10.6.8 Xserve cannot join domain

Hello World!
I've got an Xserve that has gone walkabout.  running 10.6.8 it "escaped" the domain it was joined to, and now will not rejoin the doamin.
Any thoughts on where to start looking?
-background.  I tried to login one day using my domain creds and it refused. could not Screen share, use the Parallels console (it refused the network credentials as well) nor could I SSH.
the Local Admin account works just fine.  Screen sharing, PMC, SSH, everything works fine.  OKAY.... So, It was joined to our AD, but no longer acting like it.
reboot, still no joy.  I did an "UNBIND" and it was no longer bound to the domain, but now will not rejoin the domain.  I keep getting the error that the user name or password is incorrect.
and yes I've checked that I'm typing everything correctly, I can get into the network drives from the Xserve using my Network creds, but it will not join AD.
I'm using the same settings that I have on my other 3 xserves.
thanks.

that was a good idea, but alas no. I was using the DC for the NTP so the clocks were in sync.
I also tried http://support.apple.com/kb/TS3346?viewlocale=en_US&locale=en_US
but have not restarted yet so I'll let you know.
but I did find that i was able to see the LDAP on my DC but not able to use AD to join...
really weird.

Similar Messages

  • Cannot join domain "the network path was not found"

    Hi there.
    As I wanted to install new Microsoft  Lync Server, I tried to prepare a virtual machine for this. For some reason I used a virtual machine that I tested for some another services, therefore it had some changes on it.
    As you know before installing Lync Server your client must be join a domain and when I tried to joined it I faced with this error "The following error occurred attempting
    to join the domain “ysatech”; the network path was not found "
    Before my search, I thought it was DNS problem. I checked DNS but nothing was wrong.
    I searched for it and I read some forums answers and I resolved it:
    As I said my client server had some changes, the problem was in the NIC but not about DNS or WINS. The "Client for Microsoft Networks" of
    NIC of my domain network was not checked and it must be checked.

    Check the dns setting on client and ensure the setting as below.
    1. Each workstation/member server should point to local DNS server as primary DNS and other remote DNS servers as secondary.
    2. Do not set public DNS server in TCP/IP setting of client/member server.
    3. If multiple NIC are configured disable the unrequired NIC.Check the NIC binding order too.
    This issue may occur if the TCP/IP NetBIOS Helper Service is not running on the client computer.
    http://www.chicagotech.net/pathnotfound.htm
    Network Path Not Found" Error Message When You Try to Add Workstation to Domain:http://support.microsoft.com/kb/285182
    I will also recommend to enable the Client for Microsoft Networks.If still issue persist post the ipconfig /all details of client computer.
    Best Regards,
    Sandesh Dubey.
    MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
    My Blog
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • FS NAS CLUSTER cannot join domain

    FS 7x series
    trying to join a nas cluster  to the domain and im getting "cluster already exist in the domain , leave the domain and join again"
    i see no traces for it in AD , and in group manager it doesnt say leave domain it only says configure AD 

    Hello Dan,
    It's difficult to triage such issues w/o the logs.  I would suggest opening a support case with Dell for this issue.
    Regards,
    Don

