m_Token = documentInformation.getDocumentReference();
        } catch (Exception ex) {
            System.out.println(GetWSError(ex));
            return;
        if (documentInformation.getMustFillPrompts()) {
            PromptInfo[] promptInfoS = documentInformation.getPromptInfoArray();
            for (PromptInfo promptInfo : promptInfoS) {
                System.out.println(String.format("Prompt '%1$s', hasLOV=%2$s", promptInfo.getName(), (promptInfo.getHasLOV() ? "Yes" : "No")));
                if (promptInfo.getHasLOV()) {
                    LOV boLOV = promptInfo.getLOV();
                    for (Value boLOVValue : boLOV.getValuesArray()) {
                        System.out.println(String.format(" LOV item '%1$s' RowIndex=%2$s", boLOVValue.getColumnsArray(0), (boLOV.getRowIndexed() ? boLOVValue.getRowIndex() : "")));
                System.out.println("--End LOV");
                PromptInfo[] promptInfoS2 = promptInfo.getPromptToBeFilledArray();
                if (promptInfoS2.length > 0) {
                    PromptInfo promptInfo2 = promptInfoS2[0];
                    System.out.println(String.format(" linked to %1$s", promptInfo2.getName()));
                    if (promptInfo2.getHasLOV()) {
                        LOV boLOV2 = promptInfo2.getLOV();
                        for (Value boLOVValue : boLOV2.getValuesArray()) {
                            System.out.println(String.format(" LOV item '%1$s' RowIndex=%2$s", boLOVValue.getColumnsArray(0), (boLOV2.getRowIndexed() ? boLOVValue.getRowIndex() : "")));
                        System.out.println("--End LOV");
Result
Prompt 'Enter value(s) for City:', hasLOV=Yes
--End LOV
linked to Enter value for Country of origin
LOV item 'Australia' RowIndex=6
LOV item 'France' RowIndex=2
LOV item 'Germany' RowIndex=4
LOV item 'Holland' RowIndex=7
LOV item 'Japan' RowIndex=5
LOV item 'UK' RowIndex=3
LOV item 'US' RowIndex=1
--End LOV

Hi,
Refer SAP Note 1278947. You would require a Service Market Place logon to access this article.
Let me know if this helps.
Regards,
Shreyans Surana

Error creating service consumer enterprise service

Hi,
I'm facing an error when creating a service consumer enterprise service using WSDL URL. I got the error message
'Exception occurred in communication framework:Error in HTTP Framework:404Not foundhttp://localhost:8000/?wsdl=wsdl0'
Does anyone have any idea of how may cause this problem ?
I've looked in existing foruns questions for a long time, and I didn't get any answer to my problem.
I'll apreciate any help.
Thanks,
Paulo Sousa

Hi,
The problem was in WSDL. It has an address 'http://localhost_8000/
They replace it by the address where the service is installed and i was able to create the service consumer.
Thanks,
Paulo Sousa

Creation of Users causes Password Service Crash

Hi All,
I somehow managed to post this in the wrong forum in PHDs - sorry about that, so am re-posting here in something more appropriate:
I have 3 Intel XServes and 2 Mac Pros on different sites which all have the same issue. When I create a user in Workgroup Manager, the following error occurs and the Password Service crashes:
"Got unexpected error
Error of type Not a known DirStatus (-1) on line 1922
of /SourceCache/ServerManagerUserGeneral/
ServerManagerUserGeneral-193.4.1/
UserAdvancedPluginView.mm"
As well as the password service crashing, it causes all other users to stop authenticating until the server is rebooted.
If I create a user with the default shortname (i.e. untitled_1) then the service does not crash. I have reinstalled the OS, replicated my build on a PPC machine with no issues but continue to have this error on the Intel machines. I have even tried installing the server OS onto an Intel iMac just to test and it does the same thing, including OSX Server 10.4.7 and 10.4.8
Has anyone else come across this or have any suggestions on what may have caused it?
Cheers,
PJR

