10.6.8 Printing problem with HP Photosmart premium C310 printer

I hvae a Photosmart Premium C310 printer which is connected wirelessly to my network. I also have a Mac Pro which is connected to the same network by ethernet cable. Up until I updated to OS10.6.8 everything worked fine. After that I found that when I restated the printer I could see it for a short time under the printer list but then it seems to "time out" and I can no longer print to it within a couple of minutes from my Mac Pro. When I restart the printer I can also see its embedded web page again for a few minutes but then it becomes not visble.
I also own a Macbook pro and two iphones and an ipod touch and all these wireless devices have no problem with seeing the printer and printing to it at any time. The Macbook Pro is also updated to 10.6.8 and works fine with this printer.
It would seem that the issue is not with wireless devices but with a wired device printing to this wireless printer even though it is on the same network and on the same subnet mask. All that has changed between working fine last week and not being recognised this week is an update to OS10.6.8
I have restarted the Mac Pro, reinstalled the latest HP software and reset the printers wireless setup but this makes no difference.
Is this a similar issue to what others have been reporting about a bug with printing under 10.6.8 or possibly something else. Any help here would be appreciated as I have no way of printing from my Mac Pro right now.

Pengtao, I have plugged my Macbook Pro into the network (with Airport off) and I can no longer reach the Photosmart printer. Remove the cable and go wireless and the Macbook Pro can reach the printer again. I have installed the photosmart printer software under Windows 7 using Parallels on my Mac Pro and have no problems finding the Photosmart printer from it.
To make matters worse I have bought a new Laserjet M1536 today and install it on my network. Again I get the same issues. I can print to it from any wireless device on the network but cannot reach it on any wired device on the network.Switch the printer off and on and I can see it and print to it for about a minute then it becomes "offline" to my Mac Pro
Given that it works fine under Windows 7 from a Mac Pro I have to conclude that the issue must be OSX 10.6.8 and nothing else as everything worked fine before the upgrade. I have turned all device off and on , checked all cable connections and also uninstalled and reinstalled all printer drivers on the Mac Pro and cannot get it working. Any advice you may have that may solve the problem beyond it being an OSX issue will be greatly welcomed.

Similar Messages

Printing problems with HP Photosmart Premium C310a series

I recently installed an HP Photosmart Premium C310a series printer. Now the printer takes about 45 minutes to print a document. HP support says this is an Apple problem.
Can anyone help?

What file was the problem?
It seems that in the Windows/System32/Spool/Drivers/x64/3, the newly re-installed updated HP drivers (with the 2011-2012 dates) are the only ones with a .BUD extension. Maybe my Win7 computer doesn't recognize them as drivers? The other driver files in the '3' Folder have .dll, .gpd, and .vdf extensions. Is there another spot they should be copied so the computer can find the drivers? I see that up the chain in the Spool Folder, next to Drivers there is an empty folder named Printers.
And what files (Filenames) are needed to run the 309g-m? I assume some older drivers were kept on file when I ran the updated driver Install program. The newer HP 2011-2012 files in the '3' Folder are hpoc30j3.BUD, mxdwdui.BUD, hpc309at.BUD, and everything else is older. I need to know what to copy-paste to a better folder location.
Whatever and wherever the Drivers are, my computer can not find them!

Printing problem with HP Photosmart Premium C309g-m

I'm running windows XP sp3 on all of my machines with this printer{HP Photosmart Premium C309g-m} wireless network.Recently everything starts to print one inch lower on the paper and cuts off the bottom of each document I try to print.I print mostly from microsoft word 2007,and I have checked all the settings in word.It is almost like the printer skips an invisible header then starts to print the document.Any ideas would be appreciated.

I don't think there is anything wrong with the DSL modem HW. There might be an issue with how print data is being routed though.
Please try the second experiment where you blank-out the default gateway and DNS entries from the printer's internal web configuration page. Open the printer's internal web page by browsing to its IP address. Select Networking and then Wireless (802.11). Under the IPv4 Configuration tab, select Manual IP:
For Manual IP Address, use the existing printer IP address.
For Manual Subnet Mask, use 255.255.255.0
For Manual Default Gateway, leave blank. This is important.
Select Manual DNS Server:
Leave both the Manual Preferred DNS Server and Manual Alternate DNS Server fields empty. This is important.
Press Apply.
Turn off the DSL modem, the printer and all computers connected to your network. Wait 60 seconds then turn on the DSL modem and then turn on the printer. Then turn on the computers. See if this corrects the printing speed.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

IMac printing problem with HP Photosmart 7150

I've just bought a 27 inch iMac and I'm having problems printing out of iPhoto 9. I select for eg, 4 X photos per page and it prints about 10% of the page before spitting it out. I've downloaded the latest driver for my HP Photosmart 7150 printer (Gutenprint v5.2.5) but still no good.
The print monitor window always says it is printing Page 1 7%. Weird.
Any ideas?? Thanks in advance.
Dan

I've got the same problem on my MacBook Pro with Snow Leopard and Gutenprint 5.2.5 when printing on the 7150 - it prints about 10% (and skewed at that) and spits out the page. This occurs when printing from any app.
I am only able to print in draft mode which is not suitable for anything I need to do.
I realize this printer is no longer officially supported, but any help would be appreciated!
Thanks,
Mike.