  • New 2012 R2 domain - xp clients cannot join or print

    I just migrated a 2003  domain to 2012 R2.   Things were working ok & then XP clients became AD stupid.
    Steps I took:
    Added a VM 2012 R2 DC to the domain.  Server had DNS installed.  Ran dcdiag & bpa and resolved any issues. 
    About a week later I moved all roles over to the VM DC.
    Tore down one of the NT2003 DCs (not VM) and rebuit it as a 2012 R2 DC w/DNS.  Ran dcdiag & bpa and resolved any issues.   Had problems with DNS scavenging removing some static records.  readded records & made sure the  "Delete
    record when it becomes stale" was unchecked on all static records (all fwd & rev zones).
    Moved all roles from the VM DC to the hardware DC.
    After a week I tore down the 2nd (& last) nt2003 DC (not VM) and rebuilt it as a 2012 R2 DC w/DNS.  Ran dcdiag/bpa and fixed any issues.  Also ran it on the other DCs.
    Removed the VM 2012 R2 DC from the domain (demote, remove features, remove from domain, power off, delete VM).
    Everything seems to be working fine.  dcdiags look clean, event logs seem good.
    Bump forest/domain to 2012 R2 native.
    Then, a few days later,  it goes bad.  I (after hours) install all accumulated updates on both DCs.  Reboot both.
    Next AM a user calls.  Her thin client cannot connect to the terminal services server.  DNS has deleted its dns record, even though the delete when stale was unchecked.  :|  So I readd the static record and turn off scavenging. 
    Problem solved.
    Next call s from a XP user (we have XP, Win 7, and thin clients).  She cannot print.  Printers show "cannot connect".  Try various things to no avail.  Check Win 7 boxes and they're working fine & printers are connected. 
    Note that the XP & Win7 boxes all pull their DHCP address from the same dhcp server/scope.
    Review error logs and run dcdiag.  There are several somewhat esoteric errors.  After several hours or tail chasing I decide to take a more scorched earth tack.  I demote the 2nd DC and remove AD & DNS from it. After demotion and role
    removal I check AD and it still shows the DC.  I remove the now just a server from the domain.  Clean up DNS & AD removing all traces.  This takes a while as I have to run variuos scripts (tahnk you google) to ensure AD is clean.
    Run dcdiag and resolve issues.  Even a detailed dcdiag comes out clean.  Replication tests show the old server is now forgotten.
    Check XP boxes and they still show printers as "cannot connect".
    Remove a XP PC from the domain.  Try to rejoin and I get a error.  Rename it and still get the error.  I can ping, nslookup, etc and they return the correct IP.
    I've tried the simple change the join a domain in system properties.  That gives a somewht non descript error.  The network identification wizard seemed to find the domain but didn't work.  As it was trying to find the PC in AD, I went ahead
    and added it via AD users& Computer console.  Run the wizard and it tells me it found the record in AD.  It then says "a domain controller for the domain [ourdomain] could not be contacted."  !?  Yet the prior screen it told
    me it had found the record for the PC on the DC.
    nslookup for ourdomain.local as well as dcname.ourdomain.local resolve correctly.  Tried chenging the PC to static - no change.  Rename the old win 2012 R2 dc (now just a server outside the domain), reboot, and the try to rejoin the domain. 
    Works flawlessly.
    BTW - We're running tcpip w/o netbios over tcpip.
    So basically my XP boxes cannot use AD printers and cannot join the domain.  IDK if they're picking up gp updates (I'll check in the AM), but I suspect they're not.
    Short of buying a truckload of Win 7 licenses and reloading OSs, what can I do to fix this?
    Details on the XP box error (fyi - I did a record to record comparison to a Win 2008 domain's SRV records and they look identical (except, fo course, the domain& server names)) :
    The domain name [ourdomain] might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    The following error occurred when DNS was queried for the service location (SRV) resource record used to locate a domain controller for domain [ourdomain]:
    The error was: "DNS name does not exist."
    (error code 0x0000232B RCODE_NAME_ERROR)
    The query was for the SRV record for _ldap._tcp.dc._msdcs.[ourdomain]
    Common causes of this error include the following:
    - The DNS SRV record is not registered in DNS.
    - One or more of the following zones do not include delegation to its child zone:
    [ourdomain]
    . (the root zone)
    For information about correcting this problem, click Help.
    dcdiag /test:dns results
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       Home Server = Domctl1
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site-Name\DOMCTL1
          Starting test: Connectivity
             ......................... DOMCTL1 passed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site-Name\DOMCTL1
          Starting test: DNS
             DNS Tests are running and not hung. Please wait a few minutes...
             ......................... DOMCTL1 passed test DNS
       Running partition tests on : DomainDnsZones
       Running partition tests on : ForestDnsZones
       Running partition tests on : Schema
       Running partition tests on : Configuration
       Running partition tests on : [ourdomain]
       Running enterprise tests on : [ourdomain].local
          Starting test: DNS
             Test results for domain controllers:
                DC: Domctl1.[ourdomain].local
                Domain: [ourdomain].local
                   TEST: Dynamic update (Dyn)
                      Warning: Failed to delete the test record dcdiag-test-record in zone [ourdomain].local
                   Domctl1                      PASS PASS PASS PASS WARN PASS n/a
             ......................... [ourdomain].local passed test DNS

    I see the following errors:
    "TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing
    connections are opened and closed at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period
    to elapse between successive connections from a given local endpoint to a given remote endpoint."
    Please read that: http://social.technet.microsoft.com/Forums/windowsserver/en-US/d770e9fd-53a2-4ae9-99b3-2754c4564592/tcpip-connection-issue-on-windows-server-2008-sp2?forum=winserverPN
    "DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols; requested by PID      b70 (C:\Windows\system32\dcdiag.exe)."
    As you can see, it is pointing to 8.8.8.8. You need to make sure that public DNS servers are configured as forwarders and not in IP setting of your DCs. Better if you could use your ISP DNS servers as public ones instead of 8.8.8.8.
    Please read this Wiki article for recommendations about IP settings: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
    "               TEST: Dynamic update (Dyn)
                      Test record dcdiag-test-record added successfully in zone [ourdomain].local
                      Warning: Failed to delete the test record dcdiag-test-record in zone [ourdomain].local
                      [Error details: 9505 (Type: Win32 - Description: Unsecured DNS packet.)]
    Here, you need to make sure that only secure DNS updates are allowed if you would like to secure dynamic updates. This is detailed in here:http://social.technet.microsoft.com/wiki/contents/articles/21984.how-to-secure-dns-updates-on-microsoft-dns-servers.aspx
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • MDT 2010 Vista cannot finish after joining domain

    Hi,
    I have a problem with deployment process after joining domain. I am deploying Vista using MDT 2010 with LiteTouch.  Everything works fine. However, deployment process stops after joining domain. I suppose that autologon is disabled/don't work after joining domain and all following steps can't be started.
    What is wrong with my configuration or Task Sequence?
    Thanks in advance, Jan.

    Hi Jan,
    Thank you for your post.
    As you said that the deployment process stopped after joining domain, may I know if there is any error received? If so, please let me know the details.
    Meanwhile, I would like to share the following with you:
    Avoiding Legan Notice that breaks MDT autologon
    http://blogs.msdn.com/alex_semi/archive/2009/08/28/avoiding-legan-notice-that-breaks-mdt-autologon.aspx
    Thanks.
    Nicholas Li
    TechNet Subscriber Support in forum
    Nicholas Li - MSFT