Have just realised why my XServe does not have the "MacOSXServerUpd10.4.8Univ.pkg" sitting in the receipts folder.... the server shipped with a 10.4.8 disc so that is the 'base OS' for it.
Have just checked another server running 10.4.8 on a Mac Pro and that does have the file as originally (because it doesn't ship with the Server OS) came with a 10.4.7 Server install disc.
I have upgraded the XServe to 10.4.9 using the combo update and initial testing seems to show that it is all working properly, however this server is in an integrated environment and not authenticating users usually.
I will have to backup another server running full OD services and try an upgrade (or reinstall the pkg) on this.
Many thanks!!
PJ
--

Create Service Consumer BS: java.lang.NoClassDefFoundError

Hello,
I am trying to create service Consumer Business Service (consume a Web Service from JD Edwards Enterprise One).
To do that I have followed the next steps:
1) Download the WSDL file from CRM On Demand’s web page
2) From JDE:
a. Create a business service from OMW
b. Generate a web service proxy within JDeveloper
In this step, it was necessary rename the Business Service Package =>
A portion of the proxy package name must be in upper case; however, JDeveloper named the proxy using lower case.
I have followed “JD Edwards EnterpriseOne Tools 8.97 Business Services Development Guide” to rename the Business Service Package:
"Renaming the Business Service Package
You must rename the package so that the name matches the case of the rest of the
business service. After you rename the package, you should rebuild the code to ensure
no errors exist. Use these steps to rename the business service package.
► To rename business service package
In the business service project on JDeveloper
1. Select the business service package, and then click Replace in Files on the Search menu.
2. On the Replace in Files window, enter the lower case name (for example, jrh90i20).
3. Enter the upper case name (for example, JRH90I20).
4. In the Search Path pane, select the Active Project option.
5. Click OK.
The upper case name appears.
6. Save the renamed file by selecting Save All from the File menu.
You should rebuild the code to make sure no errors exist."
However, when I try to generate a secure proxy I have the error:
java.lang.NoClassDefFoundError --> It is trying to find the package with lower case name, however it is in upper case name…
Do you know if it is necessary to do something change more? Change some reference file or any path?
I think that when JDeveloper deploys the secure proxy, internally it has some reference with the lower case name, and it isn’t changed with “Renaming the Business Service Package”…
I am looking for some file that has some reference but I haven’t found nothing…
Any help is welcome.
The log file is:
java.lang.NoClassDefFoundError: oracle/e1/bssv/j5500007/proxy/types/crmondemand/xml/contact/query/ListOfContactQuery (wrong name: oracle/e1/bssv/J5500007/proxy/types/crmondemand/xml/contact/query/ListOfContactQuery)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at oracle.ideimpl.IdeClassLoader.loadClass(IdeClassLoader.java:129)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at oracle.j2ee.ws.common.processor.modeler.wsdl.SchemaAnalyzer.getValueClassBeanInfo(SchemaAnalyzer.java:465)
at oracle.j2ee.ws.common.processor.modeler.wsdl.ComplexTypeBindingModeler.structuredType(ComplexTypeBindingModeler.java:142)
at oracle.j2ee.ws.common.processor.modeler.wsdl.ComplexTypeBindingModeler.complexType(ComplexTypeBindingModeler.java:442)
at oracle.j2ee.ws.common.processor.modeler.wsdl.LiteralSchemaTypeModeler.complexType(LiteralSchemaTypeModeler.java:502)
at oracle.j2ee.ws.common.processor.modeler.wsdl.LiteralSchemaTypeModeler.schemaType(LiteralSchemaTypeModeler.java:380)
at oracle.j2ee.ws.common.processor.modeler.wsdl.ComplexTypeBindingModeler.processElementMember(ComplexTypeBindingModeler.java:339)