Two-sided printing problem with a Photosmart 6510

I have a new Photosmart 6510 and it is supposed to come with automatic two-sided printing.
I have tried printing two-sided and followed the advice of many previous thread but it has not worked.
I am using a Mac OS X version 10.5.8 and Microsoft Word 2008.
When I go to the drop-down menu in the Print window and go to 'two-sided printing' the option to print both sides is greyed out, and it says that the paper type and size settings do not support two-sided printing. What size paper should I select and where can I do this?
Any help would be great.
Thank-you
This question was solved.
View Solution.

Hi,
Please try the following settings:
1.From the application used to print, click the File menu, then select Print. The Print window appears.
NOTE: The Print window might be minimized. Click the blue triangle next to the printer name to see all available settings.
2. To select the binding type click the lowest selection box listed as Copies & Pages.
3. Select Layout from the drop-down menu.
4. Set the Two-Sided option as Long-Edge binding.
If I'm not wrong, the duplexer support only A4 and Letter sizes
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Please let me know if you were able to successfully perform two-sided printing.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Printing problem on HP Photosmart Premium C309g-m

Hi all,
I am currently using HP Photosmart Premium C309g-m to print my documents and it runs on five different ink catridges. I usually print text documents using the black ink catridge. I realised that the moment the ink runs low(when they display the ! sign in the yellow triangle), the print out quality is significantly reduced in the sense that my text documents are printed with certain areas being missed out such as having half a line of text not being printed etc when my ink isn't even out or nearing to being completely out.
Does anybody else experience this problem? Is this problem exclusive to this model or just this particular printer I am using? Is there any way I can go about solving this problem because essentially this means that I have to replace the ink catridges once they go low because I can't print a complete document at all! Thanks!

Print a Wireless Network Test.
I hope you are not using this for MAC filtering on your router. It is pretty much a useless security method.
Read more here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Problem with HP Photosmart Premium - HP Message Center

I purchased the HP Photosmart Premium (C410a) approximately 2 weeks ago, and am having issues with HP Message Center. Everything else on the printer is working perfectly.
During the first week, I would get messages from the HP Message Center if the ink was low or if the printer was out of paper. However, I have just realised that for the last week I am no longer receiving these messages.
When I opened up the HP Message Center, the log showed that there had been no messages created for the past week. When I deleted the message log, my printer disappeared from the left hand side in Message Center, and the icons at the top (i.e. Network Configuration and Maintain Printer) can no longer be selected as they are greyed out.
About the same time the HP Message Center stopped providing messages, I ran the HP Printer Software Update 2.6 (which was offered through Apple Software Update). I don’t know if this was the cause of the issue.
I have since uninstalled and reinstalled the software using both the CD and the version from the HP Website but have had no luck in fixing this. Perhaps the Software Update 2.6 made a change that is not being reversed by the uninstall, but I am just guessing.
As I mentioned everything else with the printer is working perfectly. Any advice on this would be greatly appreciated.

Start here.

Printing problem with 8.0. videos printing on paper

I have used acrobat 6.0 for years, and have made many forms for my customers. When I made these forms with 6.0 I put videos on the forms to explain how to use the forms then when they print them the videos are not printed. However now that I have purchased acrobat 8.0 these forms are printing the videos on the paper. I do not know why this was not available on 8.0 as it was on 6.0. Why was this not continued from 6.0 to 8.0. Is there a hot fix or something that can solve this problem for me? Has anyone else came across this problem? any help would be appreciated. Thank You.

Thanks for your response. I may not have emphasized in my initial outline that all my other programs print fine on the Epson 7890; only printing from Photoshop is problematic. Do you still think it is an Epson problem?

Printing problems with CS3 Design Premium

I have had no problems with my copy of CS3 Design Premium running first on my Mac OS 10.6 and now on OS 10.7 and the program still runs will except when I do a Command P, the program quits. I do not even get to the printer page. I sometimes get a message when reopening the program, "Cannot handle the request because a modal dialog or alert is active." Anyone else have this kind of problem?

Hi Ralph,
This issue has been discussed in the below mentioned links.
http://forums.adobe.com/message/4817860
http://forums.adobe.com/thread/505514
Hope it solves your request.
If you're continuing to have issues please post back
Thanks,
Eshant

Wireless printing problems with Canon iP4300, but USB printing ok

My MacBook Pro is setup for wireless printing with a printer(Canon Pixma iP4300) connected to my other PC Desktop. The only problem is that when I print anything all the text and images are miniaturized and squished about a quarter of a page large into the upper left corner of an 8.5x11 paper. I installed all the programs that came with the printer installation disk and when I connect my MacBook directly to the printer via USB everything prints out just fine.
I suspect the problem is with the selection of printer model when you go to "Printer Setup" in System Preferences. The existing list of Canon printer models given to me by the computer does not contain anything specific for my iP4300. I simply chose the option "BJC 4300 Gimp-Print v.5.0.0-beta 2". Does anyone know of a way where I could add to that list of printer models or is there another way to get my wireless printing to work normally? Thanks to anyone who can help.