  • Macbook ver 10.6.8 after update 10.6.8 combo cannot join open wifi anymore

    I am using Macbook ver 10.6.8 after update 10.6.8 combo i cannot join open wifi anymore.it shows me no internet connection.in fact before this i can acces any open wifi smoothly.it makes me annoyed and regret my action updating the combo.almost 3weeks i try to find the solution by read any suggestion from community but it makes me frustrated. for sure i refuse to send away my macbook to technician because what i knew they also take solution from here.i state here my macbook details :
    Model Name:          MacBook
      Model Identifier:          MacBook3,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          4 MB
      Memory:          4 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MB31.008E.B02
      SMC Version (system):          1.24f3
      Serial Number (system):          W8744400Z63
      Hardware UUID:          6172E4C5-C120-5C8A-9B2E-430B3D42C912
      Sudden Motion Sensor:
      State:          Enabled
    this the details my current network:
    AirPort:
      Type:          AirPort
      Hardware:          AirPort
      BSD Device Name:          en1
      IPv4 Addresses:          169.254.70.222
      IPv4:
      Addresses:          169.254.70.222
      Configuration Method:          DHCP
      Interface Name:          en1
      Subnet Masks:          255.255.0.0
      IPv6:
      Configuration Method:          Automatic
      Ethernet:
      MAC Address:          00:1d:4f:fc:c2:34
      Media Options:
      Media Subtype:          Auto Select
      Proxies:
      Exceptions List:          *.local, 169.254/16
      FTP Passive Mode:          Yes
      Service Order:          2
    this is the open wifi i always acces smoothly before i update the combo:
      Software Versions:
      Menu Extra:          6.2.2 (622.2)
      configd plug-in:          6.2.5 (625.6)
      System Profiler:          6.0.1 (601.1)
      Network Preference:          6.2.2 (622.2)
      AirPort Utility:          5.6.1 (561.3)
      IO80211 Family:          3.2 (320.1)
      Interfaces:
    en1:
      Card Type:          AirPort Extreme  (0x14E4, 0x88)
      Firmware Version:          Broadcom BCM43xx 1.0 (5.10.131.42.4)
      Locale:          APAC
      Country Code:          MY
      Supported PHY Modes:          802.11 a/b/g/n
      Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
      Wake On Wireless:          Supported
      Status:          Connected
      Current Network Information:
    TM WiFi:
      PHY Mode:          802.11g
      BSSID:          0:19:be:80:20:1a
      Channel:          1
      Country Code:          MY
      Network Type:          Infrastructure
      Security:          None
      Signal / Noise:          -77 dBm / -94 dBm
      Transmit Rate:          36
      Other Local Wireless Networks:
    TM WiFi:
      PHY Mode:          802.11g
      BSSID:          0:19:be:80:21:96
      Channel:          6
      Network Type:          Infrastructure
      Security:          None
      Signal / Noise:          -78 dBm / -99 dBm
    Location (8/1/12 8:22 AM):<<<<<<<<<-------------------------At this time i can acces this open wifi with auto-login
      Active Location:          No
      Services:
    Ethernet:
      Type:          Ethernet
      BSD Device Name:          en0
      Hardware (MAC) Address:          00:1b:63:a6:2e:44
      IPv4:
      Configuration Method:          DHCP
      IPv6:
      Configuration Method:          Automatic
      Proxies:
      Exceptions List:          *.local, 169.254/16
      FTP Passive Mode:          Yes
    FireWire:
      Type:          FireWire
      BSD Device Name:          fw0
      Hardware (MAC) Address:          00:1d:4f:ff:fe:72:00:d4
      IPv4:
      Configuration Method:          DHCP
      IPv6:
      Configuration Method:          Automatic
      Proxies:
      Exceptions List:          *.local, 169.254/16
      FTP Passive Mode:          Yes
    AirPort:
      Type:          IEEE80211
      BSD Device Name:          en1
      Hardware (MAC) Address:          00:1d:4f:fc:c2:34
      IPv4:
      Configuration Method:          DHCP
      IPv6:
      Configuration Method:          Automatic
      DNS:
      Search Domains:          , 94C723E0-B495-45CF-8ACE-279AF0F2D687
      Server Addresses:
      Proxies:
      Exceptions List:          *.local, 169.254/16
      FTP Passive Mode:          Yes
      IEEE80211:
      Join Mode:          Automatic
      JoinModeFallback:          Prompt
      PreferredNetworks:
      SecurityType:          Open
      SSID_STR:          TM WiFi
      Unique Network ID:          94C723E0-B495-45CF-8ACE-279AF0F2D687
    after i update the combo:
    and the page which the open wifi load automatically did not appear as before.
    if the update affect the wifi,cant i just downgrade and remove the annoyed combo?any expertise r welcome to give great solution..plzz!!!need your help!!!!

    cant believe it nobody reply.. very dissapointed ..i bring my mac to experrt and he reset my mac to the original version 10.6.8 .. n seriously after it done.. the connection as i mentioned which annoyed me settled and it works like a charm.. when i try to check update my software ...it showned combined software for 10.6.8.. however i still afraid to update it.. i'm still in trauma...

  • Px12-350r unable to re-join domain - what to do now?

    Hello everyone!
    I hope you can give me some advice because at the moment I am in a really stupid situation, being probably locked out of my Iomega px12-350r.
    Here's what happened:
     * The device has been successfully joined to my Microsoft AD domain and has been running with this config for at least a year.
    * I expanded the storage array 2 days ago, adding 2 disks. Everything went fine and when the expansion completed, the new total disk space was displayed correctly in the admin web interface.
    * After that, I rebooted the device. After the reboot, I could not log in to the device any more using my domain account. This account has had admin rights on the NAS and I have logged into the NAS using this account before. 
    * I did not change anything in the domain infrastructure.
    * I know that the device cannot join the domain anymore because I activated email notifications and it keeps sending me "Unable to join domain".
    I already tried:
    * Login using the usual local accounts: Does not seem to work once the device is joined to a domain.
    * Login via SSH. Does not work, probably for the same reason as above.
    I did NOT try yet:
    * The user manual mentions resetting the admin password by pushing the reset button on the back. But will this only reset config (I would be ok with that) or will it erase the data on the drives as well?
    I am from Germany. Despite having purchased a 24x7 service plan, German support hotline will only redirect me to the American hotline who claim to do only desktop NAS, no px12's. I am kind of in the middle of nowhere now. ;-)
    Thanks for your help!
    Best Regards,
    Florian
    Solved!
    Go to Solution.