at oracle.j2ee.ws.common.processor.modeler.wsdl.ComplexTypeBindingModeler.processMember(ComplexTypeBindingModeler.java:191)
at oracle.j2ee.ws.common.processor.modeler.wsdl.ComplexTypeBindingModeler.structuredType(ComplexTypeBindingModeler.java:168)
at oracle.j2ee.ws.common.processor.modeler.wsdl.ComplexTypeBindingModeler.complexType(ComplexTypeBindingModeler.java:442)
at oracle.j2ee.ws.common.processor.modeler.wsdl.LiteralSchemaTypeModeler.complexType(LiteralSchemaTypeModeler.java:502)
at oracle.j2ee.ws.common.processor.modeler.wsdl.LiteralSchemaTypeModeler.schemaType(LiteralSchemaTypeModeler.java:380)
at oracle.j2ee.ws.common.processor.modeler.wsdl.LiteralSchemaTypeModeler.schemaType(LiteralSchemaTypeModeler.java:136)
at oracle.j2ee.ws.common.processor.modeler.wsdl.LiteralSchemaTypeModeler.schemaType(LiteralSchemaTypeModeler.java:145)
at oracle.j2ee.ws.common.processor.modeler.wsdl.SchemaAnalyzer.schemaTypeToLiteralType(SchemaAnalyzer.java:395)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.searchSchema(WSDLModeler.java:566)
at oracle.j2ee.ws.common.processor.modeler.wsdl.OperationModeler.searchSchema(OperationModeler.java:946)
at oracle.j2ee.ws.common.processor.modeler.wsdl.DocLiteralOperationModeler.buildInput(DocLiteralOperationModeler.java:525)
at oracle.j2ee.ws.common.processor.modeler.wsdl.DocLiteralOperationModeler.buildOperation(DocLiteralOperationModeler.java:256)
at oracle.j2ee.ws.common.processor.modeler.wsdl.OperationModeler.process(OperationModeler.java:93)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.processSOAPOperation(WSDLModeler.java:1094)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.processBindingOperation(WSDLModeler.java:1028)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.createNewPort(WSDLModeler.java:892)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.processPort(WSDLModeler.java:765)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.processService(WSDLModeler.java:679)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.internalBuildModel(WSDLModeler.java:404)
at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.buildModel(WSDLModeler.java:223)
at oracle.j2ee.ws.common.processor.config.ModelInfo.buildModel(ModelInfo.java:173)
at oracle.j2ee.ws.common.processor.Processor.runModeler(Processor.java:72)
at oracle.j2ee.ws.tools.wsa.AssemblerTool.run(AssemblerTool.java:95)
at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createModel(WsdlToJavaTool.java:398)
at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.getSeiInfo(WsdlToJavaTool.java:536)
at oracle.j2ee.ws.tools.wsa.Util.getSeiInfo(Util.java:230)
at oracle.jdeveloper.webservices.model.java.JavaWebService.createPortTypes(JavaWebService.java:1085)
at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2285)
at oracle.jdeveloper.webservices.model.WebService.createServiceFromWSDL(WebService.java:2156)
at oracle.jdeveloper.webservices.model.java.JavaWebService.<init>(JavaWebService.java:308)
at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.updateServiceModel(WebServiceProxy.java:1190)
at oracle.jdeveloper.webservices.model.proxy.WebServiceProxy.getServiceTargetNamespace(WebServiceProxy.java:1593)
at oracle.jdeveloper.webservices.model.OracleWebServicesUtils.createInitialClientOracleWebservices(OracleWebServicesUtils.java:1025)
at oracle.jdeveloper.webservices.model.security.SecurityIO.save(SecurityIO.java:564)
at oracle.jdeveloper.webservices.model.security.SecurityModel.writeConfiguration(SecurityModel.java:485)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.generateImpl(ProxyGenerator.java:330)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.mav$generateImpl(ProxyGenerator.java:77)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator$1ThrowingRunnable.run(ProxyGenerator.java:206)
at oracle.jdeveloper.webservices.model.GeneratorUI$GeneratorAction.run(GeneratorUI.java:446)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
at java.lang.Thread.run(Thread.java:595)
Thanks and regards.