I have the same printer and network printing is a pain. Canon decided not to include a network specific driver for this printer.
You can try getting the latest version of the gimp-print drivers. The latest version has better support for ip4300. If it's worth it to you, PrintFab drivers have been working for me but PrintFab isn't free.
The latest Gimp-print (Gutenprint) drivers are here: http://gimp-print.sourceforge.net/MacOSX.php3
Hope that helps.

Printing problem with HP Color Laserjet 3000 printer

I am using HP Color Laserjet 3000 printer, it is configured in SAP ECC6 with SPAD with device type "HPLJ4 : HP Laserjet 4 series PCL and access method = L: Print Locally Using LP
At HPUX level printer in configured with proper driver also.
When I print from SAP, I get following error
"Invalid option, Please refer to MAN page for valid options" as attached
Other then above line , nothing else comes
Please help,
Al Mamun

Hi,
Make a try using the device type HKSAPWIN and the access method is front end prinitng.
Also make sure that you are able to take the print out using the os(printer should be configured at os level first).
Regards,
Vamshi.

Printing problem with HP Photosmart 5510

This is not really a Mavericks problem but I was hoping that someone out ther who owns a HP Photosmart 5510 all in one printer may know the answer. All was working fine up untill I (foolishly) changed the printing mode to economy black & white and now I can not get it back to printing in colour. Anyone know how to do this please?
Sorry that this is not a specivic Apple problem but I am desperate!
Cheers.

Hello wil46,
Welcome to the HP Support Forums! I understand you have recently changed the black ink cartridge on your HP Photosmart C8180. I would first like to make sure that the cartridges are properly vented, take a look at the picture below:
Please take out the cartridge and inspect it, clean the contacts with a lint free cloth (coffee filter works best) and some distilled water, also clean inside the printer where the cartridge sits. Depending on how long the printer was sitting for or an empty cartridge this can sometimes cause the nozzles to dry out which could cause the black ink not to print.
Now let's go ahead and clean the printhead, from the front panel of your C8180 follow the steps listed below:
Setup Menu > Tools > Clean Printhead
You may need to do this a few times, if you see the black ink quality getting better please continue with the cleanings.
Let me know if this was helpful, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Print problems with my Photosmart D5360 in a network with Windows 7

My printer is installed on my desktop PC that runs on vista.
I have two notebooks too.
One is running on vista, the other runs on windows 7.
They are all connected in a wireless home network that seems to be perfectly ok.
With the notebook on vista I can perfectly print via the wireless network, but with the notebook that runs on windows 7 it is not possible to print. The Notebook gives no failure message and the printer just gives a blank paper with a "paper failure" message on the printer.
It seems to be a network problem or a mismatch between vista and windows 7.
Is there somebody who can help me with this issue?
Thanks,
Peter.

Hi IUHoosier,
(Is this your name?)
First of thank you very much for your reply.
May be I was not clear enough in miy explenation.
My photosmart D5360 is connected to my desktop PC with USB.
So it is not a networkprinter.
When I connect the notebook that runs on windows 7 directly to the printer with a USB connection than there is no problem, it prints perfectly. In this situation I use the printdriver for Windows 7 that I installed a few days ago on the notebook itselve.
So I have the latest drivers on all my computers.
However, when I want to print via the wireless home network and so via the desktop PC to which my printer is connected, I have to use the printdriver that is installed on my desktop PC (or not??) that runs with Vista. In this case it won't print.
My desktop PC doesn't allow to install a driver for Windows 7 because it runs on vista. And on my notebook thatruns on windows 7 I can't reach the printdriver instaaled on the desktop PC that I use to print wireless.
Maybe I am a bit clumsy with these things because my knowledge of networks is very basic I'm afraid.
The second link you gave me is in my opinion not useful for my situation? Or am I wrong?
Many thanks so far.
Best regard,
Peter.

Printing problem with hp photosmart 8180

The printer dont print in plack, although the cartridge is new.

Hello wil46,
Welcome to the HP Support Forums! I understand you have recently changed the black ink cartridge on your HP Photosmart C8180. I would first like to make sure that the cartridges are properly vented, take a look at the picture below:
Please take out the cartridge and inspect it, clean the contacts with a lint free cloth (coffee filter works best) and some distilled water, also clean inside the printer where the cartridge sits. Depending on how long the printer was sitting for or an empty cartridge this can sometimes cause the nozzles to dry out which could cause the black ink not to print.
Now let's go ahead and clean the printhead, from the front panel of your C8180 follow the steps listed below:
Setup Menu > Tools > Clean Printhead
You may need to do this a few times, if you see the black ink quality getting better please continue with the cleanings.
Let me know if this was helpful, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

10.6.8 Printing problem with HP Photosmart premium C310 printer

Similar Messages

Maybe you are looking for