    Hi qaware,
    Just to clarify, are you talking about logging into the device's web interface or logging into your active directory client?
    I would first recommend rebooting everything and restarting your client in case there are more than one sessions open.
    What credentials are you using to log into SSH? User should be "root" and password is "soho + admin password". Make sure you are not using any special characters.
    You could do a reset from the back of the device. This is not data destructive, but it will reset user and network settings so you will have to set the device up again, rejoin the domain and import the AD users and groups.
    Are there any other admin users you could try logging in under?
    Have questions and need answers?
    Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
    LenovoEMC Support & Downloads
    LenovoEMC North America Support Contact Page

  • Cannot join time capsule airport network from iPad 2 or iPhone 4

    I have recently setup a new time capsule airport base station network with my new iMac (27-inch, late 2012) running OSX 10.8.2. Wi-Fe network works fine for internet access and printing from the iMac but I cannot join the wi-fi network from our iPad 2 or iphones. The network is seen in the wi-fi setup when wi-fi is turned on with the ipad and phone but does not establish a connection. An IP address and subnet mask show under the DHCP settings but the connection is not established. (Continuous revolving wheel).
    Any help would be appreciated.

    The airport utility in Mountain Lion is a toyland version.. see bottom of post for installing v5.6 which improves the ability to actually make the TC do what you want.
    For whatever reason the iphone/ipad seem sensitive to wireless channels.. which Apple auto rotate.. I think it is bluetooth connection stuff.
    Anyhow jump in and set the following.
    Wireless should have strictly SMB names.. short no spaces, pure alphanumeric.
    Use WPA2 Personal security.
    Lock the wireless channel for 2.4ghz.. try in the following order.. 11, 6, 1 (those are the only non-overlapping channels) you can try in turn for which is best but if 11 works well stick to it.. Outside USA you can also use 13.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • My iPhone 4S has stopped receiving iMessages, cannot send/load any pictures over whatsapp, cannot join the wifi in my house anymore. What has happened to my iPhone i haven't made any changes?

    My iPhone 4S has stopped receiving/sending iMessages, cannot send/load any pictures over whatsapp and cannot join the wifi in my house anymore.
    Essentially all the things I use my phone for have now stopped working. I constantly have 3G connected (even though i dont want to use it, i want to connect to the wifi in my house) but still when I try to download/ send a picture over whatsapp it comes up with an error message saying the server is unverified, or something equally ridiculous.
    I deleted the app so i could reinstall it (as if that would help), but the app store is started saying "unable to connect", despite 3G, so that bright idea died out pretty sharpish.
    Whenever i try to turn on iMessage, it asks for my Apple ID password, which I know I've typed in correctly because I reset the **** thing about 4 times due to it apparently being "incorrect". Even so, it repeatedly asks for the password over and over as soon as I've entered it, saying it was "unable to connect" before a final "incorrect password" message pops up just to add an extra smack of annoyance.
    I haven't changed a single setting on my iPhone whatsoever. It just suddenly started spiralling into what is now £28/month-worth of pure frustration.
    I don't even have any music or photos on it as I had to free up 3.5GB of space on the **** thing to allow it to update, naively thinking that would solve the problem, but alas it did not.
    I have seen a few questions posted like this one, usually just one of the problems I have, but I seem to have rounded up the whole bunch (lucky me). None of the previously posted questions have received any replies.
    Can some please help me! Honestly, if i see another "unable to..." or "unverified source" pop up again I'll probably smash the thing against the side of my house.
    Cheers.

    On your iPad, go to [Settings > General > Reset > Reset Network Settings] Once that is done, re-connect your iPad to your wifi network.

  • OVM Server takes long time to boot up - gets stuck for minutes after joining domain

    Server takes a long time to reboot. Seems to get stuck for 8-10 minutes every time after joining domain.
    See below extract from /var/log/messages:-
    Feb 1 16:39:49 svrshir441 kernel: OCFS2 1.8.0
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000E5144BF336A244A4 ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,4) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB00000500000328DE591E03F0DB ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,2) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB000005000024F2772BB88DAA6A ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,5) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B8721C8850D2C515 ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,1) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000EE77A2D3C8C7383B ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,0) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain 0004FB0000050000B96BA1B4B79D765E ( 0 1 2 ) 3 nodes
    Feb 1 16:39:49 svrshir441 kernel: ocfs2: Mounting device (252,3) on (node 1, slot 2) with ordered data mode.
    Feb 1 16:39:49 svrshir441 kernel: o2dlm: Joining domain ovm ( 0 1 2 ) 3 nodes
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_BRM_status_show: BRM attribute is only forwarpdrive
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_show: host_trace_buffer is not registered
    Feb 1 16:47:22 svrshir441 kernel: mpt2sas0: _ctl_host_trace_buffer_size_show: host_trace_buffer is not registered
    Feb 1 16:47:22 svrshir441 kernel: qla2xxx [0000:30:00.0]-1020:7: **** Failed mbx[0]=4006
    No idea why it seems to pause for 8 minutes.