It sounds to me like you are doing the right thing. Take a look at the tutorial on the Oracle Fusion Middleware for Apps Best Practice Center for consuming external web services to see if this helps: http://www.oracle.com/technology/tech/fmw4apps/jde/pdf/consuming-external-web-services-using-business-services.pdf.
Dave

How to send the SOAP Fault Message to the Web Service Consumer

Hi,
I have configured SAOP to Proxy Syncronous Scenario in PI 7.1 and using XML Validation in Adapter Engine to Validate the Structure of the Message Payload.The scenario is working fine.When some of the Filed's Length increses the maxLength specified in the Data Type . We are getting the Following error.
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SOAP:Body>
      <SOAP:Fault>
         <faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
               <context>XIAdapter</context>
               <code>ADAPTER.JAVA_EXCEPTION</code>
               <text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.
3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
     at com.sap.aii.adapter.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:1164)
My question is How does the Web Service Consumer can handle this Soap Server Error in the SOAP Fault.Or How can we provide a specific information like 'The value '123456789' of element 'CompanyCode' is not valid.It exceeds the Maximum Length'.
I read this /people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client blog .Where it is mentioned that the Web Service Consumer can handle while calling the Web Service.Is there any other solution?
Kindly appreciate your help.

Thank You Stefan for your kind reply.
So you mean to say if we use the XML Validation .we cannot provide proper error information to the calling Web Service Consumer .And While calling a Web Service they cannot Extract the Exact Message in the Text Filed(<text>) present under the Detail Element (<detail>) in the <SOAP:Fault> node. as
<text>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageFormatException: XML Validation for payload with root element name MT_Out_CustomerMaster_FPMReq , target namespace http://Pegasystems.com/I06_Customers Failed!Errors Encountered During Parsing
1.cvc-maxLength-valid: Value '123456789' with length = '9' is not facet-valid with respect to maxLength '8' for type 'null'.
2.cvc-type.3.1.3: The value '123456789' of element 'CompanyCode' is not valid.**
3.cvc-maxLength-valid: Value 'asdf' with length = '4' is not facet-valid with respect to maxLength '1' for type 'null'.
4.cvc-type.3.1.3: The value 'asdf' of element 'OperationType' is not valid.
That is why we have to use the Fault messages and Field Lengths has to be Validated in the Server proxy.
Please Correct me If I am wrong.

Web Service consumer using ABAP-PROXY

Hello,
I want to test Web Service consumer using ABAP-PROXY . So I do what is explain in the weblog :
[http://wiki.sdn.sap.com/wiki/display/Snippets/WebServiceconsumerusingABAP-PROXY]
But when I execute the programm, the message : 'No valid source context supplied'.
But, proxy and port are ok and activate.
Can you help me.
Thanks.

Hi Jitesh,
Thanks for the link. I checked but did not find helpful info there.
I have managed to make it work yesterday. Two issues were identified.
1. The namespace in the WSDL file imported into ESR as an external definition. I need to create the same namespace in ESR before importing the WSDL and then import the WSDL into that namespace.
2. The authentication method. The authentication method in the IIS configuration of the .NET web service has to be set to Basic Authentication. Then I set logical port of the consumer proxy in the OSAMANAGER to use Basic Authentication also. So far only the Basic Authentication works in my test scenario.
I am closing this question.
Regards,
Jiannan

Create an SAP Web Service Consumer (calling External Sharepoint Web Service from ABAP)

hi all,
i am trying to
Create an SAP Web Service Consumer (calling sharepoint Web Service from ABAP) using blog given on following link
Create an SAP Web Service Consumer (calling External Web Service from ABAP)
but when i am using my url at the end of step 3, i am getting error as follows:
i dont want to use local file option. Can anyone help me in this??
thanks in advance
regards,
SDS

Hi SDS,
you recieved a http 404 error when trying to access the Sharepoint Web service. Http 404 indicates that the resource is not reachable (cf. HTTP 404 - Wikipedia, the free encyclopedia). There could be different reasons for that. I'd suggest rubble checking the URL of the Web service first. Try to access it from a browser on you desktop. If the URL is correc. Most likely the SAP system is not able to connect to the URL. This could, for example, be due to some firewall restrictions. You should ask a SAP Basis colleague if they are able to access the URL of the Web service from the server on which the SAP system is running.
Christian

Error in HTTP framework - 401 unauthorised while creating a service consume

Hi,
I am trying to create a service consumer in SE80 by specifying a WSDL URL of a webservice ( I created this webservice from an inbound service interface ).....but at the last step it asks for user id and pwd......after specifying the user / pwd it says Error in HTTP framework - 401 unauthorised
what may be the problem....the user has all tha required authorisation as I can use the same user to test in wsnavigator.