    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
    odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
    , 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
    ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
    ecking O2CB cluster "8cd10008859eaf59": Online\n  Heartbeat dead threshold: 61\n  Network idle timeout: 60000\n  Network keepalive d
    elay: 2000\n  Network reconnect delay: 2000\n  Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n  0004FB0000050000E5144BF336
    A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:162) cluster debug: {'/sys/kernel/debug/o2dlm': [], '/sys/kernel/debug/o2net': ['connected_n
    odes', 'stats', 'sock_containers', 'send_tracking'], '/sys/kernel/debug/o2hb': ['0004FB0000050000E5144BF336A244A4', 'failed_regions'
    , 'quorum_regions', 'live_regions', 'livenodes'], 'service o2cb status': 'Driver for "configfs": Loaded\nFilesystem "configfs": Moun
    ted\nStack glue driver: Loaded\nStack plugin "o2cb": Loaded\nDriver for "ocfs2_dlmfs": Loaded\nFilesystem "ocfs2_dlmfs": Mounted\nCh
    ecking O2CB cluster "8cd10008859eaf59": Online\n  Heartbeat dead threshold: 61\n  Network idle timeout: 60000\n  Network keepalive d
    elay: 2000\n  Network reconnect delay: 2000\n  Heartbeat mode: Global\nChecking O2CB heartbeat: Active\n  0004FB0000050000E5144BF336
    A244A4 /dev/dm-4\nNodes in O2CB cluster: 0 1 2 \n'}
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:270) Trying to mount /dev/mapper/360080e500036115200000b315294458d to /poolfsmnt/0004fb00000
    50000e5144bf336a244a4
    [2015-02-01 16:38:23 9555] DEBUG (ocfs2:295) /dev/mapper/360080e500036115200000b315294458d mounted to /poolfsmnt/0004fb0000050000e51
    44bf336a244a4
    [2015-02-01 16:38:24 10441] INFO (notificationserver:213) NOTIFICATION SERVER STARTED
    [2015-02-01 16:38:24 10443] INFO (remaster:140) REMASTER SERVER STARTED
    [2015-02-01 16:38:24 10444] INFO (monitor:23) MONITOR SERVER STARTED
    [2015-02-01 16:38:24 10447] INFO (ha:89) HA SERVER STARTED
    [2015-02-01 16:38:24 10448] INFO (stats:26) STAT SERVER STARTED
    [2015-02-01 16:38:24 10451] INFO (xmlrpc:307) Oracle VM Agent XMLRPC Server started.
    [2015-02-01 16:38:24 10451] INFO (xmlrpc:316) Oracle VM Server version: {'release': '3.2.8', 'date': '201404161506', 'build': '736'}
    , hostname: svrshir441, ip: 10.90.17.41
    [2015-02-01 16:38:24 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:38:24 10441] DEBUG (notificationserver:239) Connected to manager.
    [2015-02-01 16:38:25 10441] INFO (notificationserver:267) Service started.
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdb-7:0:0:0 (unde
    f:0x20470080e5361152:360080e500036115200000b315294458d)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdh-9:0:0:0 (acti
    ve:0x20460080e5361152:360080e500036115200000b315294458d)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdd-7:0:0:2 (unde
    f:0x20470080e5361152:360080e500036115200000b36529447cb)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdj-9:0:0:2 (acti
    ve:0x20460080e5361152:360080e500036115200000b36529447cb)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdf-7:0:0:4 (unde
    f:0x20470080e5361152:360080e500036115200000b39529448ba)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdl-9:0:0:4 (acti
    ve:0x20460080e5361152:360080e500036115200000b39529448ba)
    [2015-02-01 16:38:25 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdc-7:0:0:1 (acti
    ve:0x20470080e5361152:360080e500037683a00000b1652944694)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdi-9:0:0:1 (unde
    f:0x20460080e5361152:360080e500037683a00000b1652944694)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sde-7:0:0:3 (acti
    ve:0x20470080e5361152:360080e500037683a00000b18529448bf)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdk-9:0:0:3 (unde
    f:0x20460080e5361152:360080e500037683a00000b18529448bf)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdg-7:0:0:5 (acti
    ve:0x20470080e5361152:360080e500037683a00000b1a529449ac)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_SD] sdm-9:0:0:5 (unde
    f:0x20460080e5361152:360080e500037683a00000b1a529449ac)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-5 (360080e5000
    36115200000b39529448ba)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-1 (360080e5000
    36115200000b36529447cb)
    [2015-02-01 16:38:26 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-0 (360080e5000
    37683a00000b1652944694)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-2 (360080e5000
    37683a00000b18529448bf)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-3 (360080e5000
    37683a00000b1a529449ac)
    [2015-02-01 16:38:27 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:25 {STORAGE} [ADD_DM] dm-4 (360080e5000
    36115200000b315294458d)
    [2015-02-01 16:38:29 10444] DEBUG (monitor:36) Cluster state changed from [Unknown] to [DLM_Ready]
    [2015-02-01 16:38:29 10444] INFO (notification:47) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Unknown] to [D
    LM_Ready]
    [2015-02-01 16:38:29 10441] INFO (notificationserver:139) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Unkn
    own] to [DLM_Ready]
    [2015-02-01 16:38:33 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:33 {NETWORK} net : ADD : eth4 (1)
    [2015-02-01 16:38:36 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:36 {NETWORK} net : ADD : eth5 (1)
    [2015-02-01 16:38:39 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:39 {NETWORK} net : ADD : eth6 (0)
    [2015-02-01 16:38:42 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:42 {NETWORK} net : ADD : eth7 (1)
    [2015-02-01 16:38:45 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:45 {NETWORK} net : ADD : eth0 (1)
    [2015-02-01 16:38:48 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:48 {NETWORK} net : ADD : eth1 (1)
    [2015-02-01 16:38:51 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:51 {NETWORK} net : ADD : eth2 (0)
    [2015-02-01 16:38:54 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:54 {NETWORK} net : ADD : eth3 (1)
    [2015-02-01 16:38:57 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:38:57 {NETWORK} net : ADD : bond0 (1)
    [2015-02-01 16:39:00 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:00 {NETWORK} net : ADD : bond1 (1)
    [2015-02-01 16:39:03 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:03 {NETWORK} net : ADD : bond1.590 (1)
    [2015-02-01 16:39:06 10441] INFO (notificationserver:139) Sending notification: Feb  1 16:39:06 {NETWORK} net : ADD : bond1.90 (1)
    [2015-02-01 16:40:56 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) None&c=8&s=
    1422808694292&lb=p&t=2&p=%3Ccom.oracle.odof.OdofIdentifier%3E%3Clong%3E943%3C%2Flong%3E%3C%2Fcom.oracle.odof.OdofIdentifier%3E%2Ccom
    pareTo%2Cjava.lang.Object%2CNone%2C5'
    [2015-02-01 16:41:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:41:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:41:47 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:05 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:26 10441] ERROR (notificationserver:124) Error sending stats notification: 'Invalid URL Request (send) https://10.
    90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1767abc
    [2015-02-01 16:42:26 10441] INFO (notificationserver:276) Service stopped.
    [2015-02-01 16:42:26 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:42:29 10441] ERROR (notificationserver:244) Error initializing notification server: 'Invalid URL Request (send) https
    ://10.90.17.43:7002/ovm/core/OVMManagerCoreServlet&c=1&s=-1&lb=p&t=2&p=e02400aa0010ffffffffffffff200008%2Cc58171c45d024e7c9de519aaf1
    767abc'
    [2015-02-01 16:42:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:42:59 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:43:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:43:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:43:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:43:45 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:44:05 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:25 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:32 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:44:46 10448] ERROR (notification:44) Unable to send notification: (111, 'Connection refused')
    [2015-02-01 16:44:53 11242] DEBUG (service:76) call start: discover_server
    [2015-02-01 16:44:54 11242] DEBUG (service:76) call complete: discover_server
    [2015-02-01 16:45:02 10441] DEBUG (notificationserver:237) Trying to connect to manager.
    [2015-02-01 16:45:02 10441] DEBUG (notificationserver:239) Connected to manager.
    [2015-02-01 16:45:03 10441] INFO (notificationserver:267) Service started.
    [2015-02-01 16:47:22 11455] DEBUG (service:76) call start: get_api_version
    [2015-02-01 16:47:22 11455] DEBUG (service:76) call complete: get_api_version
    [2015-02-01 16:47:22 11456] DEBUG (service:76) call start: discover_server
    [2015-02-01 16:47:22 11456] DEBUG (service:76) call complete: discover_server
    [2015-02-01 16:47:22 11470] DEBUG (service:76) call start: discover_hardware
    [2015-02-01 16:47:23 11470] DEBUG (service:76) call complete: discover_hardware
    [2015-02-01 16:47:23 11497] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:47:23 11497] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:47:24 11498] DEBUG (service:76) call start: discover_storage_plugins
    [2015-02-01 16:47:24 11498] DEBUG (service:76) call complete: discover_storage_plugins
    [2015-02-01 16:47:24 11501] DEBUG (service:74) call start: discover_physical_luns('',)
    [2015-02-01 16:47:25 11501] DEBUG (service:76) call complete: discover_physical_luns
    [2015-02-01 16:47:25 11523] DEBUG (service:74) call start: discover_physical_luns('360080e500036115200000b315294458d 360080e50003611
    5200000b36529447cb 360080e500037683a00000b1652944694 360080e500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e5000
    36115200000b315294458d 360080e500037683a00000b1a529449ac 360080e500036115200000b36529447cb 360080e500037683a00000b1652944694 360080e
    500036115200000b39529448ba 360080e500037683a00000b18529448bf 360080e500037683a00000b1a529449ac',)
    [2015-02-01 16:47:25 11523] DEBUG (service:76) call complete: discover_physical_luns
    [2015-02-01 16:47:26 11545] DEBUG (service:76) call start: discover_repository_db
    [2015-02-01 16:47:26 11545] DEBUG (service:76) call complete: discover_repository_db
    [2015-02-01 16:47:26 11546] DEBUG (service:74) call start: storage_plugin_listMountPoints('oracle.ocfs2.OCFS2.OCFS2Plugin', {'status
    ': '', 'admin_user': '', 'admin_host': '', 'uuid': '0004fb000009000090ee9ab5a5966c67', 'total_sz': 0, 'admin_passwd': '******', 'fre
    e_sz': 0, 'name': '0004fb000009000090ee9ab5a5966c67', 'access_host': '', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': []
    , 'used_sz': 0, 'storage_desc': ''})
    [2015-02-01 16:47:26 11546] INFO (storageplugin:109) storage_plugin_listMountPoints(oracle.ocfs2.OCFS2.OCFS2Plugin)
    [2015-02-01 16:47:27 11546] DEBUG (service:76) call complete: storage_plugin_listMountPoints
    [2015-02-01 16:47:27 11573] DEBUG (service:76) call start: get_yum_config
    [2015-02-01 16:47:27 11573] DEBUG (service:76) call complete: get_yum_config
    [2015-02-01 16:47:27 11574] DEBUG (service:76) call start: discover_cluster
    [2015-02-01 16:47:27 11574] DEBUG (service:76) call complete: discover_cluster
    [2015-02-01 16:48:53 11703] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:48:53 11703] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:48:53 11704] DEBUG (service:74) async call start: start_vm('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff93
    af0676e8c83')
    [2015-02-01 16:48:53 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {START
    [2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-eff9-3af0676e8c83 {VNC}
    5900
    [2015-02-01 16:48:54 11706] DEBUG (base:269) async call complete: func: start_vm pid: 11706 status: 0 output:
    [2015-02-01 16:48:54 11706] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 11706
    [2015-02-01 16:48:54 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 11706
    [2015-02-01 16:48:55 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLVNC} 6
    900
    [2015-02-01 16:48:55 11958] DEBUG (service:74) call start: configure_vm_ha('0004fb00000300001e5b01d4a4cb6426', '0004fb0000060000eff9
    3af0676e8c83', True)
    [2015-02-01 16:48:56 11958] DEBUG (service:76) call complete: configure_vm_ha
    [2015-02-01 16:48:56 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000eff93af0676e8c83 {SSLTTY} 7
    900
    [2015-02-01 16:50:01 12075] DEBUG (service:76) call start: discover_network
    [2015-02-01 16:50:01 12075] DEBUG (service:76) call complete: discover_network
    [2015-02-01 16:50:01 12076] DEBUG (service:74) async call start: start_vm('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d7
    ad27e9d7b63')
    [2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {START
    [2015-02-01 16:50:02 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VNC}
    5901
    [2015-02-01 16:50:02 12078] DEBUG (base:269) async call complete: func: start_vm pid: 12078 status: 0 output:
    [2015-02-01 16:50:02 12078] INFO (notification:47) Notification sent: {ASYNC_PROC} exit PID 12078
    [2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {ASYNC_PROC} exit PID 12078
    [2015-02-01 16:50:03 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLVNC} 6
    901
    [2015-02-01 16:50:04 12516] DEBUG (service:74) call start: configure_vm_ha('0004fb0000030000ba5b6d02faa88c44', '0004fb0000060000fd7d
    7ad27e9d7b63', True)
    [2015-02-01 16:50:04 12516] DEBUG (service:76) call complete: configure_vm_ha
    [2015-02-01 16:50:04 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb0000060000fd7d7ad27e9d7b63 {SSLTTY} 7
    902
    [2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
    } VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"alive","alive"
    :{"hostname":"GIS-DB-SVR1","domainName":"gloscc.gov.uk","osType":"Windows","osVersion":"Windows Server 2008 R2 Service Pack 1","kern
    elVersion":"6.1.7601.18700","arch":"AMD64","guestType":"PVHVM","guestDriverVersion":"3.2.2.0","vmapiVersion":"100"}}}}
    [2015-02-01 16:50:54 10441] INFO (notificationserver:139) Sending notification: {DOMAIN} 0004fb00-0006-0000-fd7d-7ad27e9d7b63 {VMAPI
    } VMAPIEvent {"VMAPIEvent":{"severity":5,"subsystem":"OVMSvcSS","process":"OVMSvc","type":"system","payload":{"type":"IPChange","IPC
    hange":{"intrface":"Oracle VM Virtual Ethernet Adapter","mac":"0021f6000001","ipv4info":{"ipinfo":[{"address":"10.90.0.66","netmask"
    :"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]},"ipv6info":{"ipinfo":[{"address":"fe80::993f:d5f4:599d:fa4%14","netma
    sk":"255.255.255.0","gateway":"","mtu":1500,"speed":1000000000}]}}}}}