In my experience this problem was always found to be around authorizations necessary for execution of specific activity. I would strongly advise you to speak with your Security/Authorization consultant to help you.

Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?

TimesTen Release 11.2.1.9.6 (64 bit Linux/x86_64)
Command> dssize;
PERM_ALLOCATED_SIZE:      51200000
PERM_IN_USE_SIZE: 45996153
PERM_IN_USE_HIGH_WATER:   50033464
TEMP_ALLOCATED_SIZE:      2457600
TEMP_IN_USE_SIZE:         19680
TEMP_IN_USE_HIGH_WATER:   26760
Is there any command/query/etc, which would allow to understand what database objects (for example tables) are consuming memory and how much of it?
tried to use ttsize function, but it gives some senseless results – for example, for the biggest table, tokens, it produces following output (that this table is 90GB in size – what physically cannot be true):
Command> call ttsize('tokens',null,null);
< 90885669274.0000 >
1 row found.

Are you able to use the command line version of ttSize instead? This splits out how much space is being used by indexes (in the Temp section of the TT memory segment), which I think is being combined into one, whole figure in the procedure version of ttSize you're using. For example:
ttSize -tbl ia my_ttdb
Rows = 4
Total in-line row bytes = 17524
Total = 17524
Command> create index i1 on ia(a);
ttSize -tbl ia my_ttdb;
Rows = 4
Total in-line row bytes = 17524
Indexes:
Range index JSPALMER.I1 adds 5618 bytes
Total index bytes = 5618
Total = 23142
Command> call ttsize ('ia',,);
< 23142.0000000000 >
1 row found.
In 11.2.2 we added the procedure ttComputeTabSizes which populates system tables with detailed table size data, and was designed to be an alternative to ttSize. Unfortunately it still doesn't calculate index usage though, and it isn't in 11.2.1.

How to use web service consumer as a source to connect to Salesforce?

I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has operations like create, retrieve, upsert, delete etc so if I want to read data from account then could someone guide me on how to use the web service consumer to view the fields after importing the wsdl. After importing the wsdl and selecting the operation say create, the columns (ports) displayed shows different groups but it doesn't list the object fields? what am I missing here? And what is the operation to read data from Salesforce is it "retrieve" from the entripse wsdl? As a newbie on this, I appreciate any inputs on this topic.

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

User Creation causes Password Service to Crash

Hi All,
I have 3 Intel XServes and 2 Mac Pros on different sites which all have the same issue. When I create a user in Workgroup Manager, the following error occurs and the Password Service crashes:
"Got unexpected error
Error of type Not a known DirStatus (-1) on line 1922
of /SourceCache/ServerManagerUserGeneral/
ServerManagerUserGeneral-193.4.1/
UserAdvancedPluginView.mm"
As well as the password service crashing, it causes all other users to stop authenticating until the server is rebooted.
If I create a user with the default shortname (i.e. untitled_1) then the service does not crash. I have reinstalled the OS, replicated my build on a PPC machine with no issues but continue to have this error on the Intel machines. I have even tried installing the server OS onto an Intel iMac just to test and it does the same thing, including OSX Server 10.4.7 and 10.4.8
Has anyone else come across this or have any suggestions on what may have caused it?
Cheers,
PJR

Finally had Apple on the phone again yesterday who admitted that this was a known issue - Only took 8 months from when I first raised it!!

10.6.8 password service consuming memory

Similar Messages

Maybe you are looking for