  • My iPhone 4s cannot join a public unsecured network but my iPad and macbook can.  I have reset the network settings twice.  Both times it worked, but only for a few minutes.  What can I do?

    My iphone 4s cannot join a public unsecured network, but my ipad and macbook can with no problems.  I have reset the network settings on the iphone twice.  Both times that fixed the problem but only for a few minutes, then I get the "cannot join network" message again.  Please help!  What can I do?

    Anyone have any ideas or information to help with this?  Any help and consideration is MUCH appreciated.

  • Windows 8.1 Pro has error while joining domain, while windows 7 pro has no problem to join in the same network

    I am having the same issue as posted in http://social.technet.microsoft.com/Forums/windows/en-US/6ea57e5f-6e9d-49bd-9dd7-832ea84c0276/windows-81-pro-will-not-join-domain?forum=w8itpronetworking
    There are a few other people have the same issues.  However there was no real solution provided although the post was marked as answered.  I am posting it here again and hopefully I can get some help to solve this issue.
    We got two new PCs, one with windows 7 and the other with windows 8.1 Pro.  In the same network with domain, the windows 7 pc has no problem at all to join the domain.  However the windows 8.1 Pro won't join the domain. On the windows 8.1 Pro computer,
    I can ping the other computers in the network.  The error message says:
    An Active Directory Domain Controller (AD DC) for the domain "cmi" could not be contacted. ...
    In my case, the domain name is "CMI".  I am sure the DNS setting is correct.  What did I do wrong?  Any help is greatly appreciated.  Thanks.

    I tried the solution in that article.
    In HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Netlogon\Parameters folder, there is no
    NeutralizeNT4Emulator.  So I followed the instructions and created one, and set the value to 1. Then I restarted the computer and tried to join the domain again.  I got the same error.  Below is more from the netsetup log file:
    06/04/2014 21:36:37:256 -----------------------------------------------------------------
    06/04/2014 21:36:37:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 1 name
    06/04/2014 21:36:40:256 NetpCheckNetBiosNameNotInUse for 'XPS8700' [MACHINE] returned 0x0
    06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 1
    06/04/2014 21:36:40:256 -----------------------------------------------------------------
    06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'XPS8700' is valid as type 5 name
    06/04/2014 21:36:40:256 NetpValidateName: name 'XPS8700' is valid for type 5
    06/04/2014 21:36:40:256 -----------------------------------------------------------------
    06/04/2014 21:36:40:256 NetpValidateName: checking to see if 'cmi' is valid as type 3 name
    06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid for cmi returned 0x54b, last error is 0x0
    06/04/2014 21:36:40:272 NetpCheckDomainNameIsValid [ Exists ] for 'cmi' returned 0x54b
    ----------------below is the error message from the pop up window
    Note: This information is intended for a network administrator.  If you are not your network's administrator, notify the administrator that you received this information, which has been recorded in the file C:\Windows\debug\dcdiag.txt.
    The domain name "cmi" might be a NetBIOS domain name.  If this is the case, verify that the domain name is properly registered with WINS.
    If you are certain that the name is not a NetBIOS domain name, then the following information can help you troubleshoot your DNS configuration.
    DNS was successfully queried for the service location (SRV) resource record used to locate a domain controller for domain "cmi":
    The query was for the SRV record for _ldap._tcp.dc._msdcs.cmi
    The following domain controllers were identified by the query:
    cmi-dc2.cmi
    cmi-dc1.cmi
    However no domain controllers could be contacted.
    Thanks.

  • I cannot see toolbar with favourites, file etc so i cannot join any pages to my favourites. Where it's gone...?

    I cannot see toolbar with favourites, file etc so i cannot join any pages to my favourites. Where it's gone...?

    Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
    Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
    The F10 can also be used on most PC's to temporarily reveal the Menu bar.
    https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

  • ORA-02047: cannot join the distributed transaction in progress

    Hi All,
    My requirement is to do COMMIT Transactions in BULK like 100 rows. I am doing update in Oracle and SQL Server both. Following statement update the SQL Server side:
    v_sqlstr :=
    'update JDETAIL set interfacedate = getdate() where company ='
    || v_company
    || ' and Recordnumber= '
    || TO_NUMBER (v_recordNumber)
    || ' COMMIT TRANSACTION';
    num_rows :=
    DBMS_HS_PASSTHROUGH.execute_immediate@ex_test (v_sqlstr);
    After this I am calling Oracle Update Procedure . In Oracle UPDATE Procedure when I write AUTONOMOUS TRANSACTIONS AND Commit then it works fine BUT when I don't COMMIT which I don't want because I want to COMMIT in BATCHES then following error is thrown
    ORA-02047: cannot join the distributed transaction in progress
    Thanks

    you can't put the commit transaction into a pasthrough statement.
    Oracle Gateway starts the transaction, so you need to write the code in a way that allows the gateway to perform the commit. When doing a commit in a passhrough statement the gateway has no control over the committed data. Thus you get the error unless you start an autonomous transaction.
    Why do you need to call the update in a pasthrough statement? Why not in a PL/SQl code block with a counter that commits after 100 rows?

  • Join computer in Domain and how to get Internet access in Joined domain computer

    Dear System Admins,
    Actually I am new to this forum and I need help. Let me explain you my scenario. Ours is a small company and I have configured Cisco router with dedicated Public IP. So the private IP default gateway is 192.168.50.254 and DNS is 218.56.43.22 "DNS is
    given by ISP". Now what I did is I have configured IP address to server 192.168.50.1/24. Default Gateway IPv4 address 192.168.50.254 DNS 218.56.43.22 on Windows domain server computer. Internet is up on Windows Server. Also I have setup Active directory
    successfully. Now I want Windows 7 computer to Join the domain and also it should be able to access to Internet. Let me know how to configure Windows 7 network properties and how to join domain. Please explain me in simple way step by step process. Thank you.

    Dear Arnav,
    I have configured DNS as  218.56.43.22 in windows server computer which has given by our ISP and
    internet is available in  server. For users who wants top join domain. I have configured IP details are as follows. 
    1. Windows 2008 Server IP details
    192.168.50.1
    255.255.255.0
    192.168.50.254
    DNS: 218.56.43.22 <--- Given by ISP with Dedicated Public IP
    Now comes the Windows 7 computer which has to be join in domain for that how should I have to configure Network properties of Windows 7 computer? let me know. Windows 7 IP details are as fallows:
    IPV4 address 192.168.50.2
    Subnet Mask 255.255.255.0
    Default GW   192.168.50.254
    What about DNS? What should I configure in DNS box network properties  for Windows 7 user. Shall I enter Windows Server IP details 192.168.50.1 or "DNS 218.56.43.22 <----which is given by ISP" . Let me know further procedure in order
    to "Windows 7 user join the domain as well as user should be able to access the Internet. At present I have only installed active directory in  widnows 2008 server. Whats Next? please feel free to ask me. Thank you.

Maybe you are looking for

  • Jaxb is giving NullPointerException  at com.sun.xml.bind.v2.model.impl.Prop

    Hi, I am getting null pointer exception , i dont whether it is due to jar mismatch or what ??? I have a stand alone application which created java classes from one schema file and , i construct xml file by inputting some values. It works fine in my m

  • How can I fix a problem with PGA Tour shot tracker?

    PGA Tour Shot Tracker will not display for the full field. It appears momentarily and then goes all black. I've disabled FlashBlock, AdBlock, and still no help. It (Shot Tracker) will work for groups and individual players, however.

  • Assertion in oracle sql developer

    Hello all im using oracle sql developer and oracle11g , how can i use assertion for my tables? i searched in internet but there were no useful information thank u in advance best, david

  • Cfdocument - Save ColdFusion Report to RTF without save prompt

    I am attempting to save a Coldfusion report directly to an RTF file.  The following example creates a RTF file but with the SAVE PROMPT windows.  Is there a way to by-pass the save prompt window and save directly to RTF file? <cfdocument format="rtf"

  • HTML Process API

    I am trying to pass arguments to a BPL method using the 'RUN_ITEM' action. I set up the arguments (argument1 and argument2) in the 'reply' task. The task runs fine, however the arguments are not getting passed. My HTML form code is as follows: <br> <